Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.4 CrAdmitted-Finance | ₹20.4 Cr | L1 | Admitted-Finance |
| 2 | L2₹20.9 Cr+₹52.5 L (2.57%)Admitted-Finance 62A OFFICER COLONY AZAD NAGAR HISAR 125001 | HISAR | HARYANA | 125001 | ₹20.9 Cr+₹52.5 L (2.57%) | L2 | Admitted-Finance |
| 3 | L3₹21.9 Cr+₹1.5 Cr (7.26%)Admitted-Finance 5767 12 MAIN BAZAR MEHAM ROHTAK HARYANA 124112 | MEHAM | ROHTAK | HARYANA | 124112 | ₹21.9 Cr+₹1.5 Cr (7.26%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/s Kisan construction company L1 | Shishpal Govt. Contractor L2 | NASEEB CONSTRUCTION COMPANY L3 |
|---|---|---|---|---|---|---|
| 1.00 | Providing,designing and Fixing of Chest Press Chair Double Code 9124 of size 1800x700x2000mm fabricated with main post of 114 mm dia and 3mm thick and other pipes of 40mm dia 3mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120mm micron thick using Akzo Nobel or equipment in desired shade and colour. all welding joints of pipes shall be robotic welded with joint scalloped as necessary and dressed off removing sharp edges and burrs . Zinc primer paint to be applied at all welding points prior to finishing. Base plate cover shall be made up of version LLDPE plastic by rotational moulding with minimum 4mm thickness UV resident and colour as approved by engineer in charge. High quality grip rubber should be used on handles. Foot hold shall be made of nylon alloy with rounded edge to prevent impact and injury. Maintenance free bearing should be used in equipment manufactured by reputed compony douly sealed and self lubricated to be approved by engineer in charge. Equipment to be fitted with in built limiters. The equipment should be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and when concrete is set Fixing the equipment on to it and cover nuts and bolts. the equipment should be koxtan in quality including GST and Installation charges | 1 | Each | 51,566 ₹51,566 Lowest | 51,566 ₹51,566 Lowest | 51,566 ₹51,566 Lowest |
| 2.00 | Providing,designing and Fixing of SEE SAW fabricated with main post of 114 mm dia and 3mm thick and other pipes of 40mm dia 3mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120mm micron thick using Akzo Nobel or equipment in desired shade and colour. all welding joints of pipes shall be robotic welded with joint scalloped as necessary and dressed off removing sharp edges and burrs . Zinc primer paint to be applied at all welding points prior to finishing. Base plate cover shall be made up of version LLDPE plastic by rotational moulding with minimum 4mm thickness UV resident and colour as approved by engineer in charge. High quality grip rubber should be used on handles. Foot hold shall be made of nylon alloy with rounded edge to prevent impact and injury. Maintenance free bearing should be used in equipment manufactured by reputed compony douly sealed and self lubricated to be approved by engineer in charge. Equipment to be fitted with in built limiters. The equipment should be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and when concrete is set Fixing the equipment on to it and cover nuts and bolts. th the equipment should be koxtan in quality | 2 | Each | 26,786 ₹53,572 Lowest | 26,786 ₹53,572 Lowest | 26,786 ₹53,572 Lowest |
| 3.00 | Supply and Erection of 1-HP Submersible Pump with Starter, copper wire (2.5 mm 3 core) including Bore and Pipes as per requirement of site to complete the work in all respect up to entire satisfaction of engineer-in- charge. (Make: - Crompton| Jindal| V-Guard |) | 1 | Each | 32,500 ₹32,500 Lowest | 32,500 ₹32,500 Lowest | 32,500 ₹32,500 Lowest |
| 4.00 | Pull and Power Push Chair:- Providing, designing and fixing of Pull pair of size 2500 X 800 X 2000 mm fabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.. | 1 | Each | 29,500 ₹29,500 | 25,000 ₹25,000 Lowest | 29,500 ₹29,500 |
| 5.00 | Triple Twister :- Providing, designing and fixing Twister of size 1700 X 1300 X 1300 mm fabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.. | 1 | Each | 29,500 ₹29,500 | 25,000 ₹25,000 Lowest | 29,500 ₹29,500 |
| 6.00 | Dual Sky Stepper or Double Cross Walker :- Providing, designing and fixing Double Cross Walker of size 1600 X 600 X 1600 mm fabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc... | 1 | Each | 29,500 ₹29,500 | 25,000 ₹25,000 Lowest | 29,500 ₹29,500 |
| 7.00 | Providing and fixing of a Garden Hut- Octagonal One Side Length 9` Outer Side Hight 8` Center Hight 11` Complete with Bench..... | 4 | Each | 2,43,000 ₹9,72,000 | 2,43,071 ₹9,72,284 | 1,40,000 ₹5,60,000 Lowest |
| 8.00 | Chain Swing Jhulla- (Two sheater) (10’ height) x (8’ width) with Bearing along with 2” dia M.S. pipe length and top 48’ 1.25” pipe and support 7’ with Chain and hook etc. along with Bearing and bracket Top box of M.S. sheet and 4 Nos M.S. sheet of Patti seat for children with coat paint of Berger paint (painting charges) Bottom hole fast 4 Nos. 1” round axle for bearing 2 Nos...... | 9 | Each | 14,000 ₹1,26,000 Lowest | 14,000 ₹1,26,000 Lowest | 14,000 ₹1,26,000 Lowest |
| 9.00 | Multiplay Station jhula with size 27*15*13ft with 1 Nos climber/Height Gainer, 2 Nos Canopy of 4mm thick, 6.5 ft long Spiral Slider of 6mm thick, 10 ft long Wave Slider of 6mm thick, Tunnel 5 ft long of 4mm thick Etc. with 3” sq. pipe, 1.6” sq. pipe, 3”*1” sq. pipe, 8mm chain with two Nos Chain Swing Sheat Jhula with 2 Nos. Sq. Doom.......... | 1 | Each | 1,72,900 ₹1,72,900 Lowest | 1,72,900 ₹1,72,900 Lowest | 1,72,900 ₹1,72,900 Lowest |
| 10.00 | EARTH FILLING LEAD UP TO 10 KM INCLUDING LOADING UNLOADING | 515.28 | cum | 176 ₹90,689.28 Lowest | 176.6 ₹90,998.45 | 176.6 ₹90,998.45 |
Tender Value
₹21.2 Cr
EMD Value
₹50.0 L
Closing Date
15 Jun 2026, 5:00 pmClosed
Amit Kumar Sharma
Municipal Corporation Hisar
ESTIMATE FOR UP-GRADATION, REPAIR/CONSTRUCTION AND MAINTENANCE OF GREEN BELTS, VARIOUS PARKS IN VARIOUS SECTORS, DEVELOPMENT OF NEW PARKS IN NEWLY APPROVED COLONIES and DEVELOPMENT OF PARKS FOR PERSONS WITH SPECIAL ABILITIES IN MC HISAR
2026_HRY_522047_1
2026DE14BCDD 3119 45D8 8B9A 3FF8CA8B4B4A289ULB
Open Tender
Civil Works
Works
600 days
Hisar
2 documents required · 2 mandatory
₹20,000
₹50.0 L
Yes
MC HISAR
7 Sept 2026
16 May 2026
16 Jun 2026
16 May 2026
15 Jun 2026
16 May 2026
20 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing,designing and Fixing of Chest Press Chair Double Code 9124 of size 1800x700x2000mm fabricated with main post of 114 mm dia and 3mm thick and other pipes of 40mm dia 3mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120mm micron thick using Akzo Nobel or equipment in desired shade and colour. all welding joints of pipes shall be robotic welded with joint scalloped as necessary and dressed off removing sharp edges and burrs . Zinc primer paint to be applied at all welding points prior to finishing. Base plate cover shall be made up of version LLDPE plastic by rotational moulding with minimum 4mm thickness UV resident and colour as approved by engineer in charge. High quality grip rubber should be used on handles. Foot hold shall be made of nylon alloy with rounded edge to prevent impact and injury. Maintenance free bearing should be used in equipment manufactured by reputed compony douly sealed and self lubricated to be approved by engineer in charge. Equipment to be fitted with in built limiters. The equipment should be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and when concrete is set Fixing the equipment on to it and cover nuts and bolts. the equipment should be koxtan in quality including GST and Installation charges | - | Each | - | - |
| 2 | Providing,designing and Fixing of SEE SAW fabricated with main post of 114 mm dia and 3mm thick and other pipes of 40mm dia 3mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120mm micron thick using Akzo Nobel or equipment in desired shade and colour. all welding joints of pipes shall be robotic welded with joint scalloped as necessary and dressed off removing sharp edges and burrs . Zinc primer paint to be applied at all welding points prior to finishing. Base plate cover shall be made up of version LLDPE plastic by rotational moulding with minimum 4mm thickness UV resident and colour as approved by engineer in charge. High quality grip rubber should be used on handles. Foot hold shall be made of nylon alloy with rounded edge to prevent impact and injury. Maintenance free bearing should be used in equipment manufactured by reputed compony douly sealed and self lubricated to be approved by engineer in charge. Equipment to be fitted with in built limiters. The equipment should be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and when concrete is set Fixing the equipment on to it and cover nuts and bolts. th the equipment should be koxtan in quality | - | Each | - | - |
| 3 | Supply and Erection of 1-HP Submersible Pump with Starter, copper wire (2.5 mm 3 core) including Bore and Pipes as per requirement of site to complete the work in all respect up to entire satisfaction of engineer-in- charge. (Make: - Crompton| Jindal| V-Guard |) | - | Each | - | - |
| 4 | Pull and Power Push Chair:- Providing, designing and fixing of Pull pair of size 2500 X 800 X 2000 mm fabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.. | - | Each | - | - |
| 5 | Triple Twister :- Providing, designing and fixing Twister of size 1700 X 1300 X 1300 mm fabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.. | - | Each | - | - |
| 6 | Dual Sky Stepper or Double Cross Walker :- Providing, designing and fixing Double Cross Walker of size 1600 X 600 X 1600 mm fabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc... | - | Each | - | - |
| 7 | Providing and fixing of a Garden Hut- Octagonal One Side Length 9` Outer Side Hight 8` Center Hight 11` Complete with Bench..... | - | Each | - | - |
| 8 | Chain Swing Jhulla- (Two sheater) (10’ height) x (8’ width) with Bearing along with 2” dia M.S. pipe length and top 48’ 1.25” pipe and support 7’ with Chain and hook etc. along with Bearing and bracket Top box of M.S. sheet and 4 Nos M.S. sheet of Patti seat for children with coat paint of Berger paint (painting charges) Bottom hole fast 4 Nos. 1” round axle for bearing 2 Nos...... | - | Each | - | - |
| 9 | Multiplay Station jhula with size 27*15*13ft with 1 Nos climber/Height Gainer, 2 Nos Canopy of 4mm thick, 6.5 ft long Spiral Slider of 6mm thick, 10 ft long Wave Slider of 6mm thick, Tunnel 5 ft long of 4mm thick Etc. with 3” sq. pipe, 1.6” sq. pipe, 3”*1” sq. pipe, 8mm chain with two Nos Chain Swing Sheat Jhula with 2 Nos. Sq. Doom.......... | - | Each | - | - |
| 10 | EARTH FILLING LEAD UP TO 10 KM INCLUDING LOADING UNLOADING | 1 | cum | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.00 MB
BOQ_600964.xls
BOQ • 0.36 MB
AD0159240.pdf
Additional Documents • 0.81 MB
PDF.pdf
PDF • 0.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .