Short Press NIT 12 Item 01

Supply of 10000 Ltrs. Capacity chemical storage tank double layer chemical grade thickness 10mm to 12mm, weight 345 to 350 Kg Make:-Sintex / Rotax/ ISI marked and any reputed make.

Fabrication and Supply of level indicator of 10000 Ltrs. Capacity chemical storage tank included all allied accessories as acrylic tube, butterfly valve, drain valve, elbow union & socket with float etc. complete set with allied works as per Engineer-In-Charge.

Supply of 500 Ltrs. Capacity chemical storage tank double layer chemical grade with level indicator of 500 Ltrs. Capacity chemical storage tank included all allied accessories as acrylic tube , butterfly valve, drain valve, elbo union & socket with float etc. Make:-Sintex / Rotax/ any ISI approved make of Delhi Jal Board

Fabrication, supply & fixing of PAC agitator assembly for raw Sewage Sludge water & channel base frame with 2 HP motor complete set with all allied electrical works with required civil work as per Engineer-In-Charge.

a) Supply PVC Pipe 10kg 50mm – 63mm dia pipe. Make: Prince / Kishan / Suprime b) supply PVC Elbo 50mm– 63mm dia pipe Make : Prince / Kishan / Suprime c) Supply PVC Tee 50 mm – 63mm dia pipe Make: Prince / Kishan / Suprime d) Supply PVC Socket 50mm – 63mm dia pipe Make: Prince / Kishan / Suprime e) Supply of other allied hardware items as PVC Solvent, Nut, Bolts, Double waser clamp with all allied accessories as per site requirement to complete the job in all respect.

Supply and fixing of chemical pump of 10 M3/Hr discharge with 15 meter head fitted with base frame with 3HP/5HP motor and suitable panel and cable size, complete set. Make of motor :Kirlosker / Crompton Make of pump : Ikon / jessco / NE/ any ISI approved make of DJB.

Design and Casting of RCC foundation size- .3048x3.6576x5.4864 Cubic meters suitable for 10000 Ltrs. Chemical storage tank (2nos) including other associated required work at site such as foundation for M.S Structure Isection Beam etc.As per DSR Earth work in excavation for foundation for chemical storage tank by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. As per DSR 2.6.1

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) DSR Code 6.1.1

Over burnt (Jhama) brick aggregate 90 mm to 45 mm cum 793.10 DSR CODE-16.3.5

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer in charge.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. DSR CODE 11.37A

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m :2.10.1 All kinds of soil 2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia DSR CODE-2..10.1

Fabrication of MS structure suitable for 2 nos 500 litter tank at required hight above the channel level for PAC Dosing along with ladder near the distribution channel before PST.Work includes supply of MS plates, I-section Beams, angles and other material require at Site. As per DSR code 10.1,2018.

Fabrication of M.S Ladder for day to day maintenance and dose setting. Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. As per DSR 10.25.1

Supply of JAR apparatus as per BIS Standard. Make:- Swastik / Any DJB Approved.

Installation of above all materials cutting, jointing, making various size of nipples, clamping, complete piping, tanks, pumps & panel with complete testing & commissioning.

Supply of PAC liquid ”ISI Marked” (medium basicity) as per IS 15573:2018, the approximate quantity required for 7.5 MGD of PAC @ 40 PPM- max 50 PPM is 1360 Kg/Day. For 90 days 1360*90=122400 Make:- DJB Approved.

Supply of PAC operator 3 Nos. Semi-Skilled Operator for PAC

defence engineers (india)