SPECIAL REPAIR OF SECURITY LIGHTS IN TECHNICAL AREA AT AF STN BKT

Amount

Taking out old serviceable/ unserviceable cable of size 2/4/3.5 core, up to 35 sqmm of any make/ type and keeping aside for the purpose of rerouting/ relaying in new location/ for requisite replacement/ further disposal complete all as specified and directed.

M&L for LT UG cable of size 4 core 16 Sqmm aluminium conductor XLPE insulated and sheathed armoured , heavy duty 1100 volts in trenches/poles/surface complete all as specified and directed.

M&L for LT UG cable of size 4 core 25 Sqmm aluminium conductor XLPE insulated and sheathed armoured , heavy duty 1100 volts in trenches/poles/surface complete all as specified and directed.

M&L for LT UG cable of size 3.5 core 35 Sqmm aluminium conductor XLPE insulated and sheathed armoured , heavy duty 1100 volts in trenches/poles/surface complete all as specified and directed.

Re-laying of serviceable (as obtained from taking out) cable of size 2/4/3.5 core, up to 35 sqmm of any make/ type inclung making electrical connection complete all as specified and directed. (Note: Earth work shall be measured & paid separately).

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep in soft/loose soil) for laying of cables or GI pipe and getting out including levelling of bottom suface to required level complete all as specified and directed

Removing excavated material (ie soil) from site to a distance not. exceeding 50 m away and depositing where directed at a level not. exceeding. 1.5 m above the starting point complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming soil in layers not exceeding 25 cm thick all as specified and directed.

Supply and laying coarse sand dry as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) and gently punned down to 18 cm thickness complete all as specified and as directed.

Supply & laying in replacement unreinforced precast concrete cable cover class LV, Type 1, flat size 250 mm x 150 mm x 40 mm as a cable protection on LT underground cables complete all as specified and directed.

M & L for Boring of holes under road, pavement, hard standing by mechanically or any means including GI pipe of 150 mm dia complete all as specified and directed.

Dismantling of old unservceable steel tubular poles/Rail pole of 9 to 13 Mtr hight embedded in concrete including braking of same upto bottom of foundation complete all as specified and directed.

M&L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in foundation of poles complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 using 40 mm graded stone aggregate as in foundation, coping filling and mass concrete etc complete all as specified and directed.

Supply erection in trully vertical position of steel tubular swaged pole (410 SP-31), 09 mtr long, complete with cast iron base plate, pole cap/ finial taper plug, bolts, nuts and washers welded reduced section and logitudinal weld through entire length of pole including 2 coats of black bituminous paint externally up to planting depth and remaining exterior portion of pole shall be provided with one coat of red oxide primer and two coats of aluminium paint and numbering of the pole etc, complete all as specified and directed.

Supply, installation and fixing of 06 mtr height trully vertical GFRP/ MS sheet duly polyurethane painted street light decorative square pole having bottom size 150mm x 150 mm and base plate of size not less than 220mm x 220 mm up to 12 mm thickness, of bn any colour (as approved by GE in writing) having capacity to bear with wind speed @ 150 Km/hr, environmentally friendly aesthetic look. pole shall be Lab tested and having provn of profile light two/ three side for minium 3 mtr including IP-66 protection in multi colour decorative fancy single arm bracket of suitable size to in built 2x60 watt LED light (make-Phillips/ Bajaj/ Crompton/ Havells) with prewired for lights & profile lights including foundation base plate, nuts and bolts of suitable size etc complete all as specified and directed. Note: Excavation, earth work and PCC foundation shall be included in quoted unit rate.

S&F in repair, Cable junction box made of polycarbonate, ''halogen free and weather proiof', for outdoor installation (with metric knockouts for cable entry) IP-66 protection of size 200mm x 140 mm x 95 mm including short cable eantry gland tread type with lock nut, four way bakelite terminal with brass studs and nuts, GI flat strip clamps of size 25mm X 3mm with bolts, nuts and washers for fixing with MCB one 06 Amps inside the junction box complete all as specified and directed.

Taking down old unserviceable street light fitting any type LED fittings any wattage from pole/ bldgs for depositing in store for refixing the same complete all as specified and directed.

S&F in repairs of LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp , surge protection device and corrosion resistant including thermal management complete with IP 65/66 protection complete all as specified and directed. Make- Phillips/ Bajaj/ Crompton/ Havells

Refixing Steet light fitting obtained from item No.18 given here-in-before with bolts, nuts & screws and bracket complete all as specified and directed.

S&F in street light bracket, clamps, nuts and bolt made out of 32 mm dia light grade GI pipe (length of pipe should not be less than 1.2 mtrs) , two set of clamp made out of 25 mm x 3 mm flat iron, nuts & bolts as required , bend to shape and fixing arrangement duly welded complete all as specified and directed.

S&F 1.5 Sq.mm 2 core, 240 volts Copper Conductor cable heavy duty PVC insulated, round sheathed complete all as specified and directed.

S&F three phase Street light control PVC Enclousures , IP 66 with timer , contactor rating 40 Amp/TP, MCB rating 40 Amp/TPN, Astronomical type, Max load 12-18 KW, complete all as specified and directed.

M&L for earthing with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6 mm buried directly in ground (earth pit not less than 2.25 Mtr below normal ground level) connected to galvanized earth lead wire of size 4.0 mm by means of bolts, buts, check nuts and washers of galvanized iron on steel including 15 mm dia medium grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm dia charcoal or coke and common salt in alternative layer not exceeding 150 mm thick compacted thickness all around the electrode with concrete earth pit of PCC (1:3:6) type C-1 using 20 mm graded stone aggregate and RCC cover of size 540 x 540 x 50 mm in RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 100mm centre to centre both ways and suitable handle made of 10 mm dia round bar including GI wire 4 mm for extension of earth lead including all excavation, earth work in soil/ loose soil and disposal to a distance not exceeding 15 Mtr and necessary connection and testing as shown on electrical plate No 3 complete all as specified and as directed.

FUTURE Inc. (BID ID -3438894)

M/s JS Constructions (BID ID -3444270)

Yaduvanshi Traders (BID ID -3438573)

PANKAJ AND BROTHERS (BID ID -3437824)

Bharat Sales Corporation (BID ID -3432983)

MUKHERJEE ENTERPRISE (BID ID -3437909)