PROVN CHAIN LINK SECURITY FENCING AT KANCHLU AND CERTAIN OTHER REVENUE WORKS AT DEVSAR AND LARIKPURA UNDER AGE P OF GE 861 EWS

Amount

Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth for foundation etc or for shaft wells, cesspits manholes pier holes etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out soft/loose soil complete all as specified and directed.

M&L PCC 1:4:8 type D2 (40 mm graded aggregate) as in foundations,filling and mass concrete complete all as specified and directed.

M&L RCC M25 Design Mix (20 mm graded aggregated) in foundations, including rafts, footings, foundation beams; plinth beams; base for columns, etc basements slabs under ramed piles and mass concrete complete all as specified and directed.

M&L RCC M25 Design Mix (20 mm graded aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L RCC M-25 design mix using 20 mm graded aggregate as in Beams, cantilevers, bressummers lintels over 1.5 m span complete all as specified and directed.

M&L RCC M-25 design mix using 20 mm graded aggregate as in slab supported on walls, beams and columns in floors, roofs landings balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Form work to sides of concrete foundations, footings,bases of columns, raft beams sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finish surface of concrete square, rectangular or polygonal complete all as specified and directed.

Form work to sides and soffits of floor or roof beam haunching , lintels, cantilevers shelved including supports overhangs etc also splays between floors and beams finish rough, etc complete all as specified and directed.

Form work to sides and soffits of suspended slab such as roof slab, floor slab, shelves and similar works n. exc. 200 mms thick (Horizontal or sloping), finishing rough the concrete surfaces, complete all as specified and directed.

M&L MS TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified and directed.

M&L MS TMT Bars of 5 mm dia and over up to 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L MS TMT Bars of 5 mm dia and over up to 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Walling of random rubble masonry with best quality stone, uncoursed, well bonded, bedded and solidly hearted and built in CM 1:6, all as specified.

M & L for precast cement concrete block masonry , type B-1 (1:3:6) 20mm graded aggregate,with hollow blocks exc 10cm in width set in CM 1:6, complete all as specified as directed by Engr-in- Charge

M&L providing precast cement concrete louvers and Jallies, 35 mm thick 1:2:4 type B0 (12.5 mm) graded aggregate ) as in CM 1:4 (measured solid) including all moulding complete all as specified and directed.

15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished the surface even and smooth without using extra cement, complete all as specified and directed.

15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coat of distemper oil emulsion white or coloured tinted over a coat of primer complete all as specified and directed.

M&L preparation of new plastered surface of walls and applying two coat of cement base paint over a coat of alkali based primer complete all as specified and directed.

M&L for PCC 100 mm thick type D2 , 1 : 4 : 8 using ( 40mm graded aggregate ) as in sub base of floor complete all as specified and directed.

Plain cement concrete M-10, 1:3:6, type C-2, using 40mm graded mechanically crushed stone aggregate, 75mm thick, as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified and directed. Note:- The unit rate include for use of form work (straight or curved).

PCC (1:2:4) type B-0 (Using 12.5 mm graded aggregates), as in flooring 25 mm thick as sub base complete all as specified and directed.

Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

Glazed ceramic coloured tiles 450mm x 300mm x 7mm thick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed.

Hard core of broken stone or boulders of guage n.exc 63mm deposited, spread and levelled in layers n. exc 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

Rolled mild steel in roof trusses (framed),trussed ,purlins,crane girders,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410-W (Gde-E-250) quality-A, complete all as specified and directed.

M&L for preparation of new steel and iron surface exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding (eaves board) to wall fixed with self tapping screws as specified and directed.

S&F Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section of 150mm length complete all as specified and directed.

S&F aluminium handle100 mm size, cast type, anodized complete all as specified and directed.

S&F butt hinges medium weight MS cold rolled 100mm long complete all as specified and directed.

M&L 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling flat and sloping with nails to timber frame complete all as specified and directed.

M&L 2nd class soft wood plain fillets square/rectangular or triangular in section of sectional area exc 13 Sqcm but n exc 25 Sqcm but bullnosed splayed chamfered or rounded on one edge or face complete all as specified and directed.

S&F Vitreous china bowl urinal flat back, size 465 x 355 x 265 mm, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating . (Exclusive of fixing supply pipe to flushing cistern,waste coupling)

S&F Vitreous china, wash hand basin, white, flat back, of size 630mmx450mm with brackets including cutting for and pinning in ends of brackets and including 32mm dia PVC waste pipe, complete all as specified and directed.

S&F pillar taps, with capstan heads chromium plated screwed down high pressure, with or without lettered, hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed 15 mm bore complete all as specified and directed.

S&F 32 mm dia waste coupling of PTMT (Half or full threaded) suitable for wash hand basin & Urinal complete all as specified and directed.

S&F Vitreous china squatting pan water closet, orissa pattern, size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap, jointing to flush pipe complete and making good to floor in cement concrete M-5 (1:5;10), type E-2 using 40mm graded crushed stone aggregate, complete all as specified and directed .

S&F PVC low level flushing cistern white 10 Ltr capacity with internal fitting push button operated type with and including bracket, PVC flush pipe etc complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F PVC waste pipe 32 mm dia suitable for wash hand basin complete all as specified and directed.

S&F Steel water tubing, 15 mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor etc complete all as specified and directed.

S&F Steel water tubing, 20 mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor etc, complete all as specified and directed.

S&F 15 mm bore, bib taps cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15 mm dia stop cock cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union but fancy type chromium plated complete all as specified and directed.

S&F CP brass soap dish complete all as specified and directed.

S&F grating square 150mm size of PTMT (Minimum weight 100 gms) complete all as specified and directed.

M&L Salt glazed stone ware drain pipe , grade 'A' of 150mm dia laid in trenches and jointed including all accessories & fittings set in cement mortar complete as specified

S&F110mm bore dia PVC (SWR) bends, complete all as specified and directed.

S&F PVC (SWR) junction (Single T) equal or unequal 110 mm bore complete all as specified and directed.

S&F PVC (SWR) 'S'/ 'P' trap 110 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl 100 mm bore complete all as specified and directed.

S&F PVC (SWR) 100mm dia floor trap, plain with grating including jointing with solvent complete all as specified and directed.

S&F Rotational moulded polythylene 1000 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position complete all as specified and directed.

S&F 20 mm bore brass valves high pressure, with polythyline float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F 20 mm bore dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Septic tanks, exc, in ordinary soil, foundation In PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm MS plate embedded all around/fiber reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete for 100 users complete all as specified and directed. Drg No CESZ/TD-01/2015 Sheet 1/3, 2/3.

Construction of soakage well for users, excavation in ordinary soil, foundation PCC 1:3:6 wells of honey combed and solid in M-25 concrete, including intercepting chamber chamber screen chamber, brick work CM 1: 4, RCC cover slab in M-25/ RR masonry filling with brick bats, complete of size 1.20m dia 3.0 m deep as shown in drg complete all as specified and directed by Engr-in-Charge. Drg No CESZ/TD-01/2015 Sheet 3/3.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft soil complete all as specified.

M&L for Hardcore of broken stone or boulder of gauge exc 63 mm but n. exc 100 mm, deposited, spread and levelled in layers n. exc 15 cm thick, watered and rolled/ rammed to a true surface complete all as specifid.

.M&L PCC 1:3:6 type C-2, 75 mm thick using 40 mm graded aggregate as sub base complete all as specified..

S&F exterior designer tiles 300mmx300mmx25mm of approved size and pattern with one or more colour combination of approved shade and finish, set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor including 15mm thick screed bed in CM 1:6 complete all as specified.

M&L providing, cement concrete type C-1, 1:3:6(20 mm graded aggregate) in Kerb stone, roof kerbs or mud stops, rounded or chamfered on edges all as specified and directed.

M&L PCC type C2, 1:3:6 using (40 mm graded agg) as in concrete bed to drain pipe includng packing under, and haunching against the sides of pipes after they are laid and tested for 150 mm pipe complete all as specified and directed.

M&L precast concrete type B1, 1: 2: 4 (20 mm graded aggregate) as in manhole covers slab set in CM 1:4 complete all as specified and directed.

M&L PCC type C2 1:3:6 (40 mm graded aggregate) in surface channels and drain complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25cm complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm soft/loose soil complete all as specified and directed.

M&L cement concrete type C2 1:3:6 (40mm graded aggregate) in mass concrete complete all as specified and directed.

S&F mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparation of surfaces treating ends of posts, backs of chowkats, etc area tarred exc 0.1sqm but n.exc 0.5 sqm each treated with tar or coal tar black paint complete all as specified and directed.

S&F 4mm dia galvanised steel wire,(Chain Link) 100x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed.

S&F MS bolts n exc 12 mm dia purpose made with hexagonal or square head one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexogonal or square not exc 30 cm long complete all as specified

S&F for galvanised , 2 strand , steel barbed wire, 2.24 mm dia barbed with 2 mm dia barbs, 75 mm spacing and straining and fixing to any type of standard rails and straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire complete all as directed.Note:(Each line of wire to be measured)

M & L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

All as per srl item No-81 here in above but for one 5A socket outlet on the same board controlled by one switch.

All as per serial item No 81 here-in-before but for 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable as earth lead, complete all as specified and directed.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

M&L for Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal 230 volts.

M&L for Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal 230 volts.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed by Engr-in-Charge

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.complete all as specified & directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Fixing only Exhaust fan 230mm to 250mm sweep PVC body with louvers, 240 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable of suitable size, nut bolt and other fixing material complete all as specified and directed.

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge.

MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

MCB, SPN , AC, 240 volts, B series capacity 32 Amps 10kA and making connections complete all as specified & directed.

Material & labour for repair of earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the GI wire 4 mm dia by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI light grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering , perforated at bottom. 1.75 metre long placed on top edge of earth plate. charcoal and common salt filling with fixing arrangement, funnel wire mesh and earth work in soft soil returning filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI wire of size 4 mm dia with protection pipe of 15mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by -14.5%.(Minus) (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

Supply and laying or fixing or passing through pipe or binding with fencing/pole etc, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 06 Sq mm nominal cross section 2 core solid conductor all as specified and directed by Engr-in-charge.

JANDOO AND CO.

M/S GH MOHAMMAD DAR

NAJAR ENTERPRISES