REPAIR MAINT OF ROOF, CEILING, FLOORING, JOINERY, FLOOR, WALL TILING, INTERNAL WATER SUPPLY, PLUMBING TO CERTAIN RESIDENTAL BLDGS IN CDA COMPLEX UNDER GE GUWAHATI

Amount

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coveringscomplete all as directed.

S&F Prepainted galvalume aluminium zink coating GI based corrugated/semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed..

Dismantling floor floor hearth or wall tiling including cement mortar bedding but not backing and removing debrires from the site complete all as specified and as directed.

Taking down shutters and refixing in the same opening exc 1.00 sqm but n.exc 2.00 sqm each of any description complete all as directed.

M&L Non skid coloured tiles 7 to 8 mm thick(square/ rectangular) area of each tiles exc.11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slury over and including cement screed 15 mm thick 1:6 complete all as specified and as directed.

M&L Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed 15 mm thick 1:6 complete all as specified and as directed.

M&L Coloured glazed ceramic tiles 300 x 450 x 7 mm/450 x 350 x 7mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing with CM (1:4) complete all as specified and as directed.

M&L Virified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing with CM (1:4) complete all as specified and as directed.

M&L 18-20mm thick black Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in over and including 20mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including necessary dismantling of existing unserviceable one complete all as specified and as directed.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Demoliation Cement concrete (unreinforced) Concrete Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all asdirected.

M&L for 15mm thick rendering with cement mortar (1:3) on fair faces of brick work /concrete surfaces mixed with water proofing compound as per manufacturer's instructions and finishing the surface even and smooth with using extra cement complete all as specified and as directed. Note:- WPC shall be measured and paid seperately under appropiate item.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L treating sunken floor surfaces with 2 coats of acrylic polymer modified protective and water proofing coating complete all as per manufacturer's instruction as specified and as directed.

M&L PCC (1:5:10) type E-2 (using 40 mm graded stone aggregate) as in sunken portion complete all as specified and as directed.

M&L 25mm thick PCC (1:2:4) type B2 as in sub base of floor/leveling course using 20mm graded stone aggregate finishing cement concrete surface even & fair complete all as specified and as directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 150mm cement concrete (1:5:10) type E-2 using 40mm graded crushed stone aggregate) complete all as specified and as directed.

S&F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe complete all as specified and directed.Make-JAQUAR CAT No-WHC-WHT-184NBTT or as approved by GE from list of approved makes.

S&F in repair, Bib cock with wall flange complete all as specified and as directed Make-JAQUAR CAT No-KUP 35037PM or as approved by GE from list of approved makes.

S&F Rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top) (conforming to IS 12701-1996) multi layer hoisted and fixed in position 500 ltrs capacity complete all as specified in SSR Part I, including writing date of cleaning on tank using stencil in white syntheic paint height not exc 30cm ("DATE OF CLEANING: DATE") and necessary dismantling old unserviceable tank complete all as specified and as directed

Cleaning and degermination of water storage tank 500 litre capacity of any description and in any position comprising following seven stages of operation complete all as under:- (i) Drain out water by opening wash out pipe or any other suitable method approved by Engr-in-charge. (ii) Cleaning the algae formation inside the tank by using TERBAC G5 laboratory tested chemical (Test result to be submitted before the operation of work) (iii) Scrubbing the walls of tank thoroughly with mechanical scrubber and cleaning with fresh water using high speed jet pump. (iv) Degermification by using TERBAC-G5 halogan compound. (v) Cleaning the floor of tank using Industrial Vacum cleaner. (vi) Second Bacteria screening by sterilising method using ultra violet ray within the tank to remove all suspended bacteria. (vii) Final cleaning with fresh water and third Bacteria screening to sterilise the floor of water tank using Laboratory certified Branded strong oxidizing agent TERBAC-G65 and reconnecting the pipe. (vii) Writing Date of cleaning on the outer surfaces of the tank using stencil in white syntheic paint height not exc 30cm ("DATE OF CLEANING: DATE")

S&F in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) complete all as specified and directed.

S&F in repair, 500ltrs capacity water tank cover/lid complete all as specified and as directed.

Cleaning of vegetation, uprotting of grass, cutting and removing of tree roots and making good the distrubed surfaces and removing debries off the permises complete all as directed.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each. complete all as directed.

Taking down shutters exc 1.00 sqm but n.exc 2.00 sqm each of any description complete all as directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, complete as per specification & drawing as specified in SSR Part I, Section 8 and as directed.

S&F Solid PVC Door Frame of size 60mm x 45mm made out of 5mm Prelam colour PVC sheet & edges painted to match with prelam sheet reinforced with M.S. Square tube, & fixing in opening complete as per specification & drawing as specified in SSR Part I, Section 8 and as directed.

S&F Factory made second class hardwood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treatedcomplete all as specified and as directed

S&F Factory made second class hardwood 30mm thick Glazed and skeleton shutters, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) supplied and fitted to chowkats complete all as specified and as directed.

M&L second class hardwood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M&L providing plain cement concrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in copings, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and as directed.

S&F mild steel hold fasts; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sanding complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and as directed.

S&F 100mm size Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F 100mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F 150mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed.

S&F 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 300mm aluminium alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy fixed complete all as specified and as directed.

S&F in repair, Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor ,140mm Overall length of cover plate, complete all as specified and as directed.

S&F in repair, aluminum (extruded body section) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and as directed.

M&L for preparing new wooden surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F stainless curtain rod of wooden finish 20mm dia thickness not less than 0.75mm, fixed with curtain rod holder fixed in walls with screws and finials caps with 6 Nos of curtain ring per RM complete all as specified and directed. Note: Curtain rod holder and finials caps will be measured and paid seperately at Supply only rates)

Supply only decorative stainless curtain holding braket suitable for holiding 20mm curtain rod heavy duty complete all as specified and directed.

Supply only decorative stainless steel finial end cap suitable for curtain rod of 20mm dia as approved complete all as specified and directed. Make-PRAYAG CAT No-BEA-30 or as approved by GE from list of approved makes.

S&F in repair, chromimum plated peg set fixed with PVC rawl plug and cadium screws complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair, 32mm bore Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms) complete all as specified and directed.

S&F in repair, 15mm bore Sink Cock with Regular Swinging Spout (Wall Mounted Model) with Wall Flange complete all as specified and directed. Make-JAQUAR CAT No-QQP-CHR-7347PM or as approved by GE from list of approved makes.

S&F in repairs vitreous china corner wash basin, white, flat back, size 400x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.

S&F in repair, 32mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs,15mm bore PVC Connection with PTMT nut of length 450 mm complete all as specified and directed

S&F in repair 15mm bore pillar taps, chromium plated, fancy type, screwed down high pressure, screwed for iron pipe complete all as specified and as directed Make-JAQUAR CAT No-KUP-35001PM or as approved by GE from list of approved makes.

S&F in repair 600x450mm bevelled edge mirror of selcted quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified complete all as specified and as directed

S&F in repair, Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden /plastic cleats (Minimum weight 90gms) complete all as specified and as directed.

S&F in repair, Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed.

S&F Rimless Bowl for coupled WC with UF soft close slim seat cover , Hinges, Fixing accessories set and accessories set, Cistern fitting, Size:380x660x850mm,S tram-250mm all as specified and as directed Make-JAQUAR CAT No-ONS-WHT-10753S250UFSM or equivalent as approved by GE from list of approved makes.

S&F Two Way Bib Cock with Wall Flange Make - JAQUAR CAT No KUP-35041PM or equivalent as approved by GE from list of approved makes

S&F Hand shower (health faucet)(ABS Body) 1.00 meter long flexible tube & wall hook all as specified and as directed Make-JAQUAR CAT No-ALD-565 or equivalent as approved by GE from list of approved makes.

S&F toilet paper holder with stsinless steel flap complete all as specified and as directed Make-JAQUAR CAT No-ACN-1153S or equivalent as approved by GE from list of approved makes.

S&F 15mm bore Angular Stop cock with Wall Flange complete all as specified and as directed Make - JAQUAR CAT No OPP-15053PM or equivalent as approved by GE from list of approved makes

S&F flush cock with wall flange 25mm with plain knob all as specified and as directed make -JAQUAR CAT NO. CON-1081KN or equivalent as approved by GE from list of approved makes.

S&F Over head shower 105mm round shape single flow with air effect (ABS Body and face plate chrome plated) with rubit cleaning system with 450mm long, 20mm with wall flange shower arm complete all as specified and as directed Make-JAQUAR CAT No-OHS-1709 or equivalent as approved by GE from list of approved makes.

S&F in repair, 110mm UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/Ceilings complete all as specified and as directed.

S&F in repair,110mm dia UPVC (SWR) bends of any radius complete all as specified and as directed.

S&F 110mm dia UPVC(SWR) branch piece, single (single Y) equal or unequalcomplete all as specified and as directed.

S&F in repair, road road safety poly carbonate convex mirror 100cm dia envased in ABS materials, orange in colour for outdoor installation(Polycarbonate with fiber molded back water proof & weather proof) including 3.00 meter long, 75mm dia MS pipe, fixed to ABS FRAME with propper fixing arrangement including necessary excavation and earthwork and PCC of size 45cm x 45cm x50cm, type B1, 1:2:4 (20mm graded aggregate) and removing debries of the permises complete all as specified and as directed.

M/S MANOJ PAUL

M/S SEWAK SINGH

SHANKAR ENTERPRISE

PARAS ENTERPRISE

M/S Bharat Construction

M/S GOSWAMI COSTRUCTION