Construction of Roads and Drains in Kh. No.-4711/2370 Etc. in Revenue Village Bhuwana. 4803

Item Code [2022 11.4]:Item Type [building] :: Providing and fixing 50mm thick cement concrete flooring with Metallic concrete hardener topping, under layer of 38mm thick cement concrete 1:2:4 (1-cement : 2-coarse sand : 4- graded stone aggregate 20mm thick nominal size) and top layer of 12mm thick metallic concrete hardener consisting of mix 1:2 (1 cement : 2 stone aggregate, 6mm nominal size) by volume & mixed with metallic hardening compound of approved quality @ 2Kg./Sqm including cement slurry, rounding off edges etc. but excluding the cost of nosing of step etc. complete

Item Code [2022 3.1.2]:Item Type [building] :: Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level.M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).

Item Code [2022 3.1.4 M10]:Item Type [building] :: Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Item Code [2022 4.9 new]:Item Type [building] :: Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc

Item Code [2022 5.2 (iii) Tack Coat]:Item Type [road] :: Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 50

Item Code [2025 5.8 type A ii]:Item Type [road] :: Providing, laying and rolling of close- graded premix surfacing material of 20mm thickness composed of 11.2 mm to 0.9mm (Type-A) or 13.2 mm to 0.9mm (Type-B) aggregates using Viscosity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base ,including mixing in a suitable plant,laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per MoRTH Specification Clause 508 By Mechanical Means Type A Bitumen (VG-30)

Item Code [BSR-2025 WMM 4.6]:Item Type [road] :: Providing, laying ,spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill),carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel rollerof80to100 kN weight to achieve the desired density including lighting ,barricading and maintenance of diversion,etcasperTables400-12&400-13andMoRTH Specification clause 406 By Mechanical Means with all lead .

Item Code [building 2022 1.2]:Item Type [building] :: Earth work in rough excavation banking excavted earth in layers not exceeding 20 cm in depth breaking clods watering rolling each layer with V2 tonne roller, or stone or steel rammers and rolling every 3rd and top-most layer with power roller of minimum 8-10 tone capacity and dressing up in embankment for roads, flood banks marginal banks and guide banks or filling up ground depressions, lead unto 50 mtr. And lift up to 1.5 Mtr All kind of soil

Item Code [PWD bsr 2025 Bituminous Macadam 5.3 (I) ]:Item Type [road] :: Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per MoRTH Specification Clause 504. Bitumen(VG-10)

Item Code [Rd-2025 prime coat 5.1.1]:Item Type [road] :: Providing and applying primer coat with bitumen emulsion (SS-1)on prepared surface of granular base (WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg / sqm using mechanical means as per MoRTH Specification Clause 502