Renewal of Chilbila DY Service Road from km 0.000 to 2.600, from km 3.411 to 4.385, from km 10.871 to 11.071, from km 11.331 to 11.437, km 12.463 to 13.810, km 18.810 to 20.600 and km 29.300 to 30.000 its Minor

Amount

Earth work in making outer side slope ( shoulder ) of the road with proper ramming and dressing including all labour , material , T&P etc.

Providing, laying, spreading and compacting stone aggregates of 53-22.4 mm sizes to water bound macadam G-3 specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ roller 80-100 KN in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density for Grading 3 for leak undulation level coat & Pots hole filling as per Mord Specification. 405.3

Providing and applying Prime Coat with bitumen emulsion-SS using emulsion pressure distributor @ 0.70 Kg/Sqm. On the prepared granular surface cleaned mannually. As per MORD specification 502 including the cost of all labour, material, royality, all taxes, T&P etc.

Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared surface treated with primer & cleaned with air compressure.

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen VG-10 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 80-100 KN capacity, finished to required level and grades to followed by seal coat as per Technical specification clause - 508.

Providing and laying seal coat type-C sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using 6.7 mm crushed stone grit @ 0.09cum/10sqm from approved quarry and bitumen @0.65kg/sqm including cost of material, labour, plant, machinery, mixall and T&P, all taxes and royality, labour etc. complete as per MORD Specification No.510(ia)

Brick edging on both side of the road of first brick class M-150,, 8 cm wide 12 cm deep laid with mud mortar including labour & supply of bricks finished to required template and in proper aligment and also including dressing & ramming the excavated earth as directed by the engineer in-charge of the work including material, labour and T & Petc for proper completion of the work.

M/s Y.P. Construction