Electrical renovation and power distribution work in Compressor House, Sheet Metal Shop and LTA Sub-Station including allied work at HAL Factory

Name of the Firm/Agency :

HINDUSTAN AERONAUTICS LIMITED TRANSPORT AIRCRAFT DIVISION KANPUR

Name of work:-Electrical renovation and power distribution work in Compressor House, Sheet Metal Shop and LTA Sub-Station including allied work at HAL Factory.

Cont.No.MW/ELE/383/1

BILL OF QUANTITIES WITH SPECIFICATIONS

Preamble: The tenderers are requested to read the following before quoting:

1 The payment terms shall be governed as per the terms indicated in special conditions of contract.

2 Basic Rate to be quoted for each item. Subject work is called on works contract basis and prevailing GST of 18% has been added in the BOQ on overall total. Any revision on this GST rate is to HAL account.

3 Successful offer that is L-1 (Lowest offer) will be determined including GST.

4 Amount towards GST will be paid along with RAR payment against invoice.

5 The tenderers are requested to abide by the rules of prevailing GST act.

6 This BOQ specification has to be read in conjunction with technical specifications and tender drawings. Any ambiguity in these have to be brought to the knowledge of contract section before submission of tender to avoid future claims/dispute.

Sl. No Specification of item Quantity Unit Rate in Figs excluding GST Rate excluding GST in words Amount Excluding GST in Figs (E=A*C)

1 Supply, fixing installation, testing and commissioning including foundation / civil work as required at compressor house L.T. panel -IV ACB 2000 Amp dust and vermin proof L.T. distribution panel board as per applicable latest IS, CPRI approved fabricated with min 14 SWG CRCA sheet floor mounting on M.S. channel base frame indoor type front and rear openable. Complete in all respects and site requirement or directed by EIC. Work including foundation / civil work as per site required. Detail specification as per attach Annexure-I and site requirement or directed by EIC. 2 Each No Rupees Only 0.00

2 Supply of 1.1 KV grade of 400 sq.mm X 3½ core power cable complete testing and commissioning XLPE insulated Aluminium conductor armoured underground LT cable. As per site requirement or directed by EIC. Make: Gloster, Havells, KEI, Polycab, Finolex. 2,000.00 Meter No Rupees Only 0.00

3 Supply of 1.1 KV grade of 240 sq.mm X 3½ core power cable complete testing and commissioning XLPE insulated Aluminium conductor armoured underground LT cable. As per site requirement or directed by EIC. Make: Gloster, Havells, KEI, Polycab, Finolex. 300.00 Meter No Rupees Only 0.00

4 Supply of 1.1 KV grade of 35 sq.mm X 3½ core power cable complete testing and commissioning XLPE insulated Aluminium conductor armoured underground LT cable. As per site requirement or directed by EIC. Make: Gloster, Havells, KEI, Polycab, Finolex. 300.00 Meter No Rupees Only 0.00

5 Supply power cable of 11 KV grade of 120 sq.mm X 3 core complete testing and commissioning XLPE insulated Aluminium conductor armoured underground HT cable. As per site requirement or directed by EIC. Make: Gloster, Havells, KEI, Polycab, Finolex. 450.00 Meter No Rupees Only 0.00

6 Supplying and fixing of 4 way (4 + 12), Double door, Vertical TPN type three pole and neutral, sheet steel, MCCB distribution board for 125/100A, 415 V MCCB, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required, concealed or on surface/recess as directed by EIC. (But without MCCB/ MCB/RCCB/Isolator) Make: LK/Siemens/Legrand/Hager/ Schneider/ABB 2 Each No Rupees Only 0.00

7 Supplying and fixing of 63A rating 240 V, 10kA, "C" curve MCB suitable for inductive load of Double pole in the existing MCB DB complete with connections, testing and commissioning ect. As required. Make: LK/Siemens/Legrand/Hager/Schneider 20 Each No Rupees Only 0.00

8 Supply and fixing of 200 watt ± 10% LED High Bay light, Pure White color, body material Pressure die-cast aluminum housing, Input 270 Volt, 26000 Im luminous Flux with compatible fitted suitable for mounting on the existing/new bracket arms with fixing attachments and fixing of lamp with the help of suitable three core 0.75 sqmm cable(supplied from contractor as per requirement) from fitting to ceiling rose/junction box, suitable arrangment and complete accessories. Make:Havells/Philips/Bajaj/Wipro/Surya 100 Each No Rupees Only 0.00

9 Wiring to one 3/6 pin socket outlet 5/16 amp on the same board with other switches and wiring with 1.5/2.5 sq.mm FRLS PVC insulated copper conductor single core cable (Havell's / KEI / Finolex/Gloster make) and 1.5/2.5 sq.mm FRLS PVC insulated copper conductor single core cable (Havell's / KEI / Finolex/Gloster make) as earth wire. Only wiring without switch/socket. 50 Each No Rupees Only 0.00

10 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of above 185 sq.mm and upto 400 sq.mm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.. As per site requirement or directed by EIC. 125.00 Meter No Rupees Only 0.00

11 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of above 185 sq.mm and upto 400 sq.mm size direct in ground the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required.. As per site requirement or directed by EIC. 850.00 Meter No Rupees Only 0.00

12 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of above 185 sq.mm and upto 400 sq.mm size in the existing RCC/HUME/METAL pipe as required.. As per site requirement or directed by EIC. 90.00 Meter No Rupees Only 0.00

13 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of above 185 sq.mm and upto 400 sq.mm size in the existing masonry open duct as required.. As per site requirement or directed by EIC. 550.00 Meter No Rupees Only 0.00

14 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of above 185 sq.mm and upto 400 sq.mm size on wall surface as required.. As per site requirement or directed by EIC. 50.00 Meter No Rupees Only 0.00

15 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of upto 35 sq.mm size (clamped with 1mm thick saddle) on cable tray as required.. As per site requirement or directed by EIC. 300.00 Meter No Rupees Only 0.00

16 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of above 185 sq.mm and upto 400 sq.mm size on cable tray as required.. As per site requirement or directed by EIC. 1,000.00 Meter No Rupees Only 0.00

17 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of upto 120 sq. mm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.. As per site requirement or directed by EIC. 150.00 Meter No Rupees Only 0.00

18 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of upto 120 sq.mm size direct in ground the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required.. As per site requirement or directed by EIC. 150.00 Meter No Rupees Only 0.00

19 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of upto 120 sq.mm in the existing RCC/HUME/METAL pipe as required.. As per site requirement or directed by EIC. 50.00 Meter No Rupees Only 0.00

20 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of upto 120 sq.mm in the existing masonry open duct as required.. As per site requirement or directed by EIC. 100.00 Meter No Rupees Only 0.00

21 Supplying and fixing cable route marker with 10cm x 10cm x 3mm size thick G.I. plate with inscription there on, boltrd/welded to 35 mm x 35 mm x 6 mm angle iron, 60 cm long and fixing the same in ground as required. The "HT CABLE" or "LT Cable" shall be engraved/painted with red/black colour paint with yellow as background colour on both side of cable route marker plate. 100mm grade cement concrete 1:2:4 all around the cable route marker as directed by E-I-C. 100 Nos No Rupees Only 0.00

22 Supply and installing Hot Dipped Galvanised Iron cable tray size: 300 mm width X 62.5 mm depth X 2.0 mm thickness (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient section, joined with connectors, suspended from the celling with G.I. suspenders including G.I. bolts, nuts & angle base support etc. as required. As per site requirement or directed by EIC. 300.00 Meter No Rupees Only 0.00

23 Supply and installing Hot Dipped Galvanised Iron cable tray size: 450 mm width X 62.5 mm depth X 2.0 mm thickness (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient section, joined with connectors, suspended from the celling with G.I. suspenders including G.I. bolts, nuts & angle base support etc. as required. As per site requirement or directed by EIC. 100.00 Meter No Rupees Only 0.00

24 Supply and installing Hot Dipped Galvanised Iron cable tray "bends" size: 300 mm width X 62.5 mm depth X 2.0 mm thickness (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient section, joined with connectors, suspended from the celling with G.I. suspenders including G.I. bolts, nuts & angle base support etc. as required. As per site requirement or directed by EIC. 5 Each No Rupees Only 0.00

25 Supply and installing Hot Dipped Galvanised Iron cable tray "bends" size: 450 mm width X 62.5 mm depth X 2.0 mm thickness (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient section, joined with connectors, suspended from the celling with G.I. suspenders including G.I. bolts, nuts & angle base support etc. as required. As per site requirement or directed by EIC. 5 Each No Rupees Only 0.00

26 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal / coke and salt as required. 20 Set No Rupees Only 0.00

27 Supply and laying 25 mm X 5 mm G.I. strip at 0.50 meter below ground as strip earth electrode, including connection / terminating with G.I. nut bolt, spring washer etc. as required (jointing shall be done by overlapping and with 2 set of G.I. nut bolt & spring washer spaced at 50mm). 60.00 Meter No Rupees Only 0.00

28 Providing & fixing testing joint, made of 20mmX3mm thick G.I. strip, 125 mm long with 4 nos. of G.I. bolts, nuts, Chuck nuts and spring washers etc. complete as per site requirement as directed by Engineer in-charge. 10 Each No Rupees Only 0.00

29 Supplying and making end termination with brass compression gland and aluminium lugs size 35 sq.mm X 3½ core PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required as per site requirement and as directed by Engineer in-charge. Lugs and Gland Make: Dowels, action,Jainson. 8 Each No Rupees Only 0.00

30 Supplying and making end termination with brass compression gland and aluminium lugs size 240 sq.mm X 3½ core PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required as per site requirement and as directed by Engineer in-charge. Lugs and Gland Make: Dowels, action, Jainson. 10 Each No Rupees Only 0.00

31 Supplying and making end termination with brass compression gland and aluminium lugs size 400 sq.mm X 3½ core PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required as per site requirement and as directed by Engineer in-charge. Lugs and Gland Make: Dowels, action, Jainson. 24 Each No Rupees Only 0.00

32 Supplying and making straight through joint with heat shrinkable kit including ferrles and other ointing materials for size 3½ X400 sq. mm PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required as per site requirement and as directed by Engineer in-charge. Make: 3M, Global Power, Raychem 2 Each No Rupees Only 0.00

33 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor Size 70 sq.mm X 3 core cable of 11 KV grade as required as per site requirement and as directed by Engineer in-charge. Make: 3M, Global Power, Raychem 1 Each No Rupees Only 0.00

34 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor Size 120 sq.mm X 3 core cable of 11 KV grade as required as per site requirement and as directed by Engineer in-charge. Make: 3M, Global Power, Raychem 8 Each No Rupees Only 0.00

35 PCC concreting 1:2:4 (1 cement :2 coarse send (zone -lll) derived from natural source : 4 graded stone aggregate 20 mm nominal size derived from natural source) as per site requirement and as directed by Engineer in-charge. 20.00 CM No Rupees Only 0.00

36 Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 size 100 mm including welding, fitting, like elbow, tees flanges, tapers, nuts, bolts, gasket etc. and fixing the pipe with suitable clamp / support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. Make: Jindal, Tata, SAIL 20.00 Meter No Rupees Only 0.00

37 Demolishing cement concrete nominal cencrete 1:3:6 or richer mix (including equivalent disgin mix) manually/ by mechenical means including dispoble of material within 50 meters lead as per direction of Engineer-In-Charge. 35.00 CM No Rupees Only 0.00

38 Demolishing brick work in mud mortar manually/ by mechenical means including stacking of serviceable material and dispoble of unserviceable material within 50 meters lead as per direction of Engineer-In-Charge. 20.00 CM No Rupees Only 0.00

39 Wiring for light point / fan point/exhaust fan point /call bell point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable (Make: Havell's / KEI / Finolex/Gloster) in surface / recessed medium class PVC conduit with piano type switch , phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required with necessary inter connections, chipping the wall & replastering cement 1:3 to smooth finish complete in all respects as per site requirement and as directed by Engineer in-charge.(Switch and Socket Make: Havell's /Achor/ ABB/Legrand/Cona) 30 Point No Rupees Only 0.00

40 Supplying and drawing 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. (Havell's / KEI/Finolex/Gloster/Polycab make) 250.00 Metre No Rupees Only 0.00

41 Supplying and drawing 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel/ PVC conduit as required. (Havell's / KEI / Finolex/Gloster/Polycab make) 400.00 Metre No Rupees Only 0.00

42 Supplying and drawing 2 X 4.0 sq. mm + 1 X 4.0 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel/ PVC conduit as required. (Havell's / KEI / Finolex/Gloster/Polycab make) 200.00 Metre No Rupees Only 0.00

43 Supplying and fixing of 25mm medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required (Make: Plaza/AKG/Finolex) 100.00 Metre No Rupees Only 0.00

44 Supplying and fixing 5/6 A switch piano type on the existing switch box/cover including connections etc. as required. (Switch and Socket Make: Havell's /Achor/ ABB/Legrand/Cona) 50 Each No Rupees Only 0.00

45 Supplying and fixing 3 pin 5/6 A socket outlet on the existing switch box/cover including connections etc. as required. (Switch and Socket Make: Havell's /Achor/ ABB/Legrand/Cona) 50 Each No Rupees Only 0.00

46 Supplying and fixing telephone socket outlet on the existing switch box/cover including connections etc. as required. (Switch and Socket Make: Havell's /Achor/ ABB/Legrand/Cona) 6 Each No Rupees Only 0.00

47 Supplying and fixing 3 pin, 5A ceiling rose on the existing junction box/ wooden block including connections etc. as required. (Switch and Socket Make: Havell's /Achor/ ABB/Legrand/Cona) 6 Each No Rupees Only 0.00

48 Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 amps & 15/16 amps socket outlet and 15/16 amps piano type switch, connections, painting etc. as required & replastering cement 1:3 to smooth finish complete in all respects as per site requirement and as directed by Engineer in-charge. (Switch and Socket Make: Havell's /Achor/ ABB/Legrand/Cona) 20 Each No Rupees Only 0.00

49 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25A modular SP MCB, "C" curve including connections, painting etc. as required. Make: Havell's/C&S/Legrand 6 Each No Rupees Only 0.00

50 Providing and fixing of 100A 4P 415V MCCB, 30KA breaking capacity with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. Make: L&T/Siemens/Legrand/Hager/Schneider 2 Each No Rupees Only 0.00

51 Supplying and fixing of 8 way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator) Make: L&T/Siemens/Legrand/Hager/Schneider 20 Each No Rupees Only 0.00

52 Supplying and fixing of 5A to 32A rating 240 V, 10kA, "C" curve MCB suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning ect. As required. Make: L&T/Siemens/Legrand/Hager /Schneider 144 Each No Rupees Only 0.00

Total Amount Excluding GST 0.00

Add 18% GST 0.00

Total Amount Including GST 0.00

Total Amount inclusive of GST In Words No Rupees Only

HINDUSTAN AERONAUTICS LIMITED

TRANSPORT AIRCRAFT DIVISION, KANPUR

Pre-Qualification Profile (To Be uploaded along with Part A)

Tender Ref No. or Contract No.: MW/ELE/383/1

Name of Work: Electrical renovation and power distribution work in Compressor House, Sheet Metal Shop and LTA Sub-Station including allied work at HAL Factory.

Estimated Amount in Rs.: 7989015.44

Tender Notice Date: [DD/MM/YYYY] 04-03-25

Sl.No Description Details Enclosed / Not Enclosed Remarks

1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual /firm /company

2 Type of ownership PleaseEnter Type of Ownership

If Other, please specify

3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc., Please enter Details of Constitution

4 Address for correspondence: Please Enter Address

5 Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Cancelled cheque leaf to be uploaded)

Name of the Bank

Type of Account

6 PAN No.: Please Enter Pan NO

7 Average annual financial turn over during the last 3 years, ending 31st March of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3

YEAR TURN OVER IN Rs: Enclosed / Not Enclosed REMARKS 5000000 2

2023 – 2024 Rs: Please Enter Turn over in Rupees for all the 3 years 7499999 2

Average annual Financial turn over 0.00 2396704.63

Avg Annual Turnover criteria is not met 10000000 1

8 Details of Registered Contractor

If Registered Contractor with HAL Yes/ No [for Similar nature of work] Documentary proof to be Uploaded to e-Procurement Portal * Category: E = 75.00 Lakhs upto ` 100 Lakhs F = 50.00 Lakhs upto ` 75 Lakhs G = 25.00 Lakhs upto ` 50 Lakhs H =10.00 Lakhs upto ` 25 Lakhs I = 5.00 Lakhs upto ` 10 Lakhs J = 2.00 Lakhs upto ` 5 Lakhs K = Below ` 2 Lakhs 0 7 E 1

Registration No. 199999 7 F 2

Category 200000 6 G 3

PEMD Amount ( If paid ) 499999 6 H 4

9 PF No.: Please Enter PF NO

10 ESI No.: Please Enter ESI NO

Location of Agency/organisation: Please Enter GST Details

Any Special Status of the Unit i.e. DTA, EOU, SEZ, FTWZ

Service Accounting Code (SAC) #N/A #REF!

Registered under regular scheme or Composition Scheme or Not Registered Related Document to be uploaded in ePortal

12 Contact details

Contact person name Please Enter Contact person Name

Mobile No. Please Enter Mobile No

Ph. No. with STD code

FAX No. with STD code #N/A #REF!

13 Valid Electrical contractor licence of appropriate voltage issued by any state Govt. under clause 45 of Indian Electricity Rules 1956 and as amended from time to time or to declare engage an electrical contractor who has the above mentioned licence and requisite experience. Please SELECT YES OR NO

14 I.T Returns for past 03 years 999999 5 J 6

Assessment year 2024-25 Please Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7

Assessment year 2023-24 2499999 4

Assessment year 2022-23 2500000 3

15 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued within a period 12 months from the final date of submission of tender. solvency cal

Name of Bank & Branch: Please Enter Details to 'Name of the Bank' , 'Date of Issue','Value in C89``Rs. in Lakhs 04-03-25 28-Jun 0 40000

Date of Issue[MM/DD/YYYY]: 200000 40000

Value of Rs. In Rupees: 200001 150000

Solvency value is NOT as per NIT

16 Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated amount put to tender. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated amount put to tender. (iii) ONE similar completed work costing not less than the amount equal to 80% of the estimated amount put to tender. 3195606.176 500001 250000

Completed similar works during last 7 years Please Select %of similar works completed during last 7 years 1000000 250000

Work No I Type of Work: [Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000

Brief Description of Work: 2000000 500000

Completed value of Work in Rs. Lakhs: 2000001 1000000

Date of Commencement of Work [DD/MM/YYYY] 4000000 1000000

Date of Actual Completion of Work[DD/MM/YYYY]: 4000001 2000000

Work No II Type of Work: [Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000

Brief Description of Work: Please Enter Details for Work No II

Completed value of Work in Rs. Lakhs:

Date of Commencement of Work[DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]: work done

Work No III Type of Work: [Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 04-03-25 2555

Brief Description of Work: Please Enter Details for Work No III 04-05-18

Completed value of Work in Rs. Lakhs:

Date of Commencement of Work[DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

17 Details of person holding the power of Attorney :

Name Related Document to be Uploaded to eProcurement Portal

Mobile No. Please Enter Details for Person holding Power of Attorney

Ph. No. with STD code

FAX No. with STD code

18 DECLARATION I

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under Pre-qualification criteria, technical bid ( Page 1 to 104) and price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and award of work. Please Accept the Declaration I

19 DECLARATION II

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I//We are aware that document sought only be uploaded for evaluation of offer. 5.I/We shall not associate nor has been associated in the past, directly or indirectly with consultant or any other entity that would prepare the design, specification and other documents of the project. Please Accept the Declaration II