PROVN OF TOILET BLOCK FOR JASRAJ SECURITY POST AND RECEPTION COUNTER FOR TCP OF NCO ACADEMY AT DHANA MIL STN.

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out Hard/dence soil, complete all as specified and directed.

Material & Labour for PCC 1:4:8 type D-2 (with using 40mm graded stone aggregate) in foundation filling and mass concrete, complete all as specified and directed

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.

Returning, filling in trenches including spreading, levelling, watering and well ramming in layer n. exc 25 mm all as specified and directed by Engineer-in-Charge.

Supply & Fix 10mm dia TMT bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Supply & Fix 6mm to 8mm,dia TMT bar cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Supply & Fix 5mm and over upto and including 10mm dia TMT bar in stirrups spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces., complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surface complete all as specified and directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges fair finished surface complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surface complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surface complete all as specified and directed.

Material & Labour for RCC M25 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

Material & Labour for RCC M-25 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material & Labour for RCC M25 as in chajjas complete all as specified and directed.

Material & Labour for RCC M25 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.

Material & Labour for RCC M25 as in Columns, pillars, piers, posts and struts complete all as specified and directed.

Material & Labour for cement concrete Type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed.

Material & Labour for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement Mortar 1:6, complete all as specified and directed.

Material & Labour for brick work with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 all as specified and directed by Engg-In-Charge.

Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 for finished even and smooth (without using extra cement), complete all as specified and directed.

Material & Labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces using integral water proofing compound 3% by weight of cement and finishing the surface even and smooth without using extra cement complete all as directed and directed. Note: - WPC shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified & directed.

Material & Labour for 5mm thick rendering in CM (1:3) on concrete surfaces, finished even & smooth (without using extra cement), complete all as specified and directed.

Material & Labour for preparation of new plastered surfaces of ceiling including cornices, pilasters etc and applying three coat of white wash complete all as specified and directed.

Material & Labour for two coats of Oil bound distemper including preparation of newly plastered wall surface over 1.50 mm thick wall care putty etc complete all as specified and directed.

Material & Labour for preparing new plaster surfaces walls including chajjas, facias etc. and applying two coat of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

Supply & Fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing. The door frame shall be tied to the wall using 75/100mm long MS screw complete all as specified and directed.

Supply & Fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed.

Supply & Fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates, aluminium grill including jointing cleat for fixing etc. complete all as specified and directed. Note :- Minimum thickness of powder coating 50 micron.

Supply & Fix aluminium anodised powder coated window and ventilator shutters side hung type or sliding type or fixed type with or without sash bars of aluminium section weighing minimum 0.55 kg/mtr including necessary jointing cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws including powder coated anodised aluminium fittings such as peg stay 150mm long (1 no), hinge type B-21 100mm long (2 nos) suitable handle (2 no) tower bolt (2 nos)

Supply & Fix aluminium anodised powder coated door shutters of, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium anodised powder coated fitting such as handles 2 Nos, 100 mm hinge 3 Nos, 200 tower bolt 2 Nos, mortice lock including keys 1 set, anodised aluminum snap beading screws etc complete all as specified and directed. Note :- Minimum thickness of powder coating 50 Micron.

Providing and fixing pre painted steel sliding window 3-Track, 2 glass panel and 1 mesh panel sliding window fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. Section for external frame should be of 107x44mm, Section for shutter should be of 35x49mm. Section of mesh should be of 35 x 49 mm. The windows should be paneled with 5mm thick plain clear glass. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine Monomer (EPDM).The sections are to be cut to length, joined and assembled by means of corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding screws. Make :- M/S Ashwani & Sons, E-15 patel nagar -II Gaziabad (UP), NCL Alltek & Seccolar Ltd & any other manufacturer approved by E-in-C Branch.

Supply & Fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Supply & Fix tinted / coloured floated glass ordinary quality & glazing with wooden/ aluminium bead/oil putty in Square n.exc 0.5 Sqm in Each panel 4.8 mm thick complete all as per specified and directed. Make:- Modiguard/ saintgobin / Hariyana glass

Supply & Fix for 100 mm butt hinges stainless steel medium weight complete all as specified and directed.

Supply & Fix 125 mm aluminium alloy handles, cast type anodised complete all as specified and directed.

Supply & Fix 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

Supply & Fix 300 mm aluminium alloy sliding door bolts with hasp and staple bolt type and fixing clips of sheet cast or extruded section and fixing and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Material & Labour for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Material & Labour for 100mm thick cement concrete type D-2, 1:4:8 using 40mm graded stone aggregate in floor sub base, complete all as specified and directed.

Material & Labour for 25 mm thick cement concrete in flooring type B1, 1:2:4 (20 mm graded aggregate) screed bed below floor tile, complete all as specified and directed.

Material & Labour for non skid colour ceramic tile 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with C M 1:6, complete all as specified and directed.

Material & Labour for Non-skid ceramic colour tiles7 to 8 mm thick, (square/rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed.

Material & Labour for Glazed ceramic coloured walls tiles in vertical surfaces 300x600x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles., complete all as specified and directed.

Material & Labour for Granite (of any type) tiles 20mm thick machine cut, in, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and directed by EIC.

Supply & Fix 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply & Fix stop valves for 15 mm bore fancy type chromium plated long shank and cup concealed screwed for iron pipe or for brass ferrule, complete all as specified and directed.

Supply & Fix 15mm bore bib tap, chromium plated fancy type, screwed down, high pressure for iron pipe or for brass ferrule complete all as specified and directed.

Supply & Fix 10 ltr low level PVC valve less, syphonic action type flushing cistern, white, with ball value, float and handle including brackets all as specified and directed.

Supply & Fix soap dish vitreous china white approximate size 160 x 160 x 90 fixed to plug with chromium plated brass screw complete all as specfied and directed.

Supply & Fix brass chromium plated tubular towel rail, 20 mm dia., D Type, 45 cm long between flanges, complete all as specified and directed.

Supply & Fix vitreous china wash basin white flat back size 550x400mm including pedestal excluding taps, but including brackets etc complete all as specified and directed.

Supply & Fix 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgs/cm2 as in waster pipe for WHB and urinal waste pipe, complete all as specified and directed.

Supply & Fix PVC connection 15 mm size with CP nuts of length 450 mm long., complete all as specified and directed.

S&F 32 mm bore waster coupling of CP (half of full thread) for WHB and urinal, complete all as specified and directed.

Supply & Fix for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed.

Supply & Fix PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75mm dia, complete all as specified and directed.

Supply & Fix PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls 75 mm dia bore pipe, complete all as specified and directed.

Supply & Fix PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110mm dia, complete all as specified and directed.

Supply & Fix PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls 110 mm dia bore pipe, complete all as specified and directed.

Supply & Fix 75mm dia PVC (SWR) bends complete all as specified and directed.

Supply & Fix 110mm dia PVC (SWR) bends complete all as specified and directed.

Supply & Fix PVC 110mm bore (SWR) branch piece, double (double Y) equal or unequal, complete all as specified and directed.

Supply & Fix PVC 75mm bore (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

Supply & Fix 500 ltr rotational moulded polyethylene water storage tanks white colour triple layer (cylindrical vertical with closed top) hoisted and fixed in position with all as specified in SSR Part I, complete all as specified and directed.

Supply & Fix Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore., complete all as specified and directed.

Supply & Fix Chromium plated shower rose 125 mm size with liver arm and swivel joints including fixing to steel pipe or union complete all as specified and directed.

Supply & Fix for grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.

Supply & Fix in vitreous China squatting pan, 'Orrissa' pattern, size 580mmx440mm white, with integral foot rests (excluding flushing cistern, flush pipe and waste pipe) and ‘P’ or ‘S’ trap front or back inlet including concrete bedding, complete all as specified and directed.

Supply & Fix 100mm PVC vent cowl, complete all as specified and directed.

Supply & Fix for pillar cock, chromium plated, fancy type for iron pipe or for brass ferrule of 15mm bore dia complete all as specified and directed.

Supply & Fix Vitreous China urinal half stall type white (excluding Flushing cistern, flush pipe and waste pipe) including connection to flushing pipe and outgoing pipe complete all as specified and directed.

Supply & Fix push valves (urinal) for 15 mm bore fancy type chromium plated long shank and cup concealed screwed for iron pipe or for brass ferrule, complete all as specified and directed.

Supply & Fix 18 to 20mm thick machine cut granite urinal partition of size 0.45 x 1.20 including rounding of edges, embedded in wall complete all as specified and directed.

Material & Labour for 75mm thick cement concrete (1:3:6) type C-2 using 40mm graded stone agg finished even & smooth without using extra cement as in plinth protection including forming joint to full depth at every 3.0m interval and at every charge of direction and filled mixture of bitumen and sand (1:3) by weight, complete all as specified and directed.

Material & labour for screed bed 15 mm thick in cement mortar 1:4 over RCC Roof mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction all as specified. (Note:- water proofing compound shall be measured and paid separately as supply only)

Material & Labour for ponding test by filling 75 mm deep water over roof treatment by making necessary arrangement to fill the complete Roof slab at least for 72 hrs complete all as specified and directed.

Material & Labour for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and applying APP membrane HMHDPE 3 Kg plain (thickness 2.1 mm) (total weight of the finished membrane not less than 3.0 kg/ sqm ± 5 % per sqm) confirming to IS 16540: 2017 of following operation complete all as specified and directed:- (a) Applying a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25⁰C, 0.87-0.89 kg/ litre and viscosity 70-160 cps, laying over the primer coat using Butane Torch and sealing all joints, overlapping etc. as per Annex D of IS 16540: 2017. (b) Applying hot blown grade bitumen 85/25 @ 1.20 Kg/Sqm over primer. (c) Laying of polymeric water proofing membrane of weight not than 3 kg/Sqm (d) Applying a coat of hot blow grade bitumen 85/25 @ 1.20 kg/Sqm over APP membrane. (e) Applying aluminium paint in two coats @ 100gm/sqm in each coat of finished membrane surface complete all as specified and as directed.

Supply & Fix Pre-cast reinforced cement concrete manhole covers, factory made i.e. 1:2:4 type B-1, (using 20mm graded stone agg) and set in cement mortar (1:6), 50mm thick, complete all as specified and directed. Note: - Reinforcement will be measured and paid separately under respective item.

Material & Labour for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Material & Labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer, complete all as specified and directed.

INTERNAL ELECTRIFICATION:- Material & Labour for concealed point wiring complete with and including single core PVC insulated, unsheathed flexible conductor FR-LSH cables 1.5 sqmm as per IS 694: 2010, ISI marked, annealed, multistranded copper conductor drawn through & including medium mechanical stresses class PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20 mm nominal size including modular/ non modular type, all accessories/ fittings/ junction boxes/ inspection cover etc. ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistranded copper conductor FR-LSH cable as continuous earth wire connected to metallic body at one end and common earth dolly to other end including cutting chase and making good to disturbed surfaces of wall with cement mortar 1:3 including necessary plaster and pointing in cement mortar 1:3 with white wash/distemper/other paintings complete for:- (Note:- Cost of cutting chase and making good shall be included in the quoted rate.) Make:- Havells/Finolex/Polycab (a) One light point controlled by one, one way, SP, 5 Amps switch.

(b) One fan point controlled by one, one way, SP, 5 Amps switch.

(c)One socket outlet 5 pin, 5 Amps on the same board.

(d) One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

Supply & Fix switch piano type, flush button single pole, one way 5 amps complete all as specified and directed.

Supply & Fix socket outlet 5 amps, 5 Pin, flush type complete all as specified and directed.

Supply & Fix ceiling rose, 3phase/PVC/Polycarbonate, isolated body, 3 pin surface, white /any shade, three terminals. Make :- Anchor/Leader/SSK

Supply & Fix MCB distribution board steel sheet, enclosures power coated fitted with bus bar, neutral link, earth bar din rail conforms IS-8822:96 and EIC 898-96,240 volts double door complete all as specified and directed for following MCBs:- (a) SPN 4 way, 200 amps rated bus bar.

(b) SPN 8 way, 200 amps rated bus bar.

Supply & Fix of MCB in DB's/ Isolator of the following rating complete all as specified and directed. (a) MCB SPN 40 Amps, curve 'C' breaking capacity 10 kA.

(b) MCB SP 6-32 Amps, curve 'C' breaking capacity 10kA

Supply & Fix LED tube light fitting (separate box fitting and LED rod) acrylic linear tube (1x 18 watt), 230V for single LED light fitting & rod (1 x 18W LED) bar professional CW 6500 K cover channel in box fitting, bipin holders, LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. Make:- Bajaj /Havells/ Philips

Supply & Fix LED light fitting 1x9W/1X10W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Supply & Fix New Adore LED lamps 10W, 5 star, B22 COL BALL LAMP, complete all as specified and directed. Make:- Cat part no- LHLDERUEMD8X010 of HAVELLS or equivalent and approved.

Supply & Fix Batten lamp holder, PVC/polycarbonate type with back plate suitable for batten lamp holder, complete all as specified and directed.

Supply & Fix 15 watts LED building security light fitting including suitable bracket and nut bolts etc complete all as specified and directed. Make:- Cat part No. ENDURAPEARLSL15WLED757SASYTOPCMP of Havells or equivalent in Baja/ Philips/Orient

Material & Labour for earthling complete with GI earth plate electrode 60 cm x 60 cm x 6.30 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work, PCC pit with RCC cover, charcoal salt funnel, GI wire up to 7.5 mtrs length complete all as specified and directed.

Supply & Fix single phase heavy duty Exhaust Fan of 300 mm Sweep 1400 RPM with louver Cutting of existing wall for making hole for fixing of 300 mm sweep exhaust fan including PCC / brick work complete all as specified and directed by Engr - in - Charge.

Supply & Fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated cable for working voltages of 1100 V, PVC sheathed, armoured, 2 core with nominal cross sectional area of main conductor 6 sqmm, stranded aluminium conductor, ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc. complete all as specified and as directed.

Supply and Fix Rigid non-metallic PVC conduit of 20mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.

Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 25mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., and laid in trenches/surfaces/walls complete all as specified and as directed. Make:- Tata/Jindal/Prakash Surya

Supply and fix PPR Gate Valves (Brass Insert) of 25 mm bore complete all as specified and as directed.

Material & Labour for cutting in position / existing GI pipe line 25 mm dia & insertion of new GI Tee of suitable size for making pipe connection complete all as specified and directed.

M/S JAINENDRA KUMAR JAIN

m/s mahendra kumar khare contractor

d k suppliar