ADDN/ALTN AND UPGRADATION OF ENTRANCE FLOORING, PATHWAY NEAR C-20, WATER DRAINAGE SYSTEM AND MISC WORKS OF BUILDING NO C-2 AND PLUMBING SYSTEM WITH MISC WORKS BUILDING NO C-2 AT VIJAY DURG UNDER GE(VD) KOLKATA

B/R PORTION Demolition of stone slabs , floor and wall tiles of any description or thickness in floors/vertical surfaces, etc laid, bedded and pointed in any mortar, etc complete all as specifed and directed by Engineer-in-charge.

Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed. (upto 04 storey High of building)

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

M&L 40 mm thick PCC 1:2:4 Type B-0 ( using 12.50 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building)

S&F in repair vitreous chine wash hand basin Table Top of size 565mm x 420mmx140mm (any selected colour) Product Range -(KUBIX) Make :Jaquar Product code no- KUS-WHT-35935.

M&L Granite (of any type) work (table rubbed and polished) in cantilever base for table top wash hand basin by cutting into wall in cement mortar (1:4) including pointng in white cement (1:2) using marble dust with admix- ture of pigment to match with shade of granite all as specified and as directed by Engineer-in-Charge

Taking down or up 15mm bore galvanised iron pipe and connection complete all as specified and as directed

S&F 15mm bore galvanised iron pipe with all fittings after cleaning fixed to wall/ceiling or laid in floors complete all as specified and as directed

S&F in repair Block boards 18 to 19 mm thick, grade 2 quality, i n t e r i o r grade, commercial type, fixed with screws to timber frame-work( as in cup board) incl taking down old one.complete all as specified and as directed.