COMPREHENSIVE REPAIR TO CERTAIN BLDGS OF MALHOTRA ENCLAVE, 2 and 3 MED REGT AND TA BN AT AGE AURANGABAD UNDER GE(S) AHMEDNAGAR

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar/cement lime mortar including all quoins, arches, pillars,etc, but including ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Dismanlting floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.

Dismantling of kota stone, granite, cuddapah stone slabs, interlocking tiles etc of any description in floor, laid, bedded & pointed in any mortar, all as specified and as directed.

Taking down cement plaster on brick/ stone/ concrete suraces including raking out joints, hacking for key scrubbing down with water etc all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area n.exc 1.50 sqm each and making good disturbed surfaces of walls in cement mortar (1:3) complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area exc 1.50 sqm but n exc 4 sqm each and making good disturbed surfaces of walls in cement mortar (1:3) complete all as specified and as directed.

Taking down shutters of any description, area exc 1 sqm but n.exc 2 sqm each leaf complete all as specified & as directed.

Taking down aluminium frame and shutters of doors, windows & ventilators any type all as specified and as directed.

Taking up or down 15mm bore existing steel tubing and connections complete all as specified and as directed.

Taking up or down 20mm bore existing steel tubing and connections complete all as specified and as directed

M&L for PCC 1:3:6, type C-1 using 20mm graded stone aggregate as in roof kerbs/mud stops, rounded or chamfered on edge/bed blocks for hold fasts including necessary formwork complete all as specified and as directed.

M&L for precast reinforced cement concrete 1:2:4, type B-1, using 20mm graded stone aggregates in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and as directed. Note : Reinforcement shall be measured and paid seperately under respective item.

M&L in repairs for precast cement concrete 1:2:4, type B-0, (using 12.5mm graded stone aggregates) louvers and jallies, 25mm thick (measured solid), including all mouldings, mild steel wire in reinforcement, set in cement mortar 1:4 all as specified and as directed.

M&L for precast cement concrete 1:2:4, type B1 using 20mm graded stone aggregates as in window or door cills, lintels, bressumers, steps, string courses, copings, kneelers, apex stones, pier caps, columns, posts, plastes, pintle blocks, anchorage blocks, corbels, brackets, etc. with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match all as specified and as directed.

M&L for brickwork with old size, subclass ‘B’ bricks, straight or curved on plan, exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

All as per serial item No 19 but except bricks. Note : Old bricks obtained from demolition shall be reused.

M&L for second class hardwood, 35 mm thick, factory made, plain framed , panelled shutters (two panels) with panel of 9 mm thick BWP plywood bonded with high quality phenol-formal-dehyde synthetic resin adhesive, confirming to IS-710, the size of rails & style shall be as per IS -1003 (Part I) kiln seasoned as per IS -1141 & chemically pressure treated as per IS-401 complete all as specified & as directed.

S&F 35 mm thick, second class hard wood, glazed and and skeleton shutters, factory made, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats all as specified and as directed.

M&L for 30mm thick, flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both faces including teak wood beading, 6mm thick all around complete all as specified and as directed.

S&F factory made, solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet, reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing given in SSR 2009 Part I complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

S&F 150 mm size aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and as directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S&F 100 mm size mild steel butt hinges, medium weight, cold rolled, ISI marked, complete all as specified and as directed.

S&F 75 mm size stainless steel butt hinges, medium weight, cold rolled, ISI marked, complete all as specified and as directed.

S&F in repairs, 300mm size, mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.

S&F 150mm size aluminium handles, cast type, anodised complete all as specified and as directed.

S&F in repairs, harrison curtain rails, 20mm dia, mild steel, plastic coated, fancy type with and including fixing brackets, stops etc complete wooden or PVC plug all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repairs, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repairs, double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundaion box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and as directed .

M&L for mild steel framed work such as in grills, grating etc with end of bars shoulderd and/or riveted, welded or forged into spikes, framed guard bars iron doors, ladders, framed balusters, walk ways. railings, framed work of water tanks and similar work conforming to Fe 290 Gde E-165 all as specified and as directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.

M&L for rolled mild steel sections conforming to Fe-290 (Gde E-165) as in door chowkats/frames including cutting to required length, welding, etc, including hold fast complete all as specified & as directed.

S&F factory made steel windows with side hung shutter including box type hinges, steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F factory made steel windows with side hung shutter including box type hinges, steel handle and steel peg stay complete without glazing bars, complete all as specified and as directed.

S&F anodised aluminium framed for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and as directed.

S&F anodised aluminium door shutters, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading screws etc and locking arrangement complete all as specified and as directed.

S&F laminated gypsum tile board, 8mm thick with textured white colour PVC film on the face side and metalized polyster (MPL) film on rear side in ceiling as per manufacturers instructions of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, including dismantling existing false ceiling work of any description all as specified and as directed.

S&F 6mm thick, asbestos cement corrugated or semi corrugated sheets in roofs, walls etc, fixed with L or J type or cranked hook bolts all as specified and as directed.

S&F 6mm thick, asbestos cement, two piece, serrated ridge for corrugated or semi corrugated asbestos roof sheets, fixed with L or J type or cranked hook bolts all as specified and as directed.

S&F prepainted galvalume aluminium zinc coated galvanised iron based corrugated steel sheets, 0.5 mm thick of any colour having tensile strength 550 MPA as in roof covering or ridges, hips and straight flashing or in fixed with self taping screws (length & girth as fixed) complete all as specified and as directed.

S&F prepainted galvalume aluminium zinc coated galvanised Iron based plain steel sheets, 0.50mm thick, with side lap and end lap of any colour having tensile strength 550 MPA as in ridges, hips, valley gutters, drip and straight flashing or in roof covering/cladding fixed with self taping screws (length & girth as fixed) complete all as specified and as directed.

M&L for poviding and laying in situ water proofing treatment with APP (Atactic Polypropylene) polymer modified prefabricated membrane over roof with following procedure complete including taking down existing roof treatment of any type and any thickness including mud in roofs, plastering, leeping plaster of any thickness cutting & uprooting trees /roots / vegetation growth & removing the debris from the site premises distance upto 1 km from the site all as specified & as directed:- (a) Cleaning existing surface properly. (b) Providing and laying 10mm thick screed bed with cement mortar 1:3 in roof surface with and including WPC (liquid) as per manufacturer's instructions. (c) Applying a coat of bitumen primer @ 0.40 litre/sqm on prepared surface. (d) Laying water proofing roof membrane APP polymer modified prefabricated membrane using Butane torch by torch application with 100 mm side laps and 150 mm end lap. All overlap shall be firmly bonded with bitumen primer and levelled by heating the overlaps with Butane torch. Physical properties of APP membrane shall be as under :- (i) Membrane thickness - 3 mm (minimum) (ii) Membrane weight - 3.60 Kg/Sqm (minimum) (iii) Five layer reinforced with Non woven polyester weight not less than 150 Gm/Sqm. (e) Applying two coats of bituminous aluminium paint over APP membrane @ 0.11kg/sqm for each coat. Note : The cost of liquid WPC shall deemed to be included in the rate quoted.

M&L for cleaning existing surfaces properly with steel wire brushes by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick plain cement concrete type B-0,(1:2:4) using 12.5mm graded stone aggregate, finished even and smooth without using extra cement complete all a specified and as directed.

M&L for 75mm thick PCC 1:4:8, type D2, using 40mm graded stone aggregates as in sub base of flooring complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4, type B-0, using 12.5mm graded stone aggregates in subbase, finished rough complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10mm wide & 10mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M&L for coloured non-skid ceramic tiles, 7 to 8 mm thick (square or rectangular), area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for coloured non-skid ceramic tiles, 7 to 8 mm thick (square or rectangular), area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

All as per serial item No 54 above but on vertical surfaces such as dado / skirting, laid over and including 10 mm thick backing coat in cement mortar 1:4.

M&L for coloured non-skid ceramic tiles, 7 to 8 mm thick (square or rectangular), area of each tiles exc 0.18 Sqm but n exc 0.38 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

All as per serial item No 56 above but on vertical surfaces such as dado / skirting laid over and including 10 mm thick backing coat in cement mortar 1:4.

M&L for precast cement concrete coloured chequered tiles with glossy finish of size 25cm x 25cm x 25mm thick, machine pressed with grey cement and pigment, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed or bedding layer in cement mortar 1:6 and pointed in coloured cement to match the colour of tiles complete all as specified and as directed.

M&L for light colour vitrified tiles, 9-10mm thick (Square or rectangular), area of each tile exc 0.36 Sqm but n exc 0.42 sqm as in floors, set and jointed in neat cement slurry & pointed in white or coloured cement to match colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and a directed.

All as per serial item No 59 above but on vertical surfaces such as dado / skirting, laid over and including 10mm thick backing coat in cement mortar 1:4.

M&L for double charged / ultracharged vitrified tiles (any shade), 9-10 mm thick (square or rectangular), area of each tile exc 0.42 Sqm but n exc 1.00 sqm as in floors, set and jointed in neat cement slurry & pointed in white or coloured cement to match colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and a directed.

All as per serial item No 61 above but on vertical surfaces such as dado / skirting, laid over and including 10 mm thick backing coat in cement mortar 1:4.

M&L for glazed coloured ceramic tiles of size 350mm x 250mm x 7mm/450mm x 300mm x 7 mm thick, on vertical surfaces such as dado, skirting, risers to step etc laid over and including 10 mm thick backing coat in cement mortar 1:4, jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles complete all as specified and as directed.

M&L for machine cut kota stone flooring, 20-25 mm thick (size of kota stone slab 22"x22") laid over and including 20mm thick bedding layer of cement mortar 1:6 jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed.

All as per serial item No. 64 here-in-before but 18 to 20 mm thick kota stone on vertical surfaces such as in skiting /dado of size as required at site over and including10mm thick backing coat of cement mortar (1:4) complete all as specified and as directed.

M&L for machine pressed precast conctete interlocking paver block any shape and any size confirming to IS 15658-2006 of 60mm thickness, M -35 grade with grey cement and pigment, laid over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; etc complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick surface/ concrete surfaces, finished even and fair without using extra cement complete all as specified and as directed.

M&L for 10mm thick rendering in cement mortar 1:6 on other than fair faces of brick surface/ concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 5mm thick rendering in cement mortar 1:4 on fair faces of concrete surfaces as in ceiling, finished even & smooth without using extra cement all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of chalk whitining complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted over a coat of primer all as specified and as directed.

M&L for complete removal of existing treatment on walls (any number of layers ) by scrapping with steel scrappers or any other means including filling depressions of scrapped surfaces with wall care putty and applying two coats of oil bound distemper, over a coat of primer complete all as specified and as directed

M&L for complete removal of existing treatment on walls (any number of layers ) by scrapping with steel scrappers or any other means including filling depressions of scrapped surfaces with 1.5 mm (average) thick wall care putty and applying two coats of cement base paint all as specified and as directed

M&L for complete removal of existing treatment of old plastered or unplastered or old wall surfaces, preparation of surfaces and applying two coats of exterior acryclic emulsion weather coat paint, white or tinted, over a coat of primer complete all as specified and as directed.

Hacking out of old broken glass (any thickness, size quality or description) from wooden / metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

S&F sheet glass, 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete all as specified and as directed.

S&F tinted glass, 4.8 mm thick as in glazing to aluminium door, window & partition including pad/gasket complete all as specified and as directed .

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for 15mm bore GI tubing, medium grade with all new fittings and fixed complete on walls and ceilings, concealed in wall or laid in floors etc complete all as specified and as directed.

Refixing old steel tubing 15mm bore, with and including all new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and as directed.

M&L for 20 mm bore GI tubing medium grade with all new fittings and fixed complete on walls and ceilings, or laid in floors etc complete all as specified and as directed.

Refixing old steel tubing 20mm bore, with and including new fittings (connections) in new or old position (walls, ceiling, floors, etc) complete all as specified and as directed.

M&L for cleaning of water tanks, any type, exc 250 Ltrs but not exc 500 Ltrs capacity, including scrubbing with wire brushes to remove all scales, dirts, fungus etc, cleaning with bleaching powder, removing scales & dirts from mouths of circulating pipe etc & writing date of cleaning on tank with synthetic enamel paint complete all as specified and as directed.

M&L for cleaning of water tanks, any type, exc 500 Ltrs but not exc 1000 Ltrs capacity, including scrubbing with wire brushes to remove all scales, dirts, fungus etc, cleaning with bleaching powder, removing scales & dirts from mouths of circulating pipe etc & writing date of cleaning on tank with synthetic enamel paint complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 500 litres capacity, tripple layered, hoisted and fixed in position and connecting including dismantling existing water tank all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 1000 litres capacity, tripple layered, hoisted and fixed in position and connecting including dismantling existing water tank all as specified and as directed.

S&F in repairs, 20 mm dia ball valves, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule all as specified and as directed.

S&F in repairs, bib tap, 15mm dia, cast copper alloy, fancy type, chromium plated, with crutch or butter- fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs, stop valve, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

S&F in repairs, stop valve, 20mm dia, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.

S&F in repairs, 15mm bore, fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with orwithout lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs, 15mm bore, brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe etc complete all as specified and as directed

S&F in repairs, PVC connections 15 mm dia, 450mm long with PTMT nuts all as specified and as directed.

S&F in repairs, grating doom round 140 mm size of PTMT (Minimum weight 50 gms) all as specified and as directed.

S&F in repairs, brass chromium plated shower rose 125mm size with arm all as specified and as directed.

S&F in repairs, 110mm dia, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls or laid to floors all as specified and as directed.

S&F in repairs, 110mm dia PVC (SWR) bends any radius all as specified and as directed.

S&F in repairs, vitreous China, white, squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest, P or S trap, set in cement concrete including flush pipe and connecting to trap / flushing cistren and making good to floor complete all as specified and as directed.

S&F in repairs, vitreous china wash down water closet ( pedestal pattern), white, including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

S&F in repairs, PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, all as specified and as directed.

S&F in repairs, vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,15mm dia 450mm long PVC connection pipe complete all as specified and as directed.

M&L in repairs, viterous China urinals, half stall (back to corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including brass chromium plated urinal spreader, flush pipe, grating and union for discharge pipe and PVC waste pipe 32mm dia all as specified and as directed.

S&F in repairs, sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf, 12 cm wide and 60 cm long with chromium plated bracket guard and railing complete all as specified and as directed

S&F in repairs, 32 mm dia, standard PVC waste pipe for WHB all as specified and as directed.

S&F in repairs, 40 mm dia, standard PVC waste pipe for sink all as specified and as directed.

S&F in repairs, plastic water closet seat cover, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device all as specified and as directed.

S&F in repairs, health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed

S&F in repairs, sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including down take pipe and CP waste coupling and fixed complete all as specified and directed.

S&F powder coated aluminum windows, three track, made out of aluminium sections (make Jindal or equivalent) including all necessary fittings, 5mm thick sheet glass, rubber/ neoprene beading, locking arrangements all as specified and as directed comprises of following sections :- (a) Window frame (i) Bottom- Section 20671 (Wt not less than 0.699 Kg/m) (ii) Top & Size - 20672 (Wt not less than 0.594 Kg/m) (b) Shutter (i) Vertical (end)- 20669 (Wt not less than 0.481 Kg/m) (ii) Vertical (lock) - 20689 (Wt not less than 0.481 Kg/m) (iii) Bottom - 20718 (Wt not less than 0.263 Kg/m) (iv) Top - 20668 (Wt not less than 0.377 Kg/m)

Supply and fixing factory made UPVC any colour sliding window, three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

M&L for 18 to 20mm granite thick (of any type) table rubbed and polished any colour as in steps, jambs, pillars, windows cill, cooking platform and like in one piece laid over and inlcluding 10mm thick cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and as directed.

Rounding the edges of stone slabs one edge, such as in steps, cooking platform, and other similar situation complete all as specified and directed.

M&L for machine cut Cudappah stone slab 20-25 mm thick laid over and including 20 mm thick bedding layer cement mortar 1:6 including roughening of old concrete floor surfaces by picking, sweeping clean and washing down with water to remove dust with pigments to match the shade of slab including cutting, rubbing and finish polishing complete all as specified and as directed.

M/s.M G Kulkarni

M/S Tirupati Goroba Shendge

D V Engineers and Contractors Pvt Ltd

B.R.ANAND

sunil kaduba dakale

M/s S.R lahoti

sonu enterprises