GE 874/EWS-26/2020-21

Amount

Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out in any type of soil, complete all as specified and directed.

Excavation over area n exc 1.5 m deep and getting out in any type of soil , complete all as specified and directed.

Excavation over area 1.5 m n exc 3.00 m deep and getting out in any type of soil , complete all as specified and directed.

Excavation over area 3.00 m m deep and n exc 4.5 m getting out in any type of soil , complete all as specified and directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation laying of pipes,pole stay assembly and laying of LT cable as in hard/dense soil and getting out, complete all as specified.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.5m in depth for foundation etc not exc 10 sqm on plan and getting out in soft/loose soil all as specified and directed.

M&L for PCC 1:4:8 type D-2 in (using 40 mm graded stone aggregates) in sub basefilling and mass concrete all as specified and directed.

M&L for Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified.

M&L PCC 1:3:6 type C-2 in foundation, filling and mass concrete (using 40 mm graded crushed stone aggregates)

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed.

Removal of excavated material to a distance not exc.50 m and depositing where directed at a level not exceeding 1.5 mtr above starting point, complete all as specified and directed

M & L RCC M-25(design mix) using 20mm graded crushed stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases of columns etc. complete all as specified and directed by Engineer-in-Charge.

RCC M-25(design mix) using 20mm graded crushed stone aggregate as in wall, retaining wall, basement wall, blast walls and the like, any thickness above top of footings including attached pilasters and buttresses, complete all as specified and directed

Walling of random rubble stone masonry uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:4), complete all as specified and directed.

M&L for 100 mm thick PCC type B-0 M-15 (using 12.5mm coarse aggregate) complete all s specified and directed.

M&L for 75mm thick PCC type E-2 M-5 (40mm coarse aggregate) complete all s specified and directed.

RCC M-30 (design mix) using 20mm graded crushed stone aggregate as in beam, cantiliver, bressummers, linteletc complete all s specified and directed.

RCC M-30 (design mix) using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed

Form work to sides of concrete foundations, footings, basis of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to better with rough finished surfaces of concrete complete all as specified & directed.

Form work to sides and soffits of floor or roof beams, girders, bressummers,lintels etc for rough finished surface of concrete complete all as specified & directed.

RCC type B1 1:2:4 (20mm graded aggregate) in slab supported on wall, beams and columns in floors , roofs, landings, balconies, canopies deck slabs and alike., complete all as specified and directed.

Supply and fixing TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified.

TMT bars, 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stirrups, complete all as specified

Form work to faces of walls, retaining walls, abudments, parapits and staircase railings and similar work including attached pillasters,buttresses etc vertical or to better with fair finished surface of concrete complete all as specified & directed

M&L 10mm thick cement plaster cement mortar 1:4 finished on brick or concrete durface with water proofing compound @ 3% weight of cement or as per manufactures instruction, finishing the surface even and smooth with out using extra cementcomplete all as specified & directed ( Noted- water profing compound shall be measured and p[aid separetly under respective items of Sch A).

M&L prepration of new wall surface and applying two coats of cement base paint over acoat of white wash , complete all as specified and directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, confirming to Fe-410-W (Gde E-250) Quality-A complete all as specified

Applying two coats of synthetic enamel paint over a coat of red oxide primer to new or previously untreated steel surfaces over 10cm width or girth including preparation of surfaces, complete all as specified and as directed.

M&L 75mm thick plingth protection in / subbase PCC 1:3:6 Type C-2 (using 40mm graded stone aggregates) complete all as specified and directed.

Supply only Integral water proofing compound

Steel water tubing 20mm bore medium grade galvanized with all fittings like socket,union elbow, tees short pieces, connectors, diminishing pieces, caps plug etc fixed to walls and ceiling or laid in floors, complete all as specified.

S&F for 20mm Gun Metal globe or gate valves with iron wheel head screwed boath end for iron pipe complete all as specified.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified.

M&L 10mm thick cement plaster cement mortar 1:4 other then fair face of brick work or as a screed bed for virtical surface off wall all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on other than fair faces of brick or stone masonry surfaces & finishing the surface even and smooth without using extra cement, complete all as specified.

M&L for 15 mm thick rendring on fair face of brick work/concrete surface in CM 1:6 finishing the surface fair & even compiete all as specified and directed.

M&L two coats of oil emulsion distempring ovder a coat of priming plaster and other surface with alkali resistant priming paint to new plastered surface of wall including prepration of surface.

M&L RCC (Nominal mix) type B0 (using 12.5 mm graded aggregate), as in slab supported on walls, beams,beams and columns in floors, roofs, landing balcony, canpoies, deck slab and in shelves and the like.

Form work to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for fair finished surfaces of concrete, complete all as specified.

M&L Hard core of broken stone/boulders of gauge n exc 63mm deposited spread and leveled in layers n exc 15cm thick, watered and rolled/rammed to a true surface, complete all as specified.

M&L for 15 mm thick screed bed in cement mortarn1:6 for laying floor finishing.

M&L Glazed ceramic tiles in virtical surface (300x200mm) x 7mm thick set and jointed in neat cement slurry and pointed in colour cement to matche.

M&L Non skid coloured ceramic tiles 7-8 mm thick area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles, over and including 15mm thick screed bed in CM (1:4) 25mm thick PCC (1:2;4) type B0 using 12.5mm graded crushed stone aggregate, complete all as specified and directed.

Non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles, over and including 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2;4) type B0 using 12.5mm graded crushed stone aggregate, complete all as specified and directed.

S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified.

M&L 6mm thick Veneered decorative plywood ( 05 Nos of Ply) grade 1 (with BWR resin) with decorative face veneers on one faces fixed with nails to timber frame work as in walls/linings, complete all as specified.

M&L French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, complete all as specified.

M&L 6mm thick plywood ( 5 Nos of Ply) grade BWR type BB fixed with nails to timber frame work, fixed in lining / walls as in ceiling, complete all as specified.

Plain fillets, rectangular or triangular in section clean sawn, secured with nails or brads sectional area exc 3Sqcm & nexc 6Sqcm, second class soft wood clean sawn completed complete all as specified.

Second class softwood as in scantling, clean swan fixed in position with nails, unframed work, complete, all as specified and directed.

M&L 2nd class soft wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fitting in opening all as specified.

Mild steel FI as in hold fasts and similar small articles fixed to chowkats, size 25mm x 3mm conforming to Fe-290 Gde E-165, complete all as specified and directed.

Factory Made Solid PVC Moulded Door Shutter 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, all as specified and directed

M&L plain framed shutter 2nd class soft wood 35mm thick (any number of panel) with panels of timber flat on both sides (feather edged), or of veneered partical board medium dencity,wood partical board with comercial face veneers supplied and fitted in chowkhats 35 mm thick second class soft wood complete all as specified and directed.

30mm thick 2nd class soft wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (divided into square with sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b) supplied and fitted to chowkats complete all as specified.

S&F sheet glass ordinary quality 3mm thick glazing with oil putty or wooden beads in in squars n exc 0.50sqm in each pane, in repairs complete all as specified.

S&F Mild steel butt hinges, medium weight, cold rolled,100mm long, complete all as specified.

Aluminium alloy handles, cast type, anodised ISI marked of size 150mm and fixed, complete all as specified and directed.

Aluminium alloy, anodised, 200mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

M&L for Steel windows or ventilators,fixed type shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

Mild steel butt hinges, medium with cold rolled 75mm size.

Aluminium alloy handles, cast type, anodised ISI marked of size 150mm and fixed, complete all as specified and directed.

Mild steel pressed handle, oval type stove enamelled, black of size 150mm, complete all as specified.

Mild steel barrel tower bolt, stove enamelled black, with bright bolt of 100mm long, complete all as specified.

Mild steel sliding door bolts, stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate and two on staple plate, 200mm long, all as specified.

Two coat of synthetic enamel paint over a coat of pink primer on new wooden or plywood surface of any description, not otherwise described over 10 cm width or girth, incliding preparation of surfaces complete, all as specified.

Two coat of synthetic enamel paint over a coat of pink primer including cleaning & dusting of new or previously untreated wooden or wood based surfaces of any description, over 10cm width or girth, complete, all as specified and directed.

M&L for treating ends of posts, back of chowkats etc with coal tar black paint, area tarred exc 0.10 sqm but n exc 0.50 sqm each including preparation of wooden surface.

Rotational moulded polyethylene water storage tank tripple layer cylindrical vertical with closed top 1000 litre capacity hoisted and fixed in position, connecting to inlet and outlet pipe connections, with and including 20mm dia GI wash out with plug, complete all as specified and directed.

15mm bore Stop valve cast copper alloy screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed, complete all as specified.

Bib taps 15mm bore of cast copper alloy chromium plated, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule, fixed, complete all as specified and directed.

Steel water tubing 15mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceiling or laid in floors, complete all as specified.

Steel water tubing 20mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceiling or laid in floors, complete all as specified.

M&L lagging to pipe 15mm dia used in internal water supply or plumbing all round with, 25 mm thick bonded minral wool performed 'SNAP ON' pipe section of dencity 144 Kg/cum conforming to IS- 9842.

M&L lagging to pipe 25mm dia used in internal water supply or plumbing all round with, 25 mm thick bonded minral wool performed 'SNAP ON' pipe section of dencity 144 Kg/cum conforming to IS- 9842.

20mm bore Gun metal, globe or gate valves (ISI Marked), with iron wheel head, screwed both ends for iron pipe. complete all as specified and directed.

PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement fixed, complete all as specified.

PVC connection 15mm size with PTMT nuts on both ends of length 600mm fixed in repair, complete all as specified.

PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe(vent pipe), fixed, complete all as specified and directed.

PVC (SWR) pipes 75mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe(vent pipe), fixed, complete all as specified and directed.

PVC (SWR) bends any radius 110mm bore provided with aceess door, complete all as specified.

PVC (SWR) gully trap squared or round mouth of 125x110mm, setting & jointing with solvent cement fixed, complete all as specified.

S&F PVC valve syphonic action type flushing cistern low level white with inlet ball valve float and handle including brackets (10Ltrs) capacity fixed with flush pipe of polythylene of low of 32mm for low level cistern complete all as specified and directed.

S & F Vitreous china bowl urinal flat back size of 465X355X265mm white (minimum), with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around the urinal back in cement, complete all as specified.

S&F Soap dish, any type fixed to plug with chromium plated brass screw, complete all as specified.

Vitreous china Wash hand basin, white, flat back of size 550x400mm including brackets, brass chromium plated waste coupling, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand and embeded in cement etc, complete all as specified.

S&F Towel rail 450mm long PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190gm), complete all as specified and directed.

M & L Chequered cement concrete tiles 200x200x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and with pigment to match shade of tiles, over and including 15mm thick screed bed in CM (1:6), over and including 25mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

Concrete bed to drain pipes including packing under and haunching against the sides of pipes for 150mm SGSW pipe after they are laid and tested in PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed.

Plain cement Concrete 1:2:4 type-B1 (using 20mm graded crushed stone aggregate) as in copings, hold fasts plinth band, bed blocks and like slightly rounded or chamfered angles as directed including necessary form work and finishing the exposed surfaceof concrete all as per in relevent clause of SSR Part-I, complete all as specified and directed.

Construction of soakage well, excavation, in any type of soil, foundation in PCC 1:3:6 type C1, as in footing, wall of honey combed/ solid mansonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonary in CM 1:4, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.8 m dia x 3m effective depth, all as specified and shown in Drg No. CESZ/TD- 01/2015 sh 3/3 dated 22/2/15 & revised on 06/06/15.

Construction of 25 users septic tank (brick construction) including inlet and out let chamber with top of slab at ground level including necessary earth work and disposal of surplus soil to a distance not exceeding 50m supplying and placing vent pipe, in position to manhole cover brick construction and all other relevant works, complete, all as specified and shown on drawing No CESZ/TD-1/2015 Sheet 1/3 and 2/3 dt 22/02/2015, revised dt 21/03/2015.

M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) using water proofing compound @ 3% by wt of cement for finished even and smooth (without using extra cement ) (WPC will be measured and paid separtely under respective items of sch A complete all as specified.

150 mm bore salt glazed stone ware drain pipes, grade ‘A’ laid in trenches and jointed as specified and all as directed by Engr-in-Charge.

Mild steel, plain, black sheet 1.00mm thick in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified.

Points wiring for one light point/fan point/socket controlled by one switch with 1.5 sqmm PVC FRLS insulted un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulted un-sheathed copper conductor single core multi stranded flexible cable as earth lead (using colour coding) in and including cable 1100 volts grade including casing and capping (ISI marked) for one light/fan/socket/bell point including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover including cutting chases to wall making good the distrubed surfaces to match with the existing specification complete all as specified.

All as per description all as per item No.53 above here in before, but for 3 Pin socket outlet 5 Amps point on Same board, with cable 2.5Sqmm size, insulated copper conductor cable 1100 volt grade with continuous PVC insulated copper conductor cable of 1.5 Sqmm, complete all as specified and directed.

Points wiring for 3 pin 5A socket outlet independent point controlled by one switch with 1.5 sqmm PVC FR insulated un-sheathed coper conductor single core multi strand flexble cable and 1.5 sqmm PVC FR insulated un-sheathed coper conductor single core multi strand flexble cable (green color) as earth lead, 1100 volts grade including casing and capping (ISI marked) for one light/Fan point including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified. Make of Cable : L&T, finolex, Grandlay.

Point wiring for 3 pin socket outlet 15 Amps on the independent board controlled by one switch with 4 sqmm PVC cable 1100 volts including casing and capping (ISI marked) including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover including PVC insulated 2.5 sqmm copper conductor complete all as specified and directed by Engr-in-Charge. Make of Cable : L&T, finolex, Grandlay, Havells.

M&L for LED Batten 1x20 W for regal batten for LED Universal battenm for G13 with 18 W rods and ultra bright LED Polycarbonate tube light very high effiency suited for instalation in existing T8 and connecting electrically using PVC insulated and overall sheated flexible copper conducter cable of size 0.75 sqm 3 core all as required at site or directed by engr - in- charge. Make : Havells Batten Cap part No LHFYBYG21N1W020 and LED Tube Rod Cat part LHLDCLXNUL8X018 or Equivalent.

S&F Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed , Make : Havells / Anchor.

S & F Switch Socket combination 5 in 1, 6 Pin and 15 Amp flush type universal controlled by one switch (ISI Marked) complete all as specifed and directed. Make : Havells / Anchor.

Socket outlet 2 in 1, 3 pin, 5A, flush type universal, all as specified and as directed.

S&F for Ceiling rose, surface backelite 65x50mm two or three terminals complete all as specified.

Supply and fixing lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings including 9 watt LED bulb complete all as specified and directed.

S&F for surfce mounted decorative bulk head edge - lit LED Luminaire comprising of high brigghtness LED of 1x10 W lED having PF not less then 0.9 all as specified and directed. Make : Havells Cat part No LHEOAOP7UZ6W010 & equivalent.

S&f for RCBO, singal pole and neutral (SPN) 30mA 240V, 32 Amp all as specified and directed. Make havelles/MDS/Legeands.

S&f for MCB 'c' series, singal pole 240V, 32 Amp all as specified and directed. Make havelles/MDS/Legeands.

Sheet metal enclosures factory made, (Single door) for DBs, single pole and neutral, 240 volts, 4 ways with 200Amp rated busbar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging, testing and commissioning, complete all as specified and directed.

Supply laying jointing and testing LT XLPE and PVC insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sqmm 4 core complete all as specified.

M&L for sand cushoining below and around cable in tranches with river sand all as specified.

Supply and laying sub class 'B' brick in trenches for protecrtion of UG cable complete.

Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron strip 32 x 6mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, protected by GI light grade pipe 15mm bore including light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including necessary earth work in any type of soil, PCC 1:2:4 type B-0 as in earthing pit and cover 55mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm), common salt, charcoal and testing on completion, complete all as specified and directed.

Supply and fixing of electronic voltage stabilizer of 6.6 KVA, 30 Am, working range 110-290 Volts, Modle Each no VGMW 1000 Plus all as specified and directed by Engineer- In - charge.

Supply and fixing of Electric water heater storage type of capacity 25 ltrs all as specified and directed by Engr in Charge , Make - Havells , Monza DX HSN Code 8516 or equivelent ISI Marked company.

Cutting the 25 mm dia Gi pipe and fixing the required length/insewrtion of tee for new GI Pipe connection all as directed.

25mm dia GI steel water tubing ,medium grade ISI marked ,laid in trenches with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete all as specified.

Lagging to pipes used in internal water supply or plumbing all round with, 40 mm thick bounded mineral wool preformed 'SNAP ON' pipe section of density 144 Kg/cum conforming is IS 9842, on pipe of internal dia 15 mm with chicken mesh wire netting 25 mm gauge, 20mm mesh complete all as specified and directed by Engr-in-Charge.

Construction of valve pit brick masnory , internal sioze 900x900x900mm ( from top to bottom of cover) including excavatiion in any type of soil, returning and filling in around foundation removal of surplus soil to a distance n exc 50m, PCC 1:4:8 type D-2 in foundation , brick work in cement work in cement mortar 1:6 12mm thick plaster uin cement mortar in 1:4 to internal surface and pointed externally aas the work proceed in the same mortar PCC coping 1:2:4 type B-0 using 12.5 mm graded stone aggregate handel, fixing arranged and painting with synthrtic enamal paint two coat of red oxid primer, complete all as apecified and directed.

M/S WANI CONSTRUCTION AND CO

patriotic builders