Renovation of 20 toilets 12 Toilets in New Block 6 Toilet and Rooms in old block at Ground floor and 2 Toilets in Main Block at Hotel Tamilnadu Ooty Unit I

Amount

Dismantling the existing windows and ventilator and clearing away the debrises from the site. etc complete. Complying with standard specification.

Dismantling the existing EWC with flush tank and wash basin and other accessories and clearing away the debrises from the site etc complete. Complying with standard specification.

Dismantling the existing wall and floor tiles and clearing away of the following items including shifting the unwanted materials to outside the complex with a conveyance upto 10 Km including loading & Unloading charges etc complete. Complying with standard specification.

Clean removing of cement plaster from wall, floor and clearing away the debrises from the of the following items including shifting the unwanted materials to outside the complex with a conveyance upto 10 Km including loading & Unloading charges etc complete. Complying with standard specification.

Plastering with cement mortar 1:3 (one cement and three p- sand), 10mm thick to RCC exposed faces in all floors with standard specification and as directed by the departmental officers.

Plastering with cement mortar 1:5 (one cement and five p-sand), 20mm thick in all floors including curing etc complete complying with standard specification and as directed by the departmental officers

Daddoing the side walls with vitrified designed tiles of approved quality, colour of size 600 x 300 x 8 mm in cement mortar 1:2 over a base plastering with CM 1:5(one cement and Five sand) including pointing with same colour cement over a base plaster with CM 1:3 including cost and conveyance of all material complying with standard specifications.

Flooring with vetrified tiles of approved quality, colour design and of size 600 x 600x8mm laid in cement mortar 1:3, 20mm thick including pointing the joints with same colour cement to the full depth of the tiles including cost and conveyance of all.

Finishing the flooring with Antiskid tiles of approved quality, colour, design and of size 30cm x 30cm x 6cm laid in cement mortar 1:3, 20mm thick including pointing the joints with same colour cement to the full depth of the tiles as per standard specifications.

Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

Above ground level 4.50 m height

Supplying and erecting shuttering including necessary support using steel shutters for plain surfaces such as column footings, kerb wall and grade beam / plinth beam etc.requiring nominal strutting and removing the same after completion of specified period without disturbing the concrete etc. complete complying with standard specification

Supplying fabricating and placing in position of MS or RTS rods for all RCC works including cost of steel binding wire and labour charges to fabrication but excluding the cost of concrete and centering as per standard specification.

Supplying and fixing of Jet black granite slab 20mm thick over RCC slab using in CM 1:3. Charges including cutting ,cost of materials and conveyance charges etc complete as per standard specifications

Labour charges for grinding the granite slab edges into half round shape including cost of cutting blade and labour charges for grinding etc as per standard specification.

Supplying and fixing in position of white colour single piece wall mounted closet with soft closing seat cover of size 395x710x7307mm (Jaguar Model or equvalent) etc complete with standard specifications.

Supplying and fixing white colour oval shape table top wash hand basin of size 410mm x 410mm x 140mm (Jaguar Model or equvalent ) approved make with necessary 1/2” CP central hole basin mixer 1/2” CP waste coupling with bottle trap 1/2” CP angle valve 1/2”PVC Nylon connection etc., complete.

Supplying and fixing Towel rack 600MM of approved make (Jaguar Model or equvalent) as per standard specification.

Supplying and fixing robe hook for WC (SS) Size12mm of approved make (Jaguar Model or equvalent) as directed by the Corporation officers.

Supplying and fixing 1/2" brass CP wall mixer unit 3 in 1 half turn of approved make (Jaguar or equvalent) along with 1/2" CP shower arm , 1/2" CP shower rose and Hand shower as per standard sepcification.

Supplying and fixing 1/2" CP Health unit with 2 way bib cock with wall flage of approved (Jaguar or equvalent) quality as per standard specifications.

Supplying and fixing CP Soap dish of approved make (Jaguar Model or equvalent) as directed by the Corporation officers.

Supplying and fixing Paper Roller of approved make (Jaguar Model or equvalent) as directed by the Corporation officers.

Supplying and fixing in position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality fixed over a bed of brick jelly lime concrete 1:2:5 (one part of lime, two part of sand and five part of 40mm brick jelly)

Supplying, laying, jointing in position of best quality 75mm & 110 mm dia PVC waste pipe (6kg / cm) of approved make (Finolex) and providing leak proof joints including making connection to all sanitary fittings, dismantling, masonry, RCC works wherever necessary and making good and dismantled portion complying with standard specifications.

75mm dia PVC waste pipe (6kg / cm)

110mm dia PVC waste pipe (6kg/cm)

Laying and jointing the following dia PVC specials suitable for 6kg/cm2 pipe.

75 mm dia PVC Elbow

75 mm dia PVC Bend

75 mm dia PVC Tee with single door

75 mm dia PVC vent cowl

110 mm dia PVC elbow

110 mm dia PVC Bend

110 mm dia PVC Tee with single door

110 mm dia PVC vent cowl

Supplying, laying and jointing of 25mm dia CPVC (Chlorinated poly vinyl Chloride) pipe (Higher pressure rating with higher pipe thickness) Standard Dimension Ratio - 11 and cutting, threading of pipes and concealing the pipes inside wall with necessary clamps and nails for 1 RM.

Supplying and fixing of 25mm dia (Chlorinated Poly Vinyl Chloride) Union of approved make as per standard specifications

Supplying and fixing of 25mm dia ball Valve (Chlorinated Poly Vinyl Chloride) of approved make as per standard specifications

Brick jelly lime concrete 1:2:5 (One lime two sand and five brick jelly) using broken jelly 20 mm etc complete as per standard speicfication.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Ventilator of casement from the profile the size of outer frames 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frames and shutter the shutter will be provided with Espag multi power point lock and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow lwakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and per size for arresting noise and energy loss. The coonecting mechanism between sash and outer frames that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Assistant Executive Engineer before use on work

Supplying, fabrication and fixing of 30mm thick both side pre laminated WPC door shutter with frame of required size including necessary furniture fitting such 125mmx25mm power coated hinges-3 Nos, 150mmx12mm power coated tower bolts, 150mm power coated handles, Teak wood lippings around the shutter etc including cost, conveyance of all materials and labour charges for fixing complying with standard specification.

Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications and as directed by the departmental officers. (The wall putty shall be got approved by the Assistant Executive Engineer before use of work).

Painting two coats of existing wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Providing Polymer coating (Water proof coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Applying first coat as directed by the department

Supplying and Fixing door shutter alone of size 3'0" X 6'9" using Sharon Ply 30mm Thick flush door. Both side pasted with 1mm thick gray grains laminate from Stylam and fitting are finished with brass with ss coating 5" Hinges - 4Nos, aldrop - 1 No , 6"Tower Bolts - 1 No, 8" Tower bolts - 1 No, 8" handle - 2 Nos and door stopper - 1No from Labacha or Equivalent as approved by the Architect. Door all round edges 1.5" X 0.5" Teak wood beeding fixing. Fevicol SH, Heatx, screws & nails as per required etc complete as per directed by corporation officer.

Supplying and Fixing for Toilet door shutter alone of size 2'6" X 6'9" using Sharon Ply 30mm Tk flush door. Both side pasted with 1mm tk gray grains laminate from Stylam and fitting are finished with brass with ss coating 5" Hinges - 3 Nos, 6"Tower Bolts - 1 No, 8" Tower bolts - 1 No, 8" handle - 2 Nos from Labacha or Equivalent as approved by the Architect. Door all round edges 1.5" X 0.5" Teak wood beeding fixing. Fevicol SH, Heatx, screws & nails as per required etc complete as per directed by corporation officer.

Providing and fixing 18mm thick waterproof plywood from Ambiply / Kitply or equivalentof cot of size 6'3" x 6'9"x1'6" .The Top surface , around the side and intermidate support are also made 18mm thick waterproof plywood and pasted with 0.8mm thick white liner laminate from Merinolam and 1mm thick specified Suede finish laminate from Merinolam for all the exposable surfaces and edges are pasted with 0.5mm thick pvc edge beeding as per standards etc complete as per standard specification

Providing and Fixing of cot side ledge work size 2'3" X 1'0" using Ply in 1.25" Thick finish. Both side pasted with 1mm thick gray grains laminate from Stylam. Charges including for Fevicol SH, Heatx, screws & nails as per required etc complete as per directed by corporation officer.

Supplying and fixing panelling at cot rear side wall of size 12'0"x4'0" by using 50mm x 25mm aluminium frame box sections screwed upto the painted wall with steel screws then cladded with 12mm thick waterproof plywood ( Ambiply / Kitply ) pasted with 1mm thick specified laminate from Merinolam edges are pasted with 0.5mm thick pvc edge beeding as per standards etc., complete as per directed by corporation officer.

Supplying and Fixing TV unit ledge with luggage Rack of size 7'0" X 2'0" using Ply in 1.25" Thick finish. Exposed area pasted with 8mm thick gray grains laminate from Stylam. 1.5" X 0.25" Teak wood beading fixing. Charges including Fevicol SH, Heatx, screws & nails as per required etc complete as per directed by departmental officer.

Supplying and Fixing TV unit ledge of size 3'0" X 0'10" using Ply in 1.25" Thick finish. Exposed area pasted with 8mm thick gray grains laminate from Stylam. 1.5" X 0.25" Teak wood beading fixing. Charges including Fevicol SH, Heatx, screws & nails as per required etc complete as per directed by departmental officer.

Supplying and fixing wardrobe of size 3'0" x 2'0" x 7'0" by using 16mm thick waterproof plywood from Ambiply / Kitply or equivalent pasted with 0.8mm thick white liner laminate from Merinolam and 1mm thick specified Suede finish laminate from Merinolam for all the exposable surfaces. Hinges and SS handles, lock , drawer telescopic channels and towerbolts are from Ebco / Europa or equivalent . Shutters edges are pasted with 2mm thick pvc edge beeding from Rehau / Star trimmed as per standards and the internal carcase edges are pasted with 0.5mm thick pvc edge banding etc complete as per directed by Departmental officer.

Supplying and fixing of frame Bed Room Door frame Paneling work using 0.75" tk Ply upto 6" using Grey Grains Laminate from Stylam. Paneling edges all round 1" X 0.25" Teak wood beeding fixing. Charges including for Fevicol SH, Heatx, screws & nails as per required etc complete as per directed by Departmental officer.

Supplying and Fixing toilet Door and rear door frames Teak Beeding work 1" X 0.25" Teak wood beeding fixing. Charges including for Fevicol SH, Heatx, screws & nails as per required etc complete as per directed by Departmental officer

Supplying and fixing curtains using best quality colth with design as approved inculding 1" ss curtains square rod with brackets. Charges including for cost of materials and conveyance etc complete as per directed by Departmental officer.

Painting the wall with two coat concrete Texture finish paint over new painted wall including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying and Fixing of Dressing mirror work size 2'0" X 4'0" by using 0.5mm thick mirror pasted with silicon. Charges including for Screws & nails as per required etc complete as per directed by corporation officer. as per directed by Departmental officer.

Supplying and Fixing of Picture Art of size of 3'0" x2'0" using teak wood beeding around, rear side 3mm MDF and front side is covered with 4mm galss which is approved by the Departmental officer-in-Charge.

Providing and fixing teapoy of size 3'0" x 1'6" x1'6" by using 16mm thick waterproof plywood from Ambiply / Kitply or equivalent Exposed area pasted with 8mm thick gray grains laminate from Stylam approved design and make etc complete as per directed by Departmental officer.

Providing and fixing dressing chairs as per the approved design and make by using 2'0" x 1'6"tapered legs , 1'6"x1'6" seater frames , 12mm ply with 100mm cushion upholstered with specified fabric. Fabric basic cost Rs : 350/- metre. Exposed area pasted with 8mm thick gray grains laminate from Stylam etc complete as per directed by Departmental officer.

Providing of single seater chair of approved designg make by using 1st quality teak wood timber finished with walnut matte finish ( hand polish ). The quoted rate includes 2 nos of loose upholstered cushion of thickness 4" etc complete as per directed by Departmental officer.

Supplying and Fixing of Wash basin mirror work for size 2'0" X 2'0" using 0.75" thick ply background the mirror area. 0.5mm thick mirror fixing using silicon and all round aluminium profile. Charges including for Screws & nails as per required etc complete as per directed by Departmental officer.

Plain cement concrete 1:2:4 (one cement two M- sand and four jelly) using 20mm HBS jelly of BSS gauge for foundation and flooring as per standard specifications.

Providing & fixing Gypsum board plain ceiling using perimeter channel fixed with wall and suspending G.I. Intermediate channel from the soffit at 1220mm centre with ceiling angle to fixed G.I. Cleat and steel expansion fasteners ceiling section fixed to the intermediate channel at 600mm centre and 12.5mm thick Gypsum board is then screw fixed to ceiling section with 25mm screws at 300mm centers. Finally the Gypsum board are to be jointed and finished with jointing compound, jointing paper tape.

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator)

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good ofthe concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil)

Wiring with 2 x 4 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitablePVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point ( 8 points / Coil)

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour

Supply and run of RG-6 unarmoured coaxial cable for TV in suitable PVC rigid pipe concealed in wall and ceiling with making good of the concealed portion with suitable colour.

Supply and run of 2 pair unarmoured telephone cable in suitable PVC rigid pipe concealed in wall and ceiling with making good of the concealed portion with suitable colour.

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections.

Supply and fixing of 30 Amps 2 module key tag including giving electrical connection etc., complete.

Supply and fixing of RJ 11 fase plate in concealed with Module GI box and making good of the concealed portion with suitable colour.

Supply and fixing of TV Modular socket in concealed with Module GI box and making good of the concealed portion with suitable colour.

Supply and fixing of 3 inch 9 watts warm white recess mounted fixed LED downlight made of extruded aluminium housing and high power LED as a light source with clear diffuser and separate electronic driver including giving electrical connection etc., complete.

Supply and fixing of 2 feet 9 watts warm white mirror light fitting on surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver including giving electrical connection etc., complete.

Supply and fixing of 4M LED foot lamp with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections.

Supply and fixing of LED strip Light fitting with including wiring and electrical connection complete etc.,

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall including giving electricla connection etc., complete.

Supply and fixing of Beetel BLL corded landline phone with 2 meter RJ11 telephone line wire patch cable compatible for landline etc., complete.

Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable Module GI switch box with push switch including giving electrical connection etc., complete.

Supplying and fixing of fancy outdoor fitting of LED 10w. Charges including for cost of materials and labour charges etc complete

Supplying and fixing of hanging fitting with 9w bulb. Charges including for cost of materials and labour charges etc complete

GST at 18%

SUBRAMANIAM R (BID ID -1498867)