43/EDC(H)/2024-25

Amount

Safe carriage, loading-unloading with proper stacking of following material from store centre to pit site/JE dump store.

PCC pole 8.5 mtr long

ST pole 11 mtr. Long

11 KV XLPE cable of size 3x185/3x120/3x70 sq mm

G1 Wire

11 KV VCB out door panel 400/100 O/G

11 KV Indoor Metering cubicle

Stay Set Complete

11 KV Pin insulator with GI pin

11 KV Disk Insulator with Fitting

11/0.4 KV T/F 63/100 KVA

11/0.4 KV T/F 25/16/10 KVA

11 KV outdoor, pole mounted CT/PT unit.

ACSR Weasel Conductor

ABC Cable(3x50+1x35+1x16) sq mm.

ABC Cable(3x95+1x70+1x25) sq mm.

ABC Cable(1x25+1x16) sq mm.

Erection of Single PCC 8.5 mtr long Pole with Following necessary accessories.

Grouting of Pole in deep 1/6 the length of Pole in ratio 1:4:8in cement sand & bla ST.

Muffing Plinth 300mmx45 mm above ground level in 1:2:4 in cement coarse sand & stone grit.

Erection of STP 11 mtr long Single pole with following accessories (Only Pole and Insulator Supplied by department).

Grouting of Pole in deep 1/6 the length of Pole in ratio 1:4:8in cement sand & bla ST.

Muffing Plinth 300mmx45 mm above ground level in 1:2:4 in cement coarse sand & stone grit.

Erection of PCC 8.5 mtr long double pole with following accessories (Only Pole and Insulator Supplied by department)

Grouting of Pole in deep 1/6 the length of Pole in ratio 1:4:8in cement sand & bla ST

Concreting of Pole Plinth 300mmx45 mm above ground level in 1:2:4 in cement coarse sand & stone grit.

Erection of STP 11 mtr long double pole with following accessories (Only Pole and Insulator Supplied by department).

Grouting of Pole in deep 1/6 the length of Pole in ratio 1:4:8in cement sand & bla ST

Muffing Plinth 300mmx45 mm above ground level in 1:2:4 in cement coarse sand & stone grit.

INSTALLATION OF Panel Installation of 11KV Outgoing Panel complete work including commissioning

Fabrication & Erection of cable stand made of two nos MS Channel 100x50x3 mtr. Long jointed to each other by means of 5nos MS Strip 50x6mm of size 150mm long each by welding at equal distance interval as per norms and grouting in block of 300x300x700 completely providing two nos cable clamps also all the materials i e. clamps nut bolts will provide by contractor

Grouting and Nuzzling of 11 KV stay set complete including fixing of necessary clamps. Accessories 15 required including its grouting by civil material (sand, brick blast & cement). All material except stay wire shall be supplied by the contractor

Ordinary Earthing by 11 KV MS earth Rod 2500mm Hong as per RESPO schedule. All material except Earthing rod shall be supplied by the contractor

Cable hosting of 11 KV XLPE Cable on double Pole (3x70, 3x120x3x185 x sq mm ) Including jump ring etc complete with help of GI Pipe as per RESPO Norms.

Laying of 11KV 3x185/3x120/3x70 sq mm XLPE single cable by digging of trench of size 500 mm wide 900 mm after laying of cable boxing with brick, local sand and stone slab,

Installation of 11 KV CT/PT double metering unit of constructed double pole structure as per RESPO norms. Only 11 KV CT/PT unit shall be supplied by department

Fixing & commissioning of 11 KV pilfer Resistance meter (25/5Amp.) All material except pilfer Resistance metering cubical shall be supplied by the contractor.

Fabrication erection & commissioning of 63/100 KVA T/F on Double pole with all accessories. All material except 63 KVA T/F shall be supplied by the contractor

Fabrication erection and commissioning of 25/16/10 KVA T/F on double/single pole with all accessories. All material except 25/16/10 KVA T/F shall be supplied by the contractor.

Chemical Earthing of T/F 100/250/400 Complete Work

Stringing & Sagging ABC Cable (3x50+1x35+1x16) sq mm. winding & jump ring of LT Line With AB Conductor as per RESSPO norms AB Conductor Provided by Dpt and balance materials linke holding clamp eye hook suspension clamp &dead end clamp arranged by the conductor

Stringing & Sagging ABC Cable (3x95+1x70+1x25) sq mm. winding & jumpiring of LT Line With AB Conductor as per RESSPO norms AB Conductor Provided by Dpt and balance materials lin ke holding clamp eye hook suspension clamp &dead end clamp arranged by the conductor

Stringing & Sagging ABC Cable (1x25+1x16) sq mm. winding & jump ring of LT Line With AB Conductor as per RESSPO norms AB Conductor Provided by Dpt and balance materials linke holding clamp eye hook suspension clamp & dead end clamp arranged by the conductor

Supply & Fixing Of 11 KV Fuse Set (All Material Supply by The Contractor)

Stringing & Sagging of three phase 11 kv line on ACSR Weasel/ Rabbit conductor as per RESPO Norms

Looping & chopping of tree branches for clearance of 29 HT/LT line after clearance of line through out pieces of tree branches of site (Approx 3 Km).

M/S S.K. CONTRACTOR AND SUPPLIER

M/S RUDRA CONTRACTOR AND SUPPLIER BAREPUR ANDHARRA HARDOI