MISC REPAIR TO DRAINS, COMPOUND WALL, FENCING, AND HARD STANDING ETC IN THE AREA OF AGE B/R IV UNDER GE (MCTE) MHOW

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and directed.

M&L for 300 x 300 x 10mm thick heavy duty (ENDURA) ceramic floor tile laid in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for pre polished coloured cement concrete chequred tile of approved quality size 300 x 300 x 25mm thick on floors over and including 20mm thick screed bed CM 1:6 set and jointed in neat cement slurry and pointed with colour to match th tiles complete all as specified and directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of concrete/ brick exterior surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L for preparing of newly plastered surface on exterior wall and applying two coats of cement paint over one coat of priming the surfaces all as specified and directed.

M&L for complete removal of existing treatment from wall by scrapping of surfaces of old decorated walls etc, and applying Birla/ JK wall care white putty 2mm thick for levelling the surfaces including properly making of 'V' shape crakes and filling of all crakes with crakes seal of walls & applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer etc complete all as specified and directed.

Distmantling post or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed gound complete all as specified and directed.

Dismantling fencing of wire/ mesh, any type and size complete all as specified and directed.

S&F in repair Galvanised 2 strand, steel Barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.

Restraining and resecuring steel barbed wires of any description including making good staples etc. complete all as specified and directed.

S&F chainlink fencing, MS galvanised of mesh size 50mm x 50mm and dia of wire 4mm or as directed by Engineer in Charge

Excavation in post holes each n.exc 0.50cum, getting out hard/dense soil as, returning, filling, in and ramming earth or broken rubble mixed with earth around, in layers n.exc. 25cm, watering and removing surplus soil complete all as specified and directed.

M&L for cement concrete in foundations, filling, bed blocks and mass concrete type D-2 (1:4:8) (40mm graded aggregate) complete all as specified and directed.

S&F mild steel angle iron posts and struts in fencing post and iron flats for securing chain link fencing including all necessary drilling bolting etc. and similar work complete all as specified.

S&F mild steel screw bolts machine made with hehagonal or square heads at one end and screwed the other, or screwed both ends each screwed and to be fitted with washers and one hexagonal or squere nuts n. exc 5 cm long and dia of neck 10mm. complete all as specified.

S&F mild steel bars 10mm dia and over cut to length bent to shape and fixed in chain link fencing to keep it straight complete all as specified.

M&L for preparation of new or previously untreated surfaces of steel n. exc 10 cm in width or girth and unconnected with other painting and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed.

Dismantling, jallies of any description fixed in any position complete all as specified and directed.

Providing precast cement concrete louvres and jallies, 35mm thick type B0 1:2:4 ( 12.5mm graded aggregate) set in cement mortar (1:4) (mea-sured solid), including all mouldings but excluding frame complete all as specified and directed.

M&L for PCC 75mm thick type B2 (1:2:4) using 40mm graded stone aggregate in plinth protection, joints should be filled with bitumen primer etc, complete all as specified and as directed.

M&L for Cement concreat type B-0 (1:2:4) using 12.5mm graded stone aggregate 25mm thick finished surface rough to receive tiliing complete all as specified and directed.

Demolition of brick work built in cement mortar in any position and removing rubbish off the premises within 50m complete all as specified and directed.

M&L for bricks work as sub-class 'B' flyash, exc 6m in mean radius, built in CM (1:4), complete all as specified and directed.

M&L for brick work sub-class 'B' flyash straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description etc complete all as specified and directed.

Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site complete all as specified and directed

M&L for Mild steel frame works as in gates ornamental and intricate design including pintil hinges complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed.

Demolition of paver block, interlocking tile etc of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as specified and directed.

M&L for PCC 75mm thick 1:4:8 type B2 using 40mm graded stone aggregate as insub base finishing the surface rough to receive tilies complete all as specified and directed.

M&L for machine pressed precast concrete interlocing paver block any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 grade laid dry in floor/ path with and including 40mm thick (Compacted thickness) crushed stone sand cushioning complete all as specified and directed.

M&L for machine pressed precast concrete interlocing paver block any shape and size conforming to IS-15658-2006 of 80mm thickness, M-40 grade laid dry in floor/ path with and including 40mm thick (Compacted thickness) crushed stone sand cushioning complete all as specified and directed.

M&L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/rounding ) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ompleteincluding 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Taking down PCC paver block/ tiles, dry laid, of any thickness and re-laying in same position or position n exc 500m from location as directed by Engr-in-Charge complete all as specified and directed.

Excavation in trenches n. exc. 1.50 m wide and n. exc. 1.50 m deep for foundation of sewage lines, man holes etc; n. exc. 10 sqm on plan and n. exc. 1.50 m depth and getting out in hard dense soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n exc 25 cm in any type of soil complete all as specified and directed.

Removing excavated soil to a distance exceeding 250 metre but not exceeding 500 metere and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and directed.

M & L for cement concrete type B-1, 1:2:4 mix (using 20 graded stone aggregate) as in benching including necessary formwork complete all as specified.

Extra for forming fair finished to channel or drain 30 cm inner girth in cement concrete using extra cement including mitred/ stopped ends, frames mould etc; complete all as specified and directed.

M&L for providing PCC 1:3:6, type C-2 using 40mm graded stone aggregate as in drains/ surface, channels including form work complete all as specified and directed.

Providing pre cast reinforced concrete type B-1, 1:2:4 mix (using 20mm graded stone aggregate) for cover slab, set in CM 1:4 including necessary form work complete all as specified.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for RCC pipe 300mm dia. Class - NP-2 one coller per length of pipe complete all as specified and directed.

Providing plain cement concrete type C-2, 1:3:6 mix (using 20mm graded stone aggregate) as in bed to drain pipes of 300mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Robin Associates (BID ID -3306940)

Goyal Construction (BID ID -3313349)

sunway associates (BID ID -3313134)

GIRIRAJ CONSTRUCTION AND TRADERS (BID ID -3312793)