Construction of Residential Quarter for staff P.S SV and ACB at Chamba Distt, Chamba (SH Building portion, WS and SI, Rain water harvesting system and site development work )

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil setting out true to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailing out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping site including its stacking leveling dressing including all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HPPWD specification. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Excavation in foundation and trenches in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil setting out true to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailing out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the Engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping side including its stacking leveling dressing including all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HPPWD specification. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases.The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in foundation, footing, basis of columns etcetra and mass concrete including all taxes, GST,carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Centering and shuttering with steel plate including strutting, propping etcetera and removal of form work for retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etcetera as per the directions of the Engineer-in-charge including all taxes, GST, carriage of material within all leads, lifts and other incidentals and further as per specification, approved Drawing & Design.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan including all taxes, GST, carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor including all taxes, GST, carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetra upto any thickness including all taxes, GST,carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stair cases with sloping or stepped soffits excluding landing including all taxes, GST,carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls upto all width and heights including all taxes,GST, including carriage of material and other incidentals within all leads and lifts and as per the direction of the Engineer-in-charge.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, in all work up to plinth level using cement content not less than 360 KG/Cum including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, in all work above plinth level up to floor V level using cement content not less than 360 KG/Cum including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone agreegate 20 mm ( twenty millimetre) nominal size) curing complete excluding the cost of form work in all work up to plinth level including all taxes, GST, carriage of material, within all leads, lifts and other incidentals as per the direction of the Engineer-in-charge and as per specification, approved Drawing & Design complete.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone agreegate 40 mm (forty millimetre) nominal size) curing complete excluding the cost of form work in all work up to plinth level including all taxes, GST, carriage of material, within all leads, lifts and other incidentals as per the direction of the Engineer-in-charge and as per specification, approved Drawing & Design complete.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone agreegate 40 mm (forty millimetre) nominal size) curing complete excluding the cost of form work in all work up to plinth level including all taxes, GST, carriage of material, within all leads, lifts and other incidentals as per the direction of the Engineer-in-charge and as per specification, approved Drawing & Design complete.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone agreegate 40 mm (forty millimetre) nominal size) curing complete excluding the cost of form wor in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing including all taxes, GST, carriage of material, within all leads, lifts and other incidentals as per the direction of the Engineer-in-charge and as per specification, approved Drawing & Design complete.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including all taxes, GST ,carriage of material within all leads and lifts and as per the direction of the engineer-in -charge and other incidentals.

Providing & fixing 40 mm (forty millimetre) thick second class deodar wood shutter with pannel of 12 mm thick ( twelve millimetre) phenol bonded pre-laminated board (both side) particle board panneled ISI marked No. IS-12823 including black enamle iron butt hinges with necessary screws complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Steel reinforcement for R.C.C. work of TATA Tiscon/Sail 15342.80 including straightening, cutting, bending, placing in position and binding all complete upto plinth level as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Random rubble masonry/polygonal rubble masonry (uncoursed / brought to courses ) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto twelve graded stone agreegate 20mm (twenty millimetre) nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand) as per the directions of the Engineer-in-charge including all taxes and carriage of material within all leads and lifts and other incidentals.

Stone filling dry hand packed tightly in floor complete including all taxes and carriage of material, as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing 100mm (Hundred millimeter) diametre PVC pipe of Supreme/ Phenolex Weep holes in brick masonry/stone masonry, plain/reinforced concrete abutments, wing walls return walls and retaining /breast walls etcetera extending through the full width of the structure with slope of 1 (V) : 20 (H) (one vertical is to twenty horizontal ) towards drainage face complete as per drawings and MORD technical specifications clause 614, 709, 1204.3.7 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 ( one cement isto six oarse sand) complete including all taxes and carriage of material, as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 ( seven point five) in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 ( one cement isto four coarse sand) complete including all taxes and carriage of material, as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in foundation and plinth in all shapes and sizes in Cement mortar 1:4 ( one cement isto four coarse sand) complete including all taxes and carriage of material, as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 30 mm ( thirty millimetre) thick pre--laminated factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 ( nineteen ) gauge thickness and size of 19 mm x 19 mm ( nineteen into nineteen millimetre) for styles and 15x15 mm ( fifteen into fifteen millimetre) for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm ( five millimetre) thick heat moulded PVC 'C' channel of size 30 mm ( thirty millimetre) thickness, 70 mm ( seventy millimetre) width out of which 50 mm ( fifty millimetre) shall be flat and 20 mm ( twenty millimetre) shall be tapered in 45 ( forty five) degree angle on both side forming styles and 5 mm ( five millimetre) thick, 95 mm ( ninety five millimetre) wide PVC sheet out of which 75mm ( seventy five millimetre) shall be flat and 20 mm ( twenty millimetre) shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineerin- charge, manufacturer's specification & drawing. including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 40 mm (forty millimetre) thick second class deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G(eighty five Gauge) with wire of dia 0.56 mm (zero point five six millimetre) for doors, windows and clerestory windows including with necessary screws complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 250 X 10 mm (two hundred fifty into ten millimetre)as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete 200 X 10 mm (two hundred into ten millimetre)as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 300x16 mm ( three hundred into sixteen millimetre) aluminium sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 ( ten) as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 125 mm (one hundred twenty five millimetre) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental and further as per specification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 100 mm (one hundred millimetre) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental and further as per specification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 150 mm ( one hundred millimetre) ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental and further as per specification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 19mm (nineteen millimetre) thick commercial board water proof board of Uniply/Greenply/Kitply/Centuary ply including shelves and 6 mm ( six millimetre) thick ply both side of cupboard. All cut portion of shutter shall have 6 mm ( six millimetre) thick hard wood edging. The shutter from out side shall to be finished with 1 mm (one millimetre) thick lamination of Centuary ply/Greenply/ Action Tesa i/c fixing with nickel plated piano hinges with screws etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 250 mm ( two hundred millimetre) oxidized hooks and eyes complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg ( thirty kilogram) and door width upto 700 mm ( seven hundred millimetre) , with necessary accessories and screws etcetera complete or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing twin rubber stopper aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera complete complete or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 25 mm ( twenty five millimetre) dia chromium plated brass stainless curtain rod having wall thickness of 1.25mm ( one point two five) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing M.S. plain grills 10x10mm (ten into ten millimetre) square or round bars in combination of 20x4mm (twenty into four millimetre) M.S. flat as per detail of required pattern in frames of windows etc.with M.S.Flats, square or round bars with round headed bolts and nuts or by screws as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and laying vitrified floor tiles double charged size of 600 x 600 mm ( six hundred into six hundred millimetre) of Kazaria/ Somany/ jonhson/Orient-Bell in flooring (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm ( twenty millimetre) thick cement mortar 1:4 ( one cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram/ per square metre) including grouting the joints with white cement and matching pigments etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing non slippery Ceramic floor tiles of Kazaria/ Somany/ jonhson/Orient-Bell of size 300x300 mm ( three hundred into three hundred ) (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm ( twenty millimetre) thick bed of cement mortar 1:4 (one Cement isto four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram/ per square metre) including pointing the joints with white cement and matching pigments etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying 19mm (nineteen millimetre) thick Polished Granite stone in kitchen worktop in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm ( eighteen millimetre) thick stone slab over 20 mm ( twenty millimetre) (average) thick base of cement mortar 1:4 ( one cement isto four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etcetera all complete as specified and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone agreegate 40 mm (forty millimetre) nominal size) curing complete excluding the cost of form work in all work up to plinth level including all taxes, GST, carriage of material, within all leads, lifts and other incidentals as per the direction of the Engineer-in-charge and as per specification, approved Drawing & Design complete.

Providing and laying Vitrified tiles in skirting of Rak/ Kazaria/ Somany/ jonhson/Orient-Bell in flooring (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm ( twenty millimetre) thick cement mortar 1:4 ( one cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram/ per square metre) including grouting the joints with white cement and matching pigments etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 1st quality ceramic glazed tiles of Rak/ Kazaria/ Somany/ jonhson/Orient-Bell conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm ( twelve millimetre) thick bed of cement Mortar 1:3 (one cement isto three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm( three point three kilogram/ per square metre) including pointing in white cement mixed with pigment of matching shade complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing & laying 25 mm ( twenty five millimetre) Kota stone single slab flooring in treads of steps or riser of steps having semi/ round nosing over 20 mm ( twenty millimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, with base of cement mortar 1 : 4 ( one cement four coarse sand) including rubbing and polishing complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing & laying 40 mm ( forty millimetre) thick labrador design series in ramp flooring over 20 mm ( twenty millimetre) (average) thick base of cement mortar 1:5 ( one cement isto five coarse sand) with joints 3 mm ( three millimetre) thick, side buttered with cement mortar 1:2 (one cement is to two stone dust) admixed with pigment to match the shade of stone and pointing with same mortar complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying 60mm ( sixty millimetre) thick cement concrete interlocking paver block of M -30 ( M-thirty) grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm ( fifty millimetre) thick compacted bed of coarse sand, filling the joints with line sand etcetera all complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing ISMC 75 x 40 mm (seventy five into forty millimetre) angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, (thirty five into thirty five into five millimetre) joints mitred and welded by angle iron 35x35x5 mm (thirty five into thirty five into five millimetre) or 35x 5 mm ( thirty five into five millimetre) flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Steel work riveted, bolted or welded in built up section, of Tata/Sail trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the direction of Engineer-In-charge including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

40 mm (forty millimetre)thick 2nd class deodar wood glazed 5mm (five millimetre) thick of Modi guards shutter for doors windows and clerestory windows Including black enamelled iron butt hinges with necessary screws complete as per the direction of Engineer-In-charge including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing & fising 40mm (forty mimmimetre ) 2nd class deodar wood in doors, windows and clerestory window shutters including hinges complete as per the direction of Engineer-In-charge including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing MS handrail made of M.S hollow square / rectangular pipe of 14 to 16 ( fourteen to sixteen ) gauge M.S flat / M.S solid square bars 19mm x 19mm ( nineteen into nineteen millimetre) baluster and balcony railing complete in all respect as per approved drawing , design , specification and direction by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five micron) primer coating and back coat of polyster of 5 microns (five micron) over 5 microns (five micron) primer coating of TATA Durashine / SAIL/ RELIANCE/ ZINDAL STEEL including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as required including all taxes, carriage of material within all leads and lifts and as per specification or as per the direction of the engineer-in-chief and other incidentals.

Providing and fixing ridges or hips 60cm (sixty centimetre) overall 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five microns) primer coating and back coat of polyster of 5 microns (five microns) over 5 microns (five microns) primer coating of TATA Durashine / SAIL/ RELIANCE/ ZINDAL STEELincluding fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as required as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing valleys 90cm (ninety centimetre) overall 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty microns) over 5 microns (five microns) primer coating and back coat of polyster of 5 microns (five microns) over 5 microns (five microns) primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm(six millimetre) dia metre with prepainted limpet washers complete with all accesories as required as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing M.S. B.P. sheet 2 mm ( two milimetre ) thick in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 25 x 30 cm ( twenty five into thirty centimetre) wide, 45 cm ( forty five centimetre) overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm ( forty into three millimetre) size, bolts, nuts and washers etcetera including making necessary connections with rain water pipes complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Applying priming coat of over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter with Readymixed paint brushing wood primer pink as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Painting two or more coats of Asian/Nerolac (excluding priming coat ) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping with enamel paint other than whiteas directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Painting two or more coat of Asian / nerolac (excluding priming coat) on new steel and other metal surfaces under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter with enamled paint other than whiteas directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

6mm (six millimetre) thick cement plaster to ceiling in cement mortar 1:3 ( one cement isto three sand) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Finishing with Epoxy paint (two or more coats) on steel work at all locations prepared and applied as per manufacturer specifications including appropriate priming coat, poreparation of surface etcetera complete as as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Finishing with Epoxy paint (two or more coats) on concrete work at all locations prepared and applied as per manufacturer specifications including appropriate priming coat, poreparation of surface etcetera complete as as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

15mm (Fifteen millimetre) cement plaster in single coat on rough side of brick / concrete / stone masonry for interior plastering upto floor all levels including arises, internal rounded angle, chamfer and / or rounded angle not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement isto six sand) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

15mm (Fifteen millimetre) cement plaster in single coat on fair side of brick / concrete / stone masonry for interior plastering upto floor all levels including arises, internal rounded angle, chamfer and / or rounded angle not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement isto six sand) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

15mm (fifteen millimetre) thick cement plaster in single coat on fair side of brick / concrete / stone walls for interior plastering upto floor all levels including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:4 (one cement isto four sand)as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

20mm (twenty millimetre) thick cement plaster with pattern in plaster single coat on fair side of brick / concrete / stone walls for interior plastering upto floor all levels including arises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:4 (one cement isto four sand) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture of and of required shade of undecorated wall surfaces to give an even shade over and including a priming coat with Alkali-resistance primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smoothas directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Finishing walls with Apex weather proof exterior grade emulsion of Asian paint or exterior emulsion of NAROLAC SURKSHA as per approved shade on undecorated wall surface (two or more coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Applying Birla white/J.K wall care putty over plastered surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matter sand papered smooth to give final matter finish to the surface complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing plinth protection with 40 mm ( forty millimetre) thick interlocking paver block of NTC with 23 cm ( twenty three centimetre) dia half rounded RCC pipe for drainage purpose fixed over 10 cm ( ten cenetimetre) thick cement concrete 1:4:8 ( one cement isto to four course sand and eight isto stone aggregate) bedding and haunching of pipe as per architectural drawing, design and specifications complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 110 mm ( one hundred ten millimetre diametre) on wall face unplasticised Rigid single socketed PVC rain water pipes of Supreme/ Finolex/ Prince conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre) gap for thermal expansion complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 110 mm (one hundred ten millimetre diametre) PVC clamps of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 ( fifty into fifty into fifty millimetre) mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 ( one cement isto four coarse sand) and making good the wall etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing factory made P.V.C. door frame of size 50x47 mm ( fifty into forty seven millimetre) with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing aluminium composite panel ceiling 600 x 600 x 15 mm ( six hundred into six hundred into fifteen millimetre) including prepainted GI channel @ 600 mm C/C ( six hundred millimetre centre to centre) as per detail design, drawing and specification and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying first layer of slurry of cement @ 0.488 kg/sqm (zero point four eight eight kilogram/per square metre) mixed with water proofing cement compound @ 0.253 kg/ sqm. ( zero point two five three kilogram per square metre) This layer will be allowed to air cure for 4 ( four) hours. Second layer of slurry of cement @ 0.242 kg/sqm ( zero point two four two kilogrma/ per square metre) mixed with water proofing cement compound @ 0.126 kg/sqm ( zero point one two six kilogram per square metre) . This layer will be allowed to air cure for 4 (four) hours followed with water curing for 48 ( forty eight) hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and laying damp-proof course 100mm ( one hundred millimetre) thick with cement concrete 1:2:4 (one cement isto twocoarse sand(zone-III) isto four graded stone aggregate 20mm ( twenty millimetre) nominal size). complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 (ten) of approved quality using 1.7kg ( one point seven kilogrma ) per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 110 mm ( one hundred ten millimetre) dia PVC bend of Supreme/ Finolex/ Prince make on wall face unplasticised for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre) gap for thermal expansion complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 110 mm ( one hundred ten millimetre) dia PVC shoe of Supreme/ Finolex/ Prince make on wall face unplasticised for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre) gap for thermal expansion complete as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 8 mm ( eight millimetre) thick cement bonded particle board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately) as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing flashing 38cm ( thirty eight centimetre) overall with 0.60mm ( point six zero milimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns ( twenty microns) over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5 ( five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as per specification, approved drawings, design as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a primming coat of red lead paint in trusses and trusses purlins in buildingas per approved drawing, design & specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government .

Providing and fixing hard drawn steel wire fabric 75x25mm (seventy five into twenty five millimetre) mesh of weight not less than 7.75 Kg/sqm ( seven point seven five kilogram per square metre) to window frame etcetera including 62x19mm (sixty two into nineteen millimetre) beading of second class teak wood and priming coat with approved steel primer all complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) of Hindware / Cera /jaquar with seat and lid, 10 ( ten) litres low level white PVC flushing cistern, including flush pipe with manually controlled device (handle lever) conforming to IS: 7231 with all fitting and fixtures complete including cutting and making good the walls and floor wherever required. WC pan with ISI marked white solid plastic seat and lid. complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing White vitreous China wash basin size 550x400 mm ( five hundred fifty into four hundred millimetre) of Hindware/Cera with a single hole with CI bracket, 15mm ( fifteen millimetre) CP brass pillar tap, 32mm ( thirty two millimetre) CP brass waste of heavy duty make of ISI marked IS No. 8931 & 8934 standard pattern fitting including painting of fitting and brackets, cutting and making good the walls wherever required.

Providing and fixing vitreous China pedestal of Hindware/Cera for wash basin complete recessed at the back for wash basin complete recessed at the back for the reception of pipes and fittings as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing stainless steel Kitchen sink of Diamond/ Unik without drain board 610x510mm ( six hundred ten into five hundred ten millimetre) bowl depth 200mm ( two hundred millimetre) of ISI 304 (18/8) as per IS: 13983 with CI brackets and stainless steel plug 40mm( forty millimetre) including painting of fitting and brackets, cutting and making good the walls wherever required or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 8mm ( eight millimetre) dia CP/SS Jet with flexible tube upto 1.00 (one ) metre long with SS triangular plate to european type W.C. of quality and make as approved by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing15mm (fifteen millimetre) nominal dia CP brass single lever telephonic wall mixer of Hindware/Cera/Jaquar including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing C.P. brass waste of 32mm (thirty two millimetre) dia size for sink or wash basin as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 100 mm ( one hundred millimetre) dia C.P. steel grating for gully trap of heavy duty makes ISI marked IS No. 8931 & 8934 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 600mm X 450 mm (six hundred millimetre into four hundred fifty millimetre) bevelled edge mirror of superior glass mounted on 6mm (six millimetre)thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 600x120x5mm (six hundred into one hundred twenty into five millimetre) glass shelf of Hindware/ Cera/ jaquar with sdges round off supported on anodized aluminium angle frame with C.P. brass brackets and gaurd rail complete fixed with 40mm long screws rawl plugs etc. complete. as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 110mm dia ( one hundred ten millimetre) rigid high pressure PVC spigot and socketed soil waste and ventilating pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 75 mm dia ( seventy five millimetre) rigid high pressure PVC spigot and socketed soil waste and ventilating pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing PVC cowl of supreme/finolex make 75 mm ( seventy five millimetre) diametre as per approved drawing, design & specification or as directed by the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and fixing PVC 110x90mm (one hundred ten into ninety millimetre) dia floor trap ISI Marked of self cleaning design including fixing with approved adhsive, cost of cutting making the walls and floors etc. complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive 110 mm (one hundred ten millimetre) dia as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive 75 mm ( seventy five millimetre) dia as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 110mm ( one hundred ten millimetre) dia PVC door bend with oval access door, insertion rubber washer 3mm ( three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 75 mm ( seventy five millimetre) dia PVC door bend with oval access door, insertion rubber washer 3mm ( three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing CP heavy duty makes ISI marked IS No. 8931 & 8934 liquid soap container 109mm ( one hundred nine ) wide 125mm ( one hundred twenty five millimetre) high and 112mm ( one hundred twelve millimetre) distance from wall of standard shape with bracket of the same material with snap fitting of approved quality and colour weighing not less than 105 gms ( one hundred five grams) complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing CP heavy duty makes ISI marked IS No. 8931 & 8934 PTMT 450mm ( four hundred fifty millimetre) long towel rail with total length 645mm ( six hundred forty five millimetre) width 78mm ( seventy eight millimetre) wide and effective height of 88mm ( eighty eight millimetre) weighing not less than 170gms ( one hundred seventy grams) complete with brackets fixed to wooden cleat with CP brass screws with concealed fitting arrangement of approved quality and colour complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 15mm ( fifteen millimetre) nominal bore G.I. pipe complete with G.I. fitting and clamps including cutting and making good the walls etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 15mm ( fifteen millimetre) nominal bore G.I. pipe complete with G.I. fitting including trenching and refilling etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Making connection of 25 to 40mm ( twenty five to forty millimetre) nominal bore G.I. distribution branch with G.I. and fixing tee including cutting and threading the pipe etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 15mm ( fifteen millimetre) nominal bore C.P. brass bib cock of (heavy duty) akes ISI marked IS No. 8931 & 8934approved quality conforming to IS: 8931 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen millimetre) nominal bore C.P. brass stop cock (concealed) of (heavy duty) makes ISI marked IS No. 8931 & 8934 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen millimetre) nominal bore ball valve (brass) of approved quality High or low pressure with plastic floats complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm ( fifteen millimetre) nominal bore unplasticised PVC connection pipe with brass union complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing C.P. shower rose with 15 or 20mm ( fifteen or twenty millimetre) inlet 100mm ( one hundred millimetre) diameter of (heavy duty) akes ISI marked IS No. 8931 & 8934approved quality conforming to IS: 8931 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 1620 (20 mm OD) Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 (one metre) spacing. This includes the costs of cutting chases and including testing of joints Concealed work, including cutting chases and making good the wall etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 2025 (25 mm OD) Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 (one metre) spacing. This includes the costs of cutting chases and including testing of joints Concealed work, including cutting chases and making good the wall etcetera complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) nominal bore brass valve ( horizontal plunger) type high pressure with polythene plash floats of of (heavy duty) makes ISI marked IS No. 8931 & 8934 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but woithout fitting and base support for tank complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 15mm (fifteen millimetre) nominal bore CP brass angle valve for basin mixer and geyser points of (heavy duty) makes ISI marked IS No. 8931 & 8934 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 (one cement isto four coarse sand) with RCC top slab with 1:1.5:3 mix ( one cement isto one point five coarse sand (zone-III) isto three graded stone aggregate 20mm ( twenty millimetre) nominal size), foundation concrete 1:4:8 mix ( one cement isto four coarse sand isto eight graded stone aggregate 40mm ( forty millimetre) nominal size), inside plastering 12mm ( twelve millimetre) thick with cement mortar 1:3 ( one cement isto three coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20mm ( twenty millimetre) nominal size) finished with a floating coat of neat cement as per standard design. Inside size 90x80 cmx 45 cm. ( ninety into eighty into forty five centimetre) deep including cover with frame (light duty) 455x610 mm ( four hundred fifty five into six hundred ten milimetre) internal dimension, total weight of cover and frame to be not less than 38Kg. ( thirty eight kilogram) (weight of cover 23Kg ( twenty three kilogram) and weight of frame 15 Kg. ( fifteen kilogram) with common burnt clay FPS (non modular) bricks of class designation 7.5. or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 (one cement isto four coarse sand) with RCC top slab with 1:1.5:3 mix ( one cement isto one point five coarse sand (zone-III) isto three graded stone aggregate 20mm ( twenty millimetre) nominal size), foundation concrete 1:4:8 mix ( one cement isto four coarse sand isto eight graded stone aggregate 40mm ( forty millimetre) nominal size), inside plastering 12mm ( twelve millimetre) thick with cement mortar 1:3 ( one cement isto three coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20mm ( twenty millimetre) nominal size) finished with a floating coat of neat cement as per standard design Inside size 120x90 x 90 cm deep ( one hundred twenty into ninety into ninety centimetre) including C.I. cover with frame (medium duty) 500 mm ( five hundred millimetre) internal diameter, total weight of cover and frame to be not less than 116 kg ( one hundred sixteen kilogram) (weight of cover 58 kg ( fifty eight kilogram) and weight of frame 58 kg) ( fifty eight kilogram)with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, dressing of sides, ramming of bottom, depth upto 1.5( one point five) metre including getting out the excavated soil and then returning the soil as required in layers not exceeding 20cm ( twenty centimetre) in depth including consolidating each deposited layer by ramming, watering etcetera and disposing of surplus excavated soil as directed within a lead of 50 ( fifty) metres Pipes and cables exceeding 80mm ( eighty millimetre) dia but not exceeding 300mm ( three hundred millimetre) diametre or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government .

Constructing brick masonary chamber for underground C.I ( cast iron) inspection chambers and bends with common burnt clay building bricks in cement mortar 1:5 ( one cement is to five sand) including cover with frame (light duty) size 455mm x 610 mm internal diamention total weight of cover with frmae to be not less than 38 KG ( thirty eight kilogram) ( weight of cover 23 kg and weight of frame 15 kg) RCC top slab with 1:2:4 mix foundation concrete 1:5:10 inside plaster 15 mm thick with cement mortar 1:3 with a floating coat of neat cement on walls and bed concrete etctera complete as per approved drawing, design & specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, sale tax, GST or any other taxes imposed by the Government .

Providing and fixing 15mm (fifteen millimetre) nominal bore ball valve (brass) of approved quality High or low pressure with plastic floats complete complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing 20 mm (twenty millimetre) nominal bore G.I. pipe complete with G.I. fitting and clamps including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing and fixing in position water lifting pump (toollu pump) having 3.00 ( three) horse power capacity of Kirloskar or equivilent make ISI mark including all necessary fitting required at site complete in all respect as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

RGIENTERPRISES