Establishing and commissioning of 11 Kv/ 200 KvA New Substation

Amount

11 K.V. A.B Cmposite polymer disc Insulators make - Mahalakshmi/atlas or equivelent

11 K.V Polymer pin insulator Make - Mahalakshmi/Atlas of equivalent

11 K.V Strain hardware (T&C) type fittin Make - Mahalakshmi/atlas or equivalent

11 K.V top clamp 65 x 65 x 3 mm Angle Type Make Jindal/Tata or equivalent

11 K.V. V cross Arm 65 x 65 x 6 mm Angle Type Make - jindal/Tata Or equivalent

Aluminium Wire conductor Make - Mahalakshmi/atlas or equivalent

Anti climbing device Make - Mahalakshmi/ Atlas or equivalvent

Earthing coil 115 turns of 50 mm dia and 2.5 mtr lead of 4.0 mm G.I. Wire

H beam clamps 65 x 8 mm flat make Jindal/Tata or equivalvent

M.S. Nut bolt Make - T.V.S

Stay clamp 65 x 5 x 8 mm flat make - Mahalakshmi/Atlas or equivalent

Earthing set (DTR Earthing) as per circular No. 1516 dated 17.03.2018

11 K.V AB Switch 400 Amp. with complete Accessories Make - Mahalakshmi/Atlas or equivalent

11 K.V D.O Fuse unit Polymer type Make - Mahalakshmi/Atlas or equivalent

11 K.V. Polymerl ightening arrestor gapless type Make - Mahalakshmi/Atlas or equivalent

Bimetallic clamp distribution transforme bushing Make - Mahalakshmi/Atlas or equivalent

Bimetallic Clamp for Power transformer brass flat size 50 x 50 x 8 mm Make - Mahalakshmi/Atlas or equivalent

D.C. Cross - Arms 8" Channel 100 x 5 x 6 Make - Mahalakshmi/Atlas or equivalent

D.O. Mounting channel 75 x 40 x 6 mm mm Make - Jindal/Tata or equivalent

High precison thred through compositer Meter Up to 150/200 KVA

Transformer clamping set 50 x 50 x 6 mm Angle 460 mm long

XLPE three core unarmoured 150 Sqr mm Aluminium power bunch cable 11 K.V/H.T Make - Polycab/Havells/Finolex

Main distributon M.S. Panel box for substation. * M.S. Panel box powder coated after chemical treatment fabricated with 1.6 Gauge M.S. CRCA Sheet = Rs. 18600.00 * Aluminium bus - bar heavy duty = 1 Job = 75000.00 * M.C.C.B. 250 Amp. 3 Pole DH series 50 K.A. Make - L&T = Rs. 44160.00 * Spider link 250 Amp. = 1 set = 8300.00 * H.R.C. fuse 400 Amp. 6 No. x 2200.00 = 13200.00 * H.R.C. fuse base 400 Amp. 6 No. x 2200.00 = 13200.00 * Panel accessories = 1 job = 3000.00

Substation earthing Material list * 2 inch G.I. Pipe 6 Feet in one earthing pit * 5 inch thick copper plate size 2 feet x 2 feet in one earthing pit * coal 50 kg. in one earthing pit. * salt 50 kg. in one earthing pit. * Earthing pit size 3 x 3 x 6 Earthing chamber size 1 feet x 1 feet

Fibber DTR meter panel box make sintex

Power factor panel box 50 KV A.R complet with all accessories and fitting make - L&T

M.C.C.B. Panel box powder coated after chemical treatment fabricated with 1.6 gauge CRCA M.S. Sheet

M.C.C.B 250 Amp. 3 Pole DH series 50 KA Make - L&T for MCCB Panel box

Spider link 250 Amp. Make - L&T for 400 Amp. MCCB

D.C. Channel M.S. size 100 x 50 mm Heavy duty

95 Sqr mm 3.5 Core Aluminium Armoured power cable make Havells

300 Sqr mm single core unarmoured power calbe Make - Polycab/Havells/finolex

Alunimium lugs 95 mm² Make - dowels

lugs 300 amp alluminium Make - dowels

Transporation and hydra crain charges

H-Beam 13 meter long heavy duty Make - Jindal/Tata or equivalent

Supplying, installing, testing and commissioning of 11/0.433 KV 3 Phase 50 Cycle Oil immersed, naturally cooled, out door type transformer connected delta on H.T. side and star on L.T side hand operated of load, tap changer switch, Above 100 KVA rating and diagram plate, two earthing terminal, lifting lugs,oil level gauge, drain valve with plug, temperature not exceeding 50 degree Centrigrate on load, oil conservator silica gel breather, four unidirectional roller, arcing horns, explosion vent, terminal arrangement bushing on H.V. Side and cable box on LV Side, first filling of oil upto desired level and transformer installing on existing structure with all required materials arrangements as required as per IS specification 200 KVA, 11/433 KV Onan, dyn11, outdoor type, copper wound 3 star, distribution Transformer Make - Awadh Trasformer/tesla transformer/star-delta transformer

Red Oxide Primer for priming of substaion make - Asian/Paints/Nerolac

Substation Alluminium paint Make Asion paints/Nerolac paints/berger paints

RYB fibber slip make dowels

G.I. Strips size 50 mm x 5 mm Heavy duty approved make for earthing ot transforme

Copper strip size 40 mm x 5 mm heavy dut Approved Make for earthing ot transformer

Substation fencing M.S. Jali/M.S Angle

200 K.V.A/11 K.V Transformer RCC Foundation complete.

Concreting of H beam per pole

LABOUR CHARGES FOR ALL WORK

SHANTI ELECTRICALS ENTERPRISES