Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹18,500
Closing Date
22 Mar 2021, 5:00 pmClosed
Executive Engineer PHE Mechanical Rural Division S
Executive Engineer PHE Mechanical Rural Division Srinagar
Repairs to 45HP Submersible motor at WSS Khonmoh-I
2021_PHE_120604_3
PHE/MRD/TS/e-tendering/61 of 03/2021
Open Tender
Miscellaneous Works
Item Rate
5 days
Srinagar
Please refer Tender documents.
2 documents required · 2 mandatory
₹50
Yes
Treasury Challan
Yes
23 Mar 2021
16 Mar 2021
23 Mar 2021
16 Mar 2021
22 Mar 2021
16 Mar 2021
Amount
Repairs to 45 HP submersible motor by way of decoupling of damaged 45 HP 3-phase 2900rpm submersible motor from the pump motor assembly at site. Shifting the decoupled motor from site to the workshop in a private load carrier arranged by the firm. At workshop the motor dismantled by way of opening all nuts, bolts, cover plates etc. and the damaged/burnt out windings extracted from all stator slots by special tools & tackles, skilled manpower. After extraction of the windings from the stator the same shall be rewound by using PVC insulated Cu-wire of proper gauge and specification and inserted back in the stator slots of the motor as per actual pitch and turns. The job includes insulation of the windings by proper insulating material, tape etc. and assembling back of rotor, stator, cover plates, all nuts and bolts of the motor. The repaired motor shall then be shifted back to site from workshop in a private load carrier arranged by the firm and at site the motor shall be recoupled with the pump. All power connections shall be reconnected with the motor and pump motor assembly lowered back into the bore well by refitting each of the column pipes one by one, tightening all the nuts and bolts & inserting the new flange washers in between the flanges where ever required. After complete lowering the unit shall be tested on full load. The old copper shall be retained by the firm & shall quote the rates with rebate on account of old copper scrap.
Providing, inserting & fixing/tightening of new bronze bushes in the lower and upper manifolds of the above repaired motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, skilled technical manpower, making the inner surfaces of the manifolds smooth having high precision and accuracy by machining on lathe. The job shall include casting, fabrication, machining & finishing of the new bronze bushes, before being fixed into the manifolds. The old damaged scrap of bushes shall be retained by the firm & shall quote the rates with rebate on account of old scrap.
M/S ADIL ENGINEERING WORKS
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .