Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.5 LAccepted-AOC RZ F1 104 MAHAVIR ENCLAVE PALAM NEW DELHI 110045 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110045 | L1 | Accepted-AOC DUE TO L1 | |
| 2 | L2₹38.7 L+₹1.4 L (3.87%)Rejected-AOC WZ143 A 7 A S 4 43 GALI NO 2 OLD MAHABIR NAGAR NEW DELHI 110018 | NEW DELHI | NEW DELHI | DELHI | 110018 | L2 | Rejected-AOC HIGHER RATE | |
| 3 | L3₹41.2 L+₹4.0 L (10.6%)Rejected-AOC | L3 | Rejected-AOC HIGHER RATE |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
25 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NEW DELHI
GE NEW DELHI SP MARG NEAR ABHM GATE NO 5 NEW DELHI
REPAIR / MAINTENANCE OF CERTAIN ITEM OF JOINERY WORKS AND WELCOME MAINTENANCE INCLUDING CONNECTED WORKS IN MD OFFICERS ENCLAVE IN THE AOR OF AGE B/R SP MARG UNDER GE NEW DELHI
2023_MES_591814_1
GE/ND-15/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE NEW DELHI
REFER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE NEW DELHI
₹90,000
Yes
15 Jan 2024
27 Apr 2023
27 May 2023
27 Apr 2023
25 May 2023
11 May 2023
Amount
M&L for taking down cement or cement lime plaster any description incl racking out joints, hacking for key , scrubbing down with water etc including removal of debrish from the MOD land complete all as specified and directed.
S&F stainless steel drappery rods 25mm dia confirming to Gde 340 and having wall thickness 1.40 mm (minimum) with two number brackets and two numbers of knob for each curtain rod ( length varying from 1.1. to 2.50 RM) fixed to brick/concrete wall knobs on each end of curtain rod .(Fixed in repairs)
Dismantling timber scantling as in fillets , rails , post ,rafters, purlins, etc under 40 Sq. cm in section in unframed work complete all as specified and directed.
M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 3 Sq.cm and not exceeding 6 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified and directed.
M&L for Beads of 2nd class hard wood, straight (any size) for glazed or gauged joinery, renewed, including mitres etc,. and removing old beads as in repairs complete all as specified and directed.
Continuous (piano) hinges, mild steel, bright finish or electrogalvanised ,Width of flap (when open), 40 mm complete all as specified and directed.(fixed in repairs)
40 mm dia , cupboard knobs fixed with nut , screw and washer of stainless steel complete all as specified and directed.(fixed in repairs)
Ball catcher with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.(fixed in repairs)
Double aluminium channel size 10x20x2mm, complete all as specified.(fixed in repairs)
MS roller with "C" shape stapple, chromium plated for 5.00 mm thick sheet glass, complete all as specified and directed.(fixed in repairs)
M&L for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples and fixed in repairs complete all as specified and directed.
M&L for 18/19 mm thick prelaminated particle board, interior grade,prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in CB shutter, showcase frame, shelves, with 6 mm thick teak wood liping alround incl polishing to lipping and all as per specified and directed.(fixed in repairs)
M&L for Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.
M&L for Glazed ceramic walls tiles coloured (300 x 200 mm/350x250mm/450x300mm/300x450), 6/7mm thick, for works on vertical surfaces such as skirting/dados of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick on fair faces or other than fair faces of brick work in cement mortar 1:4, finished even and fair as in backing layer complete all as specified and directed.
M&L for Non skid ceramic floor tiles 7 to 8 mm thick (square/rectangular) coloured , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match laid over screed bed or bedding layer in cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed.
M&L for Glazing with plain sheet glass, ordinary quality, 4 mm thick and glazing with oil putty or aluminium or PVC / wooden beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.
M&L for Glazing with 5.5mm thick sheet glass, ordinary quality, of any size as in aluminium window and including grinding of edges for showcase sliding shutter and shelves incl fixing brakets complete complete all as specified and directed.
M&L for Glazing with figured glass (Frosted), pin head type, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, oncrete or brick surrounds, or aluminium glazed with putty or fixed with beads
M&L taking down existing steel rolling shutter incl hood cover pull & push type not exc 12 Sqm area of clear opening and cleaning the sides of shutters suspensions shafts,anti-guide channels and greasing all the moving parts of rolling shutters and straightening rolling shafts and replacement of any necessary parts required to make the shutters moving smoothly and entire rolling shutters shall be made functional upto the entire satisfication of Engineer -in-Charge and refixing the same incl hood cover complete all as specified and directed.
S&F MS Night latch of 100mm size 4 lever complete all as specified including fixed in repairs. Make- Godrej
S&F mild steel framed work as in grills, gratings etc with end of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed ballustered, walk ways, railing and similar works confirming to Fe 290 Gde E-165 including necessary welding required at site to increase the existing railing height in balacony of Md Offrs Qtrs complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description no other wise provided for as in covers of water tanks.
M&L applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of new steel surfaces complete all as specified and directed.
S&F in repair wire netting of stainless steel wire 1.4 mm dia fixed with tinned tacks of stainless steel wire staple size of mesh 12mm.
M&L Preparation of New wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer.
M&L for preparation of old decorated plastered or unplastered surfaces of walls including cornice, pillaster, etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds moss and efflorescent salt and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of wall complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of walls including complete removal of existing surfaces by using mechanical scrapers and filling holes with putty etc and applying two coats of white wash on old decorated surfaces of wall complete all as specified and directed.
-Ditto-, All as per item No. 1 herein before but as on ceiling.
-Ditto-, All as per item No. 2 here in before but as on ceiling .
Complete removal of existing old treatment on surface from walls using mechanical scrapper only and filling holes of nails with putty etcand applying a coat of uniform ( average 1.50 mm thickness) of cement base wall cae putty of approved make (Birla/JK) to the entire surface of walls surfaces finished even and smooth and then applying a coat of alkali resistant primer over putty surface and finally applying two coats of oil bound distemper on wall surface to give an even and smooth surface complete all as specified and directed. Make :- Asian Paints(Royale), ICI Dulux/Nerolac paints/Berger (Bishon). Distempering shall be carried out by paint roller only.
M & L for applying one coat of distemper oil emulision (O.B.D) white or tinted (As approved) on walls/vertical surfaces including preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and directed.Distempering shall be carried out using paint roller only.
M & L for applying one coat of distemper oil emulision (O.B.D) white or tinted (As approved) on ceiling surfaces including preparation of old decorated surfaces of ceiling by washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and directed.
M & L preparation of old painted surfaces of wood or wood based materials of any discription not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
-Ditto- all as per item No 08 above but two coat.
M&L for Preparatiopn of old painted surfaces of steel and iron surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified and directed.
-Ditto- all as per item No 10 above but two coat.
M&L for Preparatiopn of old painted surfaces of steel and iron surfaces as in eaves gutter and pipes any description not exe 60 Cm girth including holderbats, distance pieces, etc and applying one coat of synthetic enamel paint all as specified and directed.
M&L for Preparing old painted surfaces of brick,stone,concrete, asbestos cement or plaster surfaces of any description over 10 cm girth or width, not otherwise described and painting with one coats of synthetic enamel paint complete.
M&L for one or more coat of french polish on old surfaces of any description, width or girth incl cleaning and preparing old wooden surfaces complete all as specified and directed.
M&L for 15mm thick reeady mix plaster in patches of (Make Ultra tech) on any surfaces of brick/concrete includidng aapplication of bonding coat as per manufacturers instruction including finished even and smooth complete all as specified and directed.
M&L for 15 mm thick reeady mix plaster in patches of (Make Ultra tech) on any surfaces of brick/concrete includidng aapplication of bonding coat as per manufacturers instruction including finished even and smooth complete all as specified and directed as in ceiling/soffits.
M&L for preparation of new plastered or unplastered surfaces of walls and applying three coat of white wash complete all as specified and directed.
M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.
M& L for applying two or more coats of oil bound distemper on newly plastered surfaces of walls including a coat of 1.50 mm thick (average) wall care JK putty to give an even and smooth surface including preparation of new surfaces all as specified and directed.(Note-Payment shall be made for two coats only ) complete all as specified and directed. Make Asian paints (Royale) ICI Dulux /Nerolac paints /Berger (Bishon). Distempering shall be carried by using paint roller through authrosed applicator only.
M&L for touch up of distemper applying ( two or more coat) on walls area of distemper not exceeding 4 sqm ,match to existing shade of wall including preparation existing surface complete all as specified and directed.
M&L for refixing of shutters of any description in same opening after taking down for resecuring ,easing, repairing etc exc 1.0 sqm but n exe 2.0 sqm complete all as specified and directed..
M&L for dismantling of stone slabs and tiles of any description or thickness as in floors and aprons etc.laid, bedded and pointed in cement mortar including screed bed of any description and removal of debris complete all as specified and directed.
M&L for Cutting chases in Brick walls, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete all as specified and directed.
M&L for Marble work 18 to 20mm thick, Granite, (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, bedding layer of cement mortar 15 mm thick in CM 1:6 complete all as specified.
M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 6 Sq.cm and not exceeding 13 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified and directed.
Tubular towel rail 20mm dia 'D' type brass chromium plated 60 cm long between flanges fixed complete all as specified and directed.(fixed in repairs)
M&L for light shade Vitrified ceramic tiles 10 mm thick ( square / rectangular) polished , area of each tiles not exe 0.36 sqm , in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement incl incl screed bed or bedding 15 mm thick in CM 1:6 for laying floor finished complete all as specified and directed.
Ditto - as all as per item No. 41 above but on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.
Taking up or down steel tubing and connection incl cleaning for refixing or removal to store for 15 mm dia pipe complete all as specified and directed.
M&L for Mild steel galvanized steel tubing of 15 mm bore with screwed socket joints as in concealed /open pipe work , medium grade, together with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors complete all as specified and directed.
M&L for Bib taps, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed down screwed for iron pipe, 15 mm bore complete all as specified and directed. (fixed in repairs)
Bib tap, 15 mm bore, stamdard of PTMT any colour high pressure screwed for iron pipe and fixed in repair.
Brass chromium plated toilet paper holder, fixed to wall with CP brass screws complete.(fixed in repairs)
Stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete (fixed in repairs) .
Stop valves(angle valve type), cast copper alloy, fancy type chromium plated of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete (fixed in repairs) .
PVC connections 15 mm size with PTMT nuts of length 600 mm. (fixed in repairs)
Toughened glass, 5.5mm thick, bathroom corner shelf of size 300mm with stainless steel railing and stainless steel fasteners fixed on wall complete (fixed in repairs)
Vitreous China wash down water closet pan (Pedestal Pattern) and trap (standard pattern) white including fixing bolt complete as fixed in repair.
Plastic water closet seat, white , closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing (fixed in repairs) complete.
PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 liters, low level, White with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description complete all as specified and directed.
Health faucet Chromium plated brass with 1.50 m long flexible pipe for WC .(fixed in repairs)
M&L for Vitreous, China wash basin, white , flat back , size 550x 450mm excluding taps, waste chain and plug and porcelain stopper but including the brackets, 32mm dia brass chromium plated waste coupling and PVC waste pipe complete all as specified and directed.(fixed in repairs)
M&L for Sink with drainage board made of stainless steel 1 mm thick kitchen sink with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including cantilever bracket and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm inculding taking down the old sink of any description complete all as specified and directed.
Brass CP mixer (Central hole basin mixer) , for mixing hot & cold water screwed down for iron pipe 15 mm bore complete all as specified and directed. (fixed in repairs)
M&L for PVC mirror cabinet of size 330 mm x 430 mm with openable single looking mirror with PVC inner & outer shelves of any colour, including taking down old looking mirror & wooden cupboard mirror complete (fixed in repairs) all as specified and directed.
M&L for Brass chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.(fixed in repairs)
M&L for Glass self assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromoium plated bracket guard and railing 60 cm long complete all as specified and directed.(fixed in repairs)
M&L for Brass chromium plated shower rose with swivel joints, 125 mm dia with CP neck including fixing to steel pipe or union 15 mm nominal bore complete all as specified and directed. (fixed in repairs)
Demolition of cement concrete of any description and in any position, provided for and removing rubbish out of MoD land complete all as complete all as directed.
Supply only water proofing compound (PIDIPROOF-LW PLUS) or equivelent.
M & L for Plain cement concrete (1:5:10) type E-2 using 40mm brick course aggregate as in filling under floor as in sunken portion complete all as specifed and directed.
M&L for 40mm th PCC 1:2:4 type B-0 (using 12.5mm graded aggregate) as in flooring, finished fair and even, mixed with water proofing compound Dr FIXIT PIDIPROOF-LW PLUS or equivalent (as per manufacturer's instruction) as approved by GE complete all as specified and directed.( Note : WPC shall be measured and paid separately.)
M&L for 15mm thick cement plastering on brick or conc surfaces in CM 1:3 finished even & smooth without using extra cement mixed with water proofing compound Dr FIXIT PIDIPROOF-LW PLUS or equivalent (as per manufacturer's instruction) as approved by GE complete all as specified and directed.( Note : WPC shall be measured and paid separately.)
S & F spun cast iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint laid in trenches or floors, including tacking down old unserviceable CI pipes complete all as specified
S & F spun cast iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to wall on any height of building incliding tacking down old unserviceable CI pipes complete all as specified
S & F spun cast iron soil, waste and vent pipe, 100mm bore, in any length with or without ear with cement joint laid in trenches or floors, including tacking down old unserviceable CI pipes complete all as specified
S & F spun cast iron soil, waste and vent pipe, 100mm bore, in any length with or without ear with cement joint fixed to wall on any height of building incliding tacking down old unserviceable CI pipes complete all as specified
S&F stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 75mm bore pipe complete all as specified and directed.( Fixed in repair)
S&F stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 100mm bore pipe complete all as specified and directed.( Fixed in repair)
S & F CI bends 75mm dia (any radius), diminishing pieces or tapers( larger bore measured), with oval access door complete all as specified and directed.( Fixed in repair)
S & F CI bends 100mm dia (any radius), diminishing pieces or tapers( larger bore measured) with oval access door complete all as specified and directed.( Fixed in repair)
S & F CI bends 100mm dia (any radius), with duck's foot or heel rest complete all as specified and directed ( Fixed in repair)
S&F 100mm bore CI branch pieces,single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches,with oval access door complete all as specified and directed. ( Fixed in repair)
S&F CI nahani trap with grating including jointing to waste pipe , dia of outlet 75mm fixed in PCC 1:2:4 type B1 all as specified and directed. (ISI Marked)( Fixed in repair)
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to walls including tacking down PVC pipe complete all as specified & directed
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. including tacking down PVC pipe
S&F 110mm PVC(SWR) bends any radius complete all as specified and directed. ( Fixed in repair)
S&F 75mm PVC(SWR) bends any radius complete all as specified and directed. ( Fixed in repair)
M&L for Glazed ceramic walls tiles coloured (300 x 200 mm/350x250mm/450x300mm/300x450), 6/7mm thick, for works on vertical surfaces such as skirting/dados of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick on fair faces or other than fair faces of brick work in cement mortar 1:4, finished even and fair as in backing layer including dismantling existing broken/cracked tiles including removing rubbish off the premises complete all as specified ( To match size of existing tiles).
M&L for Non skid ceramic floor tiles 7 to 8 mm thick (square/rectangular) coloured , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match laid over screed bed or bedding layer in cement mortar 1:6, 15 mm thick for laying floor finishes including dismantling broken/cracked tiles and removing of rubbish off the premises complete all as specified and directed.
M&L for light shade Vitrified ceramic tiles 10 mm thick ( square / rectangular) polished , area of each tiles not exe 0.36 sqm , in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement incl incl screed bed or bedding 15 mm thick in CM 1:6 for laying floor finished including dismantling broken/cracked tiles and removing rubbish off the premises complete all as specified and directed.
Ditto - as all as per item No. 90 above but on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for touch up of distemper (applying two or more coat ) on walls area of distemper exceeding 4 sqm not exceeding 12 sqm ,match to existing shade of wall including preparation existing surface complete all as specified
S&F in repairs stainless steel plate rack of size 900 X 775 X 250 mm, made out of 1.00 mm thick steel sheet fixed to walls incl rawl plugs, drilling etc complete incl taking down old wooden plate rack of make- Shakti model No KR-567 complete all as specified and directed..
M&L treating at points of contact of wood work by chemical emulsion ( in oil or kerosene based solution) @ 0.50 Ltr/hole by drilling 6 mm dia holes at the down ward angle of 45 degree a 150 mm centre to centre and sealing the same to match the specification of existing finishes complete all as specified and directed.
S&F in repairs floor door stoppers of aluminium alloy body and tounge, anodised,with hard drawn steel spring over all length of cover plate is 140 mm complete all as specified.
S&F in repairs aluminium anodised hook and eye of 200 mm long complete all as specified and directed.
M&L for 15 mm thick ready mix plaster in patches of (Make Ultra tech) on any surfaces of brick/concrete including application of bonding coat as per manufacturers instruction including finished even and smooth complete all as specified and directed as in ceiling/soffits.
Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each.
Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sq.m each.
Taking down chowkats or frames not exceeding 1.5 Sq.m each.
Taking down chowkats or frames exceeding 1.5 Sq.m but not exceeding 4.0 Sq.m each.
Refixing of shutters in same opening of any descrption after easing and adjusting , n exc 1.00 Sqm.
Refixing of shutters in same opening of any descrption after easing and adjusting , exc 1.00 Sqm but n exc 2.00 Sqm.
Taking down shutters of any description n. exc 1.00 sqm each.
Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each .
Plain Solid, straight chowkats and frames of second class hard wood (suitable for joiner’s and carpenter’s work), wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.
Stainless steel fastner of size 200 to 250mm for fixing wooden door frame and like in postion
MS flat iron as in hold fast, bands,straps, supports or stays for rain water, ventilating pipes, including bolts, if required hook (stay), heavy, for large gates;hook and pintle hinges large hasps andstaples; chains, hand madesliding bolts; clamps; hold fasts; wall ties, hooks for hangingfans; plainangle cleats forsecsuring purlins to wood trusses orrafters; knee piece inserts; twoway and three way straps, plate washers and similar small articles conforming to Fe-290Gde-E-165 all as specified and directed.
PCC 1:2:4 type B-1 (20mm graded agg) as in anchorging hold fast etc bed plate etc all as specified and directed.
S&F second class hard wood 35mm thick glazed and skelton door shutters, open rebated and prepared to receive glass, gauge etc( without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, fixed to chowkats, sizes of members of shutters as specified and directed.
2nd class hard wood 30mm thick glazed and skelton window and ventilators shutters, open rebated and prepared to receive glass, gauge etc( without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, fixed to chowkats, sizes of members of shutters as specified and directed.
S&F 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side with teak wood lipping on edges of shutter all as specified and directed.
S&F aluminium sheet, plain, 0.5 mm thick , including taking down old sheet from doors all as specified.
S&F Solid PVC Door frame of size 50 mm x 95 mm made out of 5 mm single side prelam PVC sheet reinforced with M.S tube supplying and fixing in opening as per specification and drawing.
S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet reinforced with M.S tube supplying and fixing in opening as per specification and drawing.
S&F Factory made solid PVC moulded door shutters (with particle board core), 28 to 30mm thick (Stiles) with 2, 4, or 6 raised panel (as ordered) design with 2mm thick moulded prelam PVC sheet on the front face and 2mm prelam PVC sheet on back face, supply and fixing in frame at site as per the specification and drawing.
S&F Factory made solid PVC door shutter 30mm thick (stiles),wire gauzed i.e. panel will be of wire gauzed in lieu of PVC sheet panel both side prelam. The wire gauzed shall be wrapped an additional square 8mm mild steel solid tube & this tube shall be welded to mild steel tubes. The wire gauzed shall be steel wire cloth 0.40mm nominal dia of wire and average width of aperture 1.40mm fixed and strectched to tighten firmly and drawing on Sl Page 159 of SSR (Part - II) complete all as specified and directed. Make : Rajshri Plastic wood/Hindopan/Sintex
S&F Factory made solid panel PVC window/ shutter 30 mm thick (style),but fully glazed i.e. glass pane used instead of 5 mm single side prelam PVC sheet panel. Shutter frame made out of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20 mm widthstuck inside with solvent cement for stiles and single side prelame PVC sheet for top & bottom rail on either side & as gap insert for top rail & bottom rail.Glass pane to be fittedwith suitable PVC sheet beading and joined together with solvent cement complete all as per specification & drawing.
S&F Factory made solid panel PVC window shutter 30 mm thick (style),but fully wire gauzed i.e. wire gaized used instead of 5 mm single side prelam PVC sheet panel. Shutter frame made out of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded single side prelam PVC 'C' channel having a PVC sheet strip of 20 mm widthstuck inside with solvent cement for stiles and single side prelame PVC sheet for top & bottom rail on either side & as gap insert for top rail & bottom rail.The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be streched to tighten firmly complete all as per specification & drawing.
S&F Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 13 Sq.cm and not exceeding 25 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails.
S&F Aluminium anodized barrel tower bolt of 200 mm length of extruded section complete all as specified.
S&F Aluminium alloy anodised sliding door bolt, of size 300mm, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast aluminium alloy,complete all as specified.
S&F Stainless steel butt hinges of size 75mm fixed complete all as specified.
S&F Stainless steel butt hinges of size 100mm fixed complete all as specified.
S&F Double action spring hinges,of size 150mm, mild steel with steel wire spring, stove enamelled , black, fixed in repair
S&F in repairs hellical door spring 150 mm long mild steel ordinary rat rail rod pattern door springs including roller and roller plate , complete all as specified. .
S&F Aluminium handles,cast type, anodised 100 mm long, fixed , all as specified and directed.
S&F Aluminium handles,cast type, anodised 150 mm long, complete all as specified and directed.
S&F Aluminium Wardrobe hooks (single) of size 50mm to 60mm, fixed in repairs.
S&F Aluminium plate type II, hooks and eyes 150 mm size for gates and shutters as in fixed in repairs complete all as specified and directed.
S&F Hasp and staples,size 100mm, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws, fixed in repairs.
S&F Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor over all length of cover plate 150 mm.
S&F Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples.
S&F in repairs PVC door seal of width 50 to 80 mm and having thickness 3 to 5 mm upto maximum 900 mm long complete all as specified and directed.
S&F Magic eye for main door , fixed in repairs.
S&F 18/19 mm thick PVC solid both side prelam celluca plyboard for cabinet boxes & shutter , cup boards, showcase etc with shelf and shutter incl lipping to edges of exposed surface incl provn of fixing arrangement.(fixed in repairs)
S&Fin repairs factory made PVC Kitchen cabinet 300 mm deep (clear) and required size of thickness 18mm one side pre laminated Celluca ply manufactured by an ISO certified company having density not less than 600 kg/cum for cabinet sides, shelves, parititons, top and bottom, sides, shutters with hinges, knobs, magnetic ball catcher including backing of cabinet fixed with each other with steel screws and solvent cement adhesive including 1mm thick PVC lipping alround the cabinet and shelves or as per manufacturing specifications complete including taking down old cabinet all as per directions of Engr-in-Charge. Note : The measurement of kitchen cabinet will be finished area in elevation.
Providing and Fixing factory made PVC kitchen/cupboard frame of the size 75mmX40mm with a wall thickness of 4 mm made out of extruded 4 mm thick prelam PVC sheet manufactured by an ISO 9000 certified company, reinforced with 15 mm X 15 mm MS square tube of 19 gauge thickness throughout the frame and mitre cuta at two corner and jointed with 2 Nos of 150 mm long bracket of 10 mm X 10 mm MS square tube. the door frame shall be fixed to the wall using 65/100 long MS screw a minimum of 4 Nos of screw to be provided for each vertiacl member and minimum of two Nos of Screw to be provided for horizontal member etc all as per direction of Engr- in-charge.
M&L Rendering 15mm thick on fair faces of brick / concrete in CM 1:6 and finished even & smooth (without using extra cement).
M&L Preparation of new plastered or unplastered surfaces of walls and applying two coat of distemper oil emulision (O.B.D) white or tinted over and incl of one coat of primer on wall surface.
M&L Treating ends of posts, back of chowkhats etc area tarred exceeding 0.1 Sq.m but not exceeding 0.5 Sq.m each including preparation of surfaces of wood and wood based material, steel and iron work and treated with tar or coal tar black paint.
Demolition of brick work or stone/ boulder masonary built in cement mortar or cement lime mortar .
M&L Brick work with sub class" B " bricks straight or curved on plan to to any radius in half brick thick wall built in CM 1:4.
S& F in repairs mild steel lock plate & handles made of of Flat iron 35 X 5 mm incl welding and painting with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
S & F in repairs mild steel helical wire springs (confirming) as to IS-6248-1970) for shutters not exc 12 Sqm of approved make complete all as specified.
S & F in reapairs 3.15mm thick mild steel bracket plate hexagonal or circular in shape incl welding complete .
S & F in repairs MS Black pipe 40mm dia medium grade for rolling shutters shaft incl drilling holes for fixing springs and welding to MS brackets plate compelete all as directed by Engineer-in-charge (Note MS brackets plates shall be measured and paid for separately).
S & F for replacement of inter locking lath section formed from rolled MS strips 1.20mm thick for shutters above 3.5m width complete all as directed by Engineer-in-charge.
S & F in replacement of steel rolling shutters without ball bearing, as specified incl top cover anchoring rod hasp & staple and one shop coat of primer before erected in position as directed complete manual type thickness of lath 1.00mm.
Note :- The rates for these items deemed to be included for cleaning of complete house such as floor(includes application of pouncha with wet cloths), removing of all spots on door, window and wall and floor tile in kitchen and bath room after distempering/painting, cleaning of glass paes for door & windows including garges shutters & its shutter proper and over cover the furniture properly during OBD & painting of tarpoline cover paints in different room and lay out of all furniture items proplerly after completion of entire process complete all as specified and directed by Engineer In Charge.
M/S Sunil Steel Works
B S R Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .