PROVN OF SPL VEH PARKING SHED FOR NINE VEH AND PROVN OF 03XSTELL DOORS WITH STEEL BAR AT AGE B/R-II UNDER GE BABINA.

Amount

Excavating over areas, n exc 1.5m deep and getting out in any type of soil complete all as specified and directed.

Removing excavated at a level n.exc 50m m and depositing where directed at a level n exc 1.5m above starting point complete all as specified and as directed.

M&L, 200 mm thick soling or sub base with broken boulders or quarried stone, inter stices filled, surface formed and rollled and consolidated to required camber and gradient complete all as specified and directed

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as specified and as directed.

Rolling and consolidating formation surfaces in cutting with power roller of capacity exc 8 tonne and n.exc 12 tonne complete all as specified and as directed.

M&L for Stone sett flooring with stone setts of size 200 to 250mm long,150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush etc complete all as specified and as directed.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed.

Material and Labour for PCC 1:4:8 type D-2 using 40 mm stone aggregate as in foundation filling and mass concrete ,SUB BASE OF FLOOR complete all as specified and as directed.

M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L renderig 15mm thick in cement mortar 1:6 on fair faces of brick or concrete surface of wall rendering is to be finished even and smooth with out using extra cement complete all as specified and as directed.

M&L prepation of newly plastered surface of wall and applying three coat of white wash complete all as specified and as directed.

S&F painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

S&F mild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 with and including one shop coat of zinc chrominium primer paint complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165 complete all as specified and as directed.

S & F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L two coat of synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed.

S&F mild steel bolts screw bolts of 16 to 20 mm dia ( Machine made ) with hexagonal or square heads at one end and screwed the other or screwed the both and of suitable length as required at site and fixed in position by any means etc complete all as specified and as directed.

S&F mild steel ( Plain) plate , square cut or notched (ordinary and counter sunk) forming holes of suitable dia etc complete all as specified and as directed.

M&L for reinforced cement concrete Design mix M-25 ( using 20 mm graded stone aggregate ) as in coloumns , pillars , piers , posts, Plinth beam , lintel beam, and struts etc. complete all as specified and directed.

M&L use and waste formwork for to sides of pillar ,post ,struts ,pier column rough finished surfaces of concrete rough finished surfaces of concrete complete all as specified and directed

M&L for mild steel TMT bars ,10mm dia and over, cut to length bent to shape required including cranking bending spirally for hoping for coloumns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M&L for PCC 100 mm thick (1:2:4) type B-0, (using 12.5mm graded stone aggregate) as in floor, finished even and rough complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor or pavings n.exc 15cm thickness (below or above ground floor) complete all as specified at site complete all as specified and as directed.

M&L for 75mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in flooring, plinth protection /path finished even and smooth without using extra cement complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in filling & mass concrete in floor complete all as specified and as directed by Engineer -in-charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade and fixed with grey cement and pigment over and including 50mm thick sand cussion complete all as specified and directed.

M&L brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radious built cement mortar 1:6 complete (on parapet wall) all as specified and as directed.

M&L renderig 15mm thick in cement mortar 1:4 on fair faces of brick or concrete surface of wall rendering is to be finished even and smooth with out using extra cement complete all as specified and as directed.

M & L for preparing new surfaces of wall and applying two coat of oil emulsion distemper on walls complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 exc half brick but n exc one brick complete all as specifed and as directed.

M&L framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders ; framed balusters; walk ways; railings; framework of watertanks and similar work conforming to Fe 290. Gde-E-165 complete all as specified and as directed.

M & L for 1.6mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specifed and as directed.

S&F in repair steel windows Z section with side hung shutters including box type hinges with steel handle, and steel peg stay, glazing bar dovetailed or welded for receiving glass after complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and avg width of aperture 1.40 mm fixed with stainless steel wire staples etc complete all as specified and as directed

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and as dirrected

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping or sides of path/hard standing including necessary form work complete all as specified and as directed by Engineer -in-charge.

Excavation in posts holes (or similar holes) in soft/ loose soil each n. exc 0.50 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm watering and removing surplus soil to a distance n. exc 50m and making good surface complete all as specified and directed.

Ms Vinay constructions (BID ID -3119747)

DEVENDRA ENTERPRISES (BID ID -3134429)

m/s gupta trading (BID ID -3135360)