Design, Supply, Fabrication, Erection and Installation of G.I Portable Offices, Tensile Pathway and allied works at Central complex, North Site, BARC, Trombay, Mumbai.

Amount

Design, Supply, Fabrication, Erection and Installation of G.I Portable Office of size 40’ X 10’ (LIFT & SHIFT TYPE) of approved make as per Detailed Technical Specifications attached separately including transportation and placement of porta cabin at desired location as directed by the Engineer-in-Charge. Note: Pre Dispatch inspections of Porta cabin will be carried out during Fabrication and before procurement by Engineer-in Charge.

Design, Supply, Fabrication, Erection and Installation of of G.I Portable Toilet Cabin of size 10’ x 8’ (Lift & Shift type) of approved make as per Detailed Technical Specifications attached separately including transportation and placement of toilet cabin at desired location as directed by the Engineer-in-Charge. Note: Pre Dispatch inspections of Porta cabin will be carried out during Fabrication and before procurement by Engineer-in Charge.

Design, Supply, Fabrication, Erection and Installation of Tensile Fabric Canopy for Pathway as per Detailed Technical Specifications including Primary Steel Structure Work in Mild Steel built up tubular structure including cutting, hoisting, welding, fixing in position and applying a Coat of Duco Paint over one coat of Anti Oxide Primer after Rust Cleaning Process, transportation and placement at desired location as directed by the Engineer-in-Charge. Note: Pre Dispatch inspections of Canopy will be carried out during Fabrication and before procurement by Engineer-in Charge.

From 0.00 to 1.50 m depth from Average Ground Level

Lead charges for 1st 1 KM or part thereof, by mechanical transport including loading unloading, stacking / levelling etc. Note: The rates in respect of Item No 5 is applicable for NET Quantities arrived at after making deduction for voids @ 20% from corresponding STACK / TRUCK Measurement.

Providing and laying in position cement concrete of 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels.

Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge

Providing and constructing Brickwork in cement mortar 1:6 using crushed sand with Flyash / Flyash Lime bricks with minimum 70 kg / Sq. cm strength of approved make and size in Sub structure including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.

Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge.

Providing and laying in position Reinforced Cement Concrete (RCC) of Grade M-25 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level

Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings.

Using TMT bars of specified grades all dia bars. TMT bars to be supplied by the contractor manufactured by approved manufacturers confirming to IS 2062.

Providing Structural steel work in M.S Plain Plates and chequrred Plates for Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc.including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications.

Using materials of approved manufacturers / approved brand of BARC confirming to IS 2062. All test reports to be provided along with the supply of the materials

Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge

Up to and including 300 mm Joists, 350 mm channels, and below sections using materials of approved manufacturers / approved brand confirming to IS 2062. All test reports to be provided along with the supply of the materials.

Providing and Painting two coats of synthetic enamel paint on steel surfaces of approved brand and manufacture to give an even shade over a primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing, centering, shuttering Form work using steel plates, timber planks for all types of structures including necessary strutting, proping, staging, supports, bracings etc. and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels.

For Sub Structure

Providing and Fixing Anchor Fastner - 16 MM diameter 200 mm Long of approved make including drilling in concrete as per requirement for fixing Eps or other structures all as specified by the manufacturer complete all as per specifications and drawings

Providing , Laying , jointing, fixing and testing Heavy quality (C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing Teflon tape, exposed / concealed by chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint for all concealed lines / two coats of synthetic enamel paint for all exposed lines all as directed by the Engineer-in-charge. Pipes with exclusive use of approved make C-Class pipes.

15 mm dia G.I pipe

20 mm dia G.I pipe

Providing & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge

20mm dia

Providing, laying to the slope specified and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the order of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete excluding excavation and refilling which will be paid under relevent Item

100 mm diameter stoneware pipe

Providing and fixing square mouth S.W. gully trap complete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design

150 x 100 mm size gully trap "P" type

Providing and constructing Inspection chambers of Internal size clear dimention of 900 x 600 mm in 230 thick brick masonry with cement mortat 1:4 over a bed of 150 mm thick 1:4:8 cement concrete foundation, plastering with cement mortar 1:4 20 mm thick on inside, out side and all exposed sufaces finished with a floating coat of neat cement, brick corbelling at top to provide opening of 900 X 450 mm, embedding the frame and cover with CC 1:2:4 concrete, and fixing cast iron steps if necessary at 300mm intervals complete . Depth of chamber not exceeding 900 mm. (excavation, soling, cast iron cover and C.I steps will be paid separately under relevant item)

Dismantling plain cement concrete manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in charge

Demolishing C.C / R.C.C works by mechanical means and stock piling at designated locations carefully with out damaging adjacent structures and disposal of dismantled materials up to a lead of 100 m, stacking serviceable and unserviceable materials separately including cutting reinforcement bars all as directed at site.

Dismantling Bituminous road including stacking of serviceable materails and disposal of unserviceable materials within 200 m lead

Dismantling manually / by mechanical means WBM Road including stacking of serviceable materials and disposal of unserviceable materilas within 200 m lead as per direction of Engineer-in-charge

Carrying out Civil Engineering works like surveying & leveling, checking of formwork fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works, and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Note : (1)Each Job shall be carried out by one qualified Degree holder with 1 (one ) year experience/Diploma holder with 3 year experience /Licentiate in Civil/Construction Engineering / Technology conducted by Board of Technical Examinations / University/ Autonomous Govt / Govt recognized recognized Polytechnic/ Institute. (2)Deployment: The contractor shall deploy one Engineer for each job for minimum 26 working days per month for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the person will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account.(3) Period of work: The contractor shall carry out 1 (one)/2 (two) Jobs per month as per requirement at site for the period mentioned in NIT.(4) Mode of measurement : Measurement will be per job basis. A single job shall be carried out by deploying one engineer exclusively for the particular job.(5) Engineer should be engage after scrutiny of BARC Engineers and approved by Competent authority. (6) In case the Engineer does not work for 26 working days in a month, then the payment for the month will be worked out on pro-rata basis considering actual number of working days.

Pick-up light Non-AC vehicle viz. TATA Aria/TATA Sumo gold or suitable vehicle with driver including BA-IV norms on hiring basis for the use of Site Engineer of CED for 6 days a week from 8:00 am to 20:00 pm) for carrying out day-to day official movement within Mumbai and inside BARC premises as per Detailed Technical Specifications attached separately.

S.B. PAWAR SAIRAM CONTRACTORS

shoiab construction

ORIENTAL INTEGRATED FACILITY MANAGEMENT PVT. LTD.