Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.3 LAdmitted-Finance | L1 | Admitted-Finance |
Tender Value
₹1.9 L
EMD Value
₹4,000
Closing Date
22 Sept 2026, 6:00 pmClosed
Executive Engineer PWD Division Sri Ganganagar
Executive Engineer PWD Division Sri Ganganagar
Repair and Maintenance work of JR-II/II residence Sri Ganganagar
2026_CEPWD_598720_14
NIT11_EE_SGNR_26
Open Tender
Civil Works - Buildings
Percentage
30 days
Sri Ganganagar
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Through Challan DDO Code 10566
₹4,000
Yes
23 Sept 2026
19 Sept 2026
23 Sept 2026
19 Sept 2026
22 Sept 2026
19 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches by sandla/loi. (only for colour changing ). | 1,200 | Sqm | 8 | ₹9,600 |
| 1.01 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. | 1,200 | Sqm | 88 | ₹1,05,600 |
| 1.02 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :One or more coats on old work.One or more coats on old work. | 174.24 | Sqm | 37 | ₹6,446.88 |
| 1.03 | Providing and fixing superior quality PVC Tank Cover complete as per approved by Engineer In Charge | 4 | Each | 298 | ₹1,192 |
| 1.04 | P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors: | 6 | Rmt | 334 | ₹2,004 |
| 1.05 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead :
With cement mortar 1 :4 ( 1 cement : 4 coarse sand) | 15 | Sqm | 259 | ₹3,885 |
| 1.06 | Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately).Anodised aluminum (anodised transparent 81 dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC 15, Anodizing to be got done from approved Anodizer) | 18 | kg | 391 | ₹7,038 |
| 1.07 | Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin ,of approved brand and manufacture in paneling fixed in aluminium doors ,windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. | 8.82 | Sqm | 1,133 | ₹9,993.06 |
| 1.08 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' 30 mm thick Commercial Veneer both side. | 8.9 | Sqm | 2,025 | ₹18,022.5 |
| 1.09 | PTMT Ball Cock 15mm Complete with Epoxy Coated Aluminium Road & H.D. Ball | 4 | Each | 350 | ₹1,400 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 8.07 MB
BID.pdf
Tender Documents • 20.63 MB
BOQ_1061978.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .