Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.5 LAccepted-Finance | L1 | Accepted-Finance as per BOQ Chart | |
| 2 | L2₹7.5 L+₹6,685.60 (0.90%)Accepted-Finance | L2 | Accepted-Finance as per BOQ Chart | |
| 3 | L3₹10.1 L+₹2.7 L (36.1%)Accepted-Finance | L3 | Accepted-Finance as per BOQ Chart |
Tender Value
₹11.4 L
EMD Value
₹22,900
Closing Date
16 Nov 2020, 6:00 pmClosed
EXECUTIVE ENGINEER
JKPHC JAMMU
Upgradation ReConstruction of District Jail Poonch Balance work for the construction of Hospital Block Barrack Building inside the Jail Complex at District Jail Poonch (Sanitary Works) CNo. 19B
2020_DGPJK_108910_1
Enit No25 of PHC JAMMU DIV 2020-21 Dt- 10-11-2020
Open Tender
Civil Works
Item Rate
180 days
POONCH
REFER PQ TERMS AND CONDITIONS
3 documents required · 3 mandatory
₹1,000
EXECUTIVE ENGINEER
₹22,900
OFFICE OF THE EXECUTIVE ENGINEER JKPHC JAMMU
23 Nov 2020
10 Nov 2020
17 Nov 2020
10 Nov 2020
16 Nov 2020
10 Nov 2020
10 Nov 2020 - 12 Nov 2020
13 Nov 2020
Amount
Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT,SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete.including all leads ,lifts crriges complete job.
Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including all leads ,lifts crriges complete job.
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed including all leads ,lifts crriges complete job.
Cement concrete pavement with 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregate-20 mm nominal size) including finishing com~lete. (a) Crushed including all leads ,lifts crriges complete job.
Earth work in excavation by manual means over areas (Exceeding 30 em and upto 1.5 mtr in depth, 1.5 mtr in width as well as 10 sqm. on plan) including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in : All kinds of Soil
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed
Providing and laying cement concrete in kerbs, steps and 4.8 the like at or near ground level excluding the cost of centring, shuttering and finishing 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) Crushed including all leads ,lifts crriges complete job.
Centring and shuttermg including strutting, propping etc. and removal of form for Foundations: footings, bases of columns etc. for mass concrete.
Providing and fixing Polyethelene-Aiuminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS:15450 U.V. stablised with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80°C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) eg. Elbows, tees, reducers, couplers and connectors etc. with clamps at one metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the Engineer-in-charge. (Concealed work including cutting chases and making good the wall etc.)
1216 (16mm OD) pipe
1620 (20mm OD) pipe
Providing and fixing Polyethelene-Aiuminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to 15:15450 U.V. stabilised with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80°Cincluding all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e"g. Elbows, tees, reducers, couplers and connectors etc. with clamps at one metre spacing. This includes testing of joints complete as per direction of the Engineer-in-charge: Internal Work exposed on wall.
1620 (20mm OD) pipe
2025 (25mm OD) pipe
3240 (40mm OD) pipe
Providing and fixing Polyethelene-Aiuminium-Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS: 15450-2004 U.V. stablised with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80°C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) eg. Elbows, tees, reducers, couplers and connectors, etc. with trenching, refilling and testing of joints complete as per direction of the Engineer-in-charge. (External work) 3240 (40mm OD) pipe
Providing and fixing ball valve (PE-AL-PE) Brass of approved quality
25 mm nominal bore
40 mm nominal bore
Providing and fixing ( PE-AL-PE) brass union for tank 40M(OD)
Providing and fixing ( PE-AL-PE) Long Tank Nipple 40M(OD)
Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion
110 mm diameter
75 mm diameter
Providing and fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised- Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion
110 mm bend
75 mm bend
75 MM Floor Trap
100 MM Cowel
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with 1 :2:4 mix ( 1 cemE?nt : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design. Inside size 90x80 em and 45 em deep including C.l. cover with frame (light duty) 455x61 Omm. internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With F.P.S. bricks with class designation 75 & with Crushed stone aggregate
Constructing brick masonry road gully chamber 45x45x77.5 em with bricks of class designation 75 in cement mortar 1:5 ( 1 cement: 5 fine sand) with precast R.C.C. vertical grating complete as per standard design With F.P.S bricks
Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot rests
Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors -wherever required
Providing and fixing Salem Stainless Steel A lSI 304 (18/ 8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: 61 Ox460mm bowl depth 200mm
Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
Providing and fixing CP Fitting ( Make Jaguar / Kohler or equivelent)
CP bib Cock Long Nose
Bib Cock Short Body
CP Dugle Ball Valve
Sink Mixer / Basin Mixer
PVC Waste Pipe
PVC Connected Pipe
CP Brass waster Coupling
CP Grating
CP Towel Rod
Looking Mirror Superior Quality
CP Soap Case Heavu Duty
QAZI aftab
M/S ARFAT CONSTRUCTION CEMENT STORE
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .