Rep to Roofing Ceiling Flooring Tiling Plumbing Joineries Brick Wk and certain allied wks at MD OTM Accn of MO Goa NOI Rajhans Swimming Pool NCS and Periodical Services Externally and Minor Rep Wks to Certain Bldg of Zone A area under AGE BRII in GE

Amount

Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete.

M & L for precast cement concrete solid blocks set in cement motar 1:6 type C1 1:3:6(20 mm graded aggregate) exc, 10cm in width and setting in mortar complete.

Taking down cement plastering on brick or stone walls including raking out joints hacking for key scrubbing down with water etc inside shafts all as directed by Engr-in-Charge.

M&L Rendering 15mm thick in Cement Mortar 1:4 on Fair Faces of Brick Work or Concrete Surfaces, Plastered Surfaces finishing Fair and Even complete on walls surface with using of water proofing compound or chemical , complete on walls surface all as specified and as directed by Engr-in-Charge. Note: Water Proffing Compound measured and paid separately.

Material and labour for rendering 15 mm thick on brick or concrete surfaces in CM 1:6 finished even and fair with out using extra cement.

M & L 5 mm thick rendering in cement mortar 1:3 on brick work or concrete surface on ceiling finished even and smooth without using extra cement complete all as specified and directed

Supply only integral water proofing compound

Suppy only liquid water proofing (Compound) all as specified and directed.

Material & Labour for applying two coat of oil emulsion distemper on newly surfaces of wall over a coat of primer over wall care putty including perparation of surface by complete removal of distempered and painted surfaces complete.

M&L for applying two coats of Anti fugal paint (Apex) over a coat of primer including preparation of new plastered surfaces of wall complete.

M&L for 3mm thick putty on ceilling surfaces and applying two coat of oil bond distemper over a coat of alkali- resistant priming paintcomplete all as specified and directed

Material & Labour for preparation of old decorated plastered surfaces at walls including cornices, and applying one coat of white wash on wall facia cornices etc incl washing floors, cleaning glass, joinery,electrical fittings, wiring etc completed all as specified and directed by Engr -in-charge.

All as per serial item No 11 here in before but on ceilings.

Demolition of cement concrete (Un reinforced) in ground floors n.exc 15cm thick (above or below grnd level)

M & L 75 mm thick PCC (1 : 3 : 6) type C2 (40mm graded aggregate) Cement concrete as in plinth protection.

M&L Plain Cement concrete Type B-2,1:2:4 (20mm graded aggregate), 100mm thick as in of floorings.finished even and smooth and as directed.

M&l for glass dividing strips,3mm thick and width of strip in 38mm flooring of slab work etc.

Dismantling floor, hearth or wall tiling also in patches including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L joint free Non Skid ceramic plain coloured tiles (also in patches ) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over and including 15 mm thick screeding in CM 1:4 complete all as specified ( screed bed shall not be measured and paid separately).

M&L glazed ceramic coloured tiles 350x250x 6 to7 mm thick/450x350x6 to7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick cement plaster in cement mortar 1:3 complete all as specified and directed.

M&L Vitrified Ceramic tiles 9 to 10 mm thick light shade (also in patches) square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floors, aprons etc, complete all as specified and directed

M&L granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with admisture of pigment to match the shade of granite stone including grinding and polishing over 15 mm thick screed bed of CM (1:4) laid complete.

M&L Machine cut kota slab flooring 20-25 mm thick and including (in one piece) at flooring, steps of staircase etc.over 15 mm thick screed bed of CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for rounding to edges of granite stone slabs one edge, such as in steps, cooking platform, and other similar situations (inner side only)

S&F Machine cut cudappah stone slab 20-25mm thick over 15 mm thick screed bed of CM (1:4) laid, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding,rubbing and polishing complete

M&L for chequrred cement concrete tiles 20cm x20cm x25mm thick over 15 mm thick screed bed of CM (1:4) laid set,jointed and pointed in neat cement slurry in floors .

Taking down wooden Chowkhats or frames not exc. 1.5 sq.m each with shutters (without taking off shutters from the frames) and including making good the wall surfaces complete all as specified.

Taking down wooden Chowkhats or frames exc. 1.5 sq.m and n.exc 4.0 sqm each with shutters (without taking off shutters from the frames) and including making good the wall surfaces complete all as specified.

Taking down wooden shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified.

M&L forming jambs etc to opening including cutting toothing and properly bonding into old work including facing and plastring to match existing work in cement mortar 1:6 etc. complete.

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed .

S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – I 2009 and as directed by GE/Engineer-in-Charge.

S & F 2nd class hard wood plain solid straight chowkats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified.

S&F 2nd class H/W 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed

Supplied and fitted 2nd class H/W 35 mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F aluminium powder coated frame and shutters for windows/ventilators sliding/fixed/openable type complete with necessary fittings such as two concealed lock for each window, roller etc and fixing all as speciefied and directed by Engineer-in-Charge. Note : Weight of aluminium three track section and tubes for windows/ventilators shall not be less than 0.55 Kg/RM and not more than 1.00 Kg/RM. Note : (a) The weight of rubber gasket beading will not be measured with the weight of aluminium shutters, glass will be measuerd and paid separatelly. (b) The rate quoted by the contractor shall also include necessary wheels for sliding shutters and hinges for side hung/top hung shutter as required at sight and concealed locks for windows. (c) The colour of powder coating shall be as approved by GE.

M & L in repair floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 150mm mm complete all as specified and directed.

S & F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 fixed with fasteners.

S&F aluminium anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick in doors / aluminium window shutters incl all fitting arrangement complete.

S&F aluminium anodized, barrel tower bolt of extruded section, 150 mm (ISI marked).

S & F butt hinges medium weight cold rolled mild steel 100 mm long (isi marked)

S & F 150 mm long Aluminium handles, cast type (ISI marked).

S & F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.

Hacking out old broken glass ( any thickness , size , quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads upto 1.5 sqm complete all as specified.

S/F Sheet glass 4mm thickness, ordinary quality and glazing with oil putty /rubber beading all as specified and directed.

S/F figured glass 4mm thickness, ordinary quality and glazing with oil putty /rubber beading all as specified and directed.

PCC type B-1 1:2:4 (20 mm graded crushed stone aggregate) as in coping, bed plates etc slightly rounded or chamfered angles and throating, complete all as specified and directed.

S& F MS flat iron 25 x 3 mm as in hold fast for fixing if chowkats

S&F in repair aluminium anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick in doors / aluminium window shutters rate including removal of aluminium grills aluminium window shutters and refixing them in position after fixing of wiremesh.

M&L ( in repairs) 18 mm thick Prelaminated particle board, interior grade, type-II, prelaminated one side with decorative choice lamination and other side balancing white lamination , fixed with screws as in shutters of Cup Boards complete with Wooden beads of size 18mmx6mm around edges and its varnishing / french polishing as directed and specified.

S&F continuous ( piano) hinges, mild steel , bright finish or electrigalvanised width of flaps (when opened) 30 mm complete all as specified.

S&F 75 mm size Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws in repairs complete all as specified.

S & F 100 mm long Aluminium handles, cast type (ISI marked).

Taking down,easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws,etc and refixing in same opening , shutters of any description exc 1 sqm and n exc 2 sqm each Shutters of any description n exc 1 sq. m each all as specified and directed.

S & F in repair butt hinges medium weight cold rolled mild steel 100 mm long (isi marked)

S&F in repair 150 mm long Aluminium handles cast type (ISI) Marked

S&F in repair aluminium anodized, barrel tower bolt of extruded section, 150 mm (ISI marked).

Supplying 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed in repair complete.

S&F Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed in Aluminium(Die cast body)

Dismantling structural steel work incl doors , gate etc.

S & F Steel rolling shutters with 1.00mm thick laths, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified & directed

S&F for collapsable steel gate, top hung consisting for channel pickets, pivoted flats bars, top and bottom runners and wheel , handle etc as specification, erected in position and securing runners with holdfast and brackets complete all as specified.

M&L for two coat of synthetic enamel paint on steel surfaces including preparation newly steel surfaces over a coat of red oxide zinc chrome primer, over 10 cm in width or girth, not other wise described.

M&L two coats of synthetic enemel paint on new wooden surface over a coat of pink primer incl necessery preparation.

Material and labour preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as directed by Engr-in-Charge.

Material and labour for one coat of synthetic enamel paint on old painted steel surface of any description not otherwise described over 10cm width or girth including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

S&F (in repairs) Vitreous china, white, Squatting pan ,'Orrisa' pattern size 580x440mm with integral footrests water closet) , front or back inlet complete , connection to drain pipe and to flushing pipe , antisyphonage pipe etc complete including making good to floor to match with the exisitng all as specified and details herebelow :-

S&F in repair PVC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hanging devices.approved by GE

S&F ( in repairs) Low level flushing cistern 10 ltr capacity moulded from virgin poly propylene Make Parry ware Brand Slimline Single flush including provision of 32 mm dia PVC flush pipe and making connections, ISI marked or equivalent of other make specified complete all as specified and directed. approved by GE

S&F in repair Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white ( flushing cistern and flush pipe) complete all as specified

S & F vitrous china bowl urinal flat back, size of 460 x 350 x 260 mm white (min ), with grating and union for discharge pipe (excluding flushing system, flush pipe & wate pipe).

S&F in repair CP wall mixer, for mixing hot and cold water fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure with long screwed shanks and fly-nuts , screwed for iron pipe ISI Marked of other specified. approved by GE

S & F 15mm Chromium plated , fancy type,Stop valves / angle valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairapproved by GE

S & F 15mm Bib taps, long nose fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed approved by GE

S&F PVC connections 15mm size with PTMT nuts of length 600 mm or 900mm complete all as specified and directed by Engr-in-Charge.

S&F SS Grating 100 dia with waste hole min weight 25 gns

S & F 20mm, fancy type CP, Pillar taps, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S& F Brass Chromium Plate soap dish single as approved fixing with Brass Chromium plated screws including taking down unserviceable soap dish of any description complete all as specifed and direced by Engineer in charge

S&F Chromium Plated Health Fosset, as Approved, all as per cat part No ALD-573 of Jaguar including all necessary fittings

S & F in repair brass chromium plated shower rose with shower arms with swivel joints including fixing to steel pipe or union, complete all as specified and directed.

S&F Chromium Plated Toilet paper holder with Paper roll as Approved, fixed including Taking down unserviceable Toilet paper holder of any description complete all as specified and directed by Engineer in charge.

Supply and fixing Towel rail of stailess steel 600mm long with and including chromium plated brass screws wooden / plastic cleats approved by GE

Material &Labour for Cutting chases, pinning in. making good to facings where equired and pointing in cement mortar 1:3 to ends or edges and cutting chases for concealed water tubing, and making good, cutting not exc 10 cm girth.

Taking up or down 20 mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed.

Taking up or down 25mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed.

Supplying and laying of CPVC pipes 20mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors,including all fitttings complete all as specified. complete all as specified and directed.

Supplying and laying of CPVC pipes 25mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors,including all fitttings complete all as specified. complete all as specified and directed.

Supply and fixing 32 mm dia pipe of presure rating 6 Kg/Cm2 laid in floor or wall complete all as direted.

Dismantling of cast iron drain pipe 100mm/75mm dia jointed in cement mortar and taking out of trenches/wall/floor etc incl fitting in foul condition.

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S & F 110mm bore PVC (SWR) bends With acces door any radius.

S & F 75mm bore PVC (SWR) bends With acces door any radius.

M&L in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement

Cleaning and removing all scale and dirt, etc, removing all dust and dirt from PVC/RCC tanks exc 500 ltrs and n.exc 1000 ltrs from mouths of circulation pipes etc including letter writing for date of cleaning all as directed by Engr-in-Charge.

Dismantling water tanks exc 500 n exc 1000 ltr. capacity and removing to store

S&F Rotational moulded Polyethylene (HDPE) Water Storage Tank 1000 LITRE Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I, including removing existing water tank fixed with tank nipple, union and Lowering of unserviceable Water Storage Tank with Float Valve of any description complete all as specified and directed by Engineer in charge.

S&F Rotational moulded Polyethylene (HDPE) Water Storage Tank 500 LITRE Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I, including removing existing water tank fixed with tank nipple, union and Lowering of unserviceable Water Storage Tank with Float Valve of any description complete all as specified and directed by Engineer in charge.

S & F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms)

Supply and fixing Union for CPVC pipe of 20 mm outer diameter.

Supply and fix brass elbow (20-15mm)

Dismantling of false ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets.

S&F for Anodised aluminium snap grid frame work for false ceiling, size of grid 605x605 mm fixed with hangers 6mm dia, G.I. (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out G.I. flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia, 40 mm long complete all as specified.

S&F Gupsum board of 12 mm thick for false ceiling 60cm x 60cm with staples on snap grid.

Dismantling of Plain or corrugated steel sheeting , any gauge, thickness, including Nainital or similar pattern roof coverings etc. complete all as specified and directed. (Taking down of existing MS wind tie ( where required) to dismantle the mild steel sheet shall be deemed included in the unit rates)

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates. Fe-410-W(Gde-E-250) quality-B).

S&F Pre-painted galvalume( hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon, AZ 150 gm/sqm both side) , Zincalume (steel) based corrugated sheet 0.50mm thick ,of an approved colour, having tensile strength of 550 Mpa, and finished with resin coat on both surfaces as in roof covering/ cladding to wall,including flashings , ridges, valley etc fixed with self tapping screws complete all as specified.

Removing building materials by truck or tractor with using of if necessary JCB machine and trolly load min 3.0 cum each load for upto 10.00 km including loading, unloading and stacking at the destination and depositing out side defence land all as directed by Engr-in Charge.

Taking down cement plastering on brick or stone walls including raking out joints hacking for key scrubbing down with water etc inside shafts all as directed by Engr-in-Charge.

M&L for rendering 15mm thick cement plaster with cement mortar(1:6) on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement.

M&L for preparation of new treated surfaces and apply three coat of white wash to walls.

M&L one coats of exterior emulsion paint ( Apex or weather coat), white or tinted on old surfaces of walls including prepration of old surfaces and washing floors, cleaning glass, joinery,electrical fittings, wiring etc, of drops and splashes complete all as specified .

Material and labour for one coat of oil bound distemper including preparation of old plastered surfaces complete all as specified and directed.

M&L for preparing old plastered surfaces and applying two coats of cement base paint on surfaces of walls.

Material and labour Painting black circular base n.exc 40 cm dia for building Nos with one coat of synthetic enamel paint.

Material & labour for Writing building Nos or figures (block, Roman, Italic or Indian) with synthetic enamel paint height not exceeding 30cm and width 2 cm over black painted circular base complete

M/L for one coats of floor paint Indigo or equivalent including perparation of old decorated surfaces by filling of cracks with crack seal etc applied with airless spraymachine.

Note :- (1) Rates of external treatment shall deemed to be inclusive of cleaning of bushes/ plants if any found on walls/ceiling/roof and same shall be removed with roots including applying anti growth chemical and making good surfaces. (2) Rate of external treatment include for 15 metre height of building above GL.

SHIVRAJ CONSTRUCTIONS