PROVN OF CERTAIN SRW AND MINOR WORK AT AGE B/R-I, AGE B/R-II AND AGE E/M UNDER GE BABINA

Amount

Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.

Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site including cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.

S&F MS Pressed steel frames for doors with one or more redates including necessary fixing lugs hinges lock strike plate etc complete as specified abd size of frame 125x60mm complete.note : cost of filling of PCC (1:3:6) type C-0 in hollow portion of frame will be measured and paid seperatly.

M&L for PCC 1:3:6 type C0 (12.5mm stone agrregate) for filling in pressed steel frames and like complete all as specified and directed

S&F 30 mm thick Flush shutters ,soild core construction ,with paticle board core and plywood face panels , commercial type both face is covered with decorative face veneer with lipping /frame to match and complete all as specified and directed.

M&L preperation of new wooden surface and applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surface any description not otherwise described over 10 cm width or girth and complete all as specified and directed.

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator (adequate track)/Shutter without sash, aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately.

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters of aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing, powder coated aluminium handles 150mm size 2 Nos, 3 Nos powder coated aluminium hinges heavy duty and 02 Nos 150mm long powder coated aluminium tower bolts in each door shutter with powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board etc. shall be measure and paid for separately.

S & F for door closer hydraulically regulated, designation No. 3, universal type, aluminium die-cast body (ISI Marked), suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed

S & F of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair complete all as specified and directed

S&F galvanised wire cloth, 0.48mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised staples complete all as specified and directed

S&F for framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290,E-165 , complete all as specified and directed.

S&F solid PVC door frame of size 50mm×47 mm made out of 5 mm pre laminated colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications and drawings.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails M.S frame shall be covered with heat moulded pre lam colour PVC 'C' channel having a PVC shut strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail& bottom rail, panelling of pre lamanited colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of 200mm of extruded section complete all as specified and directed.

S&F Aluminium alloy anodised sliding door bolt of 250mm with haps, staple ( bolt type ) & fixing clips of sheet etc complete all as specified and directed.

S&F Extruded aluminium alloy handle of 125mm size fabricated type, anodised complete all as specified and directed.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors and paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.

Demolition of cement concrete of any description and in any position reinforced concrete (re-inforcement cut to facilitate demolition) including disposal of unserviceable of mateial complete all as specified and directed.

Excavation over area nexc 1.5 m deep and getting out in soft / loose soil complete all as specified and as directed.

Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado, pcc tiles at roof etc. laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for moorum/ red bajri filling in floors or pavings laid in layers n. exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L 75mm thick PCC (1:3:6) Type C2 using 40mm graded stone agg as in plinth protection/Path etc surface even and smooth without using extra cement complete all as specified and as diected by engineer in charge.

M&L 25 mm thick cement concrete (1:2:4) type B-0 (12.5 mm graded stone aggregate) as in floors/sub base of floor,finish rough to receive th\e floor finishes etc complete all as specified and directed.

M&L Granite slab 18 mm to 20 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) .the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing complete all as specified and directed.

M&L for vitrified ,coloured and printed tiles of 8 to 10 mm thick (Square / Rectangular ) polished area of each tiles not exceeding 0.36 Sqm as in flooring over and including 15 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for vitrified ,coloured and printed tiles of width as directed and 8 to 9 mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for digital glazed ceramic tiles, coloured tiles 300mm x 450mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed.

M&L for non skid ceramic Coloured tiles, 300mmx300mmx 6 mm to 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar( 1:6) complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:4) mixed with water proofing compound on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as "supply only "

M&L for 15 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered sufaces of walls & applying 2 coat of cement base paint complete all as specified and directed.

M & L two coat of oil bound distemper over a coat of Birla wall care putty on plastered surfaces on wall incl. preparation of surfaces etc complete all as specified and directed.

Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean including filling depessions of scapped surface with putty and pereparation of surface for further treatment and M&L for two coats of distemper oil emlusion white or tinted over a one coat of wall care putty on walls complete all as specified and dircted by Engr-in -Charge

M&L complete removal of existiong treatment (internal and external) on walls by scrapping with steel wire brushing, scraping down smoke soot/ plants roof from wall/chhajjas and applying two coat of cement based paint on walls including preparation of old plastered or un plastered surface comlete all as speified and directed.

Demolition of brickwork or stone/ boulders masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc. but not excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

Excavation in trenches nexc 1.5m wide and nexc 1.5m in depth as in foundation etc as in any type of soil complete all as specified and directed.

Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5m above the starting point with soil complete all as specified and directed.

M&L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

S & F Peg set of six S.S. fixed to wall with PVC plugs and screw complete all as specified and directed.

S & F in repair Curtain rail stainless steel decorative type 25 mm dia including fixing bracket and end knobs complete specified and diected by engineer in charge.

Surface excavation n.exc. 30 cm deep and av. 15 cm deep and getting out in any type of soil complete all as specified and directed.

M&L for PCC Type D2 (1:4:8) using 40mm graded stone agg as in foundation filling mass concrete, complete all as specified and directed.

Material and labour for machine made ,1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles , 60mm thick of grade M-35, of any shape or shap and designe as approved, with colour pigment , laid over sand cusion fixed as in floors/ paths/ pavings etc, complete all as specified and directed. Note : Sand Cusion shall be measured and paid in separate item

M&L for vitrified paver color tiles 40 cmx40cmx9 to 10 mm thick, moulded set jointed and pointed in neat cement slurry with grey cement and pigment, in floors, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed .

M&L for cement concrete ( 1:2:4) type B-1 (20mm graded agrregate) in lintels upto 1.5m clear span, cills, stes, seimic and other similar bands, plinth course, string course, lacing cours, arapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water througs and the like including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed.

M&L for prepartion of New/Old plastered surfaces of walls ,chajjas and applying two coats of weather proof water based emulsion paint (Acrylic paint exterior grade )complete all as specified and directed in by engineer in charge.

M&L for preparation surfaces for building Nos and applying one coat of synthetic enamel paint and writing letters or figures (Block, Roman, Italic or Indian) of n exc 10cm height, width of letter shall not be less than 15mm, including stops, commas, lines, brackets and making outer boarder with approved tint of synthetic enamel thick paint complete all as specified and as directed.

Demolition of wall and ceiling boards fibre pulp insulation etc or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and directed.

S&F False ceiling 4 mm thick HPSC pre-prime non asbestos fibre cement building board ( size 600mm x 600 mm/ 595 mm x595 mm ) decorative finish fixed with clips and screw including powder coated galvanised MS grid frame work false ceiling of ( Main Tee size 32mmx24mmx0.55mm cross tee 24mmx24mmx0.38mm Wall angle (26mmx24mmx0.38mm ) and with slot for fixing including suspended with 2mm dia. GI wire hangers fixed with steel dash through fasteners from purline of the roof complete all as specified and as directed.

Dismantling of AC (corrugated / semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and as directed.

S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm corrugated steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete all as directed by Engineer -in -charge.

S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm plain steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding (ridge) to wall fixed with self tapping screws complete all as specified and directed.

M&L Hand rails, half round or other stock section or core for wooden hand rail straight portion , drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing post including cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe 290 Gde E 165 with and including applying two coats of synthetic enamel paint over a coat of primer alround before fixing in position complete all as specified and directed

Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed.

S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe-290 ( Gde E-165) complete all as specified and directed

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

M&L two coat of synthetic enamel paint over coat of Red oxide primer over Old steel / wooden surfaces nexc 10 cm width or girth complete all as specified and directed.

Cutting of cracks to V section in existing wall surface, cleaning out, wetting, grouting with cement and sand slurry 1:3 etc complete all as specified and directed.

M&L for reinforced cement concrete nominal mix type B1 (1:2:4) ( using 20 mm graded stone aggregate ) as in slab supported on walls ,beams, coumnns in floor , roof , landing complete all as specified and directed.

M&L for reinforced cement concrete nominal mix type B1 (1:2:4) ( using 20 mm graded stone aggregate ) as in beams , cantilevers bressummers , lintel over 1.5 m span etc. complete all as specified and directed.

M&L for use and waste Formwork to sides & soffits of floor or roof beam rough finished surfaces of concrete complete all as specified and directed .

M&L use and waste formwork to soffits of suspended slabs such as roof slabs , floor slabs , landings and similar works , not exceeding 200 mm thick ( horizontal or sloping ) including slab edges for rough finished surfaces of concrete complete all as specified and directed

S&F mild steel bars 10 mm dia and over (TMT) cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S complete all as specified and directed.

S&F TMT bars 6 to 8 mm dia cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S complete all as specified and directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 15mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe complete all as specified and directed.

Supply and laying 20 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed by engineer in charge .

Supply and laying 25 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed by engineer in charge .

S&F in repairs 110mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and as directed by engineer in charge .

S&F 75 in repairs mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints,fixed in Wall/laid in floor complete all as specified and as directed by engineer in charge .

S&F 110mm dia PVC(SWR)pipes bends any radious with acces door complete all as specified and as directed by engineer in charge .

S&F 75 mm dia PVC(SWR)pipes bends any radious.with acces door complete all as specified and as directed by engineer in charge .

S&F 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door complete all as specified and as directed by engineer in charge .

S&F 110mm dia PVC(SWR) vent cowl complete all as specified and as directed by engineer in charge .

M & L 75 mm dia of out let PVC (SWR) floor trap plain with cp grating incl. jointing with solvent cement as in repair complete all as specified and as directed by engineer in charge .

M & L PVC (SWR) gully trap 125 /100 plain with grating incl. jointing with solvent cement as in repair complete all as specified and as directed by engineer in charge .

S&F for in repair PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed.

S&F for in repairs 15mm angle cock chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified . Neptune series of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE

S&F for 15mm ,bib tap Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed in repair and complete all as specified Neptune series of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE

S&F for in repairs15mm,pillar taps Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified . Make :Neptune series of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE

S&F for in repairs vitreous china urinals, Half stall type ,white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F for as in repair viterous china wash down water closet pan (pedestal pattern) white excluding fixing bolts,flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & on CP Jet complete all as specified and directed.

S&F in reapir plastic water closet seat covered white coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devise complete all as specified and directed.

S&F for in repairs Heatth Faucet with one meter PVC flexible body pipe of CP including fixing bracket, complete all as specified and directed.

S&F for in repairs of vitreous china wash basin, white, oval type, size 550 x 400mm Including waste coupling ,waste pipe and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. . Note : Pillar tap and PVC connection will be measured paid separetly.

Supply only 15mm dia PVC connection with PTMT nuts of length 450 mm complete all as specified and directed.

S&F for in repairs Looking mirror 5 mm to 6 mm thick with fixing brackets ,screws, pvc rawal plugs etc. complete all as specified and directed

S&f corner glass shelf 300mm ( with ABS Bracket ) complete all as specified and directed.

S&F in repair CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed.

S&F 1000 litre cap rotational moulded polythelene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part - I including S and F of 20mm dia Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm-210gms) complete all as specified and as directed.

S & F 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S & F in repair gun metal globe / gate value with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and directed.

S&F for sinks made out of stainless steel 0.90 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S & F in repair for plate rack made out of stainless steel of wire type / sheet pattern size nad type as directed by Engineer In Charge and approved by GE fixed to wall with necessary fitting arrangement Complete all as specified and directed.

Supplying, fixing, jointing and testing galvanised iron tubing 15mm dia medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed.

Supplying, fixing, jointing and testing galvanised iron tubing 20mm dia medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed.

S&F 15 mm bore angle stop cock(angle cock) fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and as directed.

S&F 15 mm bore bib taps long body chromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm bore etc complete all as specified and as directed.

S&F 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S&F vitreous china squatting pan 'ORISSA PATTERN ' size 580mm x 440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) with 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed

S & F Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size fixed on and including cast iron cantilever bracket (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand and waste pipe complete all as specified and as directed.

S&F PVC connection 15mm dia with Brass nuts of length 450mm etc complete all as specified and as directed.

S &F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wall and complete all as specified and directed.

S &F of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wall and complete all as specified and directed.

S &F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall and complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.

S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and as directed.

M&L for Providing precast cement concrete 1:2:4 type B-0(using 12.5mm graded stone aggregate) as in louvres and jallies, 25mm thick (measured solid), set in cement mortar 1:4 including all mouldings etc complete all as specified and as directed.

M&L for reinforced cement concrete nominal mix type B1 (1:2:4) ( using 20 mm graded stone aggregate ) as in foundation,including raft footings, foundation beams, plinth beams, bases of column etc basement slabs, under-reamed pipe and mass complete all as specified and directed.

M&L for reinforced cement concrete nominal mix type B1 (1:2:4) ( using 20 mm graded stone aggregate ) as in chajja etc complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. etc complete all as specified and as directed.

Use and waste of formwork to chullah hoods, chajjas, troughs and similar items in cluding edges etc complete all as specified and as directed.

S&F 500 litre cap rotational moulded polythelene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part - I including S and F of 20mm dia Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm-210gms) complete all as specified and as directed.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe etc complete all as specified and as directed.

S&F 15mm pillar taps chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe etc complete all as specified and as directed.

S&F 150mm dia bore reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and as directed.

M&L for 150mm dia bore salt-glazed stoneware drain pipes laid in trenches and jointed etc complete all as specified and as directed.

Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm complete all as specified and as directed.

M & L brick work with fly ash bricks (FASB) conforming to IS 12894 of strength M-10, straight or curved on plan exc 6.0 M mean radius built in cement mortar 1:4 complete all as specified and as directed.

M & L brick work with fly ash bricks (FASB) conforming to IS 12894 of strength M-10, straight or curved on plan exc 6.0 M mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and as directed.

S&F redering 5mm thick in cement mortar (1:3) on fair faces of concrete surfaces of ceiling, finish even and fair without using extra cement etc complete all as specified and directed.

S&F 40 mm damp proof course in cement concrete 1:2:4, type B0 (using 12.5mm graded stone aggregate( to horizontal and vertical surfaces including necessary form work complete all as specified and as directed.

M & L for hardcore of brocken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and as directed..

Supply only integral water proofing compound complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and apply three coats of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and apply three coats of white wash complete all as specified and as directed.

M&L for 40mm thick Cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) in bases of floor, surface finish even and smooth with using extra cement. complete all as specified and as directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and as directed.

M&L for glazed ceramic tiles, coloured tiles 300mm x 600mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed.

M&L for non skid ceramic Coloured tiles 7 mm to 8mm thick (Square /rectangular area) area of each tiles exceeding 0.11Sqm but n exc 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar( 1:4) complete all as specified and directed.

M&L 75 mm thick cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in floors/sub base of floor,finish rough to receive the floor finishes etc complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for spreading and levelling soil in layer n exc 25cm thick and well ramming including watering as required complete all as specified and directed.

M&L for rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths) complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) Type C2 using 40mm graded stone agg as in sub base including form work complete all as specified and as diected by engineer in charge.

M&L for 1.25mm thick Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed.

S&F 100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type B-21 all as specified and directed complete.

M&L for false ceiling with 6-7mm thick gypsum board tiles laminated with white PVC film on face side and metalized polyster film (Aluminium foil) on the back side with all four edges sealed with PVC film of size 600x600mm(595x595mm) fixed with clips and screws including anodised aluminium snap grid frame work for false ceiling of Tee/Angle of weight not less than 300gm per RM with slot for fixing including necessary suspender of flat iron or 4mm dia bars of required length fixed in purline of roof not exceeding 1.20m both ways including all accessories required for suspending ceiling work and gypsum board complete all as specified and directed.

Taking down carefully unserviceable aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, lamp holders, sockets, fan regulators, wooden terminal box plastic laminated sheet cover from TW battens including TW batten or drawing from existing conduit removing including TW batten all as specified and as directed by Engr-in-Charge.

Taking down carefully existing wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.

Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.

M & L for concealed point wiring for one light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed .

Description same as per item No 155 above but one fan point controlled by one switch & regulator.

Description same as per item No 155 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

Description same as per item No 155 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

Description all as per item No 155 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.

S&F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed.

S&F ceiling rose,surface PVC/ Polycarbonate 63 x50mm three terminals complete all as specified and as directed.

S&F delux fan regulator electronic rotary step type 240 Volts, 50Hz complete all as specified and as directed.

S & F MCB DB Sheet metal enclosure double door SPN 8 way concealed suitable for distribution board when MCB to be used having 100 Amp rated bus bar 240 volts 2 in 1 shutter type (Metal Door) complete all as specified and as directed.

S&F MCB single pole and neutral 40 Amp/63 Amp 240 V ,10KA , 'C' series, connected with copper lugs complete all as specified and as directed.

Supply and installed hi wall split air cooled split unit inverter air conditioner 1.5 ton electric driven single phase of capacity of units indoor/outdoor complete accessories including suction/discharge pipe with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum BEE 5 STAR RATING AND EER32 of capacity using refregerant gas R-410A/R-32 Eco friendly gas operated condensor coil of AC should be consist of Copper coil. AC installing at varandah/chajja/roof including electrical connection and jointing suction discharge line including instsllation of required length outdoor to inddor unit necessary connection including grouting nuts, bolt, washer and fixing of indoor unit at wall/floorincluding grouting of angle iron 50x50x6mm or factory made metal AC stand of required length including PVC pipe of suitable dia medium grade fixed to wall surface for condensed water outlet complete all as specified and as directed.

Supply,laying connecting and testing in replacement of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V 25 Sq mm 4 core as per IS 7092 Pt-I complete all as specified and as directed.

Supply and lay river bed sand free from sharp materialsa for Sand cushioning for cables 8 cm below the cable and 15 cm above the cable all as specified and directed .

S&F 1100 Volts grade heavy duty ISI marked cable PVC insulated stranded aluminium conductor wire one twin core cable flat or circular of size 10Sqmm to be connected to existing MCB box/main switches complete all as specified and as directed.

S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series, connected with copper lugs complete all as specified and as directed.

Supply and laying un-reinforced precast.concrete cable protection cover of class LV, type-1, flat size 250mm x 150mm x 40 mm, factory made of specified make , complete all as specified and directed.

S&F LED security/street light fittings1x35W LED 5700K energy saving and envoiremental frendly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 luminaire with high power LED as light siurce and electronic driver including suitable size of pipe light grade with bracket, bend to shape 1.80m long with two numbers clamp of size 50mmx6mm with nuts, bolts, washers etc including connection with 1.5Sqmm two single core PVC insulated and PVC sheathed cable stranded copper conductor upto ceiling rose and fixing on wall /pole complete as ditrected by Engineer in Charge. Make: Bajaj Cat Part No BRLEP20WLEDWH or equivalent make as specified in Appendix B to particular specification.

M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into concealed PVC conduit medium grade not less than 25mm dia including all fitting all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and as directed Note:- (a) Two runs of 6 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment.

M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 4 sqmm FRLS, 1100 Volts grade cable drawn into concealed PVC conduit medium grade not less than 25mm dia including all fitting all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and as directed Note:- (a) Two runs of 4 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment.

S & F concealed sheet metal enclosure with two pin socket , chain plug cover with one MCB SP of 20/32 Amp capacity with alignment 10 KA ‘C’ series complete all as specified and as directed.

S&F TPN DB-DPX 125 MCCB Box 4 way double door with provision for DPX 125 MCCBs as incommer concealed on wall and SP/TP MCBs as out going nos of module DPX 125+12 complete all as specified and as directed.

S&F MCCB having breaking capacity of 16KA 415V 4 pole having rating capacity of 63 Amp, Icu= 100%= Ics complete all as specified and as directed.

Supply and installed hi wall split air cooled split unit inverter air conditioner 2.0 ton electric driven single phase of capacity of units indoor/outdoor complete accessories including suction/discharge pipe with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum BEE 5 STAR RATING AND EER32 of capacity using refregerant gas R-410A/R-32 Eco friendly gas operated condensor coil of AC should be consist of Copper coil. AC installing at varandah/chajja/roof including electrical connection and jointing suction discharge line including instsllation of required length outdoor to inddor unit necessary connection including grouting nuts, bolt, washer and fixing of indoor unit at wall/floorincluding grouting of angle iron 50x50x6mm or factory made metal AC stand of required length including PVC pipe of suitable dia medium grade fixed to wall surface for condensed water outlet complete all as specified and as directed.

S&F voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input varriation between 170V to 250V with output voltage stablised at 230V with accuracy of + 2.5% and of capacity 4 KVA complete all as specified and as directed. Make-Voltas/Blue Star/Microtek/V Guard

S&F voltage stablizer for automatic operation single phase naturally air cooled indoor type and designed for input varriation between 170V to 250V with output voltage stablised at 230V with accuracy of + 2.5% and of capacity 5 KVA complete all as specified and as directed. Make-Voltas/Blue Star/Microtek/V Guard

S&F exhaust fan, copper binding, steel body AC, Single Phase, 230V of size 300mm sweep, 1400RPM with blades and frame and louvers including all arrangement of making holes in wall, making good and finishing of disterbed surfaces to match with existing surfaces complete all as specified and as directed.

S&F exhaust fan, copper binding, steel body AC, Single Phase, 230V of size 450mm sweep, 1400RPM with blades and frame and louvers including all arrangement of making holes in wall, making good and finishing of disterbed surfaces to match with existing surfaces complete all as specified and as directed.

Supply and fixing in repair 22W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 22watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge.

S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed

S & F Lamp holder with metal ring ,PVC/ polycarbonate type with back plate suitable for batten fittings complete all as specified as directed

S & F white cover modular plate with frame of 2/3/4 module including fixing modular switch, modular socket & modular regulator complete all as specified as directed.

S & F white cover modular plate with frame of 6/8/12 module including fixing modular switch, modular socket & modular regulator complete all as specified as directed.

S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in Appndx 'B' to PS .

S & F step fan regulator 120W-2 module 240Volts AC 50Hzs complete all as specified as directed

Supply, install, testing and commissioning of "Solar Hot water System" (Flat Plat Collector) based on indirect transfer of heat of capacity 700 LPD with power backup arrangement complete all as specified as directed

S & F Hot water pipe duly insulated with glass wool and aluminium clading 15mm bore complete all as specified as directed

S&F modular switch 1 way 6A, 1 module complete all as specified and as directed.

S&F socket 6A-2/3 pin combined 2 module complete all as specified and as directed.

S&F modular switch 1 way 16A, 1 module 16 Amp complete all as specified and as directed.

S&F socket 6A/16A-6 pin combined 2 module complete all as specified and as directed.

S&F concealed MCB protected power unit include MCB SP 16A to 25A, 220v, 50Hz complete all as specified and as directed. Make Havels Cat Part No: DHDMCSN0251025 or equivalent make as shown in Appendix B to PS.

S&Fceiling fans complete with blades, down rod s, electronic regulators and accessories 230v, 1200mm sweep, minimum air delivery 225CMM with 30Watt consumption, five star rated with brushless direct current motor (BLDC) with 350RPM complete all as specified and as directed.

S&F wall mounting fan of sweep 400mm pull cord oscillating type with ISI marked single piece 3 speed pull cord control complete all as specified and as directed.

Supply and laying GI pipe 50mm bore "LIGHT GRADE" in trenches, under floors, roads, along poles for protection of cables, including sealing ends complete all as specified and as directed.

S&F 36 W 2 feet X 2 feet LED 6500K recess mounting luminaire glare free suitable for armstrong/ grid ceiling in MS housing with high brightness LEDs incl wiring upto and terminating into existing / new ceiling rose complete all as specified and directed .

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

M/S M S Constructions (BID ID -3160243)

DEVENDRA ENTERPRISES (BID ID -3155895)

m/s gupta trading (BID ID -3158888)