REPAIR/MAINT OF MOTORIZED ROLLING SHUTTER, BUILDING LIGHTING PROTECTION, EARTHING AND OTHER CONNECTED ITEMS AT COD ESTATE UNDER GE (I) KANPUR

Amount

Taking down complete motorized assembly from shutters and refiitting the same after repair/replacement of following items complete all as specified and directed:- (a) Repair/Replacement of limit switches. (b) Repair/Replacement of compartment comprises of motor copper winded of suitable size & cap to lift the Shutter ,gear box driving end,braking system. (c) Repair/Replacement of operation switches in SS enclosure box. NOTE: The contractor must visit the site before quoting the rates.

Repair/Replacement of Bracket of motorized assembly with suitable fastners set complete all as specified and directed.

Repair/Replacement of round pipe shaft for driving and non driving ends with ring sets of motorized assembly complete all as specified and directed.

Repair/Replacement of non driving end side gear box of motorized assembly with wheel & chain complete all as specified and directed.

S&F steel rolling shutters, without ball bearings 1.00 mm thickness of lath including top cover, anchoring rod, hasp and staple including top cover,anchoring rod,hasp and staple and one shop coat primer, erected in position as indicated including taking down of the same push pull or manual type complete all as specified and directed.

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

Taking down if necessary on ground and overhalling rolling shutters push pull or manual type including oiling, greasing including guide chanel and erected in possition after changing of defective part if any with and including two coat of synthetic enemal paint over and including a coat of primer complete all as specified and directed. (Note- Deffective parts shall be measured separatlly and fixing of those items inclusive in qoted rates.

Supply only Ball bearing for rolling shutters complete all as specified and directed.

Supply only lock rail including sliding locking arrangement with welding as required for motorized rolling shutters complete all as specified and directed.

Supply only repair spring for rolling shutters upto 10 sqm complete all as specified and directed.

M&L for painting of motorized rolling shutter both side in colour decided by Engr-in-charge after scrapping thoroghly complete all as specified and directed.

S&F Test point terminal block of gun metal or phosphorus bronze of size 75x75x25mm, drilled and screwed including 3 Nos, 8 mm dia, 25mm long hexogonal head screw complete all as specified and directed.

M&L in replacment for fixing aluminium strip 25X3.15 mm for earthing fixed to walls of warehouses on batten/ recess/chases/buried in ground /drawn in conduit/pipe or fixed to walss by suitable arrangments or any other indicated situation for loop earthing etc. as required suitable for fixing of upto aluminium rod on roof of warehouses (height will be maximum 50 ft) complete all as specified and directed. NOTE: Special T&Ps for fixing lights at a ceiling hight of above 50 ft will be arranged by the contractor. The rates shall be deemed to be included in this item.

M&L in replacement for submain wiring at a ceiling hight upto 40 ft in warehouses with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 6 sqmm with proper colour coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification and complete all as specified and directed. NOTE: Special T&Ps for submain wiring at a ceiling hight of 40 ft will be arranged by the contractor. The rates shall be deemed to be included in this item.

M&L in replacement of Earthing with galvanised steel earth plate electrode 60×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed incl testing on competion incliding excavation work and site clearance complete all as specified and directed.

Supply and lay GI steel tubes light grade 15 mm complete all as specified and directed

M&L in replacement for submain wiring at a ceiling hight upto 40 ft in warehouses with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 4 sqmm with proper colour coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4.0 Sqmm as earth lead in & including concealed PVC conduit medium grade 25mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed. NOTE: Special T&Ps for submain wiring at a ceiling hight of 40 ft will be arranged by the contractor. The rates shall be deemed to be included in this item.

All as per item No 19 above but for cable of size 6 sqmm and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit complete all as specified and directed.

Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 12 way 240 volt complete all as specified and directed.

All as per item No 21 above but for 8 way complete all as specified and directed.

All as per item No 21 above but for 4 way complete all as specified and directed.

Supply and fixing in replacement MCB SPN 63 amps 230V 'C' curve with rupturing capacity 10 KA complete all as specified and directed.

Supply and fixing in replacement MCB SPN 40 amps 230V 'C' curve with rupturing capacity 10 KA complete all as specified and directed.

Supply and fixing in replacement MCB SP 6-16 amps 230V 'C' curve with rupturing capacity 10 KA complete all as specified and directed.

Supply and fixing in replacement MCB SP 20-40 amps 230V 'C' curve with rupturing capacity 10 KA complete all as specified and directed.

Supply and fixing in replacement MCB TPN 63 amps 415 V 'C' curve with rupturing capacity 10 KA complete all as specified and directed.

Supply and fixing in replacement MCB TPN 40 amps 415 V 'C' curve with rupturing capacity 10 KA complete all as specified and directed.

M&L in replacement Sheet metal enclosure with two pin and earth plug and socket with one single pole and neutral MCB 20 Amp, 10 KA complete all as specified and directed.

Taking out Old Unsv HPSV fitting of any cap/make/size, upto the ceiling height of 40ft in warsehouses and Supply & fixing of highbay luminaries LED Type with PDC housing(surface/ suspended) mounting, intergrated PC optics and 150lm/W efficacy with suitable surge protection, IP-66 protection, providing additional safety chain, suitable for 100 watts with all assesories i.e. Clamp, nut bolts washer and connecting electrically with 3 core copper flexible wire of size 2.5 sqmm from ceiling rose to fitting and complete all as specified and directed NOTE: Special T&Ps for fixing lights at a ceiling hight of 40 ft will be arranged by the contractor. The rates shall be deemed to be included in this item.

All as per item No 31 above but of cap 120 W with 150lm/Watt complete all as specified and directed.

All as per item No 31 above but of cap 80 W with 150lm/Watt complete all as specified and directed.

All as per Item No 31 above but Flame proof Wellglass Highway fitting AL PDC Housing Integerated LED Luminare with heat Resistant toughened glass IP 66 Protection 5700 K rating and suitable for zone 1 &2 and Gas/Vapour T6 temperature class compatible 120 Watts including connection of suitable pvc wire complete all as specified and directed.

Taking out Old Unsv HPSV flood light fitting of any cap/make/size, upto the ceiling height of 25ft in warsehouses and Supply & fixing of LED flood light energy saving, environmental friendly with pressure die-cast housing, toughned glasss with IP66 ingress protection, top opening driver cover for easy maintrencance, Cap 200 watt with high efficacy upto 120lm/W fixed on pole/wall incl electric connections complete all as specified and directed. Note:- Special T&Ps for fixing lights at a ceiling hight of 25 ft will be arranged by the contractor . The rates shall be deemed to be included in this item.The old MS bracket will be painted & fasten.

All as per item No 35 above but of cap 180 Watt complete all as specified and directed.

Taking out Old Unsv HPSV building security light fitting of any cap/make/size, upto the height of 25ft in warsehouses and Supply & fixing of LED street light of cap 45 Watts with pressure die-cast housing with high efficiency LEDs as lighting source and lens embedded PC cover having TOP opening seperate driver compartment with IP66 ingress protection, efficacy upto 120lm/W fixed on pole/wall incl electric connections complete all as specified and directed. Note:- Special T&Ps for fixing lights at a ceiling hight of 25 ft will be arranged by the contractor. The rates shall be deemed to be included in this item.The old MS bracket will be painted & fasten.

All as per item No 37 above but of cap 60 Watt complete all as specified and directed.

All as per item No 37 above but of cap 70 Watt complete all as specified and directed.

Supply and fixing in replacment surface & wall mounted LED 20W tube light fitting batten 4 feet, mirror lite slim type with extruded aluminium housing alongwith 20W LED lamp PC body with all accessories complete all as specified and directed.

Supply and fixing in replacment recessed mounted/ ceiling downlight 36w with pressure die-cost aluminium housing for effective thermal management, high transmission factor PMMA diffuser for better performance and suitable driver complete all as specified and directed.

S&F in replacement of LED post top globe starmade up of unbreakable polycarcarbonate suitable for mounting on gate with led bulb 12 W with proper arrangements and making electrical connection complete all as specified and directed.

M&L for Surface mounted / Recess mounted LED down lighter 15 watts with white powder coated polyconbonate housing and pressure die cast heat sink having high efficiancy complete all as specified and directed.

Supply and fixing in replacement of electronic driver suitable for LED street light of capacity 70/80 watt complete all as specified and directed.

Supply and fixing in replacement of electronic driver suitable for LED street light of capacity 100/120 watt complete all as specified and directed.

Supply and fixing in replacement of electronic driver suitable for LED street light of capacity 150 watt complete all as specified and directed.

ARORA BROTHERS (BID ID -3472048)

A.B.Enterprises (BID ID -3476290)

Bharat Sales Corporation (BID ID -3473572)

SUSHMANAND ENGINEERING WORKS (BID ID -3471660)