CONSTRUCTION OF TECHNICAL BUILDING AT CFEES UNDER GE (I) RnD DELHI

Amount

Schedule under Ser No. 2 to 14 are prepriced by MES based on SSR (Pt-II)-2020

Lump sum price worked out by the Contractor for “Building work” as listed in Schedule ‘A’ Section-I

Lump sum price worked out by the Contractor for “Excavation and Earth Work” as listed in Schedule ‘A’ Section-II (Part-I)

Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Section- III (Part-I)

Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Section-IV (Part-I)

Lump sum price worked out by the Contractor for "SEWAGE DISPOSAL” as listed in Schedule ‘A’ Section- V (Part-I)

Lump sum price worked out by the Contractor for "AREA DRAINAGE ” as listed in Schedule ‘A’ Section- VI (Part-I)

Lump sum price worked out by the Contractor for "ROAD/ PATH & CULVERTS ” as listed in Schedule ‘A’ Section- VII (Part-I)

Lump sum price worked out by the Contractor for "EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Section- VIII (Part-I)

Lump sum price worked out by the Contractor for "EXTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Section- IX (Part-I)

Lump sum price worked out by the Contractor for "LIGHTNING CONDUCTOR” as listed in Schedule ‘A’ Section- X (Part-I)

Lump sum price worked out by the Contractor for "FIRE FIGHTING SYSTEM” as listed in Schedule ‘A’ Section- XI (Part-I)

Lump sum price worked out by the Contractor for "FIRE ALARM SYSTEM” as listed in Schedule ‘A’ Section- XII (Part-I)

Lump sum price worked out by the Contractor for "DEMOLITION” as listed in Schedule ‘A’ Section- XVII (Part-I)

SCHEDULE `A' Section-III, PART - II (INTERNAL WATER SUPPLY) (To be quoted by the tenderer)

S&F CP jet spray with tube for single symphonic EWC complete all as specified and directed.

SCHEDULE `A' Section-IV, PART - II (INTERNAL ELECTRIFICATION) (To be quoted by the tenderer)

S & F Wiring for light/ power plug with 4x4 sq mm FRLS PVC insulated copper conductor single core cable in recessed medium class PVC conduit alongwith 2 No 4 sq mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing of TV socket outlet modular plate & switch box including connections etc as required.

S & F Wiring for circuit/ sub main wiring alongwith earth wire with the 4x16sq mm +2x6 sq mm earth wire of FRLS PVC insulated copper conductor single core cable in recessed medium class pvc conduit as required.

Supply and fixing 200 Amps rating 25 KA breaking capacity 4 Pole MCCB with electronic protection unit including connections etc as required.

Supply and fixing 100 Amps rating 16 KA breaking capacity 4 Pole MCCB with electronic protection unit including connections etc as required.

Supplying and fixing 5 amps to 32 amps rating MCB SP 240 volts 10KA C curve miniature circuit breaker suitable for MCB DB complete with connections testing and commissioning etc as required.

Supply & fix exhaust fans iron body AC single phase 230/ 240 V of size 300 mm sweep, 1400 RPM with louver complete all as specified and directed.

Supply and fixing of LED tube light along with fixture 4 feet, 20 Watt LED indoor luminaire complete with LED retrofit T8 polycarbonate tube and making all electric connections with twin core PVC insulated, multistranded copper conductor flexible cable 1.5 sqmm complete all as specified and directed .

Supplying and fixing of telephone socket outlet modular plate & switch box including connections etc as required

Supplying and fixing of 25 mm dia medium class PVC conduit concealed in wall along with accessories including cutting, chases, pinning in the wall and making good the same with cement mortar 1:3 complete all as directed.

S&F IP-43, protection metal double door Vertical TPN -DB 8 way 24 modules inclusive of 200 Amps tinned copper bus bar , common neutral link, earth bar etc, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels suitable for accommodating 100/200 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed on wall as per site requirement including all cutting holes in or through walls, making good to walls, ceiling etc. Note- MCCB 100/200 Amps 4 pole 16/25 KA as incomer will be measured seprately in relevant item.

S&F IP-43 ,MCB DB SPN 12 way ,double door, with 100 amp rated busbar 240 V concealed on wall as directed including all cutting holes in or through walls, making good to walls, ceiling etc. complete all as specified and as directed.

M & L for Earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 6.0 mm as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3, SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection and 20 mm dia medium grade GI pipe for watering purpose, inlcuding funnel, wire mesh, RCC pit with cover excavation, PCC, salt and charcoal etc. complete and connected to earthing test point all as specified or indicated including testing on completion all as specified and as directed.

Supply and fixing of LED tube light along with fixture 2 feet, 10 Watt LED indoor luminaire complete with LED retrofit T8 polycarbonate tube and making all electric connections with twin core PVC insulated, multistranded copper conductor flexible cable 1.5 sqmm complete all as specified and directed .

Supply and fixing LED security light fitting of 45 watts with 32 mm bore GI pipe bend shape not less than 1.2 mtrs 2 nos clamp with nut, bolt washer etc and complete all as specified and directed.

M & L for LED pannel Recess mounted -2'x2' - 36 watts light fitting with heat exchanger unit complete including cutting hole of required size in POP/false ceiling complete all as specified and as directed.

Supply and fixing PVC trunking of size 50 mm x 50 mm ISI marked on the wall /recess complete with all accessories and cutting complete all as specified and directed by Engr-in-Charge.

Supplying and installing of size 200 mm wide x50 mm depth x 1.6 mm thickness perforated painted with powder coating M.S cable trays with perforation not more than 17.5%, joined with connectors suspended from the ceilling with M S suspenders including bolts & nuts painting suspenders etc as required.

Supplying and fixing single pole and neutral MCB SPN 32 to 40 Amps 240 volts 10KA C curve miniature circuit breaker suitable for MCB DB complete with connections testing and commissioning etc as required.

Supplying, fixing install and testing with ceiling light fittings in each room wireless occupancy sensors (Auto ON/Auto OFF) with suitable controller 230 volts having 360 degree detection angle with this strategy, the sensor automatically turns on the lights when someone enter the space and turns off the lights after a user designated time period if no moments is detected complete all as directed.

SCHEDULE `A' Section-V, PART -II (SEWAGE DISPOSAL) (To be quoted by the tenderer)

M&L for Double Wall Corrugated (DWCPE) (SN8) 200 mm (ID) diameter Pipes with Integral non-detachable socket as per IS : 16098 laid in trenches complete all specified and directed.

M&L for Double Wall Corrugated (DWCPE) (SN8) 300 mm (ID) diameter Pipes with Integral non-detachable socket as per IS : 16098 laid in trenches complete all specified and directed.

Making connection of drain or sewer line for pipes 250 to 300 mm diameter with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete all as directed.

SCHEDULE `A' Section-VII, PART - II (ROAD/PATH & CULVERTS) (To be quoted by the tenderer)

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.

M & L Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density with material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-3, complete as per specifications and directions of Engineer-in-Charge.

Supplying & laying 400 micron thick HDPE sheet (Virgin quality) waterproof wrinkle free without puncture having minimum weight 390 gm per Sqm over tack coat/ sand cushion as specified in the design with overlap between adjacent strips and at transverse joints as minimum 300mm.

Providing and laying design mix cement concrete of M-30 grade with Cement concrete prepared with batch mixing machine, in roads, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture including brooming, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction/ dummy & longitudinal joints by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).

M&L for forming 20mm thick expansion joints cutting upto full depth of wearing course filled with filler board, baker rod and top 30mm primed and sealed with sealing compound PU sealant (for ceiling of joints in roads) all as per manufacturer instructions complete all as specified and as directed,

M & L forming 10mm wide 50mm deep dummy construction joints and longitudinal filled with baker rod and top 30mm primed and sealed with sealing compound PU sealant (for ceiling of joints in roads) all as per manufacturer instructions complete all as specified and as directed.

Providing and laying factory made chamfered edge Cement Concrete 80 mm thick paver block of M-40 grade with approved color design and pattern in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over & including 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

SCHEDULE `A' Section-VIII, PART - II (EXTERNAL WATER SUPPLY) (To be quoted by the tenderer)

Supply and fixed swing type single disk cast iron foot valve (IS:4038) with screwed ends size 100mm bore, for iron pipe complete all as specified and directed.

Supply, installation, connecting and testing swing check type reflex valves (Non return) cast iron body class PN 1.0 design with flanged ends drilled suitable for the size 80 mm. Bore of pipes ISI marked (IS:5312:2004 part-1) complete with nuts bolts washers rubber gasket etc all as specified and directed.

M&L for earth work and cutting cast iron GI water mains pipes for tapping and reducing to required length in position for insrtion of tees for branch connections of the internal dia pipe incluing supply and fixing new tees upto 150x150x80mm of cooler double side end socket and one side end flanged of using required lead joint etc all as specified and directed by Eng-in-Charge.

M & L for Construction of brick masonry valve pit of size 950mmx950mmx750mm (Type 'B') (internal dimensions ) of chamber, depth of chamber to be reckoned from the top of PCC in foundation to top of MS cover and including MS sheet cover fabricated from 3.15mm thick MS sheet and frame of angle iron 50x50x6mm with fixing arrangement, hinges and looking arrangement and painting two coats of synthetic enamel paint over a coat of red oxide on MS cover and frame including necessary excavation earth work in any type of soil returning, filling in, disposal of surplus soil, PCC (1:2:4) work, complete all as specified .

Supplying, installation, commissioning & testing electric driven mono block centrifugal pumping set having discharge 900 LPM at 36 mtr head, with bronze impeller and SS shaft with electric motor 3 phase, 415 volt AC of suitable capacity but not less than 10 HP mounted on common base plate / MS channel and PCC foundation of suitable size as per manufacturer recommondation and 400mm all around including jointing with delevery & suction with required Jointing material all as speedfied and directed.

SCHEDULE `A' Section-IX, PART - II (EXTERNAL ELECTRIFICATION) (To be quoted by the tenderer)

Supply, installed, testing and commissioning of 11 KV outdoor type both side- extendible 3 way ring main unit floor mounted with internal copper bus bars, consisting of 3 nos fixed type motorised vacuum circuit breaker ( 1 incoming & 2 outgoing). All live parts, bus bar VCBs connections of RMU should be enclosed in one tank to avoid multiple interconnections & sealed for life robotically welded non magnetic and non ferrite grade stainless steel tank grade 304 of minimum 2.5 mm thick having IP 67 degree of protection filled with SF6 gas as insulation with leakage rate less than 0.1% per year tested as per IEC 62271-200. The unit shall have front cable entry for ease of installation and shall have site replaceable bushing for ease of troubleshooting during break down. RMU should be complete with all accessories such as terminal kits suitable for 3C x 120 sq mm cable, VPIS, cable supports, all front cable terminations, mechanical indications for load break switch ON/OFF, Altitude of installation up to Bushing bolted type top mounted out side the tank for connection of external bus bar. The unit shall include the following with all necessary standard fitting required at site. Each VACUM CIRCUIT BREAKER of RMU 630 A VCB module for making & breaking of fault current along with earth switch of full making cap- 1 Nos. motor operated 630 A vacuum circuit breaker having spring stored mechanism. Three position disconnection/earthing switch down stream vacuum circuit- breaker. Three position single spring mechanism for disconnector/earthing switch Live cable LED indicators through capacitor voltage deviders mounted on the bushings. Short time breaking current-21 ka/3 sec making capacity-52.5 ka auxillary contacts-1 No+1 NC power frequency withstand voltage-38 kv impulse withstand voltage-95 kv nominal operating gas presure- 1.4 bar abs.

Front cover mechanism- IP 2X. Cable covers-3x green(ON)/Red(OFF) push buttons to operated VCB.30/C+1E/F aux powered (24V DC) numerical protection relay with low and high set for over current and earth fault. Auxillary relays for OTI, WTI, bucholz- alarm & trip for outgoing VCBs 1xlockout relays(86)for transformer protection scheme 1x6/8 window alarm annunciator, Multifuntion meter (secure/L&T) RMU gas tank should be tested for an internal arc fault of 21 ka for 1 sec resin cast ring core protection CT on cables 100-50/1A, 5P10, 5P10, 2.5 VA-3 nos. Resin cast ring core metering CT on cable 100-50/1A, CI-1.0, 2.5 VA-3 Nos mechanical ON/OFF/Earth/spring charge indication cable boxes should be arc proof interlocked with respective earthing switches. Bus connected equipment/metering cubicle consisting of following:- (i) 3 Nos single phase PTs-11kv/v3/110/v3, cl-1.0, 50 VA (ii) 1 No single phase Aux PTs-11kv/230v, 250VA (iii) space heater with thermostat, terminal blocks, Battery charger-minimun-12AH cap, 24 volt DC, Input voltage of 230 VAC from Aux PT hooter complete.

Supply, installation commissioning and testing of oil cooled, copper wound, step down BIS marked & BEE star labelled - II transformer of capacity 800 KVA plinth/floor mounted indoor type with latest feature complete with standard fitted HT 11 KV 3 phase , LT 433 volt 3 phase 4 wire , 50 c/s oil immersed naturally cooled externally cooling tube core type. delta connection on primary HT 11 kv side and star connection on secondary LT 433 volt with tapping at +/- 2.5%, +/-5% & +/- 7.5 % on HV side The transformer shall confirm with the requirement of IS -2026 and oil shall confirm to IS-335, 1983. The temp rise shall not exceed 55 degre centrigade in winding and 45 degree centrigade in oil when measured by the resistance method after continous full load run and on ambient temp of 48 degree centrigrade copper wound, (losses shall be as per IS-1180 part I 2014 level 3). a) HV bushing of suitable size. b) LV glands and cable box of suitable size. c) oil conservator. d) Dehydrating breather with first fill of dehydrating agent. e) Thermomert pocket with thermometer dial of suitable size. f) Two earthing terminals on tank and tank cover with lugs to suit 32x6mm strip. g) Rating plate. h) Terminal marking plate. i) Oil level gauge. j) Oil drain and filter valve. k) Lifting lugs. l) Four plain rollers. m) Oil filter plug with connection complete. n) Extra bushing for neutral outside the cable box for providing independent earthing. o) Oil filling hole with cap. p) One cable box on LV side with one cable gland suitable for reception of 01 No 3.5 core 630 sq mm LT cable. and to be charged by means of hand operated off load, tap changing gear including first filling of new transformer oil of dielectric strength notless than 55KV with all fitting and accessories such as LT box , HT box with cable gland, Siliica gel, breather, Oil level indicator gauge, drain out valve (oil tank), exhaust vent, air release valve, temp gauge, cast iron wheel pocket etc complete all as specified and directed.

Supply and fixing of high voltage end cable joint kit of size 630 sq mm LT cable with all accessories complete all as specified and directed.

Supply and laying GI pipe light grade (ISI Marked) of size 80 mm for cable protection to be fixed on wall /pole /road crossing with necessary clamps complete all as directed and specified by Engr-in-Charge. Note: - Unit rate quoted is deemed to be inclusive of MS clamps along with nuts/bolts/washers etc. if required to be fixed on pole /wall

M & L for Earthing complete (Generator, Transformer and LT Panel) with Copper earth plate electrode '60cm × 60cm × 3 mm thick, buried 'directly in ground (earth pit not less 'than 2.25 metres deep below normal ground 'level) with top edge of the plate not 'less than 1.5 metres below normal ground level', connected to 'Copper strip 25x5 mm by means of bolts, nuts, check 'nuts and washers of copper earth strip protected by provision of GI 'medium grade' pipe 40mm bore including provision of concrete pit in PCC (1:2:4) type B1 (using 20mm graded stone aggregate) with 40mm thick cover in RCC (1:2:4) type B-1 reinforced with XPM (weight not less than 4 kg/sqm) and frame made out in MS angle iron of size 25x25x3mm with lugs 02 Nos and with MS handle made in 6mm dia round bar made to shape, including GI 'medium grade' 20mm bore pipe for watering, perforated at bottom 1.75m long placed on top edge of earth plate including provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate, test point made out of Phosphorus bronze with fixing arrangement ,funnel, wire mesh and including earth work in hard/dense soil returning filling in and removal of surplus soil to a distance not exceeding 50mtr all as shown in electrical plate connected to earthing test point all as specified or indicated 'including testing on completion.NOTE:-Copper strip and GI pipe 40 mm bore medium grade for encasing Copper strip upto 7.50m length per earthing shall be deemed to be included in the unit rate.

Providing and fixing 25mm x 5mm copper strip in 40 mm dia GI pipe from earth electrode including connection with brass nut bolt spring washer excavation and re-filling etc as required strip on surface or in recess for connections etc as required.

Supply and fixing of high voltage end cable joint kit of size 120 sq mm HT cable with all accessories complete all as specified and directed.

Supply, installing, testing and commissioning double door panel openable both side factory made and tested LT panel Indoor type approx size 1500 mm x 800 mm x 2500 mm for main panel platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated electrolytic copper bus bars TPN of capacity 2400 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be compartment wise for each switch gears ,dust and vermin proof, and inner sheet made out of 2.00 mm thick CRCA mild steel sheet and mild steel Mounting Channel frame work made out of MS angle iron 75X40 mm duly coated with zinc metal coating, front opening type for installation of separate cable alloy, busbar chamber and switchgear compartments. Provision in cable alloy to be kept for bottom cable entry for incoming and outgoing cables. A clear space of 200 mm to be kept from floor level for switchgear compartment. Extended busbar links/ terminals, Air ventilation breathers to be provided for heat dissipation. Suitable size knock-out holes for cables, gland shall be provided as per respective schematic drg of the following equipments/ instruments. Each compartment shall be numbered/ letterd as per the approved drg. Affixing Danger plate as suitable intervals/ location, panel board compartment size should be suitable to accomodate the switchgear and other accessories as per IE rules, including proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLSH cable of adequate size but not less than 2.5 sqmm complete. All steel metal works including frame shall be painted with anticorrosive coating with seven tank process and finally epoxy based. Note- All incoming and out going ACBs/MCCBs with connected switchgears is included in the item and no extra payment on this account will be admissible.

BUS BAR CHAMBER (a) 2400 Amps 3 phase & half for Neutral , copper conductor E-91 grade, with color coded heat shrinkable sleave and shall be mounted on, non combustible, track resistant, high strength DMC material, interconnection of all incomings & outgoings. INSTRUMENT CHAMBER (i) Digital Multi Function Meter with LED display for Voltage, current, frequency, Power Factor, 3 Phase - 01 Set. (ii) C.T's of capacity 400/5 A Cl 1.0 - 01 Set. ( Set of three ) (iii) Red, Yellow, Green Phase indicating Lights LED type 220 V 50 Hz - 1 Set of three. (iv) Suitable Protection MCB C Series- 1 ( Set of three ). INCOMING SUPPLY (i) ACB 1600 Amps, 4 Pole, 50 KA,415 V, Electrically Drawout Type (EDO type) -01 OUTGOING SUPPLY (i) ACB 1250 Amps, 4 Pole, 50 KA ,Electrically Drawout Type (EDO type) 415 volts, 50Hz, ICS=100%ICU = 01 No. (ii) ACB 800 Amps, 4 Pole, 50 KA, Electrically Drawout Type (EDO type 415 volts, 50Hz, ICS=100%ICU = 02 No. (iii) MCCB 630 Amps, 50 KA, 4 Pole, C Curve 220 volts, 50Hz, Electronic protection Unit = 01 Nos (iv) MCCB 250 Amps, 25 KA, 4 Pole, C Curve 220 volts, 50Hz, Electronic protection Unit = 02 Nos. (v) On load change over switch ATC (Automatic Transfer Controller) for motorised changeover of cap 1250 amps = 01 No.

Supply, installing, testing and commissioning double door panel openable both side factory made and tested LT panel Indoor type approx size 1200 mm x 800 mm x 2100 mm for power panel platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated electrolytic copper bus bars TPN of capacity 1200 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be compartment wise for each switch gears ,dust and vermin proof, and inner sheet made out of 2.00 mm thick CRCA mild steel sheet and mild steel Mounting Channel frame work made out of MS angle iron 75X40 mm duly coated with zinc metal coating, front opening type for installation of separate cable alloy, busbar chamber and switchgear compartments. Provision in cable alloy to be kept for bottom cable entry for incoming and outgoing cables. A clear space of 200 mm to be kept from floor level for switchgear compartment. Extended busbar links/ terminals, Air ventilation breathers to be provided for heat dissipation. Suitable size knock-out holes for cables, gland shall be provided as per respective schematic drg of the following equipments/ instruments. Each compartment shall be numbered/ letterd as per the approved drg. Affixing Danger plate as suitable intervals/ location, panel board compartment size should be suitable to accomodate the switchgear and other accessories as per IE rules, including proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLSH cable of adequate size but not less than 2.5 sqmm complete. All steel metal works including frame shall be painted with anticorrosive coating with seven tank process and finally epoxy based. Note- All incoming and out going ACBs/MCCBs with connected switchgears is included in the item and no extra payment on this account will be admissible.

BUS BAR CHAMBER:- (a) 1200 Amps 3 phase & half for Neutral , copper conductor E-91 grade, with color coded heat shrinkable sleave and shall be mounted on, non combustible, track resistant, high strength DMC material, interconnection of all incomings & outgoings. INSTRUMENT CHAMBER:- (i) Digital Multi Function Meter with LED display for measurement of Voltage, current, frequency, Power Factor, 3 Phase - 01 Set. (ii) C.T's of capacity 400/5 A Cl 1.0 - 01 Set. ( Set of three ) (iii) Red, Yellow, Green Phase indicating Lights LED type 220 V 50 Hz - 1 Set. ( Set of three). (iv) Suitable Protection MCB C Series- 1 Set. ( Set of three ). INCOMING SUPPLY:- (i) ACB 800 Amps, 4 Pole, 50 KA ,Electrically Drawout Type (EDO type) 415 volts, 50Hz, ICS=100%ICU = 01 No. OUTGOING SUPPLY :- (i) MCCB 400 Amps, 36 KA, 4 Pole, 415 volts, 50Hz, Electronic protection Unit ICS=100%ICU = 03 Nos., (ii) MCCB 100 Amps, 25 KA, 4 Pole, C Curve 220 volts, 50Hz, Electronic protection Unit = 03 Nos.

Supply, installing, testing and commissioning double door panel openable both side factory made and tested LT panel Indoor type approx size 1200 mm x 800 mm x 2000 mm for Building distribution panel platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated electrolytic copper bus bars TPN of capacity 1200 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be compartment wise for each switch gears ,dust and vermin proof, and inner sheet made out of 2.00 mm thick CRCA mild steel sheet and mild steel Mounting Channel frame work made out of MS angle iron 75X40 mm duly coated with zinc metal coating, front opening type for installation of separate cable alloy, busbar chamber and switchgear compartments. Provision in cable alloy to be kept for bottom cable entry for incoming and outgoing cables. A clear space of 200 mm to be kept from floor level for switchgear compartment. Extended busbar links/ terminals, Air ventilation breathers to be provided for heat dissipation. Suitable size knock-out holes for cables, gland shall be provided as per respective schematic drg of the following equipments/ instruments. Each compartment shall be numbered/ letterd as per the approved drg. Affixing Danger plate as suitable intervals/ location, panel board compartment size should be suitable to accomodate the switchgear and other accessories as per IE rules, including proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLSH cable of adequate size but not less than 2.5 sqmm complete. All steel metal works including frame shall be painted with anticorrosive coating with seven tank process and finally epoxy based. Note- All incoming and out going ACBs/MCCBs with connected switchgears is included in the item and no extra payment on this account will be admissible.

BUS BAR CHAMBER:- (a) 1200 Amps 3 phase & half for Neutral , copper conductor E-91 grade, with color coded heat shrinkable sleave and shall be mounted on, non combustible, track resistant, high strength DMC material, interconnection of all incomings & outgoings. INSTRUMENT CHAMBER:- (i) Digital Multi Function Meter with LED display for measurement of Voltage, current, frequency, Power Factor, 3 Phase - 01 Set. (ii) C.T's of capacity 400/5 A Cl 1.0 - 01 Set. ( Set of three ). (iii) Red, Yellow, Green Phase indicating Lights LED type 220 V 50 Hz - 1 Set. (Set of three). (iv) Suitable Protection MCB C Series- 1 Set. ( Set of three). INCOMING SUPPLY:- (i) ACB 800 Amps, 4 Pole, 50 KA, Electrically Drawout Type (EDO type ) 415 volts, 50Hz, ICS=100%ICU = 01 No.,. OUTGOING SUPPLY :- (i) MCCB 400 Amps, 36 KA, 4 Pole, 415 volts, 50Hz, Electronic protection Unit ICS=100%ICU = 03 Nos. (ii) MCCB 100 Amps, 25 KA, 4 Pole, C Curve 220 volts, 50Hz, Electronic protection Unit = 03 Nos.

Supply, installing, testing and commissioning indoor type factory made Automatic Power Factor Correction (APFC) panel approx size 2100 mm x 800 mm x1500 mm Micro processor based power factor correction system of aggregate capacity: 350 KVAR in 8 steps having auto switching system for each stage in the form of electro magnetic making and breaking of contracts, as per varying load sensed by the microprossesor Electro magnetic switching system used for energizing each capacitor stage should have the carrying capacity not less than 1.5 times the charging current of the respective stage, Each switching stage shall carry a back up protection in the form of triple pole MCCB of rating not less than 2 times the charging current of individual stage, platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated electrolytic Copper bus bars TPN of capacity 800 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be compartment wise for each switch gears ,dust and vermin proof, and inner sheet made out of 2.00 mm thick CRCA mild steel sheet and mild steel Mounting Channel frame work made out of MS angle iron 75X40 mm duly coated with zinc metal coating, front opening type for installation of separate cable alloy, busbar chamber and switchgear compartments. Provision in cable alloy to be kept for bottom cable entry for incoming and outgoing cables. A clear space of 200 mm to be kept from floor level for switchgear compartment. Extended busbar links/ terminals, Air ventilation breathers to be provided for heat dissipation. Suitable size knock-out holes for cables, gland shall be provided as per respective schematic drg of the following equipments/ instruments. Each compartment shall be numbered/ letterd as per the approved drg. Thermostat Control Axial Fan of suitable size two nos to be provided for disipating of heat from the panel. Affixing Danger plate as suitable intervals/ location, panel board compartment size should be suitable to accomodate the switchgear and other accessories as per IE rules, and mild steel Angle iron frame work made out of 50 X 50 X 6 mm, double door type front and back opening type with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size but not less than 2.5 sqmm complete. All steel metal works including frame shall be with painted anticorrosive coating with seven tank process and finally epoxy polyster powder coating of Siemens grey RAL-7035 shade complete all as specified and as directed.

SCHEDULE `A' Section-X, PART - II (LIGHTENING CONDUCTOR) (To be quoted by the tenderer)

Supply and fix single pointed air termination aluminium rod, 12mm dia, 300mm long GI tube having single prong at top, with 85 mm dia 6 mm thick GI base plate including holes etc complete as speciied and as directed.

Supply and fix aluminium strip 20X3 mm thick on parapet , roof / surface of walls for earth continuity conductor including fixing arrangement complete all as speciied and as directed (For vertical / Horizontal).

M & L for Earthing complete for lightning arrestor with GI earth plate electrode '60cm × 60cm × 6 mm thick, buried 'directly in ground (earth pit not less 'than 2.25 metres deep below normal ground 'level) with top edge of the plate not 'less than 1.5 metres below normal ground level', connected to 'GI strip 32x6 mm by means of bolts, nuts, check 'nuts and washers protected by provision of GI 'medium grade' pipe 40mm bore including provision of concrete pit in PCC (1:2:4) type B1 (using 20mm graded stone aggregate) with 40mm thick cover in RCC (1:2:4) type B-1 reinforced with XPM (weight not less than 4 kg/sqm) and frame made out in MS angle iron of size 25x25x3mm with lugs 02 Nos and with MS handle made in 6mm dia round bar made to shape, including GI 'medium grade' 20mm bore pipe for watering, perforated at bottom 1.75m long placed on top edge of earth plate including including provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate, test point made out of Phosphorus bronze with fixing arrangement ,funnel, wire mesh and earth work in hard/dense soil returning filling in and removal of surplus soil to a distance not exceeding 50mtr all as shown in electrical plate connected to earthing test point all as specified or indicated 'including testing on completion.NOTE:-GI strip 32x6 mm and GI pipe 40 mm bore medium grade for encasing GI strip upto 7.50m length per earthing shall be deemed to be included in the unit rate.

SCHEDULE `A' Section-XI, PART - II (FIRE FIGHTING SYSTEM) (To be quoted by the tenderer)

Supply and fixing single headed internal hydrant valve with instantaneous stainless steel coupling of 63mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A ) with blank Stainless steel cap and chain as required

S&F SS (Stainless Steel) double head landing valve with 80 mm nominal bore flanged inlet, SS spindle (IS : 6603) controlled 63 mm dia instantaneous female outlet type. SS coupling, blank cap, chain, twist release type lug & all accessories conforming to IS:5290. Including fixing with anchor fastener and flanged tapping from wet riser complete all as specified and directed.

S&F Non-percolating rubber reinforced lined fire hose pipe (as per IS : 636) Type-A of 63 mm dia and length as described below. The hose shall be rated for burst pressure of 35.7 Kg/Sqcm. Hose shall be complete with ISI marked SS male & female coupling (IS:903) bound & riveted to hose pipe with aluminum rivets & 1.5 mm GI wire. (For Internal Hydrant & External Hydrant) complete all as specified & directed.

S&F Cast Iron Air Valves with single air Outlets, conforming to IS - 14845 of size 100 mm dia bore and fixing up in Cast Iron Water supply mains of size 100 mm dia complete all as specified & directed.

Supply and fixing first aid hose reel 40mtr with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required: 20mm nominal internal dia water hose thermoplastic (Textile reinforced ) type-2 as per IS : 12585, 20mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipments on wall. Connections from riser with 25mm dia stop gun metal valve and MS pipe and socket.

S&F Pressure gauge 4"dial 0-14 kgs rating complete all as specified & directed.

M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 0.4 mpa working pressure for 150 mm dia MS pipe complete all as specified & directed. .

OUTGOINGS :- Star Delta Starter 50 HP Each having the following :- 2 Nos. ( Main Pump ) (a) MCCB 125 A 25 KA 3 Pole Thermal Magnetic- 01 No (b) Contactor 70 A TP (Main & Delta) - 02 Nos (c) Contactor 50 A TP (Star) - 01 No. (d) B1 Metal Over Load relay 30-50 A - 01 No. (e) Star delta timer Micon Series - 01 No. (f) Digital Amp Meter (0-100A) - 01 No. (g) CT 100/5A - 01 No. (h) Single Phase Preventer - 01 No. (i) Push button Start/Stop with Elements - 02 Nos, (j) On, Off, Trip indicating Lights LED type 220 V AC- 1 Set. (Set of three). (k) Aux. Blocks 1 No+1 Nc - 1 Set. Star Delta Starter 7.5 HP Each having the following :- 1 No. ( Jockey Pump) (a) MCB 32 A 10 KA 3 Pole C Curve- 01 No (b) Contactor 18 A TP (Main & Delta) - 02 Nos (c) Contactor 12 A TP (Star) - 01 No. (d) B1 Metal Over Load relay 6-10 A - 01 No. (e) Star delta timer Micon Series - 01 No. (f) Digital Amp Meter (0-30A) - 01 No. (g) CT 30/5A - 01 No. (h) Single Phase Preventer - 01 No. (i) Push button Start/Stop with Elements - 02 Nos, (j) On, Off, Trip indicating Lights LED type 220 V AC- 1 Set. (Set of three). (k) Aux. Blocks 1 No+1 Nc - 1 Set. Notes : 1. Provison for Auto/Manual Mode incase of Auto failure with solenoid switch 2. Control circuit for Pressure Maintain via Pressure Switch

Supplying, installation, testing and commissioning of electric driven pressurisation pump of capacity 180 Ipm at 56 m Head pressure not less than 3.5 kg/sq cm at the top most hydrant suitable for fire fighting and conforming to IS 12469-1988 suitable for automatic operation and consisting of following, complete in all respects, as required: (Jockey Pump) (B) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS: 1520.(C) Suitable HP squirell cage induction motor TEFC type suitable for protection for enclosure, horizontal foot mounted type with Class-F operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of insulation, conforming to IS:325. (D) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (E) Suitable cement concrete foundation duly plastered and with anti vibration pads.

Supply, installation, testing and commissioning Terrace pump of 450 LPM capacity at 35 mtrs head pressure not less than 3.5 kg/sq cm at the top most hydrant suitable for fire fighting and conforming to IS 12469-1988 complete with totally enclosed drip proof squirrel cage induction motor TEFC type with bronze impellers, pressure guage , pressure switch complete to operate on 3 phase, 415 volts, 50 Hz complete including PCC foundation block and making connection with tail and taper pieces to supply and delivery pipes including pipes and also including fabricated MS common base phase of suitable size coupling guard air vent for casting pressure guages on delivery side and pipes etc

M&L for PVC insulated copper conductor flat submersible cable 1100 volts grade of 10 Sqmm 3 core size drawn through PVC conduit fixed on wall with all accessories to connect tarrace pump complete all as specified and as directed.

Supply and fixing of hose box (cabinet) of size 900x900x600mm indoor type made out of 2mm thick MS Sheet with ceter opening glazed doors (4mm thick clear glass) and locking arrangement including painted with to coats of synthetic enamlled paint over a coat of red oxide primer and the word " FIRE" to painted on box, suitable for housing 2 Nos hose pipe of length 15 mtrs each with branch pipe,nozzle,coupling etc all as specified and directed.

Supply and fix cast iron air release valve with single air outlet confirming to IS 4845 of size 20 mm dia bors and fixing up in MS pipe 100 mm bore complete set , all as specified and directed.

Supply and fixing first aid hose reel 30m with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required: 20mm nominal internal dia water hose thermoplastic (Textile reinforced ) type-2 as per IS : 12585 20mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipments on wall. Connections from riser with 25mm dia stop gun metal valve and MS pipe and socket.

SCHEDULE `A' Section-XII, PART - II (FIRE ALARM SYSTEM) (To be quoted by the tenderer)

M & L sub main wiring for fire control circuit of 1.5 Sqmm 2 Single core copper conductor multistranded PVC insulated and unsheathed cable drawn through and including MS conduit fixed on surface to wall/ ceiling by means of MS screws and saddles connected to MC box, sounder and main control panel as per fire standard all as specified and directed.

Supply, laying & testing PVC insulated, PVC Sheathed cable galvanized steel strip or wire armoured, electric control cable (Heavy duty) with stranded copper conductor of size 4 Core, 4 Sq mm 1100 Volts grade for connection to repeater panel from main panel all as specified and directed.

Supply and fix glow in dark FIRE EXIT sign board with man running arrow symbol and stair of dimension 12" X 6" X 8 mm decorative transparent acralic, including fixing arrangment all as specified and directed complete, all as specified and directed.

Supply and fix pressure gauge 100 mm dia with ball valve of pressure 21 Kg/sqcm complete, all as specified and directed.

Supply and fix branch pipe with nozzle of 20mm dia for hose reel confirming to IS 8090 complete, all as specified and directed.

Supply, Installation, Testing and commissioning of 120 Watt Amplifire complete, all as specified and directed.

Supply & fixing of public Address wire 2 Core in PVC conduit pipe for talk back facility complete, all as specified and directed.

Supply, Installation, Testing and commissioning of Single master and 8 way slave for talk back system complete as required ( Control Room)

Supply and fixing Fire point on wall consisting of: :- (a)Fire Extinguisher Dry Chemical Powder (ABC) Type - 01No (6Kg Capacity) (b) Fire Extinguisher CO2 type (light weight squeeze grip type)-01 No (4.5 Capacity) (c) Fire extinguishers clean agent type 02 Nos (4Kg capacity)complete, all as specified and directed.

Supply and fixing Fire point on wall consisting of: :- (a)Fire Extinguisher Dry Chemical Powder (ABC) Type - 01No (6Kg Capacity) (b) Fire Extinguisher CO2 type (light weight squeeze grip type)-01 No (4.5 Capacity)complete, all as specified and directed.

Supply, installation, testing and commissioning of Response Indicator on surface of ceiling complete as required.

Supplying, installation, testing & commissioning of repeater panel with 320 character/Touch screen LED display with inbuilt reset, acknowledge and silence switches complete as required.

Supply, installation, testing & commissioning of intelligent aspiration detector for area coverage of minimum 5000sq. Ft. complete as required.

Supply, installation, testing and commissioning of addressable phone control module complete as required.

Supply, installation, testing and commissioning of Fault Isolator with base complete as required.

Supply, installation, testing and commissioning of intelligent addressable duct detector including suitable photo detector with base complete as required.

SCHEDULE `A' Section-XIII, PART - II (DG SET) (To be quoted by the tenderer)

Supplying, installing, testing & commissioning of factory assembled silent Diesel Engine driven generating set 1500 RPM of capacity 750 KVA / 600 KW, 3 phase, 4 wire,415 volt, 0.8 PF, complete with control panel including integrated powder coated acoastic enclosure as per CPCB IV+ regulations and duly certified by agencies/labs designated by CPCB for noise and sound pollution level, etc floor mounted including PCC foundation as per manufacturer's instructions complete all as specified and directed and comprising of the following:- (A) DIESEL ENGINE Diesel Engine for required capacity for driving 750 KVA alternator multi cylinder, vertical type, 4 stroke, water cooled, electric start, cold starting conforming to IS : 10001/10002/BS-5514 for continuous running capable of taking 10% overload for one hour in 12 hours complete and comprising of the following :- (i) Radiator cooling (ii) Radiator fan with guard (iii) Flywheel with starter ring (iv) Air cleaner oil bath type (v) Vacuum indicator (vi) Electronic governor (vii) Exhaust silencer (viii) Fuel filter & fuel hoses (ix) Fan & water pump assembly (x) Lub oil filter & Pump (xi) Electric starting system with battery charging alternator and axial type starter motor including adequate number of high capacity maintenance free lead acid battery 12 volts 180 AH DC as per manufacturers requirement including interconnecting cables/leads with terminals complete with starting/stopping switch,etc - 01 Set. (xii) Engine safety shut down system against low lub oil pressure and high water pressure (xiii) Exhaust gas driven turbo charger (xiv) Oil filter

(xv) Lub oil cooler (xvi) Emergency stopping switch outside canopy. (xvii) Suitably designed acoustic enclosure with locking arrangement of doors as per CPCB regulations. (xviii) Suitable pollution control device to reduce air pollution. (B) ENGINE INSTRUMENT PANEL digital type having facility for automatic/manual starting, reset switching with an indicating the following including internal control wiring controlled with MCB & connected to safety features of Engine & Alternator (i) Starting switch on/off (ii) Water temp guage (iii) Hour meter cum RPM indicator (iv) Lub oil pressure (v) Lub oil temperature (vi) Battery charging meter (vii) Safety alarm against high water temp and lub oil pressure (C) ALTERNATOR : Shall be self excited, self regulated, brushless for 750 KVA continuous operation at the speed of 1500 RPM at 415 volts, 50Hz , three phase four wire system with advance electric voltage regulator to ensure high voltage accuracy with ( +/- 1% ) with class H insulation and SPDP enclosure directly coupled with engine through flexible coupling and confirming IS- 13364/4722 or BS-2613 of 1970 complete- 1 No. (D) Common fabricated base frame for engine & alternator made from structural channel, jerk proof PCC 1:2:4 type B1 foundation including adequate number of .suitable anti-vibration pads all as per the recommendation of the manufacture- 01 No (E) Bottom mounted steel fuel tank fabricated out of 14 SWG MS sheet of capacity not less than 8 hrs continuous operation, inside canopy, with fuel level guage, drain plug, locking arrengements, etc with & including GI pipe connections duly laid as per engineering practice complete.

SCHEDULE `A' Section-XIV, PART - II (LIFT) (To be quoted by the tenderer)

k) Driving motor- PMSM( Permanent Magnet Synchronus Motor) l) Electrical safety device- i) Main 3 phase limit switch to protect against over travel. ii) Single phasing preventor with a protection against phase sequence reversal. iii) Full proof gate locks for landing doors. iv) Car gate switch. v) Over speed Governor. f) Over speed safety device m) Signals in car- battery operated emergency light, alarm, digital floor indication, push button for each floor, on/off switch, fan switch, at landing up/down indication, push button, digital car position indication n) Driving rope with factor of safety 12 or avove o) Car ventilation with automatic ON/OFF fan p) LED car lighting q) Levelling accuracy max as per article 10 of IS: 14665:2000, Min +/-12 mm r) Stainless steel sheets tata/Jindal/imported s) Mild steel sheets tata/Jindal/imported and over load features

The following salient features 1) Advanced design a) Specialized buffers b) PLC based lift control c) PLC based lift door operation d) In house manufactured eco friendly gearless machine e) Protection against power fluctuation 2) Safety related a) Door force detector b) Door nuding feature c) Door sensor self- diagnosis d) Electronic doorman e) Extended door-open button for goods lift g) Fire emergency return h) Fire operation j) High accuracy landing feature k) Slotless bottom sills l) Inter communication system m) Elevator monitoring and control system n)Emergency rescue device operated from cabin o) Multi beam door sensor p) Overload holding stop q) Braile on all COP&LOP types r) Motor overheat protection s) CCTV facility to integrate with BMS t) Jammed landing operation panel call button bypass u) Phase failure & phase reversal protection

3) Aesthetics a) Elegant led light ceiling with various choice b) SS round handril c) Full height mirror in car d) Alphanumeric LCD display in landing operting panel e) Alphanumeric LCD display in car operating panel f) Uniform illumination in cabin 4) Cabin a) Attendant service b) Automatic bypass c) Floor announcement with music d) Car arrival chime e) Car fan shut off 5) Energy saving a) Energy saving operation by dimming of LED displays in idle condition b) Very low cabin electricity consumption for lighting 6) Operation a) False call canceling b) Smart door open AI c) LCD position indicator d) Next landing in case of door malfunction using AI e) Out-of-service by hall key switch f) Special floor priority service g) EMS/supervisory panel using IoT j) Door open/ close button in car k) Creepless opertion l) Direct landing at floor

Design supply, install testing & commissioning 8 passengers auto lift gearless machine room less, (544 Kgs) speed 1 metre/sec, lift with single speed motor 415 volts, 3 phase, AC 50 Hz supply conforming to IS 14665, suitable to serve G + 03 floors with AC Variable Voltage & Variable Frequency drive (VVVF drive), rope with factor of safety not less than 12 complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system, 3D infra red sensor in full height of door & built in announcing system without hand set (04 Nos, one each in car, Machine room & near Ground floor landing door), complete all as specified and directed with following :-

(a) Capacity- 8 Passengers (b) Speed- 1mps (c ) Rise- 16 M (approx) (d) Stops- G+3 ,4 opening (e) Controller- Latest Technology Microprocessor based, Duplex, full collective control with or without attendants. (f) Drive- ACVVF- Regenerative ( Closed Loop) (g) Power Supply- 400/415 Volts (3Phase AC) (h) Operation- Full collective Operation (j) Car Group- One Car (Simplex) (k) Machine- Latest technology PM Gearless (l) Hoist Way Required- 1900mm wide x 1900mm deep. (m) Over Head Available/Required- 4800mm . (n) Pit Depth- 1600mm (o) Car Size- 1300mm (W) x 1100mm (D) x 2200 mm(H) (p) Traction Media- Flat Coated Steel Rope (USHA MARTIN) (q) Car Finish- i) Rear Mid Panel = Stainless Steel Honeycomb (1.55mm thickness) ii) Rear Corner Panels = Stainless Steel Honeycomb (1.55mm thickness) iii) Side Panels = Stainless Steel Honeycomb (1.55mm thickness) iv) Front Panels = Stainless Steel HOneycomb (1.55mm thickness)

(r) Car Door Finish- 2 Panel automatic center opening with ACVF drive in stainless steel honeycomb (1mm) (s) Landing Doors- 2Panels automatic center opening Stainless Steel (1.55mm thickness) (t) Flase Ceiling- SS Mirror finish with composite lights (u) Car Door Opening - 800mm (W) x 200mm (H) (v) Door Operation- Automatic Power operating with adjustable door opening and closingtiming and speed) (w) Flooring - Granite 18/20mm Flooring colour black (x) Indicator - Digital Direction and position indicators in both car and at all landings (y) Guide Rails - Tounge and Groove Guide Rails. (z) Handrail - Round Bend Handrail Stainless Steel at Rear Wall (za) Ventilation - Cross Flow Fan "(zb) Option Included - Automatic Rescue Operation, Emergency Rescue Device with audio announcer 2 way Dedicated Intercom Lift Announcer Landing door 60 minutes Fire Rated" "(zc) Car Emergency Light Fireman Drive Curtain of light 169 Beams Accurate Relabeling, Automatic, Closed Door."

Supply and fix UPS with battery for 30 min back up single phase AC input 160 to 260 V and out put 230 ± 1% of capacity 3 KVA complete all as directed.

SCHEDULE `A' Section-XV, PART-II (AIR CONDITIONING WORK) (To be quoted by the tenderer)

Supply, Installation, Testing and Commissioning of AHRI Certified Water Cooled Screw chiller with VFD each having a minimum Actual capacity of 115 TR at chilled water inlet/outlet temperature of 54°F/44°F with chilled water circulation rate of 276 USGPM and condenser water inlet/outlet temperature of 90°F/100°F with water circulation rate of 460 USGPM , suitable for operation on refrigerant R-134a/407c/401A for screw type machine each comprising of the following complete as per specifications and as required. Quoted price shall include price of Variable Frequency Drive starter of suitable capacity (Chiller shall have compressor of same OEM make)(Two working one stand by) a) Mono Screw Rotor based semi-hermetic type single/ multiple horizontal compressor complete with automatic capacity control from 100%-25%, safety switches, forced feed lubrication system etc, as per specifications b) Suitable capacity squirrel cage induction motor with class 'B' insulation suitable for operation on 400+/-10% volts, 50Hz, A.C. supply. c) Unit mounted IP 54 rated VFD Starter of suitable capacity d) Necessary drive arrangement. e) 1 set - Lubrication device consisting of automatic electric oil pump, oil cooler, head tank, oil strainer, and automatic pressure regulating valve, oil heater, oil heater thermal switch etc. as per manufacturer's specifications. f) 1 no. - matching shell and tube type even pass water cooled condenser of M.S. shell and integrally finned copper tubes and pressure drop not exceeding 10 metres as per manufacturer's specifications. g) 1 no. - matching shell & tube flooded/falling film type even water pass chiller for screw type units of MS shell and copper tubes and pressure drop not exceeding 10.0 metres as per manufacturer's Specificaitons. h) Evaporator and condenser shall be manufactured, tested and stamped with ASME(U)/BIS pressure vessel code.

i) 1 Lot - Refrigerant piping fittings, valves and accessories to inter connect compressor, condenser, chiller and expansion valve. j) 1 set - Microprocessor based control panel complete with accessories as per specifications. k) Lot - Refrigerant line accessories comprising of safety valves, angle valve, liquid line indications, liquid level control etc. l) Lot - Water flow switches at outlet of condenser & chiller, water drain, air purge valves, thermometers and pressure gauges wherever required. m) Lot - Suction line and chiller insulation with minimum 19 mm thick polyvinyl nitrile rubber insulation complete as required. n) Lot- Frame work for mounting the above condenser, chiller compressor and motor with base plate complete with anti-vibration pads/springs. o) Lot- Initial/first charge of refrigerant gas & compressor oil shall be factory charged. p) Lot- RCC / cement concrete foundation for the chilling unit. q) Chilling machine described above, as per specifications and complete in all respects for the operating parameters as given under. r) Refrigerant should be R-134a s) At least one Chiller shall be tested at 4 points at 100%, 75%, 50% and 25% at AHRI conditions at manufacturer test bed before despatch.

PUMPING SYSTEM

Chilled Water Pumps S & F Primary constant chilled water pumps Vertical Closed Coupled, Single stage, Single suction, Inline Centrifugal casing, top-pull-out design (i.e, the power head (motor, pump head, and impeller) can be removed for maintanence or service while the pump housing remains in the pipe work), primary chilled water pumps set complete with, Cast iron casing, Lead free bronze impeller, an internally-flushed mechanical seals and close coupled with stainless steel stub shaft arrangement with electric motor for re-circulation of chilled water circulation. The pump motor shall be TEFC squirrel cage induction motor having efficiency class IE3 (as per IEC 60034) with class 'F' insulation, 1500 RPM synchronous speed, operating on 415 V +/- 10%, 3 phase, 50 Hz AC supply. The motor shall be non- overloading type. Pumps will be with performance characteristics as given below. The pump and motor shall be mounted on a common base plate. All external and exposed cast iron parts of pumps should have coating made in a cathodic electro-deposition (CED) process. Pump set shall be complete with thermal insulation same as chilled water pipes, aluminium cladding at suction and discharge, necessary anti vibration pads, MS base plate, and all other accessories complete as required.Pump material and operating conditions are given here under: Type:-Vertical Inline, Close coupled pumps with internally-flushed mechanical seal Casing:-Grey cast iron (EN-GJL-250) Impeller:-Lead free cast Bronze (CuSn10) Flow rate:-276 USGPM Head:-15 Meter Efficiency (min) :-75% Motor rating:-4 kw, 4 pole,IE3 Total Pumps 3 Nos

SECONDARY VARIABLE CHILLED WATER PUMP S & F secondary variable chilled water pump Vertical Closed Coupled, Single stage, Single suction, Inline Centrifugal casing, top-pull-out design (i.e, the power head (motor, pump head, and impeller) can be removed for maintanence or service while the pump housing remains in the pipe work), secondary chilled water pumps set. The pumps shall be compact, single stage, in-line suction and discharge ports of identical diameter with integrated IP 55 VFD. "Pump shall be fitted with a 3-phase, fan-cooled, permanent magnet, synchronous motor. Motor shall Include a frequency converter and PI controller in the motor terminal box. The combined motor and frequency converter efficiency shall be to super-premium efficiency IE5 level. Pump should have Cast iron casing, Lead free bronze impeller, an internally-flushed mechanical seals and close coupled with stainless steel stub shaft arrangement with electric motor for re-circulation of chilled water circulation. Motor shall be a horizontal, totally enclosed fan-cooled, permanent magnet type. Electrical tolerances shall comply with IEC 60034. Motor shall be of super-premium efficiency IE5 level. " All external and exposed cast iron parts of pumps should have an coating made in a cathodic electro-deposition (CED) process. Pump set shall be complete with thermal insulation same as chilled water pipes, aluminium cladding at suction and discharge, necessary anti vibration pads, MS base plate, and all other accessories complete as required.Pump material and operating conditions are given here under: Type Vertical Inline, Close coupled pumps with internally-flushed mechanical seal Casing Gasket - Confined Non Asbestos Fiber Impeller Lead free cast Bronze (CuSn10) Flow rate 276 USGPM and 30 METER head Motor rating 11 Kw, IE5

CONDENSOR WATER PUMP S & F condensor water pump Vertical Closed Coupled, Single stage, Single suction, Inline Centrifugal casing, top-pull-out design (i.e, the power head (motor, pump head, and impeller) can be removed for maintanence or service while the pump housing remains in the pipe work), primary chilled water pumps set complete with, Cast iron casing, Lead free bronze impeller, an internally-flushed mechanical seals and close coupled with stainless steel stub shaft arrangement with electric motor for re-circulation of chilled water circulation. The pump motor shall be TEFC squirrel cage induction motor having efficiency class IE3 (as per IEC 60034) with class 'F' insulation, 1500 RPM synchronous speed, operating on 415 V +/- 10%, 3 phase, 50 Hz AC supply. The motor shall be non- overloading type. Pumps will be with performance characteristics as given below. The pump and motor shall be mounted on a common base plate. All external and exposed cast iron parts of pumps should have an coating made in a cathodic electro-deposition (CED) process. Pump set shall be complete with thermal insulation same as chilled water pipes, aluminium cladding at suction and discharge, necessary anti vibration pads, MS base plate, and all other accessories complete as required.Pump material and operating conditions are given here under: Capacity of each pump (LPM) 2646 Pump Head (Mt) 25 Pump Efficiency Not less than 75% Maximum Permissible Speed 1450 RPM HP of Motor 20

COOLING TOWERS Supply,installation, testing &commissioning of FRP induced draft cooling tower of capacity 175 TR (529200 Kcal/Hr) complete with sump & steel ladder, EFF 2 type fan motors suitable for 415 V, 3 phase, 50 Hz. MS Structure for mounting Cooling Tower, access arrangement for cooling tower interior, cement concrete foundation, stel / masonry support structure, anti vibration mountings etc. The starter, isolating switch & panel near cooling tower to be included in main electrical panel price, i.e. in the Detailed Bill of Quantities). The cooling tower shall conform to technical specifications Section. It should be complete as per directions of Engineer-In-Charge. (2Working +1 Stand By) Sound Level 75dB at 1Mt Inlet Water Temperature 36.39 °C Outlet Water Temperature 32.22 °C HP of C/T Fan Motor 2 x 7.5HP

HOT WATER BOILER SUITABLE FOR OUTSIDE CONDITION

Supply, installation, testing and commissioning of Electric Hot Water Generator of vertical construction equipped with sufficient number of flanges and electric immersion heaters. The pressure vessel shall be constructed as per ASME standards and insulated on all sides with 50 mm thick fiberglass with 0.60mm Aluminum cladding as per specifications. The hot water generator shall be equipped with all automatic and safety controls such as high temperature water thermal cutout, Low water level cut-off, PLC, HMI other controls as per tender specifications. The hot water generator shall be control by PLC based Step controller and HMI screen and BMS compatible having Ethernet/RS485 Port. All basic controls and terminals shall be located in an integral control cabinet factory wired and tested. The hot water generator shall be suitable for 415 volts,50 Hz, 3phase power supply.The entire hot water generator shall be factory assembled and tested. Note:a. Water ‘IN’ temperature : 45 deg C. b. Water ‘OUT’ temperature : 70 deg C 3 Nos 50 Kw(2w+1s)

HOT WATER PUMPS

Constant hot water pumps Supply, installation, testing and commissioning of PN16 rated Vertical Inline Split Coupled (with rigid aluminium alloy coupling between pump shaft and motor shaft) single stage centrifugal pump each capable of delivering the specified flow rate comprising the following and complete as per specifications. Casing (Volute) - Cast Iron. Impeller - Gunmetal Bronze - Statically and Dynamically Balanced Casing Gasket - Confined Non Asbestos Fiber Pump Shaft - SS 416. Flush Line - Braided Stainless Steel Mechanical Seal - Outside Balanced (the pump design shall meet the requirement of servicing / changing the mechanical seal without disturbing the pump shaft alignment) Motor Type - TEFC Squirrel Cage, Efficiency Class - IE2, Insulation - Class F, 415V ± 10% , 50Hz ± 5%, 3Ø AC Power Supply 3cNos. (2W+1S) Vertical Inline Split Coupled PN16 centrifugal pump Right angle Suction guide with inbuilt guide vanes & strainer of Cast Iron body.To be supplied by pump manufacturer for unit responsibility. Flow rate 80 USGPM and 15 METER head (2W+1S)

MICROBUBBLE AIR & DIRT SEPERATOR

Supply, installation,testing & commissioning of Micro bubble Air & Dirt Separator capability,automatic air purging arrangement etc.The shell shall be constructed of mild steel with coalescence. It shall work on the principle of coalescence.The water velocity the shall not Exceed 1.5m/sec.The M.S shall to be fabricated or other similar standard.The inlet and outlet connections shall be flanged. It shall be provided with a high capacity auto air vent at the to and a drain valve at the bottom.Matching flanges, high tensile bolts & nuts and gasket shall be also provided By the manufacturer.It shall be duly insulated 32mm thick class O Nitrile rubber insulation as per specifications complete as per specifications.The design parameters for the air separator of efficiency 96-98 % should be as follows with Safety working pressure:3.5 bar (32mm thick insulation) Line Size:300 mm diameter

Supply, installation, testing & commissioning of Micro bubble Air & Dirt Separator capability,automatic air purging arrangement etc.The shell shall be constructed of mild steel with coalescence. It shall work on the principle of coalescence.The water velocity the shall not Exceed 1.5m/sec.The M.S shall to be fabricated or other similar standard.The inlet and outlet connections shall be flanged. It shall be provided with a high capacity auto air vent at the to and a drain valve at the bottom.Matching flanges, high tensile bolts & nuts and gasket shall be also provided By the manufacturer. It shall be duly insulated 32mm thick class O Nitrile rubber insulation as per specifications complete as per specifications.The design parameters for the air separator of efficiency 96-98 % should be as follows with Safety working pressure 3.5 bar (32mm thick insulation) Line Size:100 mm diameter CUBICAL PANEL BOARD FOR HIGH SIDE EQUIPMENTS 3 Nos 115 TR Water Cooled Screw Chiller (2 Nos Working+1No of stand by) 3 Nos Primary Pumps ( 2W+1S) @ 15 HP 3 Nos secondary pumps ( 2W+1S) @ 30 HP 3 Nos CDW Pumps ( 2W+1S) @ 20 HP 3 Nos 175TR C/T ( 2W+1S) (2x5.5 HP) 3 Nos 50 KW Hot Water Generator (2 Nos Working+1No of stand by) 3 Nos Hot Water Pumps (2W+1S) @ 15 HP

Design, Manufacture, Supplying, Transport to the site, Receiving, Unloading, Shifting to various locations, handling, assembling, installation in correct aligned position, grouting with dash fasteners, GI nuts-bolts, testing and commissioning of Totally Type Tested Panels (Form-4B construction) complying to IEC:61439 -1/2 cubical with Internal arc withstand of 50kA for 0.3 second and minimum impact resistance IK10 as per IEC:62262 with each compartment front unbreakable glazed door cover and back solid door. The degree of protection of minimum IP:42 for indoor and IP:65 for outdoor use. Panels shall be tested for an Impulse Withstand Voltage of 12kV. Suitable for 415V, 3Phase, 4 Wire 50 Hz Ac supply system bolted fabricated in compartmentalized (preferably) design from CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plate, bottom base channel of MS section not less than 100mmx 50mmx50mmx 5mm thick for Main L.T. Panel and capacitor panels and 40mmx25mmx25mmx 5mm thickplates for MDB/MCC and SDBs etc. incl. cleaning & finishing complete, SMC bus bar supports, with short circuit withstand capacity of minimum 50kA for 1 Sec., fabrication shall be done in transportable sections and all front and back doors shall be hinged type and earth with frame, Entire panel shall have a common copper contineous earth bar of size 40mm x 6mm or as specified below at the rear with 2 Nos. earth stud each side, solid inter connections from main bus bar to switch gears upto cable alley with required size. bus bars and insulated control wiring with suitable size of FRLS PVC insulated copper conductor cable, cable alleys, cable gland plates in two half, incl. providing following switch gears :- Panels will be powder coating (60-80micron as per IS:13871 for indoor and 90-100 micron for outdoor), include one size higher terminal block in cable alley and interconnecting wires between bus bars and terminals via MCB. All Bus-Bar alley and relay compartments shall be provide fully automtic control thermotate with strip heater.

FLOOR MOUNTED CHILLED WATER AIR HANDLING UNITS FORWARD CURVED Supply, installation, testing and commissioning of factory fabricated Double Skinned Chilled Water Air- handling unit Floor Mounted type fabricated with forward curve fan of static 50 mm out of extruded aluminium section with 0.63mm pre-plasticized / pre-coated Galvanised steel sheet outside & 0.63 mm plain Galvanised steel sheet inside with blower, Plug fan /blower section anddirectdriven / blower motor TEFC type suitable for operation on 415 volts ± 10%, 50 Hz ± 5% AC supply, 6 Row deep cooling coil and 2 row deep heating points made of Aluminium finned Copper tube with coil section,with following filtration level, polished stainless steel drain pan made out of 22 G sheet duly insulated complete with motor and belt drive package etc. without face and bypass dampers. The AHU panels shall be insulated with 23 mm thick & 36 Kg/m³ density PU foam. The motor & blower assembly shall be mounted on Aluminium extruded section only (a)The face velocity across cooling coil shall be limited to 152 MPM maxm. (b)Pre-filter section with Pre filter(10 Micron & 90 % Efficiency) in All following AHUS (c)Fan Oulet Velocity Not to Exceed 10 m/s (d)6 RD Cooling Coil(CC) (e)2 RD Heating Coil(HC) The complete AHU shall confirm to above & standard specification. The capacity of Air-handlers shall be as follows:

FM AHU 1x13000 CFM /65 MM Static/6RD/31 TR

FM AHU 1x18000 CFM /65 MM Static/6RD/57 TR

FM AHU 1x24000 CFM /65 MM Static/6RD/56 TR

DX TYPE HI WALL UNIT (GREEN GAS) Supply, installation, testing & Commissioning of DX type split AC units with air cooled condenser mounted in outdoor unit complete with scroll/rotary compressor, condeNSOR, wiring & accessories. Indoor units shall be wall mounted type complete with evaporator, fan, filter, drier, expansion devices & microprocessor control panel along with all accessories with refrigerant & oil charge, cordless remote controls. The unit shall be suitable for working, 50 cycle /second, 1 phase AC supply.The unit shall be designed to take care of veritcal head 4mt & horizontal length of 30 mt & necessary oil seprator shall be included ,Necessary supporting arrangement for both indoor & outdoor units ( Powder Coated /Epoxy painted MS stand for ODU units as per approved make shade by Architect) with necessary vibration isolation arrangement as per site condition etc.( without condensate drain pipe ,electrical pipe ,electrical power & control cabling between indoor & outdoor unit which shall be paid seprately ). The Color of the outdoor units to be finalized by the Architect as per building Architectural elevation. The coil in the outdoor units shall be provided with anti corrosive treatment . The contractor shall visit the site & check the pollutant level such as Sulphur content & harmful acid content in the atmosphere near site & accordingly anticorrosive paint treatment of coil to be provided. All Unit shall be Minimum 5 Star Rating Based The Outdoor unit Compressor must be provided with 5 Year Warranty Period. Dust Filter Civil Work such as wall hole making , wall chisling ,refilling of chiseling part with mortar etc as per site condition. Nitrogen pressure testing for leakages & flushing during installation & after commissioning between IDU & ODU with flar nuts Removable Covers for all indoor & Outdoor units shall be supplied & put on the units after installation & commissioning. Incoming power supply shall be provided near each indoor units

1x1.0 TR Dx Type unit (1w+1S)

1x1.5 TR Dx Type unit(1w+1s)

1x2.0 TR Dx Type unit

Supply, installation, testing and commissioning of copper refrigerant piping (Two Length) duly insulated with 9mm thick nitrile rubber of Class "O" between the above indoor & outdoor units as shown on drawing enclosed .with necessary supports etc 1/2 inch & 5/8 for 4TR , 9/8 & 5/8 for 8.5 TR or as per manufacture specifications.

1.0. TR Dx type Hi wall Unit -Copper Pipe

1.5. TR Dx type Hi wall Unit -Copper Pipe

2.0 TR Dx type Hi wall Unit -Copper Pipe

Supply, Installation , testing , commissioning and handing over of the coil mounted HYBRID Ultra Violet Germicidal Irradiations ( UVGI) System for maintaining indoor Air Quality in indoor units. The system should be capable of reducing the airborne as well as surface bacteria, virus, mold, etc. The system should be designed to achive kill rate of not less than 90% per pass. The HYBRID UV system shall be designed to provide UV dosage of 2000 micro W/cm2 and should produce equal amount of positive & negative reactive oxygen species based on bi-polar plasma ionization to actively reduce the airborne & surface borne pathogens and other chemical gasses such as VOCs. The lamp shall have minimum 9000 working hrs life, ballasts shall be electronic type, life rated grater than 15000 starts. The lamp used should be T5 type, quartz glass, bi-pin type with ceramic ends. High quality aluminium reflector should be the part of the system. An run hour meter shall be provided to indicate remaining life of the Lamp in the form timer of digital display. Minimum UV intensity should be 500 microwatts at all the corners of the cooling coil. Minimum 4ft length of the duct should be covered with UV lights.Should follow IEC 61347-2-3, IEC 61000-3-2, IEC 61547, safety standards.Should follow IEC 60929, IEC68-2-6 Fc, IEC 68-2-29 Eb The lamps should be ISO Certified and plasma ionizers should be UL listed.The vendor should conduct bacteria test or bio test in any 2 locations to be done before and after installation. Pl note All AHU,fcu and duct type unit should be with UVGI UPTO 5000 CFM

AIR HANDLING UNITS ( FOR ISO 8, RECIRCULATION AHU) Supply installation , testng & Commissioning of Sheet metal sectionalised cabinet type air handling unit with thermal break profile in Double skin construction fabricated from Al extruded section frame structure. The inner skin 20G & outer skin 20G GI constrution with 43 mm thick PUF insulation panel with 48kg + 2 Density complete with following section Mixing Chamber Prfilter section with Pre filter(10 Micron & 90 % Efficiency) Cooling coil section with coil 6RD, 70mm static Plug fans with Direct driven motor ,both Motor and Blower are mounted on common base frame Microvee filter section with M.V. filter In Aluminium construction (5 Micron & 99.9 % Efficiency) Fresh air Module With bird screen ,volume control damper and Filter(90 % Efficiency) Exhaust air Module With bird screen ,volume control damper and Filter(90 % Efficiency) sandwich type insulated drain pan ,drain pan should be 18 G SS construction Magnahelic Guages with Necessary Tubing across Pre Filter (0.25mm of W.G.) Microvee filter (0-25 mm of W.G.) & HEPA filter (0-100mm Of W.G.). Mixing chamber should be of minimum 500mm Prefilter section should be of Minimum 200 mm for 50mm Thick filter size (for higher filter thickness ,difference in thickness will be added in pre-filter section.) Coil section should be of minimum 500 mm . Blower section length should be as per standared dimension of the blower required to install the blower in housing. After blower and before Microvee filter there should be gap of 300 mm After Microvee filter and before main discharge their should be gap of 300mm There should be access door across every section of AHU. Necessary openings for magnahelic gauges & electrical connections The face velocity across cooling coil shall be limited to 152 MPM maxm. The capacity of Air-handlers shall be as follows: Fan outlet Velocity not to exceed the 8.5m/s FM AHU 1x5029 CFM/7.76 TR

MAKEUP WATER TANK Providing and placing on terrace polyethylene water storage tank of 5000 liters capacity, ISI:12701 marked with cover and suitable locking arrangement and fixing necessary fitting overflow connection , valves and accassories, base support for tank, connections etc.duly insulated with 50mm thick polystrene slab and finish with sand cement plaster complete as required. (and 5000 liters capacity water storage tank on standby) as per engineer in charge. 5000 LTR

PROPELLER FANS Supply, installation, testing & commissioning of wall mounted Propellar fans suitable for single phase, 230 volts, 50Hz AC. supply of following capacities: complete required of following capacities & as per shop drawing mentioned. All Fans should be AMCA certified 300 MM DIA

INLINE FAN WITH SPEED REGULATOR Supply, installation, testing and commissioning of ceiling suspended Inline fans (Rectangular/Round casing) complete with bird screen, rain guard, metal clad MCB & starter ,5m length copper cable, earthing wire all compete as required of following capacities as per specification and shop drawing mentioned. All Fans should be AMCA certified Capacity: 1500 CFM Static Presure : 20 mm Of wg Kw : 0.7 KW

Fan Capacity = 13000 CFM Static Pressure = 20 mm Wg Motor Rating = Not Exceed 3.7 KW Noise level = not exceed 85 db at 3 meter distance

Fan Capacity = 16000 CFM Static Pressure = 20 mm Wg Motor Rating = Not Exceed 5.5 KW Noise level = not exceed 85 db at 3 meter distance

Fan Capacity = 22000 CFM Static Pressure = 20 mm Wg Motor Rating = Not Exceed 5.5 KW Noise level = not exceed 85 db at 3 meter distance

Fan Capacity = 13000 CFM Static Pressure = 20 mm Wg Motor Rating = Not Exceed 3.7 KW Noise level = not exceed 85 db at 3 meter distance

Fan Capacity = 16000 CFM Static Pressure = 20 mm Wg Motor Rating = Not Exceed 5.5 KW Noise level = not exceed 85 db at 3 meter distance

Fan Capacity = 22000 CFM Static Pressure = 20 mm Wg Motor Rating = Not Exceed 5.5 KW Noise level = not exceed 85 db at 3 meter distance

Fan Capacity =9000 CFM Static Pressure = 20 mm Wg Motor Rating = Not Exceed 3.7 KW Noise level = not exceed 85 db at 3 meter distance

CHILLER & CONDENSER SIDE Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with 80 kg/ cum density resin bonded fiber glass or 144 Kg / cum density mineral wool insulation (non combustible) pipe section insulation covered with a layer of 120 gm/sqm polythene sheet (vapour barrier) and finally applying star bond coating and repairing of damage to building etc. as per specifications and as required. Note:The Pipes of sizes 150mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above.

350 mm dia.(75 mm thick insulation)

300 mm dia.(75 mm thick insulation)

250mm dia.(75 mm thick insulation)

200mm dia.(75 mm thick insulation)

150mm dia. (50mm thick insulation)

125mm dia.(50mm thick insulation)

100mm dia. (50mm thick insulation)

80mm dia. (50mm thick insulation)

65mm dia.(50mm thick insulation)

50mm dia.(50mm thick insulation)

40mm dia. (50mm thick insulation)

32 mm dia (50mm thick insulation)

25 mm dia (50mm thick insulation)

HIGH SIDE VALVES INSULATED VALVES Supplying, fixing, testing & commissioning of following valves, strainers, gauges in the chilled/Hot water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications.

Butterfly Valve Wafer Type Butterfly Valves, Ductile (SG) Iron Body & Disc SS-431 Shaft EPDM Integrally Mouded Liner with Hand Lever Operated upto size 150mm, 200mm & above Gear Operated Pressure Rating PN16 ,Supplying, fixing, testing and commissioning of following valves,strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. 250 mm Dia (75 MM Thick Insulation )

200 mm dia

150mm dia.

125mm dia.

100mm dia.

80mm dia.

65mm dia.

50mm dia.

40mm dia.

Balancing Valve with built in measuring facility with CI Body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled/Hot water circulation as specified.

150 mm Dia (75 MM Thick Insulation )

125 mm Dia (50 MM Thick Insulation )

"Y"strainer of ductile CI Body flanged ends with stainless steel strainer for chilled/hot water water circulation including insulation as specified.

125 mm Dia (50 MM Thick Insulation )

65 mm Dia (50 MM Thick Insulation )

Non- return Valve with dual plate of CI Body SS Plates vulcanised NBR seal flanged end & PN16 pressure rating for chilled/Hot water circulation including insulation as specified.

125 mm Dia (50 MM Thick Insulation )

65 mm Dia (50 MM Thick Insulation )

Pot Strainer 350mm dia

Supply, Installation, Testing & Commissioning of Equalizer Valve in dirt legs complete with nipples as per specifications. 150 mm dia

FLOW SWITCH Supplying, fixing, testing and commissioning of SG Iron Body flow switch with necessary control wiring and interlocking at Condenser Water Pump

Supplying, installation, testing and commissioning of on line scale preventer suitable for following Dia and flow rate with necessary fittings and accessories. 350 mm dia

Supply, installation, testing and commissioning of test points in brass / bronze construction with non return ring complete with suitable size socket on insulated lines complete nipples etc. as required for measurement of pressure and temperature.

Supply, installation, testing and commissioning of digital thermometer with adopter for above test point.

Supply, installation, testing and commissioning of digital Pressure gauge with adopter for above test point.

Supply, Installation, Testing & Commissioning of Drain Valves in dirt legs complete with nipples as per specifications for the followings sizes:-

50 mm Dia

40 mm Dia

25 mm Dia

Supply, installation, testing and commissioning of duly insulated with 80mm thick(40mm in two layers ) expanded polystrene P quality with aluminium cladded open type expansion tank made out of 5 mm thick MS sheet of size 1.0mt x1.0mt x 1.0mt inner surface area epoxy paint two coats to avoid rust complete with all accessories valves & fittings for chilled water as per specs .

LOW SIDE VALVES Supply, installation, testing and commissioning of following Butterfly Valve PN 16 rating duly insulated with Al Cladded valves etc of same rating as per pipe dia as detailed above, complete with companion flanges, nuts ,bolts, gaskets etc.as specified.confirming to specification

100 mm dia

80 mm dia

40 mm dia

Supply, installation, testing and commissioning of Balancing Valve following PN 16 rating duly insulated with Al Cladded valves etc of same rating as per pipe dia as detailed above , complete with companion flanges, nuts ,bolts , gaskets etc.as specified.confirming to specification

100 mm dia

80 mm dia

40 mm dia

Supply, installation, testing and commissioning of "Y" type strainer following PN 16 rating duly insulated with Al Cladded valves etc of same rating as per pipe dia as detailed above, complete with companion flanges, nuts ,bolts , gaskets etc.as specified.confirming to specification

100 mm dia

80 mm dia

40 mm dia

Supply, installation, testing & commissioning of motorised 2 way Modulating Valve complete with electrical actuator,heavy duty PN10 cast iron body with nylon coated S.G. iron disk,water sealant lining, stainless steel shaft, control lever with thermostat control wiring,accessories if any like transformer etc.position confirming to standard specification for the following sizes

80 mm dia

65 mm dia

32 mm dia

Supply, Installation, Testing, & Commissioning of Automatic air vent with ball valve in brass construction complete with nipples, union etc. as required at all high points in the pipe lines. The valve shall be such as to have non-return valve as integral part of the vent. 15 mm dia auto air vent valve

Supply, Installation, Testing & Commissioning of 25mm diameter Drain Valves in dirt legs complete with nipples as per specifications.

Supply, installation , testing & commissioning of 13mm nitrile rubber Class O insulated condensate drain water piping of GI 'Medium' class complete with Medium Class fittings like elbows, tees, reducers bends, MS flanges, supports, welding, painting etc. as required for the following sizes:-

50 mm dia pipe

40 mm dia pipe

32 mm dia pipe

25 mm dia pipe

0.63 mm sheet duct

0.80 mm sheet duct

1.0 mm sheet duct

1.25 mm sheet duct

Supply, Fabrication, installation and testing of GSS sheet metal ducts & finally applying fire rated paint as per BS 476 Part 24 (Site FABRICATED DUCTS For Connection /Plenum etc.) in accordance with the approved shop drawings complete with all accessories like vanes, flanges, suspension rods , anchor bolts, GI bolts & nuts, etc., as per specifications.

0.63 mm sheet duct

0.80 mm sheet duct

1.0 mm sheet duct

1.25 mm sheet duct

Supply, fabrication, installation and testing of 50 micron powder coated, aluminum extruded linear fixed horizintal bar/grill/Diffusers with all side flanges as per approved shop drawings.

Supply, installation, testing and commissioning of GI volume control duct dampercomplete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.(18G)

Supply, Installation and Testing of 50 micron powder coated, Al extruded volume control damper for collor to be provided with suitable links and quadrants for control of volume of air.

Supply, fabrication, installation and testing of 50 micron powder coated, aluminum extruded fresh air louvers with bird screen & Al volumne control damper with all side flanges as per approved shop drawings.

Supply, Installing, testing of fire retardant flexible canvass connector 200 mm deep made of imported FIBER GLASS WEAVE fabric with Silicon Rubber Coating & 30 mm Extruded Aluminum Frame.

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications

Fire Dampers Supply, installation, testing & commissioning of Duct/Wall mounted multi blade, motorised fire & smoke dampers with spring return actuator. The damper shall be of atleast 1.5 hr. fire rating and actuated with the help of 24 V electric actuator excluding. The damper shall be as per UL listed UL 555; 1995 and CBRI approved. The damper shall be constructed out of 16G galvanised steel sheet & as per specification with Control Cable to Potential Free Contact for tripping of AHU fan motor.

Damper Actuator Supply, installation, testing and commissioning of Motorised Spring Return Actuator for devices upto 0.8 sq. metre with with control panel & temperature sensor.

INSULATION WORK. Insulation material shall be closed cell flexible elastomeric foam based on synthetic rubber composition with fire retardant properties.The insulation material shall have Microban®* an anti-microbial product, which is EPA (Environmental Protection Agency), USA Approved, as an integral part of insulation that cannot be washed off or worn off. The insulation material shall give enhanced level of protection against harmful Microbes such as fungi, bacteria & mold and should confirm to UL 181, ASTM G 21/C 1338. Thermal conductivity of insulation material shall not exceed 0.036 W/(m.K) at mean temperature of 24°C as per ASTM C 177 / ASTM C 518. Water Vapor Permeability of insulation material shall be minimum 0.05 Perm-in. /0.725 x 10-13 Kg/[s.m.Pa] without any external barrier as per ASTM E 96. Procedure A. The insulation material shall have water absorption of 0.2% by volume as per ASTM C 209 / ASTM C 1763. The insulation material shall have fire performance rating of 25/50 as per ASTM E 84. The insulation material shall have fire performance rating of UL 94. The insulation material shall be self-extinguishing, does not drip, and does not spread flames. The insulation material need to comply with local Civil defence authority norms & should possess a valid approval. The insulation material shall be dust and fibre free. The insulation material shall be formaldehyde free. The insulation material shall be CFC & HCFC free. The insulation material shall meet ASHRAE 90.1-2010, ASHRAE Standard 189.1, NFPA 90A & NFPA 90B Standards. The insulation material shall withstand maximum surface temperature of +105 Deg.C and minimum surface temperature of -50 Deg.C as per ASTM C 534. The insulation material shall have ODP (Ozone Depletion Potential) and GWP (Global Warming Potential) of Zero. The insulation material shall be applied indoors. Coverings shall be used for exposed areas. Thickness of the insulation shall be as specified for the individual application. The insulation material shall be installed as per manufacturer’s recommendation. 13 MM Thick

ACOUSTIC INSULATION - FOR DUCT Supply and Application of Acoustic Insulation Inside the Duct with Engineered Nitrile Rubber open cell foam with Density 140 - 180 Kg/m3 passing Class 1 Fire Performance test as per BS 476 Part 7 and with built-in EPA approved Microban antimicrobial protection; to be applied using manufacturer's recommended Rubber based Adhesive in a blend of solvents, Metal Strips and Anchor Fasteners as per design.

15 mm thickness (Internal Lining of Ducts)

25 mm thickness (Internal Lining of Ducts)

Supplying, fixing acoustic lining on wall and ceiling of AHU rooms & plant room with Nitrile Rubber open cell foam with Density 140 - 180 Kg/m3 passing Class 1 Fire Performance test as per BS 476 Part 7 and with built-in EPA approved Microban antimicrobial protection; to be applied using manufacturer's recommended Rubber based Adhesive in a blend of solvents. , Metal Strips and Anchor Fasteners as per design.

ROOF INSULATION Supply & Installation of Thermal Insulation on Duct exposed to sunlight using Closed Cell Anti Microbial and Anti Fungal Class O Nitrile Rubber Elastomeric Insulation of Density 40 - 60 Kg/m3, Thermal Conductivity of 0.035 W/mk at 200 Celcius Mean Temp. and Mu≥10000 and with Chemically treated Factory Laminated Woven Fibre Glass Cloth with 200+/-20 gsm using manufacturer's recommended Rubber based Adhesive in a blend of solvents complete as per Specifications. 25 mm thick Class O Nitrile Rubber Insulation with GC cloth

ISOLATORS Providing & fixing weather proof isolator with suitable rating near each unit, the prices should be inclusive of copper cabling from isolators to outdoor units.

POWER CABLING INCLUDING CABLE TRAY Supplying of following 1100 volt grade XLPE insulated PVC sheathed aluminium / Copper conductor armoured cables as per specification for the following sizes and type:-

PVC/ XLPE insulated PVC sheathed heavy duty, armoured electrical cables with Aluminium conductor for working voltage upto and including 1100volts ( conforms to IS:1554, Part-1) 3.5 core 240sqmm.

3.5 core 95sqmm.

PVC/ XLPE insulated PVC sheathed heavy duty, armoured electrical cables with Copper conductor for working voltage upto and including 1100volts ( conforms to IS:1554, Part-1)

4 core 16 sq. mm. Stranded ( Copper)

4 core 10 sq. mm. stranded ( Copper)

3 core 16 sq. mm. Stranded ( Copper)

3 core 10 sq. mm. stranded ( Copper)

3 core 2.5 sq. mm. ( Copper Control cable)

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray

Above 35 sq. mm and upto 95 sq. mm

Above 185 sq. mm and upto 400 sq. mm

Supplying and making end termination of following sizes with brass compression gland including providing and crimping solderless plugs/ferrules of sizes PVC insulated PVC sheathed aluminum conductor armoured cable 1.1 KV grade.

3.5 core 240 sqmm.

3.5 core 95sqmm.

4 core 16 sqmm Stranded ( Copper)

4 core 10 sq. mm. stranded ( Copper)

3 core 16 sq. mm. Stranded ( Copper)

3 core 10 sq. mm. stranded ( Copper)

3 core 2.5 sq. mm. ( Copper Control cable)

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required. (Powder coated shall be of Siemens Grey Colour- RAL 7032)

100mm width X 50mm depth X 1.6 mm thickness

150mm width X 50mm depth X 1.6 mm thickness

200mm width X 50mm depth X 1.6 mm thickness

Earthing Strip / Wires. Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Supply & laying 25x5mm GI strip at 0.5mt below ground as strip earth electrde including connection/terminatng with GI nut,bolt,spring,washer etc as required.)jointing shall be done by overlapping &with 2sets of brass nuts bolt&spring washer spaced at 50mm) 25mm x5mm

SCHEDULE `A' Section-XVI, PART - II (MISCELLANEOUS WORKS ) (To be quoted by the tenderer)

Supply, installation, commissioning of water cooler partially stainless steel electric driven single phase having approx storage and normal cooling capacity 60/120 ltrs complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA

Aalaya Engineering Project Private Limited

Ktech Engineer Builders Co. Pvt. Ltd

B D Raizada Projects Pvt Ltd

MAHINDER PAL CONSTRUCTIONS PVT LTD

Pooja Singla Builders And Engineers Pvt Ltd

Global Enterprises

SOOD ASSOCIATES PVT LTD