KDL CTRT Civil CISF Barrack 14 25 26 23

N.M.D.C. LIMITED

(A Government of India Enterprise)

BAILADILA IRON ORE MINE, KIRANDUL COMPLEX

Name of the Work : “Construction of First floor of CISF Barrack at Deposit-14.”

Ten. Enq. No.:KDL / CTRT / Civil-CISF Barrack-14/ 25-26/ 23 Dated: 13.03.2026

MSTC ET No.: NMDC/Kirandul/Contract/57/25-26/ET/749 [Const of first floor at Dep-14]

Sl. No. Descritption / Price quoted for Amount

1 Total Amount of Schedule A - Civil Works

2 Total Amount of Schedule B - Toilet fittings

3 Total Amount of Schedule C - Electrical Works

Total Quoted Amount

1. Free Issue Material: NIL

2. Fill up the prices in the both sheets of Excel (Sch A, Sch B & Sch C)

N.M.D.C. LIMITED

(A Government of India Enterprise)

BAILADILA IRON ORE MINE, KIRANDUL COMPLEX

Name of the Work : “Construction of First floor of CISF Barrack at Deposit-14.”

Ten. Enq. No.:KDL / CTRT / Civil-CISF Barrack-14/ 25-26/ 23 Dated: 13.03.2026

MSTC ET. No.:NMDC/Kirandul/Contract/57/25-26/ET/749 [Const of first floor at Dep-14]

Schedule A - Civil Works

Name of The Bidder:

Item No. Description Unit Quantity Rate Amount

1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. cum 100

2 Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains not exceeding 1.5m in width or 10 sqm on plan including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. Hard rock (blasting prohibited) cum 100

3 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. cum 200

4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). cum 23

5 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) cum 54

6 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) cum 466

7 Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in shelves including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) cum 69

8 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars. kg 58900

9 Centering and shuttering including strutting, propping etc. and removal of form for : sqm

b) Columns, Pillars, Piers, Abutments, Posts and Struts. sqm 548

c) Lintels, beams, plinth beams, girders, bressumers and cantilevers. sqm 3632

10 Providing and fixing precast masonry block walling using 300 X 200 X 150mm & 300 X 100 X 150mm size made of 50% cement concrete 1:5:8 ( 1 cement: 5 coarse sand : 8 graded stone aggregate 10mm and down gauge) and 50% graded stone aggregate of 100mm and down size by volume of each block. Placing of blocks shall be done with CM 1:6 ( 1 cement : 6 coarse sand). All work upto floor five level. cum 670

11 Providing and fixing pressed steel door frames conforming to IS: 4351 manufactured from commercial mild steel sheet of 1.60 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.60 mm pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges, 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B mtr 206

12 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood 35 mm thick shutters sqm 96

13 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Second class teak wood sqm 77

14 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a UPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. sqm 51

15 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mm X 25mm or less as per requirement with an average wall thickness of 1mm (± 0.3mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. An M.S. tube having dimensions 19mm x 19mm and 1.0 mm (± 0.1mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25MM X 11MM. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures' specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places sqm 108

16 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300x16 mm each 76

17 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 250x10 mm each 76

18 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm each 304

19 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

100 mm each 608

20 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. kg 9000

21 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion

A Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 1556

B Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) kg 1296

22 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness sqm 130

23 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood cum 2

24 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand). cum 2

25 20 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) sqm 2024

26 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) sqm 2554

27 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) sqm 1680

28 6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand) sqm 2408

29 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete sqm

30 Finishing walls with washable interior emulsion of approved shade, quality of reputed brand, at all location inlcuding preparation of surface i.e. cleaning the surface, filling of polymer paste/ polymer modified mortar in cracks and holes, where necessary , cleaning of glass, fitting s drops and spalshes , repairing of small damages etc. complete with quality workmanship by giving smooth finish with roller/brush etc. as per instruction of Engineer In Chrge of approved make such as : Narolac Beauty silver smooth emulsion/ Tractor Emulsion (Asian)/Dulux Superocat interior emulsion/Rnagoli Total emulsion.New work (two or more coats) over and including water thinnable priming coat with cement primer. sqm 6641.6

31 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. sqm 2023.2

32 Finishing walls with water proofing elastomeric coating with crack bridging ability for exteriors of approved shade quality of reputed brand at all heights and location inlcuding preparation of surface i.e. cleaning the surface, filling of polymer paste/polymer modified mortar in cracks and holed, where necessary cleaning of glass, joiner, fitting drops and splashes, repainring of small damages etc. complete with qulaity workmanship by giving smooth finishes with roller/brush etc. in one coat of APEX Ultima Protect base coat (primer) or equivalent make and quality complete as per instruction of Engineer In Charge of approved make such as : Excel Total (Nerolac)/ Apex Ultima Protec(Aisian)/ Dulux Weather shield Max(ICI)/Weather coat all guard (Berger) New work (two or more coats aplied with 400 ml water to 1000 ml paint. Over and including priming coat of exterior primer with no dilution. sqm 2023.2

33 Providing and laying Ceramic glazed floor/ designer tiles 300x300 mm or any size (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. sqm 3031.2

34 Providing and fixing Ist quality ceramic glazed wall/ designer tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sqm 284

35 Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) sqm 192

36 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. sqm 759.2

37 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws. sqm 152

38 Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150mm sqm 152

39 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cum 211

40 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) each 456

41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes. 110 mm diameter metre 172

42 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 110 mm each 43

43 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm each 43

44 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend each 10

45 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Bend 87.5° Shoe (Plain) 110 mm Shoe each 10

46 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm each 129

47 Providing and fixing 100mm sand cast Iron grating for gully trap each 10

48 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : i) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) sqm 20

49 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: 35 mm thick shutters. with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood. sqm 41

50 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil cum 18

51 Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes. kg 9981

52 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick flat. sqm 784

TOTAL AMOUNT OF SCHEDULE A

N.M.D.C. LIMITED

(A Government of India Enterprise)

BAILADILA IRON ORE MINE, KIRANDUL COMPLEX

Name of the Work : “Construction of First floor of CISF Barrack at Deposit-14.”

Ten. Enq. No.:KDL / CTRT / Civil-CISF Barrack-14/ 25-26/ 23 Dated: 13.03.2026

MSTC ET. No.:NMDC/Kirandul/Contract/57/25-26/ET/749 [Const of first floor at Dep-14]

Schedule B - TOILET FITTINGS

Name of The Bidder:

Item No. Description Unit Quantity Rate Amount

1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. each 10

2 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern. each 6

3 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. each 4

4 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. each 8

5 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. each 4

6 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989. each 12

7 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter each 10

8 Providing and fixing brass stop cock of approved quality : 15 mm nominal bore each 20

9 Providing and fixing brass bib cock of approved quality : 15 mm nominal bore each 20

10 Providing and fixing soil, waste and vent pipes : 100 mm dia. Sand cast iron S&S pipe as per IS: 1729. meter 1

11 Providing and fixing single equal plain junction of required degree : 100x100x100 mm Sand cast iron S&S as per IS - 1729 each 10

12 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia each 20

13 Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore each 20

14 Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100 mm Sand cast iron S&S as per IS - 1729 each 20

15 Providing and fixing plain bend of required degree. 100 mm Sand cast iron S&S as per IS - 1729 each 10

16 Providing and fixing terminal guard: 100 mm Sand cast iron S&S as per IS - 1729 each 6

17 Providing and fixing collar: 100 mm Sand cast iron S&S as per IS - 1729 each 10

18 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc. : For 100 mm dia. Pipe each 10

19 Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 100 mm dia pipe each 20

20 Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. each 20

21 Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size ) including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 100 mm dia. meter 15

22 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work 50 mm nominal outer dia .Pipes. meter 50

23 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work – Exposed on wall. 25 mm dia. nominal bore meter 100 551.7

24 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work – Exposed on wall. 15 mm dia. nominal bore meter 100

25 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 50 mm nominal bore. each 5

26 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 25 mm nominal bore. each 15

27 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 15 mm nominal bore. each 10

28 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore each 4

29 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore each 10

30 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank per litre 10000

31 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore each 5

32 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore each 2

33 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. meter 100

34 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design: 150 mm diameter S.W. pipe meter 100

35 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter meter 50

36 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 15

TOTAL AMOUNT OF SCHEDULE B

N.M.D.C. LIMITED

(A Government of India Enterprise)

BAILADILA IRON ORE MINE, KIRANDUL COMPLEX

Name of the Work : “Construction of First floor of CISF Barrack at Deposit-14.”

Ten. Enq. No.:KDL / CTRT / Civil-CISF Barrack-14/ 25-26/ 23 Dated: 13.03.2026

MSTC ET. No.: NMDC/Kirandul/Contract/57/25-26/ET/749 [Const of first floor at Dep-14]

Schedule C - ELECTRICAL WORKS

Name of The Bidder:

Item No. Description Unit Quantity Rate Amount

1 Point Wiring for light point/ fan point/ exhaust fan point/ call bell point /Telephone point with 1.5 sq.mm FR / FRLS PVC insulated copper conductor single core cable / Telephone cable of 0.6 sq.mm in surface / recessed medium class PVC conduit or Casing / Capping, with piano type switch, switch boards, Ceiling Rose, RJ11 Telephone Socket, surface / recessed steel conduit, with modular switch, modular plate, suitable GI boxand other material. Earthing the point with 1.5 sq.mm FR / FRLS PVC insulated copper conductor single core cable etc. as required.Rates are equal for short, medium and long points. Nos. 392

2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR / FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. The work includes all the terminations at both ends

a 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire mtr 3136

b 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire mtr 1655

c 2 X 4 sq. mm + 1 X 4 sq. mm earth wire mtr 1000

d 2 x 6 Sq.mm + 1 x 6 Sq.mm earth wire. mtr 390

e 4 X 10 sq. mm + 2 X 6 sq. mm earth wire mtr 300

f wiring with 2 pair 0.5 mm unarmored anneled copper telephone cable mtr 300

3 Point wiring in surface / recessed for 5 pin 5 amps modular mutipurpose socket outlet point on same board in recessed in medium class PVC conduct, Connection with 1.5 sq. mm. FRLS PVC insulated copper multistrand Conductor for phase, neutral & earthing. Including ISI marked modular Switches ,modular Sockets,Wires and other items. Nos. 185

4 Point wiring in surface / recessed for 5 pin 5 amps modular plug point multipurpose socket outlet point with 3 x 2.5 sq. mm. FRLS PVC insulated multistrand copper conductors for phase neutral & earthing on separate ISI marked modular Switches, Sockets, modular plate, suitable GI box Complete in all respect. Rates are equal for short, medium and long points. Nos. 77

5 Point wiring in surface / recessed for 6 pin 15/16 amps modular combo / switch -socket multipurpose socket outlet point with 3 x 4 sq. mm. FRLS PVC insulated multistrand copper conductors for phase neutral & earthing on separate ISI marked modular Switches, Sockets, modular plate, suitable GI box Complete in all respect. Rates are equal for short, medium and long points. Nos. 85

6 Supply and fixing Modular telephone socket RJ 11 on the existing switch box / cover including connections etc. as required. No. 3

7 Supplying and fixing metal box of 150 X 150 X 60 size (Nominal Size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required for telephone / Internet connection termination in complete No. 3

8 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. Nos 8

9 Supplying and fixing modules, GI box of 4 Module (125mmX75mm) alongwith modular base & cover plate for modular switches in recess etc. as required. No. 15

10 Supplying and fixing modules, GI box of 6 Module (200mmX75mm) alongwith modular base & cover plate for modular switches in recess etc. as required. No. 15

11 Supplying and fixing modules, GI box of 8 Module (125mmX125mm) alongwith modular base & cover plate for modular switches in recess etc. as required. No. 20

12 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. Nos. 200

13 Supply and fixing of following sizes of medium class ISI marked PVC conduit / casing caping (as required) along with accessories on surface / recess including cutting the wall and making good the same in case of recessed conduct as required.

a 25 mm size mtr 200

b 32 mm size mtr 100

c 40 mm size mtr 100

14 Supply and fixing of 3 pin 5 Amp ceiling rose including connection on the existing board as required. Nos. 100

15 Supply and fixing of Batton holder. Including all the necessary items required. Nos. 64

16 Installation ,Testing, Commissioning of wall bracket /ceiling fittings / LED Batten of all sizes / Exhaust Fan / LED Strip light and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required Nos. 217

17 Installation testing and commissioning of ceiling fan, including wiring the downrod of length 30 cm Exra down road of 20 cm and 10 cm ie. down rod length required is 60 cm, with 1.5 Sq. mm. FRLS PVC insulated, copper conductor, single core cable etc as required with supply and fixing of anchor fastener. Nos. 64

18 Supply and fixing of, 240 V, 50 Hz, MCB Distribution board, SP DB (2+6 way) Dauble Door, IP20 with provisions of Neutral/Earthing distribution links. (But without MCB / RCCB / Isolator). The DB has to be fitted on the required size of fabrIcated frame & grouted or partially/completely consealed on the wall or fixed on the Dec. top Wooden board of appropriate size, as per the site condition. Complete in all respect. Nos. 12

19 Supply and fixing of, 240 V, 50 Hz, MCB Distribution board, SP DB (12+4 way) Dauble Door, IP20 with provisions of Neutral/Earthing distribution links. (But without MCB / RCCB / Isolator). The DB has to be fitted on the required size of fabrIcated frame & grouted or partially/completely consealed on the wall or fixed on the Dec. top Wooden board of appropriate size, as per the site condition. Complete in all respect. No. 8

20 Supply and fixing of 5 -32 Amp MCB (As required) rating single pole 240 V, 'C' curve MCB in the existing MCB DB complete with connection testing and commissioning etc.. As required. No. 104

21 Supply and fixing of 40 Amp MCB (As required) rating Single pole and neutral 240 V, 'C' curve MCB in the existing MCB DB complete with connection testing and commissioning etc.. As required. No. 2

22 Supply and fixing of 40 Amp (As required) rating double pole 240 V, 30 ma sencitive RCCB in the existing MCB DB complete with connection testing and commissioning etc.. As required. No. 25

23 Supply and fixing of 63 Amp (As required) rating four pole 440 V, 30 ma sencitive RCCB in the existing MCB DB complete with connection testing and commissioning etc.. As required. No. 3

24 Supplying and fixing 40 A rating, Four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. Nos 12

25 Supplying and fixing 63 A rating, Two pole, (Single Pole and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. Nos 8

26 Air Conditioner Point wiring for 6 pin 20 Amps modular socket outlet point, with supply and fixing of 25 / 32A DP MCB, With DP MCB sheet steel enclosure, point wiring with 2 x 4 sq. mm. FRLS / FR PVC insulated multistrand copper conductor single core cable in Surface/ Recessed (consealed) medium class PVC conduit/ casing caping, with modular plate, suitable GI box and earthing the point with 4 sq.mm. FRLS / FR PVC insulated copper conductor single core cable etc as required. Rate shall be same for short, medium and long points. Nos 6

27 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. No. 46

28 Supplying installation, Testing and commissioning of astronomical timer switch with a sheet steel / Fiber Enclosure, The timer should featured with automatic switching On & Off of street lights at sun set & rise on override facility with 12/24 hours display format with suitable battery and indication for relay status I/C programming at site complete as required, With 4 pole MCB of 63 A, along with 3 Phase Contactore of 40 A, AC3 Rating, Suitable for three phase distribution, with necessary pushbutton and manual selection facility. Nos. 1

29 Providing and fixing circular/ hexagonal G.I. box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick g.i. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the g.i. box by means of 3.3 mm dia round headed screws, one lock at the corners. clamp shall be made of 12 mm dia m.s. bar bent to shape as per standard drawing. Nos. 64

30 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required Nos. 64

31 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long of 2.5 inches dia etc. The work includes supply of all the required materials & digging of suitable pit and filling with salts, charcoal and sand in layers, all around the electrode, as per the standard practice . After settling of the soil making Brick masonry chamber of size of 600x600x300 mm and the chamber shall be covered with a concrete (1:4:8) slab of size of 600mm x 600mm of around 50mm thick to fit on the chamber at the top. Numbering and lettering the pit with Black and yellow paint as required. Nos. 8

32 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level / on surface in conduit for conductor earth electrode, including connection/ termination with GI thimble etc. as required. The work includes bending dressing etc. Mtr 100

33 Supply, Installing, testing and commissioning of 100 Amp capacity TPN Box made of 1.6 mm thick sheet steel enclosure duly painted with powder coating on existing rising, mains complete TPN disconnector FSU and along with HRC fuses, and connections, earthing etc have to be done as required No.s 1

34 Supply, Installing, testing and commissioning of 200 Amp capacity TPN Box made of 1.6 mm thick sheet steel enclosure duly painted with powder coating on existing rising, mains complete TPN disconnector FSU and along with HRC fuses, and connections, earthing etc have to be done as required No.s 1

35 Supply, fabricating, and Installing, the street / Flood Light light Bracket for fixing Street Light fittings / Flood Light Fitting / Blinkers / Post Top Lantern as per the shape given by the Engineer Incharge, it should be made with 1 meter lenghth 40 mm diameter, GI medium class pipe, 4 No. 16 mm nuts and bolts, 2 No. GI flat of 3 mm thick and 200 mm length, 40 mm width, for fixing the bracket to the wall / pole, complete with all accessories including fixing the fitting and making all necessary connections etc. as required. No. 20

36 Laying of one no. PVC/ XLPE insulated PVC sheathed armoured power cable of 1.1 KV grade direct in ground including excavation, and refilling the trench, including sand cushioning, protective covering. Complete termination and connection with lugs etc as required- above 95 sq. mm. and upto 185 sq. mm. Mtrs. 495

37 Laying of one addtional no. PVC/ XLPE insulated PVC sheathed armoured power cable of 1.1 KV grade direct in ground including excavation, and refilling the trench but excluding sand cushioning, protective covering. Complete termination and connection with lugs etc as required- from 95 to 185 Sq. mm Mtrs. 495

38 Laying of one no up to 50 pair 0.9 sq. mm copper telephone cable direct in ground including excavation, sand cushioning, protective covering, refilling the trech. Complete termination and connection etc as required. Mtrs. 495

39 Supplying and laying of 90 mm dia (OD-90 mm & ID-76 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. Mtrs. 12

40 Making hole for installation of exhaust fan of size up to 450mm sweep by demolishing brick work manually / by mechanical means including disposal of malba within 50 meters lead and making good the wall by plastering 1:6 (1 cement: 6 fine sand) etc. as required. Nos. 19

41 Erection & commissioning of Street / GRP Light Tubular or rail pole. The work involves shifting of Poles from electrical section to the site, digging (min.1/7th Of the length of the pole) and concreeting up to 1 meter depth, and collar of 200 mm above the ground, mounting of poles vertically on the pit, jamming with concrete 1:3:6(1 cement:3 coars sand:6 graded stone aggregate 40mm nominal size) Inclusive of all the required materials like cement, ballast, sand etc. Nos 8

42 Supplying and fixing the Good Quality wooden board of size 20"x11"X3"with wooden plank, side wall and base and on top for fixing of ELCB/MCB/DB/Energy meter complete in all respects. Nos. 23

43 Supply of approved make LED batten 20 Watt, Voltage range 110 to 270 V, 50 HZ, Glare free lighting(with diffuser), With Internal Surge Protection of MIN 2 KA, IP 20 Lamp Shell Material Should Be of Polycarbonate / Aluminium MAKE: BAJAJ / PHILIPS / GE / CROMTON / HAVELLS / SURYA / WIPPRO / SYSKA / OSRAM / HALONIX/ORIENT Nos. 50

44 Supply of approved make Emergency LED batten 20 Watt, Voltage range 110 to 270 V, 50 HZ, Glare free lighting(with diffuser), With Internal Surge Protection of MIN 2 KA, IP 20 Lamp Shell Material Should Be of Polycarbonate / Aluminium MAKE: BAJAJ / PHILIPS / GE / CROMTON / HAVELLS / SURYA / WIPPRO / SYSKA / OSRAM / HALONIX/ORIENT Nos. 119

45 Supply of approved model exhaust fan 300 mm sweep, 1500 RPM, epoxy powder coated, double ball bearing, metal blade complete with frame bracket but without regulator. Rating : 230 V, 50 Hz, Energy efficient With ISI Mark. Complete with all necessary accessories. MAKE : BAJAJ/CROMPTON/ALMONARED/ORIENT/KHAITAN/USHA/HAVELLS/HALONIX Nos 19

46 supply of flood light lumn. 250 w flood light led luminaire / fitting , outdoor application, ip 66 class protection. luminaire to be provided with mounting bracket suitable for tower / pole mounting. the luminair shall be capable of producing 120 lux for each watt. secondary lence should be provided on the led. the luminaire shall be suitable for working on 230 v, a.c 50 hzs & complete with driver. the inbuilt driver shall have inbuilt surge and overcurrent / overload protection. internal surge protection of min 3 ka and external surge protection of min 7 ka. led colour : yellow colour (2700 to 3500 k) led conforming to lm 80 and lumen output to lm 79 and should also produce the certificate. type test report should be produced. valid bis certificate should be produced. make: bajaj / philips / ge / cromton / havells / surya / wippro / syska / osram / halonix/orient Nos. 20

47 supply of well glass luminaire fitting of 45 - 60 w, outdoor application, ip 66 class, luminaire to be provided with mounting bracket suitable for tower / pole mounting. the luminair shall be capable of producing 120 lux for each watt. secondary lence should be provided on the led. the luminaire shall be suitable for working on 230 v, a.c 50 hzs & complete with driver. the inbuilt driver shall have surge and overcurrent / overload protection. internal surge protection of min 3 ka and external surge protection of min 7 ka. led colour : yellow colour (2700 to 3500 k), with glare free diffuser led conforming to lm 80 and lumen output to lm 79 and should also produce the certificate. type test report should be produced. valid bis certificate should be produced. make: bajaj / philips / ge / cromton / havells / surya / wippro / syska / osram / halonix / orient Nos. 48

TOTAL AMOUNT OF SCHEDULE C