PROVN OF CERTAIN LBW REVENUE SPECIAL REPAIR WORKS AT BEG AND CENTRE 134 I WKSP EME CAFVD AND ELPHISTONE ROAD IN THE AOR OF GE CENTRAL KIRKEE

Amount

M&L for excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard / dense soil.

M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete etc. complete all as specified and directed.

M&L for PCC (1:2:4) type B-2 (using 40mm graded stone aggregate) as in toe walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

M&L for RCC (nominal mix) type B-1 (1:2:4) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, ramps, deck slabs and in shelves and the like complete all as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) fair finished complete all as specified and directed.

Formwork to sides and soffits of arches, RCC Kerbs etc fair finished. complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed.

M&L for 60mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in ramp floor complete all as specified and directed.

M&L for TMT 10mm dia and over deformed steel bars, cut to length, bend to shape required including cranking, bending and binding with mild steel wire annealed n. less than 0.9mm dia.

Ditto all as per item No.09 above but 6mm to 8mm dia.

M&L for Hardcore with broken stone of gauge n exc 63 mm, deposited, spread and levelled and layer n exc 15 cm thick, water and rolled /rammed to a true surface all as directed and specified.

Dismantling of single or double layer Mangalore pattern or similar tiles in roof coverings complete.

S&F roof tiles, Mangalore Pattern, interlocking at side joints laid dry single layer or similar tiles in roof coverings complete all as directed.

S&F ridge or hip tiles to suit Mangalore Pattern of roofing tiles bedded and jointed in CM 1:6 complete all as directed.

S&F second class hardwood clean swan battens at 30cm centre to centre and sectional area exceeding 13Sqcm and not exceeding 25 Sqcm including 2 coat creosote oiling and dismantling battens for tiles, shingles etc of any size including tiling fillets spaced exc 15cm complete all as directed.

S&F for Galvanised, corrugated mild steel sheeting 0.63 mm thick with two corrugation side lap fixed with L or J type hook with washer and including necessary fittings by using class 8 type sheets , including dismantling of plain or corrugated steel sheeting any gauge thickness including Nainital or similar pattern as in roof covering/vally gutters.

S & F second class hardwood clean swan in scantlings including dismantling existing scantling 40 Sqcm and over in section in any position unframed work complete all as directed.

Dismantling mild steel work of any description and in any position complete all as directed by Engr-in-Charge.

S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.confirming to Fe 410-W (Gde E-250) quality B complete.

Taking down chowkhats or frame with shutter without taking off shutter from the frame exc 1.50 sqm but not exc 4 sqm each & removing from site complete all as specified and directed.

Taking down chowkat or frames n.exc 1.5 sqm each with shutter(without taking of shutters from the frame) and removing from site complete all as directed.

Taking down shutters of any description n exc. 1 Sqm complete all as directed.

Taking down shutters of any description exc 1.0Sqm and n exc. 2.0 Sqm complete all as directed.

S&F 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge.

S & F Pressed steel door frame for doors of size 105 x 60mm with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc complete and filling of hollow section of frame with and including PCC 1:2:4 type B-0 complete all as specified.

S&F for factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles) with 2,4 or 6 raised panel design 2mm thick /moulded prelam pvc sheet/ 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm prelim pvc sheet on back face all as specified and directed.

S & F 100mm long stainless steel medium weight butt hinges for PVC/wooden door shutters and frames fixed with bright screws complete.

S&F 300mm aluminium anodised sliding door bolt with hasp staple (Bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding door bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by the EIC.

S & F aluminium anodised barrel tower bolt of extruded section of size 150 mm complete all as specified and directed by the EIC.

S&F 150mm aluminium handles cast type (anodised), fixed with steel chromium plated bright screws complete all as specified and directed by EIC.

S&F 200mm size Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.56mm dia aperture 1.4mm SS wire mesh and fittings etc complete all as specified and directed.

Supply and fixing of aluminium grill of aperture 75x75mm and section of grill 3.5x5.7mm PM type as per approved sample fixed to aluminium window frame including all necessary beads complete all as specified and directed by Engr-in-Charge.

S&F aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc.incld taking down existing steel ventilator all as directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing, rubbish off the premises.

M&L for cement concrete 1:2:4 Type B-1 (12.5 mm graded aggregate) 25mm thick as in levelling course.

M&L for light shade vitrified tiles flooring 8 to 10mm thick (square/rectangular), polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in net slurry and pointed in white or coloured cement to match existing shed over 15mm thick screed in CM 1:6 complete all as specified and directed.

M&L for coloured non skid ceramic tiles 300 mm x 300 mm x 6 to 7mm thick,in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 all as specified and directed.

M&L Glazed ceramic coloured tiles in vertifical surface 450x350x7mm or 600x300x7mm thick with necessary border etc set and jointed in neat cement slurry and pointed in coloured cement to match over including 10mm thick renderting backcoating in cement mortar 1:4 all as specified and directed

M&L for glazed ceramic tiles coloured in vertical surface (300 x 200 x 7mm thick) on walls, set & jointed in neat cement slurry & pointed colour cement to match including M&L for rendering 10mm thick plaster in cm (1:4) on fair faces of brick work or concrete surfaces including finishing the surface fair and even complete all as specified and directed.

M&L for Machine cut cudappah stone laid vertical or horizontal 18 to 22mm thick jointed with adhesive to make a cooking paltform including dismantling existing RCC/PCC or any type of platform.

M&L for Granite slab (of any type) 20 mm thick machine cut and polished in steps, window-cills, cooking platforms and like in cement mortar (1:4) ,laid, bedded and jointed with grey cement and pointed with white cement and admixture of pigment to match with shade of granit complete all as directed by EIC including demolition of floor or wall tiles, stone slab of any description or thickness laid ,bedded and pointed in any morter all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified.

S & F Gypsum reinforced boards 600x600x8-10mm thick for ceiling hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4mm dia to be fixed by approved rawl plugs, level and justers and screws etc, The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm from adjacent center to form 1200x600mm moulds cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instructions and finishing the surface by applying two coats of plastic emulsion paint complete all as directed.

Supply and fixing of PVC wall panelling of colour with solid holow profile of 8 to 10mm thick and 250 to 300mm wide panels of colour as approved by GE having wall taickness 0.75 to 1.50mm. Fixing shall be done with rowl plug and GI self tapping screws of appropriate size complete all as specified and directed.

M&L 18 to 19mm thick water proof plywood both side machine pressed laminate ( 1mm thick) used for kitchen cabinets door shutter and for kitchen trollys in wooden grain colour, half round edge fixed in repair complete all as directed.

S&F continuous (Piano) hinges, mild steel bright finish or electro glavanised (width of flap when open 30mm) complete all as directed.

Providing and fixing 10 mm thick POP ceiling (Gypsum unhydrous) to flat surface over IInd class soft wood fillets or metal frame work and reinforced with GI wire mesh. (Fillets or metal frame work shall be paid seperately)

S & F Second class sofrwood (Hollack) plain fillets, square, rectangular or triangular in section of area exceeding 13 Sq. cm and not exceeding 25 Sq. cm, wrought, secured with nails complete all as specified.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles.

M&L for Pre-cast cement concrete block masonry with solid blocks type C-1 (1:3:6), exc. 10 cm in width and set in cement mortar (1:6), complete all as specified and directed.

M & L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (CM 1:6) complete all as directed.

All as per item No 52 above but except stone complete all as directed.

Removing cement mortar from and cleaning stones, obtained from masonry of any description (except ashlar facings and dressed stone work) and stone setts from pavings; stacking for measurement including all extra handling and removal and disposing off rubbish complete all as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling, coursed, hammer dressing with maximum depression on face from straight edge held against the dressed surface n.exc 40mm on lime/sand stone all as specified and directed.

M&L for Raised pointing to RR masonry in CM 1:4 all as specified and directed.

M & L for taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

M & L for rendering 20 mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing on walls in CM 1:4 finished even and smooth without using extra cement.

Material and labour for 15mm thick cemet plalster in CM 1:4 over concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M & L for rendering 15mm thick in CM 1:6 on brick surface finished even and fair complete and all as specified.

Dismantling timber scantlings 40 sq. cm and over in section, in any position unframed work all as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws including dismantling old corrugated or semicorrugated sheets of any type and any material complet all as specifieed and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in Ridge covering fixed with self tapping screws including dismantling old plain sheets of any type and any material as in ridge, gutter etc complet all as specifieed and directed.

S&F in repair for Sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets or fixed in cudappah/marble platform including sink coupling and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F for Pressed steel frames size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.

35mm thick second class hard wood plain, framed panelled shutters (any numbers of pannels) with panels of timber flat on both side (feathered edges) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkat complete all as specified and directed.

S&F 2nd class HW 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares (with sash bars any numbers), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as directed.

S&F for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as directed.

S&F for mild steel window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165.

S&F 3mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane complete all as specified and directed.

S & F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

M & L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and aplying one coat of Synthetic enamal paint of any type complete all as specified and directed by Engr-in-Charge.

M & L for two coats of cement base paint including preparation on new plastered wall surfaces complete all as specified.

M & L preparing new plastered wall surfaces by applying 3mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper complete all as specified and as directed.

M & L preparing old plastered wall surfaces by applying avarage 3mm thick wall care putty to get smooth and even surfaces as directed and applying two costs of oil bound distemper complete all as specified and as directed.

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots and applying one coat of white (lime) wash complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls applying two coats of oil bound distemper over one coat chalk whitening primer on walls complete all as specified.

M&L for preparation of wood and wood based materials new surface of any description and girth 10cm wide other wise described applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described applying two coat of synthetic enamel paint over one coat of red oxide/zinc crome primer complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded agg) as in plinth protection incl finishing even & smooth without using extra cement complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm 'thickness (below or above ground level).

Material and labour for 100 mm thick, PCC (1:4:8) type B-2 using 40 mm graded stone aggregates as in sub base complete all as specified.

Material and labour for coloured glossy finish chequered cement concrete tiles of size 30 cm x 30 cm x25 mm thick with grey cement and pigments , set jointed and pointed in neat cement slurry in floors over & including15mm thick screed bed in CM 1:6 including dismantling of existing tiles of any type/size and in any position complete all as specified and directed.

M & L for Machine pressed precast cement conctete interlocking paver block rubber moulded glossy finished any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment including 50mm thick sand cushion including dismantling of existing Interlocking tiles of any type/size and in any position complete all as specified and directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm (Nominal area) drawn in and including PVC casing capping of required size with all fittings and accessories along with one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm as earth lead and connected to earth dolly for one 16 amps socket (Power) point independent including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealed box for mounting of switch, socket all as specified and directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing capping of required size with all fittings and accessories along with one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one fan point or one call bell point controlled by one, one way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealed box for mounting of switch, regulators or bell push and casing capping terminal box for mounting ceiling rose/ holders etc incl dismantling taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing capping of required size with all fittings and accessories along with one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 amps socket point on independent board including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealed box for mounting of switch, socket incl dismantling taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC concealed conduit of required size with all fittings and accessories along with one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one fan point or one call bell point controlled by one, one way switch including existing MS concealed box for mounting of switch, regulators or bell push and casing capping terminal box for mounting ceiling rose/ holders etc incl dismantling taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC concealed conduit of required size with all fittings and accessories along with one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 amps socket point independent including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealed box for mounting of switch, socket incl dismantling taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm (Nominal area) drawn in and including PVC casing capping of required size with all fittings and accessories along with one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 16amps socket (Power) point on independent board including MS concealed box for mounting of switch, socket all as specified and directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm (Nominal area) drawn in and including PVC casing capping of required size with all fittings and accessories along with one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm as earth lead and connected to earth dolly for one 16amps socket (Power) point independent including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealed box for mounting of switch, socket incl dismantling taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing capping of required size with all fittings and accessories along with one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 amps socket point on same board with other switches incl dismantling taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and directed.

M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC concealed conduit of required size with all fittings and accessories along with one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly incl dismantling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of conduit will be measured as one length.

M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FR Copper conductor cable of size 10.0 sqmm (Nominal area) drawn through in and including PVC concealed conduit of required size with all fittings and accessories along with one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FR Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly incl dismantling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of conduit will be measured as one length.

M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC casing capping/PVC conduit size with all fittings and accessories along with one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly incl dismantling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed.NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn through in and including PVC casing capping/PVC conduit size with all fittings and accessories along with one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly incl dismantling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: (a) Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm (Nominal area) drawn through in and including PVC casing capping/PVC conduit size with all fittings and accessories along with one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly incl dismantling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: (a) Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC casing capping/PVC conduit size with all fittings and accessories along with one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly incl dismantling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

Supply and fixing PVC insulated, PVC sheathed twin flat core 1100 volts grade, 2.5 sqmm aluminium stranded conductor from OH conductor or from junction box to street/security/post luminaries all as specified and directed.

S & F street light pole box suitable for fixing LT pole, control box sheet steel enclosure of size 20cmx15cmx10cm made out of 3mm thick MS sheet hinged door and locking arrangements and painting (inside and outside) with epoxy powder coated including suitable bus bar with one MCB and fixing in position with nut bolt. clamp of suitable for connecting of single phase street light supply all as specified and directed.

M & L for street light bracket, made out of 40 mm dia GI pipe, (medium grade) 1.5 metre long bend to shape as required with nut bolt and clamp nd fixing in position complete all as specified and directed.

Supply & fix of LED street light, aesthetically designed roadway luminiare with excellent thermal management Make Crompton Cat part No LSTP-45-CDL or equivalent , HPL, Philips, Bajaj

M&L for ceiling fan 1200mm sweep with suitable down rod including MS ceiling D hook with two pcs of heavy duty fasteners all as specified and directed. Make Bajaj cat Part No KSU code-250467 or equivalent Crompton, Usha

S&F Modular switch single pole one way 6 Amp , 1 module incl dismantling taking down unsv one all as specified and as directed.

S&F Modular socket 6 amps, 5 pin, 230v, 2 module incl dismantling taking down unsv one all as specified and as directed.

S&F Modular socket combination multipurpose 2-in-1 , 3 pin 16 amps and 3 pin 6 amps, 2 module 230v incl dismantling taking down unsv one all as specified and as directed.

S&F Modular type electronic fan regulator with 5 step type,120 W, AC 240 Volts, 50 Hz , 2 module incl dismantling taking down unsv one all as specified and as directed.

S&F Modular Bell push 5 amps incl dismantling taking down unsv one all as specified and as directed.

S&F Bell AC Single pole 230 volts incl dismantling taking down unsv one all as specified and as directed.

S&F Modular white cover plate with frame 1 module incl dismantling taking down unsv one all as specified and as directed.

S&F Modular white cover plate with frame 2 module incl dismantling taking down unsv one all as specified and as directed.

S&F Modular white cover plate with frame 4 module incl dismantling taking down unsv one all as specified and as directed.

S&F Modular white cover plate with frame 6 module incl dismantling taking down unsv one all as specified and as directed.

S&F Modular white cover plate with frame 8 module incl dismantling taking down unsv one all as specified and as directed.

S&F Modular white cover plate with frame 12 module incl dismantling taking down unsv one all as specified and as directed.

S&F Modular metal flush box 1/2 module incl dismantling taking down unsv one all as specified and as directed.

S&F Modular metal flush box 4 module incl dismantling taking down unsv one all as specified and as directed.

S&F Modular metal flush box 5 module incl dismantling taking down unsv one all as specified and as directed.

S&F Modular metal flush box 6 module incl dismantling taking down unsv one all as specified and as directed.

S&F Modular metal flush box 8 module incl dismantling taking down unsv one all as specified and as directed.

S&F Modular metal flush box 12 module incl dismantling taking down unsv one all as specified and as directed.

S&F Metal plug and socket board with MCB SP 20 amp, 16 KA incl dismantling taking down unsv one all as specified and directed. MAKE- Cat Part No- 6078-41 of Legrand or equivalent of Schneider/ABB

S&F Wall mounted fan of 400 mm sweep complete incl clamp, nut, bolt & washers all as specified and directed.Make Bajaj Code 250552.

S&F LED Tube light fitting, 18 watt, CDL, 230 Volts, 4 feet long , complete with all accessories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting casing box 2 nos incl dismantling taking down unsv fitting any type all as specified and directed. Make-CG, Cat Part No LCTL-18-CDL (Trim Linea)or Make HPL cat pt No HPLLEDT5PC20 CW /or equivalent in Bajaj/Philips/HPL/Havells

S&F LED mirror light fitting complete incl suitable clamp, nut, bolt & washers all as specified and directed

S&F Square shaped recess mounted LED slim Flat panel suitable for fixing in aluminium framed ceiling, 36 watt, 2'x2'size, complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable incl dismantling taking down unsv fitting any type all as specified and directed. Make-CG, Cat Part No LCPL-36-CDL (2x2) (Aura) or equivalent in Bajaj/Philips/HPL/Havells

S&F LED building security light 15 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismantling taking down unsv fitting any type all as specified and directed. Make-CG, Cat Part No LSTP-15-CDL or equivalent in Bajaj/Philips/HPL/Havells

Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathe 35 sqmm 3.5 core with required aluminium cable lugs, all as specified and directed.

Cutting to existing road/ hard stading for laying of UG cable of any size and making good to the disturbed surfaces complete all as specified and directed.

Material and labour for dry sand cushioning to underground cables in trenches including spreading, levelling, hand punning and consolidating, complete all as specified and directed.

M & L for reinforced precast concrete cable cover class LV type -1 flat of size 250mm x 150mm x 40 mm for cable protection all as specified and directed by Engr-in-Charge.

Supply and fixing LED bollard light fitting with cylindrical glove complete all as specified and directed.

Supply and fixing LED Doom post top lantern light fitting with cylindrical glove complete all as specified and directed.

Supply and lay LT UG cable 2 core 6 sqmm XLPE insulated sheathed armoured 1100 volts grade laid in trenches complete incl indoor/ out door joint all as directed and specified.

S&F bell push flush type 5 Amp single pole one way incl dismantling taking down unsv one all as specified and as directed

S&F MCB distribution board, IP 43 protection, Double door, metal enclosure, SPN, 230 Volts, 8 way incl dismantling taking down unsv one all as specified and directed. MAKE- Cat Part No- 6077 11 of Legrand or equivalent of Schneider/ABB

S&F MCB, Double Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve incl dismantling taking down unsv one all as specified and directed. MAKE- Cat Part No- A9N2P06C to A9N2P32C of Schneider or equivalent of Legrand/ABB

S&F LED Tube light fitting, 9 watt, CDL, 230 Volts, 2 feet long , complete with all accessories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting casing box 2 nos incl dismantling taking down unsv one all as specified and directed. Make-CG /Havells/Bajaj/Philips/HPL.

S&F LED building security light 15 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener all as specified and directed. Make-HPL/ Philips/Bajaj/CG

Supply and lay LT UG cable 2 core 10 sqmm XLPE insulated sheathed armoured 1100 volts grade laid in trenches complete incl indoor/ out door joint all as directed and specified.

S&F 5 Amp switch piano type single pole one way incl dismantling taking down unsv one all as specified and as directed

S&F socket flush type 6 amps, 5 pin, 230v incl dismantling taking down unsv one all as specified and as directed

S&F switch socket combination multipurpose 2-in-1 flush type 3 pin 16 amps and 3 pin 6 amps, 230v incl dismantling taking down unsv one all as specified and as directed

S&F lamp Holder insulated body with back plate for batten fitting incl dismantling taking down unsv one all as specified and as directed.

S&F LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismantling taking out unsv CFL. Make-HPL/Havells/CG/Bajaj/ Philips

S&F ceiling rose surface Bakelite three terminal incl dismantling taking down unsv one all as specified and as directed.

S&F flush type electronic fan regulator with 5 step type,120 W, AC 240 Volts, 50 Hz incl dismantling taking down unsv one all as specified and as directed.

S&F MCB, Single Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve incl taking down unsv one all as specified and directed. MAKE- Cat Part No- 4085-87 to 4085-95 of Legrand or equivalent of Schneider/ABB.

S&F MCB, Double Pole, 6 to 32 amps, 415 Volts, 10 KA breaking cap, ‘’C” curve incl taking down unsv one all as specified and directed. MAKE- Cat Part No- 4086-28 to 4086-36 of Legrand or equivalent of Schneider/ABB

S&F MCB distribution board, Double door, metal enclosure, SPN, 230 Volts, 4 way incl dismantling taking down unsv one all as specified and directed. MAKE- Cat Part No- 5076 10 of Legrand or equivalent of Schneider/ABB

S&F MCB distribution board, Double door, metal enclosure, SPN, 230 Volts, 8 way incl dismantling taking down unsv one all as specified and directed. MAKE- Cat Part No- 5076 11 of Legrand or equivalent of Schneider/ABB

S&F LED light fitting with LED tube, 2'long, 09 watt, CDL, 230 Volts , complete with all accessories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable with mounting casing box 2 nos all as specified and directed. Make-CG, Cat Part No

S&F LED tube 20 watt to existing fluorescent FTL (T-8) fitting surface mounted after dismantling electronic ballast, internal wiring and complete rewiring with 0.5 sqmm copper flexible conductor FRLSHom connector block to one end of Bipi holder and including connecting up to ceiling rose with 0.5 sqmm two core flexible copper conductor cable all as specified and directed. Make-Cat Part No HLPLEDT8PCP20CW HPL or equivalent in Bajaj/Philips/Crompton Greaves /Havells

S&F industrial box type LED Batten with CRCA body, pre coated with white and prewired suitable for LED tube 1x18/20 watt 4'long incl dismantling taking down unsv fitting any type all as specified and directed. Make-HPL, Cat Part No-HLPLEDT801WT or equivalent of Bajaj/Philips/CG/Havells

S&F LED building security light 15 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismantling taking down unsv fitting any type all as specified and directed. Make-CG, Cat Part No LSTS-15-CDL or equivalent in Bajaj/Philips/HPL/Havells

S&F for LED POST TOP LANTERN FITTING FOR GATE complete with all accessories and including pipe and connecting up ceiling rose with 0.5 sqmm three core copper flexible conductor cable, all as specified and directed . MAKE-Havells, Cat Part No LHFXBON1TN5Q020 or equivalent in Bajaj/Philips/HPL/Havells

M&L for ceiling fan 1200mm sweep including suitable down rod all as specified and as directed Note, U/S Ceiling fan to be deposited to E&M Store Yard . Make Bajaj Cat Part No KSU Code-250467 or equivalent , Crompton, Bajaj

M&L for Exhaust fan Supreme Plus 300 mm sweep including suitable fixing arragement by cutting wall all as specified and as directed by Engr-in-Charge. Note U/S Exhaust fan to be deposited to E&M store yard.. Make Bajaj cat Part No KSU Code-70069 or equivalent Havlles, Crompton Greaves

M & L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified bldg), connected with galvanised steel earthing lead of 4mm dia all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC 1:3:6 type C-2with RCC precast pit cover slab 400mmx400mmx80mm with handle for lifting made out of 8mm dia MS rod, funnel, wire mesh, 15 mm dia light grade GI tubing for protection of GI wire 4mm dia, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including necessary returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.

Earthing continuity conductor or main earthing lead fixed to wall on batten or recess or chased or buried in ground or drawn in conduit/pipe or fixied to poles or any other indicated situation for loop earthing etc. as required 2 mm dia galvanised iron or steel wire complete all as directed.

Excavation in trenches not exc.1.5 met wide and notexc.1.5 met deep and getting out in any type of soil complete all as directed.

M&L for cement concrete in foundations,filling and mass concrete type C-2,1:3:6 using 40 mm graded aggregate complete all as specified and directed.

M&L framed work such as grills, gratings etc with ends of bars soldered or riveted or forged in to spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work confirming to Fe.290 Gde E-165 complete all as directed.

M&L mild steel plates, plain or chequered 3 mm thick or over in thickness in available sizes welded or jointed to framed structure, etc confirming to Fe 290 (Gde E-165 ) complete all as directed.

M&L for preparation of new or previously untreated steel or iron surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as directed.

Supply anf fix water cooler electric driven ( single phase) having approx storage capacity of 80 Ltrs and normal cooling capacity of 40 Ltrs per Hour.Make Voltas/blue star /Usha

Supply and fix voltage stabilizer for automatic operation single phase naturally air cooled indoor type designed forinput variation between 170 volt to 250 volts with out put voltage stabilized at 230 volt with accuracy of ( + - ) 2.5% and of capacity 2 Kva.Make:V-Guard,Whirl pool,D-cons.

Rotational moulded poly-ethylene water storage tank of capacity 1000 Ltrs ( cylindrical vertical with closed top) hoisted and fixed in position including brass float valve 25 mm complete all as specified and as directed.

Cutting GI Pipe 25 mm in position and fixing GI Tee 25 mmX25mmX25 mm complete all as directed.

M&L GI Pipe medium grade with all fittings laid in trenches or fixed on wall of bore 25 mm all as specified and as directed.

M&L GI Pipe medium grade with all fittings laid in trenches or fixed on wall of bore 15 mm all as specified and as directed.

M&L Gunmetal, globe or gate valves with iron wheel head,screwed both ends for iron pipe of bore 15 mm all as specified and as directed.

M&L Gunmetal,globe or gate valves with iron wheel head,screwed both ends for iron pipe of bore 25 mm all as specified and as directed.

M&L single pole and neutral enclosure with a two pin and earth plug and socket with 20 Amp sp MCB in steel enclosure fixed on wall with suitable size of PVC switch board all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of pipe/cable and getting out in soft loose soil.

All as per item No. 176 above but depth exceeding 1.5 m and not exceeding 3 m complete all as specified

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.

Removing of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

PCC (1:3:6) type C-2 using 40mm graded aggregate as in foundation for filling in, mass concrete for foundation of Pole, , repairs to road cutting, path etc complete all as specified and directed.

PCC (1:2:4) type B-1 using 20mm graded aggregate as in coping of new pole etc, including necessary form work complete all as specified and directed.

M&L for brick protection with sub class 'B' brick for UG cable all as specified and as directed.

M&L for steel tubular swaged pole complete with cast iron base plate , final taper plug bolts nuts and screws confirming to IS : 2713 and made out of structural steel tube confirming to IS: 1161 and painted internally with a coat of bituminous paint and externally one primer coat, one under coat and one finishing coat of aluminium paint as specified type 410 SP-31 (9 mtr long).

Supply and fix GI tubing light grade 32 mm bore,on pole /wall with necessary clamps,nuts,bolts and washers/under road cross ISI marked, for cable protection.

Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 10 sqmm 2 core with required aluminium cable lugs.

V.R.PRAJAPATI AND CO.

S.R.M.K Enterprises

Shri Sant Cosntruction