SPECIAL REPAIR TO BLDG NO KND-56 OF 22 JAK RIF AT JUTOGH CANTT (C COY) UNDER GE (I) JUTOGH

Amount

Taking down cement plaster on brick or stone walls incl raking out joints hacking for key & scrubbing down with water etc compplete all as specified and directed.

M&L for 10mm thick Cement plaster (1:6) on other than fair faces of brick work or concrete Surafce finished even & smooth w/o using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint and one coat of wall care putty on wall surfaces including preparation of surfaces, compplete all as specified and directed.

Complete removal of existing treatment on wall (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped with wall care putty (3mm thick) and preparation of surfaces for further treatment and applying two coats of oil bound distemper (white/Approved shade) complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), using water proofing compound compplete all as specified and directed. Note:WPC will be measured and paid for separately.

Supply only liquid water proofing compound ISI Marked complete all as specified and directed.

M&L for 5mm thick cement plastering in CM 1:3 on fair faces of cocnrete ceiling surfaces finished even & smooth wihtout using extra cement, complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of ceiling including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots including necessary putty work on holes/cracks and applying one coat of oil bound distemper compplete all as specified and directed.

M&L for complete removal of existing treatment(incl weed growth sorroundind sewage pipe and water tank portion) of plastered or unplastered old decorated surface walls by brooming down and applying two coat of weather proof anti fungal exterier emulsion paint on external surfaces including two coat(2-3mm) exterior wall care putty(true care wall putty) for a smooth wall finish at any height of building / tower incl necessary scofolding and T&P compplete all as specified and directed.

Demolition of brick work including all quoins arches pillars etc built in cement mortar, compplete all as specified and directed.

M&L for half brick work with sub class 'B' brick in cement mortar 1:4, straight or curved on plan exc 6 m mean radius, compplete all as specified and directed.

M&L for Walling of random rubble,uncoursed well bonded, built in CM (1:6) as in parapet, steps compplete all as specified and directed.

M&L for brick work in cement mortar (1:6) using sub class 'B' bricks staight or curved on plan exc 6.0 m mean raidus, compplete all as specified and directed.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

Use and waste of form work to chajjas and similar work for fair finish surfaces compplete all as specified and directed.

M&L for RCC 1:1.5:3, type B-1, using 20mm graded crushed stone aggregate as in chajjas etc complete all as specified and directed.

M&L for mild steel 10 mm dia and over TMT bar cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the premises complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4, Type B-0, using 12.5mm graded crushed stone aggregate as in floor finished rough to recieve floor finishes etc complete all as specified and directed.

M&L for non skid coloured ceramic tiles 400 x 400 x 7 to 8 mm set & jointed with neat cement slurry & pointed in white/coloured cement to match the tiles over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic high glossy coloured tiles 300x200x7/ 450x350x7/300x600x7 to 8 mm thick on vertical surface such as skirting , dado etc. over 10 mm thick backing coat plaster in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles/ joint free exterior stone kraft in vertical surfaces(Brick/stone surface) of size 350x250x7mm/ 450x300-350x7/300x600x8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick backing coat in cement mortar 1:4 complete.

M&L for vitrified ceramic tiles 10 mm thick of light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:6 complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick of light shade (square/rectangular) as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick rendering with cement mortar 1:4, complete all as specified and directed.

Demolition of stone slabs and tiles (chequered tiles) of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with gray cement slurry mixed eith pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for screed bed or beding layer of morter 20mm thick in cement morter 1:4 for laying floor finishes to receiving the kota stone complete all as specified and directed.

M&L for coloured chequred cement conc tiles (30cmx30cmx25mm thick) in grey cement and with pigment in floors etc , set and jointed in neat cement slurry, over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for granite (of any type) 20 mm thick one side machine polished in steps(including nosing and treading), jambs, pillars, window Cills, and top of kitchen platform and top of counter top wash basin etc set and jointed in neat cement slurry and pointed with coloured cement to match including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) including laid over 12 mm thick in cement mortar (1:3) and ointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

Rounding to edges of stone (of any description) slabs one edge, such as in steps, cooking platform, and other similar situations including rubbing and polishing (mirror finish), complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection finished even & smooth complete without using extra cement complete all as specified and directed.

M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in surface channel/ drains incl fair finises & necessary formwork complete all as specified and directed.

M&L for 50mm thick plain cement concrete 1:3:6, type C-1, using 20mm graded crushed stone aggregate as in plinth protection finished fair and even without using extra cement complete all as specified and directed. Note:- The plinth protection shall be laid in pannels and length of the each panel shall not be more than 2.00 mtr all as directed. 6mm joints filled with 85/25 grade bitumen and sand (1:3 ratio) shall be provided. No deduction for joints shall be made while making payment against the above item.

Taking down chowkaths or frames n.exc 1.5 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc. complete all as specified and directed.

Taking down chowkaths or frames exc, 1.5 sqm but n.exc 4 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc. complete all as specified and directed.

S&F pressed steel frames of size 125x60 mm for doors with one or more rebates including supply & fixing lugs, 125 mm size hinges, lock strike plate, etc., complete all as specified and directed.

S&F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including supply & fixing lugs,125 mm size MS hinges, lock strike plate, etc., complete all as specified and directed.

S&F band, straps, supports or stays for rain water, ventilating pipes including bolts, if required: hooks (stay) , heavy, for large gates: hook and pintle hinges large hasps and staples, chain hand made sliding bolts clamps hold fasts wall ties: hooks for hanging fans plain angle cleats for securing purlins to wood trusses or rafters: knee piece inserts; two ways and three way sstraps, plate wshers and similar small articles conforming to fe-290 gde E-165 complete all as specified and directed.

M&L for PCC 1:3:6, type C-1, using 20 mm graded crushed stone aggregate as in filling pressed steel frame/ hold fast blocks etc complete all as specified and directed.

S&F 35mm thick Flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on both sides with 2nd class hardwood lipping/ frame complete all as specified and directed.

S&F 35 mm thick factory made glazed & Skelton shutter of IInd class HardWood open rebated & prepared to receive glass or gauze etc without sash bar open rebated with edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass or guage etc size of stiles rails etc as specified in sec 8 clause 8.24 (a) of SSR Part-I (2009), complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: i)M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. ii) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall beacceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. Note: stainless steel butt hinges and necessary S S screws shall be paid separately as per specification.

S&F Aluminium anodised powder coated (powder coating color/ shade as approved by GE) sliding type three track window/ ventilator with shutter and frame including aluminium grill and mosquito proofing net and 5 mm thick tinted glass , size of frame 98.50 x 31.75 x 1.3mm thick for top and sides, 98.50 x 31.75 x 1.2mm thick, bottum and shutter frame 38 x 18 x 1.5mm thick, Aluminium grill 6 mm dia design No. DG-102 make DEDO grill or design No. A-103 make aluminium grill fixed to 50 x 20 x 1.5mm thick including necessary handles, tower bolts etc. complete all as specified and directed.

S&F anodised powder coated (powder coating color/shade as approved by GE) aluminium frame/shutters for doors, windows, ventilators of powder coating minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing and cleat s for receiving glass/wire mesh etc. complete all as specified and directed.

S&F Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of apertures 1.18 mm fitted with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F in repair Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of apertures 1.18 mm fitted with tinned tacks or galvanised wire staples complete all as specified and directed.

Hacking Out Old Broken Glass (any thickness, size, quality or description) from Wooden Frames, Glazed with Putty or fixed with Beads, of any height including necessary scaffolding and T&P required to complete the work complete all as specified and directed.

S&F sheet glass ordinary quality 4 mm thick glazing in square/ rectangle n.exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel and wooden of any height including necessary scaffolding and T&P required to complete the work complete all as specified and directed.

S&F figured glass ordinary quality 4 mm thick glazing in square/ rectangle n.exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel and wooden of any height including necessary scaffolding and T&P required to complete the work complete all as specified and directed.

S&F Butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed.

S&F Aluminium tower bolt of extruded section, 200mm length of bolt and fixed with screws, complete all as specified and directed.

S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and directed.

S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and directed.

S&F 300 mm MS ordinary rat tail rod pattern springs incl roller and roller plate fixed to wooden chowkhats or welded to angle iron door frames complete all as specified and directed .

S&F floor door stopper Aluminium body and tongue, anodised overall length of cover plate of size 75 mm long with hard drawn steel spring complete all as specified and directed .

M&L for preparation of new wooden surface of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enammel paint over one coat of pink primer complete all as specified and directed.

M&L for painting to steel surfaces of any description not other wise described over 10cm width or girth with two coats of synthetic enamel paint incl preparation of new surfaces complete all as specified and directed.

M&L for preparing old painted surfaces of wood and wood-based materials of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of white / approved shade complete all as specified and directed.

M&L for preparing old surface of steel & iron surfaces of any description over 10 cm in width or girth , and applying one coat of white/ approved colour/ shade synthetic enamel paint complete all as specified and directed.

S&F in repair stainless steel tube of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets and finials fency type, stops fixed with ss screws etc complete all as specified and directed.

Dismantling wooden boarding any description, fixed in any position with nails as in shelves of cup board and pelmets of any description, complete all as specified and directed.

S&F 18/19 thick block board ,grade 2 quality interior grade, decorative type veneer on both faces decorative lamination and other side balancing white lamination as in cup board shelves including 6 mm thick teak wood leaping on three sides and 20mm thick on hanging side & french polishing to edging, complete all as specified and directed.

M&L for decorative laminate 0.9 mm type 1 of surface finish with glossy finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and as directed.

S&F D-type cabinet handles premium quality, stainless steel 304/ gloss chrome/SN finished 150mm long matt finished complete fixed in position complete all as specified and directed.

Taking up or down steel tubing and connections of 15mm bore in pipe, including cleaning for re-fixing or removal from site, complete all as specified and directed.

Taking up or down steel tubing and connections of 20mm bore in pipe, including cleaning for re-fixing or removal from site, complete all as specified and directed.

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth, complete all as specified and directed.

S&F 15mm dia GI tubing medium grade incl fittings, cutting threading and fixing to walls or fixing in concealed walls or in floors etc, and making good the surfaces matching to exsiting surafaces of walls/ floor complete all as specified and directed.

Re-fixing old steel tubing 15 mm dia and connections in new or old positions, complete all as specified and directed.

S&F 20mm dia GI tubing medium grade incl fittings, cutting threading and fixing to walls or fixing in concealed walls or in floors etc, and making good the surfaces matching to exsiting surafaces of walls/ floor complete all as specified and directed.

Re-fixing old steel tubing 20 mm dia and connections in new or old positions, complete all as specified and directed.

S&F in repairs, Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), P or S trap, complete all as specified and directed.

S&F in repair PVC water closet seat cover , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe, complete all as specified and directed.

S&F PTMT jet spray with 1.00 metre PVC tube, (suitable for European seat), complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back of size 550 x 440mm including CI brackets , chromium plated waste coupling 32mm waste pipe etc., (incl all waste fittings), complete all as specified and directed.

S&F Brass CP WHB Mixer valve for mixing hot and cold water screwed down for 15mm dia iron pipe, complete all as specified and directed.

S&F Brass CP kitchen sink Mixer valve for mixing hot and cold water screwed down for 15mm dia iron pipe, complete all as specified and directed.

S&F Brass CP wall Mixer valve for mixing hot and cold water screwed down for 15mm dia iron pipe, complete all as specified and directed.

S&F in repair fancy type shower rose 125mm dia size of Rim and 30cm long CP brass pipe with swivel joint in complete all as specified and directed.

S&F in repair 15 mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles scrwed down suitable for 15mm bore pipe or union complete all as specified and directed.

S&F in repairs PTMT grating openable 100mm sqmm size with/without hole including fixing with white cement complete all as specified and directed.

S&F in repair of 15mm bore, stop valve, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S & F in repair stainless steel plate rack (utencil rack for kitchen of size 750 x 600 x 250mm and min 0.80 to 1.00 mm thick fixed with stainless steel screw and rawl plug complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5 mm th sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long, complete all as specified and directed.

S&F in repair Soap dish any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S&F in repair chromium plated, towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe incl bedding in cement mortor to dwarf wall ot cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x 330x160mm incl all fittings ie CP waste coupling, waste pipe complete all as specified and directed.

Taking down of Eaves gutter/rain water pipe( AC/ PVC/CI, rain water pipe/ SWG pipe line of any size or pattern), incl all fittings, complete all as specified and directed.

S&F 10mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F 75mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T 110mm), equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T 75mm), equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) bends, for 110mm bore pipes, with access doors, all as specified.

S&F PVC (SWR) bends, for 75mm bore pipes, with access doors, complete all as specified and directed.

M&L for salt-glazed stone ware gully traps, 150x 150 square or round mouthed, type "p" setting and jointing to drains with CM 1:1 complete all as specified and directed.

Dismantling of water tanks exc 500 ltrs capacity but not exc 1000 ltr capicity and removal at site complete all as specified and directed.

S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) double layered hoisted and fixed in position, complete all as specified and directed.

Refixing of Rotational moulded polythelene water storage tanks of 1000 ltr and above capacity (cylindrical vertical with closed top) three layer hoisted and fixed in position, complete all as specified and directed.

S&F Ball valve of brass, 20mm bore, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S&F CI Gate valve, 20mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union complete all as specified and directed.

S&F CI Gate valve, 15mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socket,in any length with rubber ring joint, laid in trenches or in floor, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socket,in any length with rubber ring joint, laid in trenches or in floor, complete all as specified and directed.

S&F PVC bend (any radius) of 110 mm bore, complete all as specified and directed.

S&F PVC bend (any radius) of 75 mm bore, complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm dia, complete all as specified and directed.

M&L for RCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in cover slabs placed in position over manholes etc., including use and waste of necessary formwork, complete all as specified and directed. Note :- Reinforcement and handles shall be measured and paid seperately.

M&L for TMT bars 6 to 8mm dia and over cut to length bent to shape required and binding with ms wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, using 20mm graded mechanically crushed stone aggregates as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for screed bed 15mm thick in cement mortar 1:4 on concrete surfaces finished even and fair without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions on existing surfaces, complete all as specified and directed.

Supply only Integral water proofing compound, complete all as specified and directed.

Demolition of cement concrete of any description and in any position, complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment set over sand cushioning as required complete all as specified and directed.

M&L for PCC 1:5:10, type E-2, using 40mm graded crushed stone aggrete as in foundation, filling and mass-concrete as in sunken floor etc., complete all as specified and directed.

M&L for rendering/ screed bed 20mm thick in CM 1:3 in (sunken slab) with water proofing compound as per manufacturer instruction's surface shall be finished even and smooth without extra cement, complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L preparation of plaster surfaces /RCC roof surfaces and applying one coat of bituminous primer @0.30 Ltr/sqm, complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including cleaning surfaces etc complete as in sunken portion, complete all as specified and directed.

M&L for PCC 1:2:4, type B-0, using 12.5mm graded crushed stone aggregate for benching, coping shall be 150mm in radius mixed with acrylic based polymner water proofing compound, complete all as specified and directed. Note: WPC shall be measured and paid separately.

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.

S&F framed work as in steel gate in( ornamentel and intricate design)such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes;framed guard bars barred iron doors ladders framed balusters walk ways railings frame work of water tanks and similar work conforming to Fe 290.Gde -E-165 including all fittings and fixtures etc., complete all as specified and directed.

S&F Fe-410-W(Gde-E-250), quality-B, for roof trusses (framed), trussed, purlins, rafter, sun shades,rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any guage thickness incl Nainital pattern as in roof covering complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ceiling/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges, flashing,faciya(approved design), eaves board valley gutter of any shape/any dia etc, cut to designed shape (Jhhallar) as directed at site fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm as directed by Engr-in-Charge at site with suitable arangement as required incl any height and with scoffolding and safty T&P complete all as specified & directed.

Dismantling wall, ceiling and floor boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, GI grid/ wooden frame work, complete all as specified and directed.

M&L for Providing and fixing gypsum board tiles PVC laminated (0.7 mm textured rigid poly vinyl film) of size 600 X 600mm, 9-12 mm thick in ceiling fixed with screw a timber/ GI/ Aluminium frame work with screws in ceiling flat or sloping, complete all as specified and directed.

M&L for GI frame powder coated work of size 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, complete all as specified and directed.

Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m and n.exc 2 sqm and refixing the same including easing resecuring complete all as specified and directed.

S&F Vitreous China urinals, bowl type (back or corner wall type), complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe, complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan socket or power) complete incl. (fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc.), removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc, complete all as specified and directed. Note : Old Meter to be deposited at AGE EM store Yard.

M&L for point wiring 1.5 Sqmm (nominal cross sectional area) with colour coding multistranded copper conductor cable, PVC insulated (FRLS-H) and unsheathed cable and including drawn through PVC conduit 20mm concealed wiring with all fittings and accessories, terminated tosunken box and laminated sheet of suitable size for housing/mounting the switches/sockets including 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable earth wire connected to common earth dolly for one light point control by one, one way switch complete all as specified and directed.

All as per Srl item No 138.00 above but two way swithces, complete all as specified and directed.

All as per Srl item No 138.00 above but one 3 pin socket oulet 5 amps, on independent board, complete all as specified and directed.

All as per Srl item No 138.00 above but one 3 pin socket oulet 5 amps, on same board with other switches, complete all as specified and directed.

All as per Srl item No 138.00 above but for one 3 pin 15 Amps power point on independent board with 2.5 Sqmm size FRLS-H PVC insulated unsheathed multistranded copper conductor cable and with 2.5 Sqmm FRLS-H PVC insulated unsheathed multistranded copper conductor as earth wire, complete all as specified and directed

S&F switch piano flush type single pole, one way 5 Amp ( ISI marked) complete all as specified and directed.

S&F switch piano flush type single pole, two way 5 Amp ( ISI marked) complete all as specified and directed.

S&F switch piano flush type single pole, one way 15 Amp ( ISI marked) complete all as specified and directed.

S&F socket (ISI Marked) 2 in 1, 3 pin 5/6 amps flush type complete all as specified and directed.

S&F socket 2 in 1, 5 pin 5/15amps (ISI marked) flush type universal, complete all as specified and directed.

S&F ceiling rose, 3 phase, PVC polycarbonate, insulated body (ISI Marked), complete all as specified and directed.

S&F LED tube light along with fixture, 1x 20 watt, (4 Feet) wall mounted LED battern, extrudedd PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffussed, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed.

M&L for lamp holder (Angle) PVC/ Polycarbonate type with back plate suitable for batten fittings incl 09 watt LED bulb, complete all as specified and directed.

S&F 10 watt LED bulkhead ceiling light cool day light fixed on wall suitable bracket with all connected accessories complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed.

S&F LED tube light along with fixture, 1x 10 watt, (2 Feet) wall mounted LED battern, extrudedd PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffussed, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed.

S&F sheet metal enclosure MCB DB 4 way TPN double door suitable for 240 V, 200 amps rated bus bar/ DIN rail, fixed and flushed on walls including cutting Knitch and making good disturbed surfaces complete all as specified and directed.

S&F 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 25 KA connected through cable lugs of suitable size complete all as specified and directed.

S&F sheet metal enclosure MCB DB 12 way SPN double door suitable for 240 V, 200 amps rated bus bar/ DIN rail, fixed and flushed on walls including cutting Knitch and making good disturbed surfaces complete all as specified and directed.

S&F MCB, SP (single pole ) 05 to 32 Amps, 10 kA, B curve for inductive load connected through cable lugs of suitable size complete all as specified and directed.

S&F MCB, SPN (single pole and neutral ) 40 Amps for inductive load connected through cable lugs of suitable size complete all as specified and directed.

S&F MCB, SPN (single pole and neutral ) 32 Amps for inductive load connected through cable lugs of suitable size complete all as specified and directed.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 100 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc and fixing arrangements complete all as specified and directed. Note : Old Geyser 100 Ltr to be deposited to AGE EM store.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc and fixing arrangements complete all as specified and directed. Note : Old Geyser 50 Ltr to be deposited to AGE EM store.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including fixing all arangements complete all as specified and directed. Note : Old Exhaust fan to be deposited to AGE EM store.

M&L for submain wiring with 2X6.0Sqmm+1X6.0Sqmm Earth Wire single core PVC insulated FRLS-H PVC sheathed cooper cable connecting to common earth dolly in and including heavy duty PConcealed Conduit as per site requirement and direction by EIC, with all accessories complete all as specified and directed. Note: Three runs of copper wire for phase , neutral, earth & one run PVC conduit/ casing shall be measured one unit length.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core, complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out (including road cutting), complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L for dry and clean fine sand for cable cushioning for cable protection complete all as specified and directed. Note : Punned down thickness shall be measured.

Supply and laying well burnt old size sub class 'B' bricks laid in trenches for cable protection, complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60×60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion including galvanised strip protected by 32 mm bore light grade galvanised iron pipe and earth and connected to test point as directed including funnel, watering pipe 20 mm bore light grade galvanised iron wire mesh charcoal and common salt in alternate layers of 15 cm compacted thickness all arround the GI electrode with concrete pit in PCC 1:3:6, type C-1, including necessary excavation in soft/ loose soil and disposal of soil to a distance not exc 50 m and necessary testing complete connected to earthing test point complete all as specified and directed.

M/S Jaswant Kumar Aggarwal (BID ID -3130562)

NSK TRADER (BID ID -3131251)

M/S J.S.ENTERPRISES (BID ID -3138744)