REPAIR MAINT OF SECURITY LIGHT STREET LIGHT PERIMETER LIGHTS HIGHMAST LIGHTS SOLAR LIGHTS AND THEIR CONNECTED ITEMS AT OLD CANTT GE GANGTOK

Amount

Excavation in trenches not exceeding 1.5 M in wide and not exc. 1.5 M in depth for taking out or laying of under ground cable in soft / loose soil complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm thick in soil complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50 M and deposited at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

Supply and laying of DWC pipe,ISI marked in trenches or in cable ducts or fixed on walls using clamps along with all accessories like socket,bend,couplers etc confirming to IS 14930,part-II complete with fitting cutting,jointing etc of size 40 mm outer dia complete all as specified and directed by Engr-in-Charge. Note pipe provided sshall be of black colour

M&L for cutting the existing road / PCC / drain for taking out / laying of underground cable including necessary earthwork excavation and making good to match with the exisitng surface complete all as specified and with PCC (1:3:6) type C1 by (using 20 mm graded crushed stone aggregate) 100mm thick complete all as specified and directed.

M&L for 50 mm dia bore galvanised iron light grade for cable protection and sealing both ends including taking out old pipe complete all as specified and as directed.

Taking up/down existing defective cable/ACSR conductor of sizes 2/4 core 10 to 16 sqmm from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including relaying in same or different position/location complete all as specified and as directed. Note: one run of cable and 2 run of ACSR conductor shall be measured as single unit

Supply, laying, jointing and testing XLPE Cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 10 sqmm 2 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.

Supply, laying, jointing and testing XLPE Cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 10 sqmm 4core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.

Supply, laying, jointing and testing XLPE Cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 16 sqmm 4 core including necessary cable lugs, glands, insulation tape etc complete all as specified and as directed.

S&F in replacement street light bracket fabricated from 40mm dia medium grade GI pipe bent to shape not exceeding 1.5 M long alongwith 2 Nos flat iron clamps of size 25 x 4mm flat iron including nuts, bolts and washers suitable for fixing on poles including applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and as directed.

S&F in replacement of clamps suitable for fixing street light on pole fabricated from 32mmx6mm flat iron including nuts, bolts and washers suitable for fixing on poles including applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and as directed.

S&F in replacement of 20 mm dia rigid non metallic PVC Conduit inclusive of all tee, bends,reducers, bell mouth tube ends and fixing accessories such as couplers , lock nuts, saddles, pipe hooks etc complete all as specified and as directed.

S&F in replacement 25 Watt LED decorative post top light fitting of aesthetically designed with symmetrical light distribution spun aluminium landscape luminaire with high power LEDs as light source,Clear cover offers bright illumination for different application IP 65 Rating 240V, 50 HZ, AC supply and with all accessories as required complete all as specified and as directed.

S&F in replacement post top lantern fitting of 35 Watts LED post-top offering comination of sturdy design,execllent illumination and aesthetics in one go, IP-66 and IK 10rating ensures it stands tall amid varied environemtal conditions with all accessories as required complete all as specified and as directed.

S&F in replacement of 54 Watts,120 lumuns/watt with 10KV SPD LED Street light made up of pressure die cast housing with toughned glass, IP 66 protection and impact resistance of IK08 with secondary optics symmetrical light distribution and with all accessories as required complete all as specified and as directed.

S&F in replacement of 42 Watts, 120 lumuns/watt with 10KV SPD LED,Street light made up of pressure die cast aluminium housing with high efficiency LED lighting source and lens embeded PC cover , IP66 protection and impact resistance of IK08 with secondary optics symmetrical light distribution all accessories complete all as specified and as directed.

S&F in replacement 150W LED flood light not less than 120 lumuns/watt with 10KV SPD LED, street light made up of pressure die-cast aluminium housing with high efficiency LED lighting source and lens embeded PC cover , IP66 protection and impact resistance of IK07 with secondary optics symmetrical light distribution as required complete all as specified and as directed.

S&F in replacement 200W LED flood light not less than 120 lumuns/watt with 10KV SPD LED, street light made up of pressure die-cast aluminium housing with high efficiency LED lighting source and lens embeded PC cover , IP66 protection and impact resistance of IK09 with secondary optics symmetrical light distribution as required complete all as specified and as directed

Supply & install steel tubular swaged poles Type 410 SP-31 (9.0 metres long) complete with CI base plate and finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9 metres long) all as specified and as directed. Note:- (a) The unit rates include staying the poles in atruly vertical position till the foundations are properly set. (b) Excavation, foundation concrete, presenative treatment, etc will be measured separately under the appropriate sections. Painting to steel tubullar poles (inside and outside) is however included in the rates of steel tubular (c) The unit Rates for poles shall also apply to struts when poles of the same size are used as struts. (d) The unit rates for steel tubular poles also include provision of finial and cast iron base plate fixed to poles. (e) The unit rates also include drilling of holes in steel tubular poles and hooks for continuos G.I earth wire etc. to the required size and number. (f) The pipe incorporated for steel tubular poles shall be from the makes as indicated under Makes/manufacturer of GI pipes).

S&F of street light terminal boxes made out with SMC material, shock & dust proof of inside size 300x200x105mm as per IS and including 20 Amp, TPN busbar fixed on insulators, 01 No 10Amp, SP MCB, earth termination with nuts & bolts and including 02 sets of flat iron 25x6mm clamps of suitable size with nuts, bolts and washers including two coats of aluminium paint over a coat of primer on exposed steel surfaces complete all as specified and as directed. Sintex cat Part No. GSJB-3020, or equivalent Hansel

Supply only replacement of electronic driver suitable for LED street light fittings of capacity 45 Watt complete all as specified and as directed.

Supply only electronic driver suitable for LED street light fittings of capacity 60 Watt complete all as specified and as directed.

M&L for complete services, repairing and greasing of motors, harnessing wires of 16 M for high mast light poles at site including taking down light and others accessories complete for replacement/repairs of flood light fittings of high mast carriers all as specified and as directed .

M& L for photo sensor for opearation 230 volt, with 1 NO/NC, holder clamp,polycaronate covers, M.S base clamp of the street light contactor complete all as specified and directed

Supply and fix in repairs MCB of 4 pole of 63 Amps, 25 KA, 415 Volt, Icu=Ics=100% complete with spreader terminals connection, testing and comissioning complete all as specified and directed.

S&F in replacement of of 1.5 sqmm 3 core PVC insulated flexible copper conductor wire from street light to terminal box drawn through MS pipe/PVC conduit or as indicated in other locations complete all as specified and as directed.

Supply and fixing miniature circuit breaker (MCB) SP 6 TO 32 Amps amps amp rating 240V, 10KA 'C' curve complete with connection testing and commissioning.

M&L plain cement concerete (1:4:8), type D-2 (using 40mm graded crushed stone aggreegates) as in foundation/Copping filling and mass concrete for pole etc complete all as specified and as directed.

KAMLESH ENTERPRISE (BID ID -3483828)

SANJAY KAUSHIK (BID ID -3483742)

MAHENDRA KHAWAS (BID ID -3484627)

KARMA TSETEN BHUTIA (BID ID -3482410)

BIJAY MITTAL (BID ID -3479308)

M/S ANIL KUMAR THAKUR (BID ID -3482742)

DHARMINDER SINGH (BID ID -3482590)