REPAIR AND REPLACEMENT HPSV MH STREET LIGHT WITH LED STREET LIGHT WITH MAINTENANCE OF OLD STREET LIGHT FITTINGS AND CONNECTED WORKS UNDER AGE EM II IN GE C KIRKEE

Amount

Dismantling & taking down existing street light / security light /flood light / post top lantern / high mast ligtht / tube light / Garden light fitting of any type or wattage from the street / perimeter light on poles / walls including . removing of old, damaged / corroded pipe-bracket, MS clamps, bolts, nuts, etc. for repair by replacement of burnt/worn out accessories and refixing in position after removing dust / foreign particles and cleaning top cover of the fitting completely including connecting of fitting all as directed by Engr-in-Charge. Note :- (i). Accessories/material only wherever required shall be measured and paid seperately as supply only. (ii). Labour charges for taking down and refixing after repair including . minor spares like nuts, bolts and insulation materials shall be deemed to be included in the rate quoted for the item. (iii). The maintenance/repairs of luminaries will be carried out as and when required.

Supply only electronic driver for 35 to 48 watt LED light fitting any type Street/post top/highbay/midbay etc of existing make of Bajaj/HPL/CG/ Wipro/philips/Havells etc.

Supply only electronic driver for70 to 75 watt LED light fitting any type Street/post top/highbay/midbay etc of existing make of Bajaj/HPL/CG/ Wipro/philips/Havells etc.

Supply only electronic driver for 80 to 100 watt LED light fitting any type Street/post top/highbay/midbay etc of existing make of Bajaj/HPL/CG/ Wipro/philips/Havells etc.

Supply only electronic driver for 120 to 150 watt LED light fitting any type Street/post top/highbay/midbay etc of existing make of Bajaj/HPL/CG/ Wipro/philips/Havells etc.

Supply only electronic surge protector cap 5 KV suitable for diferant type and diferant make LED street / flood lights as per old / existing makes like C&S,Havells, HPL, Bajaj, Crompton etc. fixed internaly all as specified and directed.

Supply only electronic surge protactor cap 10 KV suitable for diferant type and diferant make LED street / flood lights as per old / existing makes like C&S,Havells, HPL, Bajaj, Crompton etc. fixed internaly all as specified and directed.

Dismantling / disconnecting & taking down existing Unserviceable Timmer , MCCBs , power contactor , and relays of any type or wattage from the security light control panel including . removing of old, damaged / corroded Sheet metal enclosures , MS clamps, bolts, nuts, etc. for replacement of burnt / worn out above Items all as directed by Engr-in-Charge.

Supply & fix Power contactor 3 pole, with 2 NO + 2 NC aux contacts with standard coil voltage 415/230 volts, Rating 40 Amp as perexisting models in street light paneel of make L & T /Havells / C&S etc including testing connecting commissioning complete all as specified and directed.

Supply, fixing and commissioning MCCB 4 pole having thermal release range-125 Amps and breaking capacity-35 KA at 415 V, 50 Hz, AC as per cat part No 4200 56 Make Legrand or equivalent of makes as specified in list of makes.

Supply, fixing and commissioning MCCB 4 pole having thermal release range-63 Amps and breaking capacity-25 KA at 415 V, 50 Hz, AC as per cat part No 4200 53 Make Legrand or equivalent of makes as specified in list of makes.

Supply, fixing and commissioning Digital type Time switch having sleek MCB shaped design with front display and DIN rail mounting, power reserve for atleast 1500 hrs, operating voltage - 240 V AC, 50 Hz, working temp. upto 55 degree celcius complete with all accessories. Make - L&T Crono, CAT No. - AUTS02DIG00 or equivalent of makes as specified in list of makes.

Disconnecting and taking out burnt Service Wire aluminium conductor cable of any description and in any position from walls / steel structure / laid in floors any size any core complete all as specified & directed by Engineer-in-Charge.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor 10 sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable flat or circular all as directed .

Supply & fixing in replacement of PVC insulated and sheathed unarmoured two core alluninium conductor service cable 2 core 2.5 sqmm 220 volt to be replaced in existing fittings including dismantling and taking out old burt electric cable all as directed .

Excavation in trenches in any type of soil not exceeding 1.5 Metre deep and not exceeding 1.5 metre width and getting out including forming bottom surface & sides to required slope/size as directed by the Engineer-in-Charge

Removal of surplus excavated spoil not exceeding 50 Mtr distance and depositing where directed by the Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified.

Returning filling in, and including spreading and leveling in layers not exceeding 25 cm thick complete all as specified & directed by Engineer-in-Charge.

Material & labour for pulvarised stone dust filling with including gently punning around cables in trenches for cable protection complete all as specified and directed by Engineer-in-Charge.

Supply & laying un-reinforced precast concret cable cover class LV type 1, flat size 250mm x 150mm x 40 mm all as specified & directed.

Disconnecting,dismantling of ACSR conductor any size from over head lines and removing from site comlpete all as specifed and directed.

Removing of LT isulators any type ,any size from poles and removing from site comlpete all as specifed and directed.

Removing of Cross arm, bracket,clamp etc. and removing from site comlpete all as specifed and directed.

Disconnecting and taking out burnt XLPE Aluminium conductor cable of any description and in any position from walls / steel structure / laid in floors any size any core complete all as specified & directed by Engineer-in-Charge.

Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated PVC bedded armored heavy duty electric cable 1100 Volt grade with aluminum conductor of cross sectional area 3.5x50 Sq mm all as specified and directed .

Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated PVC bedded armored heavy duty electric cable 1100 Volt grade with aluminum conductor of cross sectional area 3.5x70 Sq mm all as specified and directed .

Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated PVC bedded armored heavy duty electric cable 1100 Volt grade with aluminum conductor of cross sectional area 3.5x120 Sq mm all as specified and directed .

Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated PVC bedded armored heavy duty electric cable 1100 Volt grade with aluminum conductor of cross sectional area 3.5x240 Sq mm all as specified and directed .

Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated PVC bedded armored heavy duty electric cable 1100 Volt grade with aluminum conductor of cross sectional area 4 x 25 Sq mm all as specified and directed .

Supply and laying in trenches / laid in floor/duct /drawn through conduit XLPE insulated PVC bedded armored heavy duty electric cable 1100 Volt grade with aluminum conductor of cross sectional area 4 x 16 Sq mm all as specified and direcred .

Supply and laying in trenches / laid in floor/duct /drawn through conduit XLPE insulated PVC bedded armored heavy duty electric cable 1100 Volt grade with aluminum conductor of cross sectional area 4 x 10 Sq mm all as specified and direcred .

Supply and laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated PVC bedded armored heavy duty electric cable 1100 Volt grade with aluminum conductor of cross sectional are 10 Sq mm 2 core all as Specified and directed .

Supply & fixing, light grade, 50 mm dia GI tubing with all fittings fixed on walls/ poles/ in trenches as in earth lead or protection pipe for cables all as specified & directed .

Supply & fixing, light grade, 40 mm dia GI tubing with all fittings fixed on walls/ poles/ in trenches as in earth lead or protection pipe for cables all as specified & directed .

Dismantling & taking down existing Unserviceable street / security light /flood light / post top lantern / high mast ligtht / tube light / Garden light fitting of any type or wattage from the street / perimeter light on poles / walls including . unserviceable connection wire etc all as directed by Engr-in-Charge.

Supply & Fixing New LED Light Fitting 45 Watts road lighting luminaire having system lumen of >110lumen/watt, IP 65/66 protaction with high power LED with PDC Aluminium body& secondary optical lenns for beter light ditribution . all as per Make POLYCAB cat part No PCGLS T1 45 N or equivalent in M/S Crompton Greaves//Bajaj/Philips/C&S complete all as specified and directed by Engineer-in-Charge.

Supply & Fixing New LED Light Fitting 72 Watts road lighting luminaire having system lumen of >110lumen/watt, IP 65/66 protaction with high power LED with PDC Aluminium body& secondary optical lenns for beter light ditribution . all as per Make POLYCAB cat part No PCGLS T1 72 N or equivalent in M/S Crompton Greaves//Bajaj/Philips/C&S complete all as specified and directed by Engineer-in-Charge.

Supply and fixing New LED Flood Light Fitting 100 watt energy efficient >100 lumen per watt with poweder quoted Aluminium body & toughened glass visor all as per Make POLYCAB cat part No PCGLF T1 01 100 or equivalent in M/S Crompton Greaves//Bajaj/Philips and including PVC insulated FRLSH multistranded copper conductor cable 1.5 Sqmm - 03 core upto 2 RM complete all as specified and directed by Engineer-in-Charge.

Supply and fixing New LED Flood Light Fitting 120 watt energy efficient >100 lumen per watt with poweder quoted Aluminium body & toughened glass visor all as per Make POLYCAB cat part No PCGLF T1 01 120 or equivalent in M/S Crompton Greaves//Bajaj/Philips/C&S and including PVC insulated FRLSH multistranded copper conductor cable 1.5 Sqmm - 03 core upto 2 RM complete all as specified and directed by Engineer-in-Charge.

Supply and fixing New suspended type industrial LED highbay Light Fitting pressure die cast aluminium housing poweder coated with optical lence 150 watt, >110 lumen per watt lumen output with high power LED all as per Make POLYCAB cat part No PCGLHB T1 150 or equivalent in M/S Crompton Greaves//Bajaj/Philips/C&S and including PVC insulated FRLSH multistranded copper conductor cable 1.5 Sqmm - 03 core upto 2 RM complete all as specified and directed by Engineer-in-Charge.

Supply and fixing street light mounting bracket, made out of Light grade GI Tubing 32 mm bore , bend into shape inner angle not less tan 120° and over all length not less tan 1.0 Mtr including suitable size clamps made from not less than 25x3 mm ms streep , Nut, bolts 12 mm did with washers complete fixing arrangement etc and duly painted two coats of synthetic enamelled Aluminium pait over a coat of red oxide befor fixing all as directed.

M&L for painting of pole steel tubular/rail type with two coats of aluminium paint for of 9/11/12 Mtr long pole externally after removal of old paint, rust, dust, oil, grease or any other foreign deposits by wire brush, cleaning with scrapers for removal of rust for any width or girth incl. numbering of poles in 15 CM dia blackbase & 2.5 to 3 CM height white paint letters all as specified and directed by Engr-in-Charge.

M&L for Erection decorative Street light octagonal pole of internally and externally hot dipped galvanized 3 MM thick steel sheet (grade S355JO) 7Mtr long 'smart poles' of octagonal cross-section with integral camouflaged junction box for incorporating control gears with flush door with necessary locking arrangements, having base plate-250x250x12MM to be grouted on suitable size shallow foundation with M-15 concrete with 450 MM long 04 Nos. 16 MM dia. bolts and mounted with pole top mounting spigot type hot galvanised single arm street light mounting bracket Single arm bracket 500 mm in length all as per instructions and technical specifications of OEM incl pcc work , Eath work etc and to the complete satisfaction of Engr-in-Charge. Make-Singh profile,or of equivalent makes specified in the list of makes.

M&L for Erection decorative Street light octagonal pole of internally and externally hot dipped galvanized 3 MM thick steel sheet (grade S355JO) 7Mtr long 'smart poles' of octagonal cross-section with integral camouflaged junction box for incorporating control gears with flush door with necessary locking arrangements, having base plate-250x250x12MM to be grouted on suitable size shallow foundation with M-15 concrete with 450 MM long 04 Nos. 16 MM dia. bolts and mounted with pole top mounting spigot type hot galvanised single arm street light mounting bracket Single arm bracket 500 mm in length all as per instructions and technical specifications of OEM incl pcc work , Eath work etc and to the complete satisfaction of Engr-in-Charge. Make-Singh profile,or of equivalent makes specified in the list of makes.

Supply and fix in true vertical position steel tubular swaged poles 9.0 M long complete with cast iron base plate, finial taper plug, bolts, nuts and screws, type 410 SP-31, complete all as specified. (Excavation and earth work, foundation concrete and PCC coping shall be measured and paid separately)

M&L for PCC type C2, 1:3:6 using (40 mm gradded stone aggregate) in foundations complete all as specified & directed.

M&L for PCC type B-1, 1:2:4 using (20 mm gradded stone aggregate) for coping, including form work complete all as specified & directed.

M&L for dismantling existing unserviceable looping box alongwith clamps complete, S&F SMC pole mounted right hinged looping box of size 300 mm x200 mmx105 mm with SP MCB 01 Nos, and 4 way connector suitable for upto 35 sqmm cable with HT, GI coating nutbolt and suitable size cable lug as per cable size for both cables complete with necessary MS clamp made of 25x3 mm MS flat, bolts, nuts, washers etc. for fixing to the steel tubular /rail /concrete pole all as specified and directed by Engr-in-Charge. Make: SINTEX Cat No. - Cat No. GS-JB -3020

Cutting and cleaning the tree branches around the LT poles /Over Head line upto 3 mtr from either side of pole / over head line and clear the site and throw away the branches to a distance all as specified and as directed by Engineer-in-charge (Span - Distance between two adjacent poles)

Supplying & fixing MCB single pole (`C’ series ) 5 to 30 Amps capacity suitable for 240 volts having current rating 6-20A of 10 KA including Taking down old MCB SP any type & any capacity complete all as specified and directed.Cat No 408695 Make Legrand or equvailent in Wipro / L&T complete all as specified and directed.

S&F MCB DP 40 amp rating 240 Volt including Taking down old MCB DP any type & any capacity complete all as specified and directed.Cat No 408636 Make Legrand or equvailent / Standard / indo Asian / L&T complete all as specified and directed.

M&L for earthing complete with pure copper solid bar 25 mm outer dia electrode, including testing, 3 mtr long and having suitable hole on top to connect earthing strip with nut bolts, buried directly and vertically in ground with top edge at 30 cm below ground level after making bore hole of 200 mm dia and 3.3 mtr deep using suitable mechanical drilling machine (for drilling near the specified bldg) connected with copper strip 25x3 mm with minimum two Nos of copper/ GM nut bolits and connected to test point from earthing pit. The erthing should be filled with carbon based earthing compound. The resistance of the compound should be less than 0.1 Oms . The compound should be highly conductive, hygroscopic, non magnetic, non corrosive in nature and have best moisture retaining qualities with ph value between 7-9. Connected to the earthing test point, Fiber reinforced plastic pit not less than 300x300 mm with pit cover, including necessary returning filling & removal of extra soil , to achieved earth resistance value less than 3 Oms including testing complete all as specified Make U-Protect or equivalent NOTE : - (i). Earthing strip GI/copper shall be measured and paid under seperate item . (ii). Quoted rate is deemed to be inclusive of cost of demolition of old earthing as directed by Engr-in-Charge. (iii). The new earthing so constructed must have resisitance value below 3 ohms. If the aforesaid resistance value is not achieved contractor has to make proper aadditions/alterations to the newly constructed earthing at his own cost.(IV) The earthigs are to be done in a rockey area.

M&L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. of size 20x3mm

M & L for cross arms , brasings, supports, clamps, and back plate fabricated from structural steel sections including nuts, bolts, washers, weldings, bending cold or hot drilled holes for bolts of any shape or size as indicated or directed including of one primer coat, one under coat and one finishing coat of paint including dismantling of existing.

Restringing of LT OH ACSR conductor consisting of 03 or 06 conductors and up to height of 10 mts above from the ground level .

M&L for drawing, stringing and binding on isulators ACSR conductor on existing poles of any size size as per existing oras required including jointing, testing, connecting complete all as specified and directed by Engineer-in-Charge.

M&L for defect rectification for HT/LT cable laid in trenches by locating fault with the help of electronic fault locating machine comprising of surge generator pulse, ECHO fault locator with high frequency distance calculator etc.including and additional excavation in any soil strata required for exposing the cable fault ; removal of deteriorated portion of cable testing of cable and keeping the same ready for jointing work for cable of size up to 300 Sq mm 3 core HT Cable and 3.5 core 400 sqmm LT cable. The fault locating equipments will be brought to site within the same day of instruction from Engr-in-Charge complete all as specified and as directed.

Supply and fix cable jointing kit for 1100 volts grade cable for straight through joint complete with jointing material (epoxy based) and accessories suitable for 3.5 core XLPE of size 25 to 50 sqmm complete all as specified.

Supply and fix cable jointing kit for 1100 volts grade cable for straight through joint complete with jointing material (epoxy based) and accessories suitable for 3.5 core XLPE of size 70 to 120 sqmm complete all as specified.

Supply and fix cable jointing kit for 1100 volts grade cable for straight through joint complete with jointing material (epoxy based) and accessories suitable for 3.5 core XLPE of size 150 to 240 sqmm complete all as specified.

Supply and fix cable jointing kit for 1100 volts grade cable for straight through joint complete with jointing material (epoxy based) and accessories suitable for 3.5 core XLPE of size 300 to 400 sqmm complete all as specified.

M & L for repairs on OH Lines including disconnecting jumper connections removing accumulated carbon and reconnecting in tight manner to avoid loose jumper connections.

M&L for stay assembly complete with accessories as shown in electric plate No.1 including loop type insulator, stay clamps etc. with 20 mm dia stay rod complete all as specified & directed. Note: - (a) PCC foundation, Exc & earth work & GI stay strand will be measured and paid seperately under relevent items of BOQ. (b) The quoted rate is deemed to be inclusive of minor spares required for connecting and fixing stay assembly.

M&L for Galvanised wire stay strand 7/2.24 mm complete all as specified & directed.

S&F in replacement LT shackel type insulators 1100 volt grade 75 mm height 12 mm dia bolt and GI straps etc. including removing of old one complete all as specified & directed.

M&L in repairs Heat shrinkable outdoor type end termination cable jointing kit suitable for earthed 3.5/4 core 70- 120 sqmm LT 1.1 KV XLPE aluminium conductor cable incld. disconnecting concerned cable, cutting out old kit, inld. testing and commissioning of the complete cable complete all as specified and directed. Make:- Raychem/M-Seal/Denson. NOTE- a. The quoted rate is deemed to be inclusive of cost of saddling or clamping of cable all as directed by Engr-in-Charge.

All as per Item No. 66 above but suitable for earthed 3.5/4 core 150-185 sqmm LT 1.1 KV XLPE aluminium conductor cable

All as per Item No. 66 above but suitable for earthed 3.5/4 core 240-300 sqmm LT 1.1 KV XLPE aluminium conductor cable

All as per Item No. 66 above but suitable for earthed 3.5/4 core 400-500 sqmm LT 1.1 KV XLPE aluminium conductor cable

Leo Enterprises

MAYUR ELECTRIC SERVICES

Om Construction

Rama Electricals

M/S. Niksun Electro-Infra Private Limited

T.H.ASSOCIATES