Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
Tender Value
₹1.8 L
Closing Date
14 Dec 2021, 4:00 pmClosed
Er Rajesh Sumbria
Executive Engineer PWD R and B Division Basohli
Please refer in BOQ
2021_PWDJK_150742_1
e-NIT No.65 of 2021-22 dated 29-11-2021
Open Tender
Civil Works
Item Rate
30 days
Basohli
Please refer Tender documents.
5 documents required · 5 mandatory
₹600
Yes
Try Challan detail
Exempted
18 Dec 2021
30 Nov 2021
15 Dec 2021
1 Dec 2021
14 Dec 2021
2 Dec 2021
Amount
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables, etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m including getting out excavated earth as directed by Engineer-in-charge, including all leads and lift. a) All Kind of soil.
Providing and laying in position of cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:5:10 (1 cement:5 coarse sand:10 graded stone aggregate 40mm nominal size) (including all leads and lifts carriages of material by MT/ HL)
Providing and laying in position of cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/ HL)
Centring and shuttering including strutting, propping etc.and removal of form work for : a) Foundations, footings, bases of columns etc. for mass concrete.
Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement:6 coarse sand) (including all leads and lifts carriages of material by MT/ HL)
Extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level (including all leads and lifts carriages of material by MT/ HL)
Half brick masonry with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 (1 cement:4 coarse sand) (including all leads and lifts carriages of material by MT/ HL)
Extra for half brick masonry in superstructure above plinth level upto floor V level (including all leads and lifts carriages of material by MT/ HL)
12mm cement plaster of mix. 1:6 (1 cement:6 fine sand) (including all leads and lifts carriages of material by MT/ HL)
15mm cement plaster on the rough side of single or half brick wall of mix. 1:6 (1 cement: 6 fine sand) (including all leads and lifts carriages of material by MT/ HL)
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. a) New work (Two or more coats applied @ 1.43 litre / 10 sqm. over & including priming coat of exterior primer applied @ 0.90 litre / 10 sqm.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. a) Two or more coat on new steel work
Steel work welded in built up sections /framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. a) In gratings frames, guard bar, ladder, railings, brackets, gates and similar works.
Excavating, supplying & filling of local earth (including royalty) by mechanical transport upto a lead of 5.00 km. also incl. ramming & watering of the earth in layers not exceeding 20cm in trenches, plinth, sides of foundation etc. complete.
Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Sand from Billawar Crusher to site of work for an average lead of 8.00 km by MT. b) Stone agg. (Crusher bajree) below 20mm nominal size from Billawar Crusher to site of work for an average lead of 8.00 km by MT. c) Stone Agg. 40mm nominal size & above from Billawar Crusher to site of work for an average lead of 8.00 km by MT. a) Bricks from Chadwal for an av. lead of 85.00 km. by M.T.
GIYAN CHAND
HARBANS SINGH GOVT CONTRACTOR
PARSHAD LAL
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .