REPAIR TO DRAIN, PATH, CULVERTS, RETAINING WALL, FENCING, PROTECTIVE WORK AND MISC B/R WORKS IN THE AOR OF AGE B/R-II UNDER GE (SOUTH) UDHAMPUR

Amount

Demolition and breaking up drain CI pipe/AC pipes/ PVC Pipe set in cement mortar 100 mm and below complete all as specified and as directed.

75mm bore, PVC (SWR) pipes, single or double socketed, in any length with rubber ring joints, fixed to wall, complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and as directed.

Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) as in manholes, septic tank, filter bed, walls, drains etc complete all as specified and as directed.

All as per Srl item No. 04 here-in-before but except bricks.

Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, removing all type of vegetation (like peeple tree etc) scrubbing down with water complete, all as specified and as directed.

15 mm thick rendering in on fair faces of brick /concrete on wall in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed.

Raised pointing to random or polygonal rubble, uncoursed or brought upto courses stone masonry in Cement Mortar 1:3 complete all as specified and as directed.

Preparation of newly plastered or unplastered surfaces of wall and applying two coats of cement base paint, complete all as specified and as directed.

Preparation of old plastered or unplastered surfaces of cement base paint and applying one coats of cement base paint on walls, complete all as specified and as directed.

Demolition of Reinforced Cement Concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate ) for manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4) complete all as specified and as directed.. Note:- reinforcement will be measured and paid separately.

Reinforced cement concrete (1:2:4), type B1 (using 20 mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed.

TMT mild steel bars, 10mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and includingMS wire (annealed not less than 0.9mm dia), complete all as specified and as directed.

Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for including and disposal of unserviceable material, debris and rubbish to a distance n exc 100m complete all as specified and as directed.

Plain cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregates) as in surface channels and drains, manhole complete all as specified and as directed.

Plain cement concrete type-B1(1:2:4) (using 20mm graded stone aggregate) as in benching, Haunching, coping, edging of path and similar work including necessary form work complete all as specified and directed.

75 mm thick plain cement concrete (1:4:8) type D2 (using 40mm graded crushed stone aggregate) as in foudation, filling, sub base and mass concrete complete all as specified and as directed.

Chequered cement concrete (glossy finish) tile 25cmx25cmx25mm thick or 300 mm x 300 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment and including 15mm thick screed bed cement mortar 1;6 complete all as specified and directed.

Heavy duty coloured (Dura stone) tiles n exc 0.36 Sqm of 10mm thick tiles as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor complete all as specified and directed.

Machine cut kota stone slab flooring 18-20mm thick over and incl screed bed or bedding layer 15mm thick in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab in floor including rubbing and polishing mirror finish complete, all as specified and as directed.

Glazed ceramic wall cladding tiles 300x250mmx7mm or 450x300mmx7mm on interior/exterior wall surface design and size as approved by Engr in Charge as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm cement rendering in cement mortar 1:4 complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

Mild Steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, conforming to Fe 410-W (Gde-E- 250) quality-A, complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges, complete all as specified and as direceted.

2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc, complete all as specified and as directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as direceted.

Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over and including a coat of zink chrome primer complete all as specified and as directed.

Mild steel work in roof trusses, purlins, rafters including nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc. fixed in repairs complete all as specified and as directed.

Providing precast cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregates) louvres and jallies, 35-40mm thick (measured solid), including all mouldings but excluding frame Set in cement mortar 1:4, including necessary form work, complete all as specified.

18-20mm thick granite (of any type) machine cut as in dado, shelves etc laid over cement backing coat and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grainding and polishing and taking down of old stone any type and any description complete all as specified and as directed.

1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks exc 500 but not exc 1000 Litres, and removing complete all as specified and as directed.

Machine pressed (factory made) precast plain cement concrete 1:2:4 type B-1 (20mm graded crushed stone aggregate), kerb stone & the like of size 300mm x 300mm x 100mm thick or of size as approved by GE, with plain fair faces including chamfers, weathering etc, embedding in position/laid in trenches on edges of roads, including excavation in any type of soil, setting in cement mortar (1:4) returning filling and removal of surplus soil/debris to a distance n.exc. 50m from the starting point, complete all as specified and directed.

khajuria builders

s l sharma and sons

RAMAN CONSTRUCTION CO

RAJ MOHD

M/S SUSHEEL KUMAR Govt. CONTRACTOR

MAHAJAN TRADING CO

TULSI RAINA AND SONS

RAMAN KUMAR

VIRINDER SINGH

sohtra and co

R K BUILDERS