Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.7 LAccepted-AOC OPP AIR FORCE STATION VPO SORANA DISTT SAHARANPUR UP PIN 247 232 | SAHARANPUR | UTTAR PRADESH | 247232 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹36.1 L+₹24,755.40 (0.69%)Rejected-Finance | L2 | Rejected-Finance Being 2nd Lowest | |
| 3 | L3₹40.1 L+₹4.3 L (12.0%)Rejected-Finance | L3 | Rejected-Finance Being 3rd lowest |
Tender Value
₹38.6 L
EMD Value
₹77,200
Closing Date
30 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MMD PRAVEEN NANDIKATTI GE AF SARSAWA
Garrison Engineer (AF) Sarsawa, Distt. Saharanpur (U.P)
ADDN/ALTN TO OMQS AND PROVN OF GREASE TRAP AT VARIOUS LOCATIONS AT AF STN SARSAWA UNDER GE (AF) SARSAWA
2023_MES_630718_1
8123/SAR-66/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (AF) SARSAWA
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE(AF) SARSAWA
₹77,200
Yes
15 Feb 2024
2 Dec 2023
6 Jan 2024
2 Dec 2023
30 Dec 2023
16 Dec 2023
2 Dec 2023 - 16 Dec 2023
Amount
Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified& directed by Engr-in-Charge.
Demolition of cement concrete (un-renforced) in ground floor and paving. exc. 15 cm thickness (below or above ground level.) & removal of rubbish material complete all as specified& directed by Engr-in-Charge.
Taking down chowkhats (without taking off shutters from the frames) chowkatts n exc 1.5 sqm each complete all as specified & directed by Engr-in-Charge.
Taking down chowkatts (without taking off shutters from the frames) chowkatts exc 1.5 sq. m but n exc 4 sq m each complete all as specified & directed by Engr-in-Charge.
Taking down shutter of any decription exc.1Sqm and n.Exc 2 Sqm complete all as specified & directed by Engr-in-Charge.
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish of the premises
Taking down cement plaster any description on brick or stone any description
Taking up or down 15mm steel tubing and connections, complete all as specified& directed by Engr-in-Charge.
Taking up or down 20mm steel tubing and connections, complete all as specified & directed by Engr-in-Charge.
Demolition/Removal of existing RCC water tank including cover (Capacity not exc. 1000 Ltr) placed on roof of the Bldgs/Quarters including removal of their staging/platform complete all as directed. Note : (i) Tank/staging shall be taken down after demolition in small pieces. (ii) Demolition shall be carried out carefully without damaging roof treatment. (iii) Roof treatment came out/damaged during demolition shall be made good with same specification without any extra cost. (iv) Small trees/Plantation near the tank shall be uprooted and roof treatment shall be made good.
S&F Sand cast,100 mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors and including dismentling old u/s pipes complete
S&F Sand cast,100 mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in wall and including dismentling old u/s pipes complete
S&F Sand cast,75 mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors and including dismentling old u/s pipes complete
S&F Sand cast,75 mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in wall and including dismentling old u/s pipes complete
S&F in repair CI Bends 100 mm dia (any radius),diminishing pieces or tapers (larger bore measured) complete all as specified
S&F in repair CI Bends 75 mm dia (any radius),diminishing pieces or tapers (larger bore measured) complete all as specified
S&F 100mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified
S&F 75mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified
S&F in repair for 150mm x150mm Salt-glazed stoneware gully traps, square or round mouthed, type 'P' including dismsntling old trap complete all as specified
M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified.
M & L brick work with old size sub-class ‘B’ bricks,(OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.
M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.
M&L Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified& directed by Engr-in-Charge.
S&F 35mm thick IInd class hard wood panelled door shutter with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete.
S&F 35 mm thick IInd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats all as specified & directed.
M&L 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides compete all as specified and directed by Engr-in-Charge.
M&L for preparing of new untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (of approved shade) over a coat of pink primer all as specified.
S&F stainless steel hinges 100mm long medium weight, complete all as specified & directed by Engr-in-Charge.
S&F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed by Engr-in-Charge.
S&F 150mm Aluminium handles, cast type, anodised complete all as specified & directed by Engr-in-Charge.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.
S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.
S&F anodized aluminium grill with power coating (minimum thickness 50 micron) of approved pattern and fixed to the existing window/ventilator frame with CP brass/stainless steel scrwed @ 200mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement & directed by Engr-in-Charge.
M&L for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate), 25mm thick, as in Sub base complete all as specified & directed by Engr-in-Charge.
M&L Vetrified Ceramic tiles 8 to 9mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and over 15mm thick cement screeding in CM 1:6 Complete all as specified and directed by Engr-in-Charge.
M&L Vetrified Ceramic tiles 8 to 9mm thick light shade (square/rectangular) polished, area of each tiles n exceeding 0.36, in vertical surfaces as skirting and dados etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and over 10mm thick rendering in CM 1:4 Complete all as specified and directed by Engr-in-Charge.
M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and over 15mm thick screed bed in CM 1:6 complete all as specified& directed by Engr-in-Charge.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and over 15mm thick screed bed in CM 1:6 complete all as specified& directed by Engr-in-Charge.
M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles and over 10 mm thick rendring in cm 1:4 complete all as specified & directed by Engr-in-Charge.
M&L Rendring 10mm thick on fair faces of brick work or concrete surfaces on wall in CM 1:6 complete all as specified and directed by Engr-in-Charge.
M&L Rendring 5mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for preparation of newly plastered surfaces & applying three coat of white wash on ceiling complete all as specified & directed by Engr-in-Charge.
M&L for preparation of new plastered surfaces of walls and applying one coats of Oil bound distemper over a coat of 1mm thick wall care putty of approved tint complete all as specified & directed by Engr-in-Charge.
Supply only 4.8mm thick Sheet glass, ordinary quality and glazing with rubber bedding in square n exc 0.5 sq.m in each pane complete all as specified & directed by Engr-in-Charge.
Supply only 5mm thick frosted glass with rubber bedding in square n exc 0.5 sq.m in each pane complete all as specified & directed by Engr-in-Charge.
S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor complete all as specified & directed by Engr-in-Charge.
S&F 20mm GI tubing Medium grade fix to wall/floor complete all as specified & directed by Engr-in-Charge.
S/F Stainless steel kitchen sink, single bowl handmade kitchen sink with multi-functional and silver 1mm thick (weight not less 6kg ) with plugs, washers and waste pipe including bedding in cement mortar or including and fixing cast iron cantilever brackets and connecting union to pipe bowl size 600x450x250 mm including flush pipe of polyethylene of low or high density or PVC 32mm bore with long screwed shanks and fly nuts complete all as specified & directed by Engr-in-Charge.
S&F Rotational moulded polyethylene water storage tanks of 1000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified & directed by Engr-in-Charge.
S&F ball valves brass high pressure with polythelene float and fly net complete, screwed , iron pipes 15 mm dia complete all as specified & directed by Engr-in-Charge
S&F in repair bib taps, chromium plated alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed by Engr-in-Charge.
S&F in repair angle valves, chromium plated alloy screwed down high presure, screwed both ends for iron pipe or for unions of 15 mm dia long sunk concealed type complete all as specified & directed by Engr-in-Charge.
S/F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x 440mm white with integral foot rests connection to trap and to flushing pipe, etc.complete including making food to floor complete all as specified & directed by Engr-in-Charge.
S&F PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity low level, white, with intel, ball valve, float and handle including brackets complete all as specified & directed by Engr-in-Charge.
S&F brass chromium plated shower rose 125mm size with swivel joint type including fixing to steel pipe of 15mm bore or union complete all as specified.
Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan (Padestal pattern), white (ISI marked), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonoage pipe etc & with plastic WC seat cover (white) closed pattern with flat bottom and cover and suitable mild steel chromium plated or aluminised hinging device complete all as specified.
S&F brass chromium plated WHB mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore all as specified and as directed.
S&F PVC connection of 15mm bore with 2 Nos. PTMT nuts, 60cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed by Engineer-in-charge.
S&F mild steel work such as angle iron in rails, braces ,stairs (framed) including stringers, treades, landing, balusters, hand rails, posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets (for securing wire mesh etc) including necessary welding where required as per site requirement and other similar works complete, conforming to Gde E-165 (Fe 290) all as specified & directed.
Supply and fixing MS grating CP 100mm dia, and including floor trap with hole/without for waste pipe of approved make including fixing with CM to floor/nahani traps and including dismentling old u/s grating/traps complete
S&F in repairs vitreous china wash basin white of size 630x450mm (ISI marked) flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete fixed in repairs all as specified and directed.
S&F wall mixer chromium plated (2 in -1) with arrangement for overhead shower with 220 mm max long bend pipe including 125mm x125mm over head shower complete all as specified & directed.
S&F sink mixer chromium plated,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed.
S&F 18/19mm thick High Density High Moisture Resistant board (HDHMR) Prelaminated both sides as in Controller's Desk ,palmed boxes, showcase, shutters of Cup Boards, drawer fixed with MS heavy duty telescopic slide hannel of any size etc including 6mm designing teak wood beading on edges complete all as specified and as directed.
S&F 150mm oval shape extruded brass handles, fabricated type polished fixed to drawer/cabinet/door/wardrobe pull handle etc complete all as specified & directed.
S & F stainless steel pie corner hinge 135 degree and size 150x150x100mm complete all as specified & directed by Engr-in-Charge.
S&F FAST DM01SS Stainless Steel Furniture Door Catcher Magnet Size No. 2 for for Wadrobe, Cupboard and Almirah Door. (SS MAT) with Mounting Screw complete all as specified
M&L stainless steel (Grade 304) kichen cabinet storage basket & drawers for food items & kitchen utensils of any size and shape, corrosion resistance, seamless glossy finish, high quility, pullout basket with telescopic drawer channel of any size etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size,complete all as specified & directed.
S&F in repairs glass corner shelf complete all as specified & as directed.
S&F in repairs glass shelf rectangular type complete all as specified & as directed.
S&F in repair 2-in-1 CP bib cock complete all as specified and directed by Engr-in-Charge.
S&F in repair 2 way CP angle cock complete all as specified and directed by Engr-in-Charge.
S&F in repair Brass chromium plated towel rack 24 " long, fixed in position with steel screws complete all as specified.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, 1400 RPM, blades, and frame and louver complete with making arrangement for fixing of exhaust fan on steel/Aluminium frame window/ making opening in brick wall as per site requirement and also making good to disturbed surfaces as per matching to existing complete all as specified and as directed by Engr-in-Charge.
Supply & fix wall mounting fans 230 volts single phase oscillating 400 mm sweep suitable for wall mounting complete all as specified and as directed by Engr-in-Charge
Supply and fix electric water heater, storage type outer body made out of ABS & PP, heating element of 2 KW storage capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, SS connection piece etc complete all as specified and as directed by Engr-in-Charge.
M & L for concealed point wiring complete with PVC insulated and unsheathed FRLS cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit ISI marked medium grade not less than 20 mm dia, with MS stove enamelled sunken boxes (normal and modular type as required) including earth dolly with plastic laminated sheet top cover (cover plate with frame in case of modular) of approved make and colour including 1.5 sqmm multi stranded FRLS copper conductor cable of green colour as continuous earth wire with lugs and accesseries and making good disturbed surfaces of walls/floor etc complete all as specified and directed for the followings :-One light / fan point controlled by one way switch
All as per above item No-78 here in before but One 5 Amp socket outlet on independent board.
All as per above item No-78 here in before but One 5 Amp socket outlet on same board.
All as per above item No-78 here in before but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, FRLS cable for 15 Amp socket outlet on independent board including 2.5 sqmm multi stranded copper conductor cable of green colour as continuous earth wire with lugs etc as required complete all as specified and as directed.
S & F of circuit wiring with PVC insulated, FRLS, unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 1.5 sqmm (Nominal area) drawn in and including PVC conduit of suitable size as directed with and including one run of 1.5 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green colour as continuous earth wire including lugs etc connected and tested complete all as specified and as directed. Note: (i) Two runs of 1.5 sqmm cable and one run of 1.5 sqmm cable of earth continuity conductor and conduit shall be a unit length.
S & F in of sub main wiring with PVC insulated, FRLS unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 4.0 sqmm (Nominal area) drawn in and including concealed PVC conduit of suitable size as directed with and including one run of 4.0 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green colour as continuous earth wire including lugs etc connected and tested complete all as specified and as directed. Note: (i) Two runs of 4.0 sqmm cable and one run of 4.0 sqmm cable of earth continuity conductor and conduit shall be a unit length.
S&F of ceiling rose surface bakelite 63 x50mm three terminals complete all as specified and as directed.
S&F socket outlet 6A/16A-2/3 pin combined 2 module modular type complete all as specified and directed.
S&F switch 6 amps modular type one one way complete all as directed.
S&F switch 16 amps modular type one one way complete all as directed.
S&F socket outlet 6A-2/3 pin combined 2 module modular type complete all as specified and directed.
S&F MCB SP 5 to 40 Amps, 240 volts curve 'B',breaking capacity 10KA, all as specified.
Taking down carefully copper / aluminium point wiring light / fan, socket or power point complete including fittings such as switches, sockets, ceiling rose, bell push bell buzzer lamp holder bracket etc. removing from site and making good disturbed surface of wall, floor etc complete all as specified and as directed.
Supply installation and commissioning and user training of German Technology based Grease separator made of polyethlene as per DIN EN 1825, proven stability of 50 years, for below ground installation, overall dia of 1320mm, with ventilation provision, emptying via suction line 65PN 10, counter flange with fire hose quick coupling 75B and 2 1/2" blank cap and satisfy reaction to fire class A. Standard odour tight top cover of 600mm dia, clear opening, frame made of concrete material and cover made of cast iron with raising tube, load class A15 according to EN 124. Inlet and outlet Dia : DN 100 Make : ACO, Model : Lipumax PD Nominal Size NS4 Grease storage : 270, Sluge storage: 460L, Overall capacity: 930L Note : GST 18% including
Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed.
Excavating over areas, n exc 1.5 m deep and getting out soft/loose soil all as specified.
Excavating over areas, exc 1.5 m deep but n exc 3m deep and getting out hard/dense soil all as specified.
M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation complete all as specified and directed by Engr-in-Charge.
M&L for 150mm dia Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all as specified and directed.
Returning filling in including spreading, levelling watering and well ramming in layers not exc. 25 cm using excavated soil all as specified and directed.
Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed.
S&F 150mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors including dismantling old u/s pipe complete all as specified
M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate for 150 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete.
M&L for brick work with subclass 'B' Bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 all as specified and directed.
M&L for PCC in surface channel and drains type C2 (1:3:6) using 40mm graded stone aggregate all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, mixed with water proofing admixture (ISI marked), finished even & smooth without using extra cement complete all as specified. Note : - Supply only water proofing admixture shall be measured and paid for separately.
Supply only integral liquid water proofing compound (ISI marked). Make : Pidilite (Dr. Fixit Pidiproof LW) or equivalent of Fosroc / Sika / STP
M& for providing precast cement concrete type B1 (1:2:4) 20mm graded aggregate, set in CM 1:6 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc all as specified and directed. (Note : Reinforcement shall be measured & paid separately).
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
DHIMAN ENGINEERS & BUILDERS
M/s Inderlal
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .