Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical ok |
| 2 | Accepted-Technical | Accepted-Technical OK |
| 3 | Accepted-Technical | Accepted-Technical OK |
| 4 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹1.7 L
EMD Value
₹3,360
Closing Date
25 Feb 2026, 11:30 amClosed
DEBRA-I
DEBRA-I
SUBMARSIBLE PIUM BIREN DOLAI HOUSE
2026_ZPHD_1009407_4
DEBRA-1/18/2025-2026
Open Tender
CIVIL WORKS
Percentage
BARAGARH
SUBMARSIBLE PIUM BIREN DOLAI HOUSE
2 documents required · 2 mandatory
₹250
DEBRA-I GP
₹3,360
Yes
BARAGARH
14 Mar 2026
18 Feb 2026
27 Feb 2026
18 Feb 2026
25 Feb 2026
18 Feb 2026
24 Feb 2026
Earth work in excavation of foundation trenches or drain ,in all sorts of soil ….…. Depth of excavation not exceeding 1500 mm
Filling in foundation or plinth by Fine sand in layers not exceeding 150mm . as directed..………including the cost of supply of sand. (Payment may be made on meaurement of finesh quality)
SingleBrickFlat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
(I) Cement concrete with graded stone ballast (40 mm size excluding shuttering), In ground floor (A) [Pakur Variety] (a) 1:3:6 proportion
(125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.
Ordinary Cement Concrete M20 (Mix 3:1.5:1) with graded stone chips (20 mm down) excluding shuttering and reinforcement,if any,in ground floor,as per IS 456-2000. Pakur/Chandil Variety.
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel II. Other than SAIL/ TATA/RINL Item no-40, Page-44 Building Schedule
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns,lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation
(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating,nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (ii) With 1:4 cement mortar (c) 10 mm thick plaster Item no-1, Page-189 Building Schedule
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. Item no-15, Page-192 Building Schedule
Artificialstoneinfloor,dado,staircaseetcwithcementconcrete (1:2:4)with stone chips, laid in panel sasdirected with topping made with ordinary or white cement (as necessary) and marble In ground floor. 3mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). (iii) 35 mm. thick
Labour for boring tube well of required dia water Jet system through any type of soil strata including hire and Labour charges for boring pipes sectolebing, tools & plants as nesesorry and taking out them and lowering pipes, Strainer, blind pipes etc. and fitting & fixing the same compute including bucket washing & other incidental works in this connection. The Tube well showned have a minimum 50mm gap in between the outside of the t/w pipe & the bore. p-49
(a) 100 mm dia PVC pipe (Schedule-40) (ASTM- D- 1785), approved brand , p-14
(b) Supplying high density polythene strainer of approved make with adapter conforming to I.S. 50 mm dia, specifications. p-52
(c) Supplying, fittingand fixing steel cutter piece upto 450 mm long with sockets.
(d)Supplying, fitting and fixing G.I. cap at top
Supplying, fitting, Fixing of submersible 1.00 HP pump of 8th stage of water seal motor including other fittings all complete. (Texmo / KSB/ Medini)
(a) Supplying, fitting, Fixing 40 mm dia UPVC Column pipe of heavy quality(Schedule-80), 3.00m long per pc. (Ori Plast/ Tuff Plast/ Hari Plust/ Ashirbad) p-13
(b) Top adopter set 2'' dia
(c) 100 mm dia GI Clamp
(d) Supplying, fitting, Fixing copper wire 2.5 sq mm 240V/2.5amp with cover for hanging submersible pump as per direction of eic. (Finolex/ Havells)
(e) Control panel board with volt metre with main switch 240 V & 5 amp
(f) 16 amps spl main switch having rewireable type fuse grip (make Havells/ standerd)
(g) Supply of bentonide powder(50 kgs per bag )
(h) Supply of solvent cement
Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete.22/7(0.15x0.15 - 0.10 x0.10)/4 x 30 =0.294 , p-55 , item no-24
Labour for making arrangement for showing verticality test including the cost for hire charges of tools and plants, scafolding, labour etc. all complete. p-55 , item no-22
Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required. p-55 , item no-20
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (b) 1000 litre capacity
Labour for hoisting plastic water storage tank (i) Upto 1500 litre capacity. (a) Upto 1st story from G.L
Labour for punching hole in plastic water storage tank upto 50 mm dia. (3nos hole Punching)
Supply Pipe 20 mm
Supply Pipe 25 mm
Supply Pipe 32 mm
Labour Charge 20 mm
Labour Charge 25 mm
Labour Charge 32 mm
(Z) Compact Compact Ball Valve with SS Handle For CPVC/ UPVC Fittings (As per ASTM D 2467, Schedule 80)
(ii) Polythene Bib Cock / Stop Cock with plastic inlet (EMCO / ATLAS or equivalent) 15 mm
Installation of PVC Stand Post with concrete filling(100 mm dia PVC pipe
Supplying and installation of RCC Platform/Chatal size1200X1200X75
Supplying, fitting, fixing & necessary writing of RCC Display Board at work site
Taking photo at work site (Pre work, ongoing work & complete work)
Unforeseen Items(Construction of Soak pit, silt chember and waste pipe, T, Nahani trap etc fittings. Payments should be made as per actual measurements
stage.html
html • 0.02 MB
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.94 MB
BOQ_2478222.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .