NIT-18 of 19-20 SPECIAL REPAIR TO BLDG NO T-291 AT NASKA AND CERTAIN OTHER SANCTIONED WORKS AT THALELA AND KISHTWAR UNDER GE (I) 873 EWS

Amount

B/R Portion

Surface dressing not exceeding 15cm deep including clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, and trees not exceeding 15cm girth and height not excceding 1.5 metres and removing rubbish to a distance exceeding 250 metres but not exceeding 500 metres, complete all as specified and directed.

Surface Excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed.

Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.

Removing excavated soils to a distance exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Hard core of broken stone gauge exceeding 63mm and not exceeding 100mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed.

Plain Cement concrete type E-2, 1:5:10 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in CM 1:6, complete all as specified and directed.

RCC M-25, design mix, using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed.

RCC M-25, design mix, using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts, complete all as specified and as directed.

RCC M-25 (design mix) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

RCC M-25 (design mix) in as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified & directed.

RCC M-25 (design mix) in chajjas, complete all as specified and as directed.

Formwork to sides of concrete foundation, footings, bases of columns, rafts and raft beams and similar work; vertical or to batter for rough finished surfaces of concrete, complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, columns (square, circular rectangular on plan or polygonal etc. for rough finished surfaces of concrete, complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete, complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finish flat surfaces of concrete, complete, all as specified and as directed.

Formwork to sides and soffits of chullah hoods, chajjas, troughs and similar items including edges, complete all as specified and as directed.

TMT bars 10mm dia and over, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete, all as specified and as directed.

TMT bars 6 to 8mm dia, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete, all as specified and as directed.

TMT bars 6 to 8mm dia as in stirrups, cut to length bent to shape including binding with MS annealed wire of dia not less than 0.90 mm, complete all as specified and as directed.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

Rendering 15mm thick in cement mortar 1:6 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing, finished even and smooth without using extra cement, complete all as specified.

Rendering 10mm thick in cement mortar 1:4 on brick work or concrete surfaces as on ceiling, finished even and smooth with out using extra cement, complete all as specified and directed.

Supply only liquid water proofing compound all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar, complete all as specified and directed.

75mm thick PCC type C-2, 1:3:6, nominal mix, using 40mm graded crushed stone aggregate as in plinth protection, sub base, path, hard standing etc, surface finished even and smooth without using extra cement, complete all as specified and as directed.

100mm thick PCC 1:4:8, type D-1 (using 20mm graded crushed stone aggregate) as in sub base of flooring / hardstanding, finished even and rough, complete all as specified and as directed.

50mm thick PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in sub base of flooring / hardstanding finished even and rough, complete all as specified and as directed.

100mm thick, plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in floor, path, hardstanding etc. etc., finishing surface even and smooth without using extra cement including use and waste of formwork to divide the area into panels, complete as specified and directed.

50mm thick, plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in floor, path, hardstanding etc. etc., finishing surface even and smooth without using extra cement including use and waste of formwork to divide the area into panels, complete as specified and directed.

Forming contraction joint (dummy joint) 65mm deep x 10mm wide filled with sealing compound grade `A' all as specified and as directed.

Glass dividing strips, 38mm wide, 3 mm thick, complete all as specified and as directed.

25mm thick PCC 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregate) as in floor, finished even and fair to receive floor finishes, complete all as specified and as directed.

Vitrified coloured tiles, dark shade of size 596mm x 596mm x 9 to 10mm thick as in floors etc. bedded & jointed in neat cement slurry over and including 15mm thick screed bed in cement mortar 1:4 and pointed in coloured cement to match the colour of tile all as specified and directed.

16mm to 18mm thick of size not less than 53 x 53cm, machine cut Kota stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing, over and including 15mm thick screed bed or bedding layer of cement mortar 1:4 all as specified and as directed.

Taking down chowkhats with shutters (without taking off shutters from the frames exceeding 1.50 Sqm and not exceeding 4.00 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good the disturbed surface complete all as specified and as directed.

Taking down shutters of any description not exceeding 1.00 Sqm each complete all as specified and as directed.

Pressed steel frame of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed.

PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in back filling of pressed steel door frames and in bed block for holdfast and similar works etc. complete all as specified and directed.

35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete as specified and directed.

35mm thick 2nd class Hard wood factory made rail and style plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

35mm thick, 2nd Class hard wood, factory made, glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and as directed.

Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified and directed.

Aluminium powder coated, three track sliding window outer frame top & sides (section No-21138) of size 62mm x 29.5mm x 1.5mm weighing 0.807 Kg/m, frame bottom (Section No 21139) of size 62mm x 29.5mm x 1.5mm weighing 0.902 Kg/m, shutter plain vertical (Section No 21093) of size 39mm x 20mm x 2.0mm weighing 0.634 Kg/m, shutter bottom horizontal frame (Section No 20551) size 40mm x 20mm x 1.5mm weighing 0.484 Kg/m, with powder coating of minimum thickness 50 micron with one or more rebates, sliding type with out sash bars, 4mm thickness plain glass, rubber packing, snap beading screws, with 5mm thick Tinded glass (AIS) etc. complete all as specified & directed.

Steel rolling shutters, with ball bearing, thickness of lath 1.00mm, including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, push pull or manual type complete with safety lever mild steel lock 4 levers all as specified and as directed.

Butt hinges, medium weight, cold rolled mild steel, 100mm size, complete all as specified and directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250mm, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

Aluminium anodized barrel tower bolt of extruded section and fixed complete of Size 150mm long complete all as specified and directed.

Aluminium handle cast type anodized of size 150mm, complete all as specified and directed.

Floor door stopper 150mm overall length of cover plate of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floorcomplete all as specified and directed.

Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete, complete all as specified & directed.

3mm thick figured glass, pin head type and glazing with oil putty or wooden beads in square not exceeding 0.5 Sqm each complete all as specified and directed.

Galvanised steel wire cloth 0.56 mm nominal dia of wire and aperture 1.18mm and fixed with tinned tacks or galvanized wire staple all as specified and directed at site

Fancy type curtain rod 20 mm dia powder coated fixed to brackets complete all as specified and directed.

Mild Steel Brackets powder coated for holding drapery rods fixed with screws to walls all as specified and directed.

Fancy dome type corner ends fixed to drapery rods 20mm dia all as specified and directed.

Preparation of roof surfcaes by scrubbing down with steel brushes and cleaning with water all loose dirt/dust and roughening concrete roof surfaces and applying cement slurry with 3.0 Kg of cement per Sqm and applying the following Roof Treatment complete all as directed :- (a) Applying 1st course of 15mm thick screed bed with cement mortar 1:4 mixed with liquid water proofing compound over concrete surface. (b) Applying 2nd course of bituminous primer conforming to IS-3384 @ 0.4 Kg/Sqm over the screed bed. (c) Applying 3rd coarse of a coat of blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm.

(d) Applying 4th course of APP (Atactic Polypropylene) modified polymeric membrane 3mm thick weight not less than 3.6 Kilogram/Square Metre with 160 Grams/Square Metre non woven polyester made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat. (e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm. (f) Applying two coats of aluminium paint over APP membrane complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern from roof covering or in ridges, hips, valley gutter and similar works complete, all as specified and directed.

Galvanised, corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roofs, 0.63mm thick, Gde-O quality, with 120grams/sqm zinc coating and Gde 'B' (i.e. 12.5 mm) corrugation complete, all as specified and as directed.

Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.

Mild steel works as in Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified & directed.

Dismantling wall and ceiling board (fibre, pulp, PVC, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and as directed.

4mm thick asbestos fibre cement building boards laid / inserted to GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40mm x 30mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long and scrwed at 450mm centre to centre / intermediate channel 0.9mm thick having two equal

flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fasteners with and including ceiling section (not exceeding 1.20 metre length) of 0.55 mm thickness having kurled web of 50mm and flanged of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457 mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed.

Armstrong mineral suspended ceiling system (FINE FISSURED (TEGULAR) EDGE TILES WITH ARMSTRONG XL 24MM EXPOSED GRID) (regular) edge tiles with armstrong. The grid should be of "Armstrong" make with 24mm wide T-section flanges colour white having rotary stitching on all T section i.e. the main runner with C3 coupling, 1200mm & 600mm cross Tees with Hardened XL2 clip and web height of 32, 27 and 25mm with a load carrying capacity of 7.05 Kgs/m. The T section have a Galvanizing of 120 grams per Sqm & passed through 72 hrs of Salt test complete all as specified.

12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work all as specified and directed.

2nd class hardwood fillets, bullnosed, splayed, chamfered or rounded on one edge or face, square, rectangular or triangular in section exceeding 13.00 Sqcm but not exceeding 25.00 Sqcm, clean sawn, secured with nails or brads complete all as specified and directed.

Excavating in any type of soil for post holes (or similar holes) each not exceeding 0.5 cum and getting out and removing surplus soil to a distance not exceeding 50 metre complete all as specified and as directed.

Mild steel rolled work as in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to grade Fe 410-W (Gde E-250) quality-A, complete all as specified and directed.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity complete all as specified and directed.

Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed to 15mm bore dia of pipe (Minimum weight 210gms), complete all as specified and directed.

Gun metal globe or gate valve with iron wheel heads, screwed both ends for 20mm dia bore iron pipe complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed.

Bib tap cast copper alloy CP, fancy type, with capstan Head handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, complete all as specified and directed.

Stop valve cast copper alloy, with crutch or butterfly handle, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, complete all as specified and directed.

Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, complete all as specified and as directed.

Vitreous china wash hand basin 550 x 400mm, white flat back including cast iron bracket, cutting for and pinning the ends of brackets or erecting on stand including 32mm bore brass chromium plated waste coupling with long screwed shank and fly nuts, PVC flexible waste pipe of bore 32mm and adequate length, 15mm bore PVC connection pipe 450mm long with brass nuts on both side, complete all as specified and as directed.

PVC connection 600mm long fitted with PTMT nut and washer on both ends, fixed to 15mm bore iron pipes, complete all as specified and directed.

Soap dish, vitreous china of size 160mm x 160mm x 90mm, complete all as specified and as directed.

Tubular towel rail, brass chromium plated, 20mm dia, D type, 60cm long between flanges, including pair of brackets, complete all as specified and directed.

PVC (SWR) pipes, 110mm bore, single socketed, in any length of with rubber ring joints, laid in trenches or in floors / fixed to walls, complete all as specified and directed.

PVC (SWR) bends, 110mm bore, complete all as specified and as directed.

PVC (SWR) Floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, complete all as specified and as directed.

Preparation new plastered or previously untreated surfaces of walls and applying three coats of white wash, complete all as specified and directed.

Complete removal of existing treatment on ceilings and applying three coats of white wash, complete all as specified and directed.

Preparation new plastered surfaces of walls and applying two coats of cement base paint including one coat of cement primer complete all as specified and directed.

Complete removal of existing treatment on walls and applying two coats of cement base paint including one coat of cement primer complete all as specified and directed.

Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Preparation of new zinc (or galvanised) surfaces to receive painting by treating with mordant solution including washing treating etc. of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed.

Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed.

Preparation of old steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

E/M Portion

Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including PVC casing and capping and accessories of suitable size for concealed wiring including 1.50 Sqmm copper earth wire (green colour) FRLS Cable for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sheet or cast iron boxes including making good to disturbed surfaces of wall / floor, complete all as specified and as directed.

All as per the description of Serial Item No 94 here-in-before but for one 3 pin socket outlet 5 Amp independent, complete all as specified and as directed.

All as per the description of Serial Item No 94 here-in-before but for one 3 pin socket outlet 5 Amp on same board, complete all as specified and as directed.

All as per the description of Serial Item No 94 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 4.0 Sqm with 2.5 Sqmm copper conductor in green colour for as earth continuity conductor all as specified and directed.

Switch piano, flush type, 5 Amps, single pole, one way, complete all as specified and as directed.

Switch socket outlet combination universal type, 2 in 1, 3 pin 5 and 15 Amp, piano flush type, 240 volts, complete all as specified and as directed.

Switch socket out let combination universal type, 2 in 1, 2 and 3 pin 5 Amp, piano flush type, 240 volts, complete all as specified and as directed.

Socket out let combination universal type, 2 in 1, 2 and 3 pin 5 Amp, piano flush type, 240 volts, complete all as specified and as directed.

Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.

Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings complete all as specified and as directed.

LED Lamp 230 volt 10 watts complete all as specified and as directed.

Tube light fitting box type suitable for and including LED 20 tube Rod 4' long with decorative colour in polycarbonate housing and all accessories pre-wired and making connections with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connector to light fitting complete all as specified and as directed. Make : Havells 'E-Lite LED Curve' Cat Part No LHEXBXPNIN1W020 or equivalent in Philips / Wipro / Crompton / Syska

Bulk head luminaries complete with all accessories suitable for and including 1 x 10 Watts LED lamp including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts 50 Hz complete all as specified and as directed. Make : Havells Cat Part No LHEOAOP7UZ6W010 / Crompton Cat Part No LBHE-10-CDL

Sheet metal enclosure factory made single door for DB 240 volts with 200 Amps rated bus bar SPN 8 Way, complete all as specified and as directed.

Isolator SPN, 40 Amp, 240 volt, complete all as specified and as directed.

MCB SP, 6 to 32 Amp 10 KA, complete all as specified and as directed.

MCCB TP 63 Amps current rating 25 KA, AC 415 Volts, adjustable thermal and magnetic release, complete all as specified and as directed. Make : L&T / Legrand / Schneider / Havells

1100 volts grade, heavy duty cable, PVC insulated stranded aluminium conductor 10 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat, complete all as specified and directed.

XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10 Sqmm 2 core including taking down/up unserviceable cable and making good disturbed surfaces, complete all as specified and directed.

Sand cushioning to under ground cable, laid in trenches 8cm thick below the cable and 15cm thick above the cable after laying and stretching the cable complete punned to 18cm, complete all as specified and directed. Note : Punned thickness of sand will be measured and paid.

Brick well burnt locally available sub-class 'B' laid over sand cushioning for mechanical cable protection in trenches with width of brick perpendicular to the length of cable, complete all as specified and as directed.

Galvanized iron water tubing, light grade, 40mm bore for protection of cable with all fittings fixed to walls and ceilings or laid in floors/road crossing, complete all as specified and directed.

Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 3 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire up to 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion.

VEER TRADERS

VARDHMAN INTERNATIONAL

Bidder Name

VARDHMAN INTERNATIONAL

VEER TRADERS

M/S KOTWAL CONSTRUCTIONS