Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.1 LAccepted-AOC R O NAUSHERA DISTT RAJOURI J K 185151 | NAUSHERA | RAJOURI | JAMMU AND KASHMIR | 185151 | L1 | Accepted-AOC Being L1 bidder | |
| 2 | L2₹34.5 L+₹1.4 L (4.27%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 bidder | |
| 3 | L3₹35.3 L+₹2.2 L (6.73%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 bidder | |
| 4 | L4₹36.4 L+₹3.3 L (10.1%)Rejected-Finance | L4 | Rejected-Finance Being other than L1 bidder | |
| 5 | L5₹37.7 L+₹4.6 L (13.9%)Rejected-Finance | L5 | Rejected-Finance Being other than L1 bidder |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
24 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 862 EWS
GE 862 EWS Rajouri
COMPREHENSIVE REPAIR TO CERTAIN BLDGS IN SOUTH ZONE UNDER AGE BR DETT-A OF GE 862 EWS
2024_MES_655928_1
GER-32/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS Rajouri
Please refer tender documents
9 documents required · 9 mandatory
₹500
GE 862 EWS
₹99,800
Yes
31 Aug 2024
25 May 2024
26 Jun 2024
25 May 2024
24 Jun 2024
10 Jun 2024
27 May 2024 - 6 Jun 2024
Amount
Taking down chowkhats or frames (without taking off shutters from the frames) n.exc 1.5 Sqm each and removing from site and making good to the disturbed area accordance to existing surface, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 Sqm and not exceeding 4.0 Sqm each removing form site, complete all as specified and directed.
Taking down shutters of any description area n exc 1 sqm each and removing, complete all as specified and directed.
Taking down shutters of any description area exc 1 sqm and n.exc 2 sqm each and removing, complete all as specified and directed.
Taking down shutters of any description area exc 2 sqm each and removing, complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness below or above the ground level and removing debris outside MoD land, complete all as specified and directed.
Taking down cement plaster, any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors after taking down old existing GI tubing, complete all as specifed and directed.
M&L for 20 mm bore galvanized iron GI tubing medium grade with all fittings such as bends, socket, tee, elbow, union, nipple, short pieces and fixed to walls, ceilings or laid in floors after taking down old existing GI tubing, complete all as specifed and directed.
Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work complete all as specified and directed.
M&L for plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in apex stone, coping, benching, hold fasts, water troughs, bed block and the like including weathering, slightly rounded or chamfered angles and throating,complete all as specified and directed.
M&L for mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks or portion framed and hung as gates, including pintel hinges, stops, hand made sliding bolt etc and similar work conforming to Fe 290 or E-165 work including welded fabricks frames, gate and framed truss etc, complete all as specified and directed.
M&L for steel ventilators with top hung shutters openable type including hinges and handle with steel peg stay complete without glazing bars, dovetailed or welded, complete all as specified and directed.
S&F for factory made MS tubular Box type window (double rebate and double shutter) of MS rolled steel section conforming to IS-1038 and shall be ISI marked manufactured by ISI approved manufacturer, openable frames shall be fabricated of sections as approved by Engr-in-Charge, corner welded to form a solid fused welded joint, handles shall be of Z section welded with openable frame box steel section used in outer frame, shutter frame and central frame shall be ERW secton of 16 gauge with fixing lugs to be fixed as per provision of IS-1038 except that top lugs shall not be provided , all shutters of windows shall be provided with 4 Nos friction free hinges, 2 Nos 75 mm tower bolts to each leaf of window one at top and one at bottom welded on 3 mm thick steel sheet piece of suitable size which shall be in turn welded to Z section of steel window to provide suitable arrangement of using tower bolt. Glazed, gauzed window , mild steel casement stays 300 mm with hinged joint and two plates with studs complete all as specified with all fittings and fixtures without glazing bars including 3mm thick sheet glass ordinary quality and GI wire mesh of 0.56mm nominal dia and average width of aperture 1.18 mm etc, complete all as specified and directed.
S&F for 1.25mm pressed steel door frame of size 125x60 mm with one or more rebates incl necessary fixing lugs, hinges, lock and strike plate etc including back filling to chowkhats in PCC 1:3:6 type C-0 using 12.5mm graded crushed stone agregate complete all as specified and directed.
S&F for pressed steel door frame of size 105x60 mm with one or more rebates including necessary fixing lugs, hinges, lock and strike plate etc including back filling to chowkhats in PCC 1:3:6 type C-0 using 12.5mm graded stone agregate, complete all as specified and directed.
S&F for flush shutter sold core construction with block board core and plywood face panels, commercial type on both sides 30mm thick and covered on both sides with decorative face veneer with lapping / frame to match, complete all as specified and directed.
S&F for factory made 2nd class hard wood 35 mm thick plain framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F for factory made 35 mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.
M&L for 300mm MS ordinary rat tail rod pattern door springs (ISI marked) of approved make including roller and roller plate, complete all as specified and directed.
S&F for aluminium anodized barrel tower bolts 150 mm long of extruded section (ISI marked) ,complete all as specified and directed.
S&F for extruded aluminium alloy handles size 150 mm fabricated type anodised (ISI marked), complete all as specified and directed.
S&F for 100mm long butt hinges medium weight cold rolled mild steel (ISI Marked) , complete all as specified and directed.
S&F for 250 mm long mild steel sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate (ISI Marked) , complete all as specified and directed.
S& F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperature 1.40mm and fixed with tinned tacks, or stainless steel wire staples , complete all as specified and directed.
S&F for 3 mm thick figured glass pin headed type and glazing with oil putty in squares n . exc 0.50 sqm in each pane complete after hacking out old broken glass all as specified and directed.
S&F for 4mm thick designer ceiling board in ceiling fixed with screw as per manufacturers instructions, laid over and including hot dipped galvanised iron in post grid with 24mm wide T section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33 mm thick galvanised steel sheet of size 24 x 32 x 300 mm spaced at 1200 mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4 mm dia to be fixed by approved rawl plug or hanged with existing truss members. The last hanger at the end of each main runner shall not be greater than 450 mm from adjacent wall flush fittings of 1200 mm long screws Tee with (double stiching) to interlocked between main runners at 600 mm centre to centre from 1200 x 600 mm modules cross tee longer than 600 mm modules to be formed by fittings 600 mm long cross tee, tee perimeter wall angle shall be of 0.45 mm thick galvanised steel of size 19 x 19 mm and 300 mm long of white colour all as per insturctions including dismantling of existing board etc, complete all as specified and directed.
S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square, complete all as specified and shown on drwaing in SSR Part-II (2020) directed.
S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & shown in drawing mentioned in SSR Part-II 2020, complete all as specified and directed.
Taking down of aluminium doors / window / partition of (frame and shutters) of any description including all fittings , complete all as specified and directed.
S&F for Powder coated aluminium frame (minimum thickness of powder coating not less than 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.
S&F for powder coated aluminium door shutters (minimum thickness of powder coating not less than 50 micron), aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges 03 Nos, mortice lock- 1 No, floor door stopper 01 No, anodised aluminium snap beading, screws etc, complete all as specified and directed.
S&F for powder coated aluminium window and ventilator shutters (minimum thickness of powder coating not less than 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 nos), suitable handle (1 no), complete all as specified and directed
S&F for powder coated aluminium window and ventilator shutters (minimum thickness of powder coating not less than 50 micron), fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified and directed.
S&F for sheet glass 5.5 mm thick, ordinary quality and fixed with aluminum & rubber beading in square exc 0.5 sqm in each pane, complete all as specified and directed.
M&L for 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.
S&F in repair for door closer hydraulically regulated, aluminium (extruded section body) designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg., Complete all as specified and directed.
S&F in repair for 100 mm size mortice lock of brass, vertical type, 4 levers fixed to aluminium doors, complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in sub base, sub floors, surface finished even and rough, complete all as specified and directed.
M&L for 50mm thick plain cement concrete, type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection, laid in slope 1:12 from outer edge of the wall, finished even and fair, laid in alternate bays including providing 6mm wide joints throughtout thickness of plinth protection in concrete bays and in between walling and plinth protection, joints filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight), complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.16 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, after dismantling old unserviceable of tiles, complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 10 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.11 sqm but n.exc 0.16 sqm on vertical surfaces such as skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick backing layer of cement plaster in cement mortar 1:4, after dismantling old unserviceable of tiles complete all as specified and as directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar 1:4, after dismantling old unserviceable of tiles, complete all as specified and as directed.
M&L for glazed ceramic coloured tiles of size 300 x 450 x 7mm thick, (premium quality) on vertical surface of wall such as dado, skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:4, after dismantling old unserviceable of tiles, complete all as specified and as directed.
M&L for double charged vitrified tiles dark shade (premium quality) 10 mm thick (square/ rectangular), area of each tiles exc 0.36 sqm but not exc 0.42 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface, laid over and including 15 mm thick screed bed in cement mortar 1:4 after dismantling old unserviceable of tiles, complete all as specified and directed.
M&L for double charged vitrified tiles dark shade (premium quality) 10 mm thick (square/ rectangular) as in skirting / dado, area of each tiles exc 0.36 sqm but not exc 0.42 Sqm etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10mm thick rendering in cement mortar 1:4, after dismantling old unserviceable of tiles, complete all as specified and as directed.
M&L for vitrified tiles (light shade) of size 600x 600x 10mm thick (premium quality) as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick cement plaster in cement mortar 1:4 after dismantling old unserviceable of tiles, complete all as specified and as directed.
M&L for vitrified tiles (light shade) of size 600x 600x 10mm thick (premium quality) as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing layer of cement plaster in cement mortar 1:3 after dismantling old unserviceable of tiles, complete all as specified and as directed.
S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 500 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 20mm bore ball brass valve with union screwed for iron pipe and fixed after dismantling of old unserviceable tank, complete all as specifed and directed.
S&F for rotational moulded polythylene water storage tank (ISI marked) with float valve, plastic lid cover, multy-layered, cylindrical vertical with closed top, hoisted and fixed in position of capacity 1000 ltrs tank and making connections inlcuding suitable GI wash out, over flow, nipple and including 20mm bore ball brass valve with union screwed for iron pipe and fixed after dismantling of old unserviceable tank, complete all as specifed and directed.
S&F in repair for grating doom 100 mm of PTMT (Min Weight 40 Gms) with waste hole, complete all as specifed and directed.
S&F in repair for brass chromium plated shower rose 125mm with or without swivel joints, any size inlcuding fixing to steel pipe or union, complete all as specified and directed.
S&F in repair for brass chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flange, aluminium anodised, complete all as specifed and directed.
S&F in repair for 15mm bore bib tap cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair for 15mm bib tap standard of PTMT of any colour high pressure screwed for iron pipe and fixed, complete all as specified and directed.
S&F in repair for 15mm bore, pillar cock, cast copper alloy, with capstan heads, chromium plated, fancy type, screwd down high pressure , with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.
S&F in repair for 15mm bore Angle valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
S&F in repair for 15mm bore Stop valve (concealed type), cast copper alloy screwed down, high pressure with crutch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
S&F repair for PVC connection 15 mm x 450 mm including PTMT nuts at both ends screwed for iron pipe of 15 mm bore, complete all as specified and directed.
S&F in repair for vitreous China water closet (squatting pan) Orrisa pattern 580x440 mm size pan, white, with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe (excluding flushing cistern), complete all as specified and directed.
S&F in repair for 10 ltrs capacity (PVC), valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed.
M&L for reinforcement cement concrete (nominal mix) 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like after demolition of old reinforced cement concrete of any descripltion and in any position including removing debris of the premises, complete all as specified and directed
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
S&F in repair for brass chromium plated nozzle jet sutiable for EWC with all fixing arrangement complete all as specified and directed.
S&F for Brass chromium plated Health faucet (ABS Body) for EWC suitable for 15mm dia pipe with 1.25m long flexible tube at ABS wall hook with all fittings complete as in repair all as specified and directed.
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles, complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4, complete all as specified and directed.
Description all as per srl item No. 68 above but except bricks Note:- Old brick retrieved from demolition shall be used.
M&L for stone walling of random rubble masonry, uncoursed, well bonded, bedded and soilidly hearted, built in cement mortar 1:6, complete all as specified and directed.
Description all as per srl item No. 70 above but except stone. Note: Old stone retrieved from demolition shall be used.
M&L for rendering 15 mm thick in cement mortar 1:6 on brick masonry surface or stone masonry work, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on stone masonry surface or brick masonry surface, finished even and smooth without using extra cement, complete all as specified directed.
M&L for rendering 15 mm thick in cement mortar 1:3 on concrete surface of soffits of slabs, chajja, roof projection etc, finished surface even and smooth without using extra cement, complete all as specifed and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of white wash, complete all as specified and directed.
M&L for preparation of new plastered surfaces of roof projection, chajja and applying two coats of cement base paint over a coat of white wash, complete all as specified and directed.
M&L for preparation of new plastered surfaces of ceiling and applying two coats of distemper oil emulsion, complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over 3mm thick wall care putty, complete all as specified and directed.
M&L for preparation of old decorative plastered surfaces on walls and applying two coats of white wash , complete all as specified and directed.
M&L for preparation of old decorated brick / concrete plastered / un-plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of cement base paint on walls, pillars, cornices etc, complete all as specified and directed.
M&L for preparation of old decorated brick / concrete plastered/un-plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of oil emulsion distemper, complete all as specified and directed.
M&L for preparation of old painted steel surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
M&L for preparation of new steel surfaces of any description exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
S&F in repair for vitreous China bowl urinal flat back of size 465x355x265 mm white (minimum), with grating and union for discharge pipe excluding flushing cistern and incluidng flush type and waste pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement, complete all as specified and directed.
M&L for complete removal of existing treatment of wall surface and applying two coat of distemper oil emulsion paint over a coat of 1.5mm thick wall care putty after preparation of surface, complete all as speicied and directed.
M&L for complete removal of existing treatment of walls and applying two coats of cement base paint after preparation of surface, complete all as specified and directed.
S&F in repair for vitreous China wash basin (pedestal), white, flat back, size 550x 400mm including CP waste coupling 32mm dia and PVC waste pipe 900mm long including fixing of pedestal and brackets, complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nanital or similar pattern roof coverings, complete all as specified and directed.
Dismantling of AC sheet (corrugated, semi corrugated etc), any gauge, thickness, in roof coverings, complete all as specified and directed.
S&F second class hard wood clean sawn in timber scantling framed and fixed in position complete all as specified and directed.
S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc. conforming to Gde Fe-290 E-165, complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in roof covering/ cladding to wall fixed with self tapping screws including side and end lap as per manufacturer’s instructions, complete all as specified and directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of approved colour having tensile strength 550 MPa as in ridges, hips, valley gutters fixed with self tapping screws including side and end lap as per manufacturer’s instructions, complete all as specified and directed.
M&L for Machine cut kota stone slab(mirror polished) flooring 20-25mm thick in floors and jointed with grey cement slurry mixed with pigment to match the shade of the slab including machine cutting to make it square or rectangular, rubbing and cutting and polishing to achieve mirror finish, laid over and including screed bed or bedding layer of 20 mm thick in cement mortar 1:4 of any size after dismantling old unserviceable of kota stone, complete all as specified and directed.
S&F in repair for drapery rod (Curtain rod) of wooden finishes of 25mm dia fency type complete and hanging hooks/brackets/end caps of length 1.5 mtr to 1.8 each, complete all as specifed and directed.
S&F in repair for viterous china wash down water closet pan, white (pedestal pattern), including plastic water closet seat, black/white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device, (excluding fixing bolts, flushing cistern and flush pipe) and inlcuding set of CP jet with PVC pipe of superior quality including connection to GI pipe line, complete all as specified and directed.
S&F in repair for viterous China water closet pedestal pattern in one piece type of dimention 73cmX36cm74cm including seat cover and gaset, floor mounted, 'P' or 'S' trap, flushing kit, and all necessary fixing arrangements (excluding fixing bolts and flushing cistern and flush pipe), complete all as specified and as directed.
S&F in repair for toilet paper holder of brass chromium plated fixed to wall with chromium plated screws, complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) bend any radius, complete all as specifed and directed by Engr-in-Charge.
S&F in repair 75 mm bore PVC (SWR) bend any radius, complete all as specifed and directed by Engr-in-Charge.
S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints , laid in trenchs or in floor of dia of bore 110 mm type 'B' complete after dismantling of old unserviceble PVC pipe all as specified and directed.
S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints , laid in trenchs or in floor of dia of bore 75 mm type 'B' complete after dismantling of old unserviceble PVC pipe all as specified and directed.
S&F for 75mm dia PVC (SWR) vent cowl, complete all as specified and directed.
S&F for 110mm dia PVC (SWR) reducer complete all as specified and directed.
S&F in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement and connecting to waste pipe, complete all as specifed and directed.
S&F in repair for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long including chromium plated brass screws and wooden / plastic cleats, complete all as specified and directed.
M&L for plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregates as in sub base, foundation, filling and mass, concrete complete all as specified and directed.
M&L in repair for 18mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.
M&L for 2nd class hard wood well seasoned plain solid straight chowkhat framed wrought framed, rebated on the solid, round or chamfered put together with glue and pinned at joint and fixed in well, complete all as specified and directed.
M&L for overhead PVC tanks of 500 ltr and setting aside or lowering if required for repairs, cleaning, etc and hoisting if required reconnecting and re- fixing in position after cleaning and removing all scale and dirt etc from tank and from mouths of circulating pipes including replacement of required fittings such as PVC ball valve with brass rod, tank nipple etc, complete all as specified and directed.
M&L for overhead PVC tanks of 1000 ltr and setting aside or lowering if required for repairs, cleaning, etc and hoisting if required reconnecting and re- fixing in position after cleaning and removing all scale and dirt etc from tank and from mouths of circulating pipes including replacement of required fittings such as PVC ball valve with brass rod, tank nipple etc, complete all as specified and directed.
S&F for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC/wooden frame as per specification and drawing complete after dismantling of old unserviceble existing PVC panelling, complete all as specified and directed.
S&F for 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed by Engr-in-Charge.
S&F in repair for 32mm dia, 900mm long PVC waste pipe for WHB and urinals, complete all as specified and directed.
S&F in repair for 15mm bore brass chromium plated sink mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.
M&L for granite of any type work (table rubbed and polished) 20mm thick as in steps, jambs, pillars, window - cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including grinding and polishing including 15mm screed bed in CM 1:4 after dismantling of existing granite, complete all as specified and directed.
M&L for granite of any type work (table rubbed and polished) 20mm thick as in skirting / dado in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including grinding and polishing including 10mm backing coat in CM 1:3 after dismantling of existing granite, complete all as specified and directed.
M&L for easing and adjusting aluminium door and window including refixing beading after replacement of defective portion such as door closer, aluminium handles, hinges, locks, new rubber gasket, aluminium beading prelaminated particles board, sheet glass etc, complete all as specified and directed.
Refing of shutter of any description and size after necessary repair, complete all as specified and directed.
M/S SURINDER PAL
CHAND CONSTRUCTION CO
M/S Narinder Pal Choudhary
M/S Darshan Kumar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .