Loading…
Loading…
Tender ID
Tender Value
₹58.2 L
EMD Value
₹1.2 L
Closing Date
16 Apr 2026, 2:00 pmClosed
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. Please follow GCC-April-2022 for Annexure-VIB. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. [NOTE: Failing of submission of Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet shall be liable for rejection.] [NOTE: Client certificate from other than Govt Organization should be duly supported by Form 16A/26AS generated] through TRACES of Income Tax Department of India.]
The tenderer must have successfully completed or substantially completed any of the following during last 07(seven) years, ending last day of month previous to the one in which tender is invited: - Three similar works each costing not less than the amount equal to 30% of advertised value of the tender OR two similar works each costing not less than the amount equal to 40% of advertised value of the tender OR- One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (NOTE: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/ registered at least 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.) [NOTE: Failing to submit of appropriate document against the defined Similar Nature of Work issued by the competent authority shall be liable for rejection.] For details of substantially completed works IR- GCC-April-2022 or latest with all correction slips upto the date of closing of tender will be followed.
Defination of Similar Work :- Supply, Erection, Testing and Commissioning of Architectural lighting or Facade Lighting of Heritage Building / Monument / Memorial OR Lighting with LEDs of Seminaries of building / Monument Complex / Sports Complex/ Stadium and other Structures.
38 conditions · 1 needing a document upload
Upload scanned copy, in PDF format, of the complete address of the firm, contact no. pan no., etc. in a format to which all the correspondences shall be made by the Railway.
Bidder must follow Public Procurement Policy (Make in India) Order 2017, dated 15/06/2017, issued by Department of Industrial Promotion and Policy, Ministry of Commerce, circulated vide Railway Board letter no. 2015/RS(G)/779/5 dated 03/08/2017 and 27/12/2017. The definition and calculation of local content in accordance with the Make in India policy as approved by PCEE/ER is 50% of Minimum Local Content (MLC).
The power of attorney in the name of the person authorized to do all correspondence related to work along with resolution passed by the board of Director, affidavit stating that the tenderer is the sole proprietor of the said firm in case of proprietor firm. Copy of POA (Power of Attorney) may be attached.
Upload scanned copy, in PDF format, of any other letters/documents etc., the agency intends to submit.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
In case the office remains closed on the date of opening day of tender due to any unforeseen circumstances like bandh, strike, natural calamities, riot and civil commotion etc. The tender will be opened on the next working day at same time and place.
This Tender conforms to guidelines in GCC April 2022 and will be in conformity with amendment as made time to time thereafter.For any matters not specifically mentioned in this Tender Paper, the provision of General Condition of Contract (G.C.C. April 2022 or latest) for works as amended from time to time ,will govern this contract mutates mutandis.
Standard format for Guarantee Bond for security deposit is uploaded in document as ''GUARANTEE BOND FORSECURITY DEPOSIT''.
All rates of the items in the Schedules are inclusive of GST (GST Considered as 18%).The GST Act and Rules will be applicable.
For other terms and conditions with additional information, "Open E-Tender Document" uploaded herewith is to be referred.
Electrical works guideline in details will be as per "LT & HT Electrical Booklet" which has been uploaded in document separately.
Deviations from the contract or the technical specifications if any, Railway Reserves Right to accept or reject the deviations or the offer if not acceptable without assigning any reason.
Location of Work: Kalyani, Shantipur and Gede.
The work will be executed under the guidance of SSE/E/G/NH (IC) and SSE/E/G/RHA (IC).
Sr. SE/E/G/NH (IC) who will be the Co-Ordinator of the whole work. Day to day work will be looked after by concerned sectional Sr. SEE/G or JEE/G.
In case of any ambiguity in General Specification or RDSO Specification or technical details or any other confusion arises, it may be collected/clarified from Sr.DEE(G)/SDAH office if required before bidding.
This contract includes site cleaning during the time of execution of the work by the successful bidder. Noncompliance of cleaning items after the work done to a satisfactory level, Railway will impose a penalty of maximum 0.05% of the contract value apart from holding up of payments for items pertaining to cleaning of works, which will be decided by Railway authority.
Any typographical error shall not be construed to be befitting of the Contractor. In such cases the interpretation and decision of Sr. DEE/ G/ SDAH shall be final and binding up on the tenderer.
Upgradation of approach lighting and other ancillary work for Kalyani, Shantipur and Gede.
ELEG-OT-1313-2025-26
ELEG-OT-1313-2025-26
Open
Works - General
2 Months
Kolkata, West Bengal
₹0
₹1.2 L
16 Apr 2026
25 Mar 2026
2 Apr 2026
31 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| Supply and fixing of RGBW Linear Wall Washer light 60-70W, DMX controlled, Beam Angle 10-30 degree, each segment length 1 meter complete with all cable connection accessories. (LED luminaires should conform to min IP:65) (LED Luminaries Make - Bajaj/Philips/ Havells/ Crompton/ Panasonic/ Orient/ Surya/Canara Lighting/Polycab/Jaquar/Magik/Wipro) | — | 70.00 | — | — | |
| Supply and fixing of Linear Wall Washer light 60-70W, Beam Angle 10-30 degree, each segment length 1 meter complete with all cable connection accessories. (LED luminaires should conform to min IP:65)(LED Luminaries Make - Bajaj/Philips/ Havells/ Crompton/ Panasonic/ Orient/ Surya/Canara Lighting/ Polycab/ Jaquar/ Magik/Wipro) | — | 28.00 | — | — | |
| Supply of RGBW LED Projection Spot/Flood Light of approx 45-50W DMX controlled, Beam Angle 10-30 degree with pressure die cast aluminium housing complete with all accessories. (LED luminaires should conform to min IP:65) (LED Luminaries Make - Bajaj/Philips/ Havells/ Crompton/ Panasonic/ Orient/ Surya/Canara Lighting /Polycab/Jaquar/Magik/Wipro) | — | 28.00 | — | — | |
| Supply of RGBW LED Projection Spot/Flood Light of approx 75-80W, DMX Controlled, Beam Angle 10-30 degree with pressure die cast aluminium housing complete with all accessories. (LED luminaires should conform to min IP:65) (LED Luminaries Make - Bajaj/Philips/ Havells/ Crompton/ Panasonic/ Orient/ Surya/Canara Lighting/ Polycab/Jaquar/Magik/Wipro) | — | 17.00 | — | — | |
| Supply of RGBW LED Projection Spot/Flood Light of approx 100W DMX controlled, Beam Angle 10-30 degree, with pressure die cast aluminium housing complete with all accessories. (LED luminaires should conform to min IP:65) (LED Luminaries Make - Bajaj/Philips/ Havells/ Crompton/ Panasonic/ Orient/ Surya/Canara Lighting /Polycab/Jaquar/Magik/Wipro) | — | 10.00 | — | — | |
| Supply of RGBW LED Projection Spot/Flood Light of approx 150W DMX controlled, Beam Angle 10-30 degree, with pressure die cast aluminium housing complete with all accessories. (LED luminaires should conform to min IP:65) (LED Luminaries Make - Bajaj/Philips/ Havells/ Crompton/ Panasonic/ Orient/ Surya/Canara Lighting /Polycab/Jaquar/Magik/Wipro) | — | 15.00 | — | — | |
| Supply of RGBW Neon Flex LED Light of approx 14-15W/m complete with all accessories.(LED luminaires should conform to min IP:65) (LED Luminaries Make - Bajaj/Philips/Havells/ Crompton/ Panasonic/ Orient/ Surya/Canara Lighting/Polycab/Jaquar/Magik/Wipro) [1 mtr = 1 number] | — | 260.00 | — | — | |
| Supply, laying of Aluminium Profile with/without diffuser for Flexi Light. | — | 140.00 | — | — | |
| Supply of LED driver to power 200-250W with 100-240V AC with Output DC voltage 24V. | — | 33.00 | — | — | |
| Supply of DMX Decoder for LED strip light. | — | 10.00 | — | — | |
| Supply and Laying of Waterproof Power Connectors for Light Fixture. | — | 170.00 | — | — | |
| Supply and Laying of Waterproof DMX Connectors for light fixture. | — | 113.00 | — | — | |
| SITC Of 8 Channel opto isolated DMX signal Amplifier and Splitter. | — | 2.00 | — | — | |
| Supply of Warm White LED Spot Light of approx 15W with pressure die cast aluminium housing complete with all accessories. (LED luminaires should conform to min IP:65) (LED Luminaries Make - Bajaj/Philips/ Havells/ Crompton/ Panasonic/ Orient/ Surya/Canara Lighting/Polycab/Jaquar/Magik/Wipro) | — | 10.00 | — | — | |
| Supply of Warm White LED Flood Light of approx 50W with pressure die cast aluminium housing complete with all accessories. (LED luminaires should conform to min IP:65) (LED Luminaries Make - Bajaj/Philips/ Havells/ Crompton/ Panasonic/ Orient/ Surya/Canara Lighting/Polycab/Jaquar/Magik/Wipro) | — | 48.00 | — | — | |
| Supply of warm white LED Underwater Fountain Light of approx 15W , Beam Angle 20-30 degree, complete with all accessories. (LED luminaires should conform to min IP:66) (LED Luminaries Make - Bajaj/Philips/ Havells/ Crompton/ Panasonic/ Orient/ Surya/Canara Lighting/Polycab/Jaquar/Magik/Wipro) | — | 10.00 | — | — | |
| Supply of Warm White LED Flex 15W/m complete with all accessories. (LED luminaires should conform to min IP:65) (LED Luminaries Make - Bajaj/Philips/ Havells/ Crompton/ Panasonic/ Orient/ Surya/Canara Lighting/Polycab/Jaquar/Magik/Wipro) [5 mtr = 1 number] | — | 30.00 | — | — | |
| SITC Of Digital Lighting Console with 1024 DMX channels • 1024 Channels. • 96 Fixtures. • 96 Dimmer Control Channels. • Time control of scenes: Fade in/out, LTP slope • Channels for each fixture 40 primary + 40 fine tune • LCD display with back light • 600 Scene step • 60 Scenes/Playbacks • 10 Scenes to run simultaneoulsy • Shape generato: Shapes of Dimmer, Pan/Tilt, RGB, CMY, Color, Gobo, Iris and Focus • Master slider - Global, playback, fixture • USB Memory - FAT32 supported. | — | 2.00 | — | — | |
| Supply and Laying of PVC Copper unarmoured flexible FRLSH insulated multicore cable 1100V grade confirming to IS694 size 3cx1.5 sq mm. (Make: Havells/Gloster/Polycab/ RR Kabel/KEI/Mescab) | — | 1300.00 | — | — | |
| Supply and Laying of PVC Copper unarmoured flexible FRLSH insulated multicore cable 1100V grade confirming to IS694 size 3cx2.5 sq mm. (Make: Havells/Gloster/Polycab/ RR Kabel/KEI/Mescab) | — | 1300.00 | — | — | |
| Supply and Laying of PVC Copper unarmoured flexible FRLSH insulated multicore cable 1100V grade confirming to IS694 size 5cx0.5 sq mm. (Make:Havells/Gloster/Polycab/ RR Kabel/KEI/Mescab) | — | 150.00 | — | — | |
| Supply and Laying of screened 2/4 core shielded DMX signal cable for DMX network. | — | 1300.00 | — | — | |
| Supply, installation, testing, and commissioning of 3 Phase,4 way distribution board (Metal door,IP:43, TP&N vertical type) comprising of the following : a) MCB 4P 63A, B/cap:10KA - 01 no., b) MCB SP 6/10A, B/cap - 10 KA -08 nos.. Work shall include complete wiring terminations, provision of all necessary mounting hardware, accessories, and interconnections, executed as per site conditions and in compliance with IS/IEC standards. (Switchgear Make: Siemens/ ABB/ Schneider/ Lauritz Knudsen/ C&S/Havells/ Legrand/Hager) | — | 6.00 | — | — | |
| Fixing of Flood/spot light fittings with suitable clamps etc. | — | 128.00 | — | — | |
| Fixing of Strip light linear wall washer etc. with all necessary accessories and fixtures. | — | 386.00 | — | — | |
| Supply, Installation, Testing & Commissioning of IP65 4 way waterproof power junction box / gangway with terminal strip for terminal connections for Driver and decoder. | — | 20.00 | — | — | |
| Other accessories like Junction Boxes, nuts bolts clamps, conduits etc required for complete installation of the system, luminaires commissioning and programming for DMX Controller. | — | 2.00 | — | — | |
| Other accessories like Junction Boxes, nuts bolts clamps, conduits etc required for complete installation of the system, luminaires commissioning. | — | 1.00 | — | — | |
| Design, Supply, Installation, testing & commissioning of 12.5 meters Lighting mast fabricated part as per dimension 12.5 Mtrs. High Mast Tower Polygonal Shape with suitable supplied aviation lights Wind Speed up to 180 Km/hr.Suitable for 08 Luminaries Material Cons.: BSEN 10025 or Equivalent 12.5 Mtrs High Mast Accs. Mechanical Components including Head Frame & Pulley Assay, Winch Bracket, Lantern Carriage Ring, Luminaries Mounting. Arms, Resting Bracket Guide Ring, Compensating Disc, Lightening Arrestor.etc. Wire Rope, D Suckle Clamps , Nuts and Bolts. Cable with termination & distribution box. Double Drum Winch Assembly Foundation Bolt with Anchored & Template . Power Tool (Integral) (Bottom Dia : 340 mm , Top Dia : 150 mm, Materials. Thk : 4mm, 3mm, Base Plate - 540 x 20 mm(Thik), PCD: 440 mm , F. Bolt - M 24 x6Nos x 750 mm long ) (Make- B. P. Projects/ Transrail/ Crompton/ Bajaj/ Utkarsh) | — | 1.00 | — | — | |
| Design, Manufacture, Display of wall/hanging/floor mounting type LED illuminated Sign/direction Boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2mm thickness. The text/graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed/ router cut on monomeric calendared vinyl of 70 um thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8W/ sq.ft and with brightness more than ambient light. Suitable size end cap of 1.5mm thick SS304 should be provided.[Quantity (sq.ft.) will be measured for single side only even if a signage board is both sided.] | — | 27.00 | — | — | |
| Dismantling of existing damaged Rail Pole/Tubular Pole. Rail Pole/Tubular Pole to be cut by Gas cutter from the least bottom level. Released Rail Pole to be stacked in an isolated area apart from platform. Released Tubular Pole to be deposited to the custody of concerned Sr. SEE (G) by the Firm. Exposed Cables to be cleared or buried in to the ground. | — | 5.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
FormatofGuaranteeBond.pdf
ATTACHMENT
2022_CE-I_CT_GCC-2022Policy14_07_20221.pdf
ATTACHMENT
GCC-April-2022.pdf
ATTACHMENT
LTHTElectricalBooklet.pdf
ATTACHMENT
OpenTenderDocument.pdf
ATTACHMENT
2025_01_09IIndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_9ACS-9.pdf
ATTACHMENT
OpenTenderDocument.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .