REPAIRS, RECANNING AND PAINTING OF WOODEN AND STEEL FURNITURE AT JASAI MIL STN UNDER GE (A) BARMER

Amount

WOODEN FURNITURE BED PLYWOOD TOP (Drg. No. FD-246): M&L for replacement of following unserviceable / defective parts with new one, including two coat of french polishing on new wooden surface and one coat on old wooden surface (including preparation of surface) complete all as shown on drawing and as directed: - (a) Head board complete.

(b) Foot board complete.

(c) Leg made to shape with Ist class hard wood ( teak)

(d) Head / Foot board batten with Ist class hard wood ( teak)

(e) Second class hard wood Long rail

(f) Second class hard wood short rail .

(g) Ply wood top with 12mm thick , BWR grade , both side commercial. (Polishing on ply top is not required)

(h) Tightening existing joints using new bamboo pins duly applying fevicol of existing size as shown in drawings.(Two pins in each joints)

SOFA SET FIVE SEATER WITH ARMS (Drg. No. FD-373): M&L for replacement of unserviceable / defective parts with new one of 1st class hard wood (teak) complete all as shown on drawing and as directed: - (a) Wooden arm section 70mm x 35mm.

(b) Wooden front legs section 70mm x 35mm.

(c) Wooden rear legs section 70mm x 35mm.

(d) Sofa cushion with cover

TABLE DINING 6/8 PERSONS (Drg. No. FD-273): M&L for replacement of following unserviceable/defective parts with new one complete all as shown on drawing and as directed :- (a) Leg made to shape with 1st class hard wood (teak)

(b) long rails made of 1st class hard wood (teak).

(c) Short rails made of 1st class hard wood (teak).

(d) Table top(8 persons) 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white lamination including teak wood edging.

(e) Table top(6 persons) 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white lamination including teak wood edging.

TABLE OF SIZE 900X600X 760 WITH DRAWER (Drg No. FD-283 ): M&L for replacement of following unserviceable/defective parts with new one complete all as shown on drawing and as directed :- (a) Table top, 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white lamination including teak wood edging.

(b) Leg made to shape with 1st class hard wood (teak)

(c) Front / rear rails made of 1st class hard wood (teak).

(d) Drawer made of 1st class hard wood (teak) with bottom 6mm thick ply.

(e) Knob 40mm size with screw.

TABLE OF SIZE 900X600X 760 WITHOUT DRAWER (Drg. No. FD-284): M&L for replacement of following unserviceable / defective parts with new one complete all as shown on drawing and as directed:- (a) Table top, 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white lamination including teak wood edging.

(b) Leg made to shape with 1st class hard wood (teak).

(c) Front / rear rails made of 1st class hard wood (teak).

TABLE OF SIZE 900X900X 760 (Drg. No. FD- 291): M&L for replacement of following: -unserviceable / defective parts with new one complete all as shown on drawing and as directed : - (a) Table top, 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.

(b) Leg made of 1st class hard wood (teak).

(c) Front/rear/side rails made of 1st class hard wood (teak).

PEG TABLE (Drg. No. FD-277) M&L for replacement of following unserviceable/defective parts with new one complete all as shown on drawing and as directed :- (a) Table top, 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white lamination including teak wood edging.

(b) Leg made of 1st class hard wood (teak).

(c) Top rail made of 1st class hard wood (teak).

(d) Tightening existing joints using new bamboo pins duly applying fevicol of existing size as shown on drawings..(Two pins in each joints)

TEAPOY (Drg. No. FD- /278): M&L for replacement of following unserviceable /defective parts with new one complete all as shown on drawing and as specified:- (a) Teapoy top, 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.

(b) Leg made of 1st class hard wood (teak).

(c) Top rail made of 1st class hard wood (teak).

TABLE WRITING WITH DRAWER (Drg. No. FD- 275) M&L for replacement of following unserviceable/defective parts with new one complete all as shown on drawing and as directed : - (a) Top, 19mm thick pre-laminated particle board, exterior grade, one side decorative teak finish and other side balancing white lamination including teak wood edging.

(b) Legs made of 1st class hard wood (teak).

(c) Front/rear rail made of 1st class hard wood (teak).

(d) Side rail made of 1st class hard wood (teak).

(e) Drawer made of 12mm thick particle board with one side teak finish in front side and 06mm thick ply wood for bottom including teak wood edging.

(f) Cup board made of 19mm thick particle board with one side teak finish, 12mm thick particle board commercial finish both side for shelves and 6mm thick ply wood for back.

(g) Knob 40mm size with screws.

TABLE CENTER (Drg. No. FD-274) M&L for replacement of following unserviceable/defective parts with new one complete all as shown on drawing and as directed :- (a) Top, 19mm thick pre-laminated particle board, exterior grade, one side decorative teak finish and other side balancing white lamination including teak wood edging.

(b) Leg made of 1st class hard wood (teak).

(c) Top / side rails made of 1st class hard wood (teak).

CHAIR DINNING (Drg. No. FD-279) M&L for replacement of following unserviceable / defective parts with new one by using bamboo nails and Fevicol including tightened any loose part of chair and/or broken during repair shall also be making good as per existing: - (a) Front leg made of 1st class hard wood (teak).

(b) Rear leg made of 1st class hard wood (teak).

(c) Back rest made of 1st class hard wood (teak).

(d) Stiffener made of 1st class hard wood (teak).

(e) Front/rear/side rail including making holes for canning, made of 1st class hard wood (teak).

(f) Tightening existing joints using new banboo pins duly applying fevicol of existing size as shown on drawings..(Two pins in each joints)

(g) M&L re-canning to chair with 2mm wide plastic cane of superior quality of colour white/overy as in Godrej pattern including removal of unserviceable/damage cane complete all as specified and as directed.

CHAIR WRITING (Drg. No. FD-280) M&L for replacement of following unserviceable/defective parts with new one by using bamboo nails and Fevicol including tightened any loose part of chair and/or broken during repair shall also be making good as per existing: - (a) Front leg made of 1st class hard wood (teak).

(b) Rear leg made of 1st class hard wood (teak).

(c) Hand rest made of 1st class hard wood (teak).

(d) Front/rear/side rail including making holes for canning made of 1st class hard wood (teak).

(e) Tightening existing joints using new banboo pins duly applying fevicol of existing size as shown on drawings..(Two pins in each joints)

(f) M&L re-canning to chair with 2mm wide plastic cane of superior quality of colour white/overy as in Godrej pattern including removal of unserviceable/damage cane complete all as specified and as directed.

CHAIR EASY (Drg. No. FD-229) M&L for replacement of following unserviceable/defective parts with new one by using bamboo nails and Fevicol including tightened any loose part of chair and/or broken during repair shall also be making good as per existing: - (a) Front/rear leg made of 1st class hard wood (teak).

(b) Hand rest made of 1st class hard wood (teak).

(c) Front/rear/side rail of seat including making holes for canning, made of 1st class hard wood (teak).

(d) Tightening existing joints using new bamboo pins duly applying fevicol of existing size as shown on drawings..(Two pins in each joints)

(e) M&L re-canning to chair with 2mm wide plastic cane of superior quality of colour white/overy as in Godrej pattern including removal of unserviceable/damage cane complete all as specified and as directed.

HAT STAND WITH MIRROR LARGE / SMALL (Drg. No. FD-361) M&L for replacement of following unserviceable / defective parts with new one complete all as shown on drawing and as directed : - (a) Replacement to unserviceable 5.5mm thick mirror of size 300mmx660mm.

(b) Replacement to unserviceable CP hanging hooks 120 mm long.

TABLE DRESSING LADIES WITH MIRROR (Drg. No. FD-251) M&L for replacement of following unserviceable / defective parts with new one complete all as shown on drawing and as directed : - (a) Teak wood mirror frame.

(b) Looking mirror 6mm thick copper electro plated of size 365 x 1226mm.

(c) 12mm thick teak wood for sides and face of drawer including 6mm thick ply wood in bottom and chromium plated knob complete.

M&L French polishing to following wooden furniture with one or more coats as required to give glazy appearance complete all as specified and as directed: - (a) Bed plywood.

(b) Chair dining long back.

(c) Table dining 6/8 persons.

(d) Table 900X600X760mm with drawer.

(e) Table 900X600X760mm without drawer.

(f) Peg table.

(g) Teapoy.

(h) Table writing.

(j) Table center.

(k) Chair dining.

(l) Chair writing.

(m) Chair easy.

(n) Sofa set five seater.

(o) Table dressing ladies with mirror.

(p) Table dressing gents with mirror.

(q) Locker bed side wooden

(r) Sofa single seater.

(s) Hat stand with morror large / small

(t) Side board

(u) Table centre two tier

M&L for scratching of old polished layer & fresh Melamine polishing to following wooden furniture with two coats or as required to five shiny appearance complete all as specified and as directed: - (a) Table Writing.

(b) Bed wooden of size 6'x6'

(c) Dressing table ladiers

(d) Almirah large size

(e) Table bed side

(f) Table dining 06 person

(g) Chair dining

(h) Sofa three seater

(j) Sofa single seater

(k) Table centre

(l) Teapoy

(m) Peg Table

STEEL FURNITURE ALMIRAH MEDIUM STEEL WITH SHELVES (FD-1032): M&L for replacement of following unserviceable/defective parts with new one complete all as shown on drawing and as directed : - (a) MS lock with key.

(b) MS Chromium plated handle with MS rod of suitable size.

(c) MS cleat for shelf

ALMIRAH LARGE STEEL WITH SHELVES (FD-1031): M&L for replacement of following unserviceable/defective parts with new one complete all as shown on drawing and as directed : - (a) MS lock with key.

(b) MS Chromium plated handle with MS rod of suitable size.

(c) MS cleat for shelves.

TABLE OFFICE OFFICERS STEEL (FD-1003): M&L for replacement of following unserviceable/defective parts with new one complete all as shown on drawing and as directed :- (a) Table top, 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.

(b) Lock with Key for drawer.

TABLE OFFICE CLERK STEEL( FD-84M): M&L for replacement of following unserviceable/defective parts with new one complete all as shown on drawing and as directed :- (a) MS Lock with Key for drawer.

(b) Table top, 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white including teak wood edging.

(c) Steel drawer made to shape with 1.60 mm thickness of MS sheet

TEAPOY VERANDAH (FD-383) M&L for replacement of following unserviceable / defective parts with new one complete all as shown on drawing and as directed : - (a) Teapoy top, 19mm thick pre-laminated particle board exterior grade, one side decorative teak finish and other side balancing white lamination including 4mm thick teak wood edging complete.

(b) Welding to teapoy frame

CHAIR CB STEEL WITH ARMS (FD-75M) M&L for replacement of following unserviceable/ defective parts with new one complete all as shown on drawing and as directed : - (a) Bottom seat frame wooden duly cane woven and black painted, fixed with screws (Godrej pattern)

(b) Back frame wooden duly cane woven and black painted, fixed with screws (Godrej pattern)

(c) Arm rest wooden duly black painted (Godrej pattern)

CHAIR REVOLVING (TP) Repairs to revolving chair of any type for carry out necessary repair work as under : - (a) Repairing / greasing of hydraulic mechanisam of chair revolving any type

(b) Replacement of un serviceable wheels of chair revolving of any type with new wheels

(c) Replacement of un serviceable base of chair revolving of any type with arms, low back and replacement of un serviceable seat with new ready made seat complete all made to shape & size along with cushion.

(d) Replacement of un serviceable tapestry cloth with new tapestry cloth of approved quality for chair revolving of any type

CHAIR CB STEEL WITHOUT ARMS (FD-75M) M&L for replacement of following unserviceable/ defective parts with new one complete all as shown on drawing and as directed : - (a) Bottom seat frame wooden duly cane woven and black painted, fixed with screws (Godrej pattern)

(b) Back frame wooden duly cane woven and black painted, fixed with screws (Godrej pattern)

TABLE DINNING OR’s (FD-165N) M&L for replacement of following unserviceable/defective parts with new one complete all as shown on drawing and as directed : - (a) 25mm square heavy duty MS pipe as in frame/stiffeners /legs , fixed through welding.

(b) Top made of 19mm thick pre-laminated particle board, exterior grade, one side decorative teak finish and other side balancing white lamination including alround teak wood edging.

CHAIR VERANDAH (FD-259) M&L for replacement of following unserviceable/ defective parts with new one complete all as shown on drawing and as directed : - (a) 20mm dia heavy duty MS pipe as in legs/frame /stiffener, fixed through welding.

(b) Re-canning the both seat and back with new best quality cane 4mm wide white / cream coloured closely woven with Godrej Pattern and as shown in drawing

TABLE OF SIZE 900 X 900 X 760mm STEEL (FD-1009) M&L for replacement of following unserviceable / defective parts with new one complete all as shown on drawing and as directed : - (a) Table top, 19mm thick pre-laminated particle board, exterior grade, one side decorative teak finish and other side balancing white lamination including 4mm thick teak wood edging alround.

(b) Leg made out of mild steel 20mm square tube, cut to size and fixed through welding.

TABLE OF SIZE 900 X 600 X 760mm STEEL (FD-1007) M&L for replacement of following unserviceable / defective parts with new one complete all as shown on drawing and as directed : - (a) Table top, 19mm thick pre-laminated particle board, exterior grade, one side decorative teak finish and other side balancing white lamination including 4mm thick teak wood edging alround.

(b) Leg made out of mild steel 20mm square tube, cut to size and fixed through welding.

CHARPOY GI PIPE FOLDING WITH NYLON NEWAR (FD-388) Removing the old unserviceable Nylon newar from GI Charpoy, cleaning the surfaces thoroughly, supplying and closely weaving both sides with new Nylon newar first qualiuty of light shade of size 50/55 mm wide of approved quality not less than 1.50 Kgs per charpoy including minor repairs complete all as shown on drawings and as directed.

M&L for Spray painting to following steel furniture with one coat of synthetic enamel paint including preparation of surfaces, of olive green (OG) tint or as mentioned against item complete all as specified and as directed: - (a) Almirah large steel with shelves.

(b) Table office officer steel

(c) Almirah small / med steel with shelves

(d) Table office clerk steel.

(e) Chair CBA steel with arms.

(f) Chair CBA steel without arms.

(g) Teapoy verandah (Painting with white paint).

(h) Chair verandah steel (Painting with white paint).

(j) Table steel 900 x 900 x 760mm.

(k) Table steel 900 x 600 x 760mm.

(l) Locker bed side steel.

(m) Book case steel

(n) Charpy MS tube frame ( painting with black paint )

(o) Bed hard with steel frame ( painting with black paint )

(p) Table for duplicator steel

(q) Table pantry

(r) Steel rack of any size

(s) Rackside three space steel

CHARPOY GI PIPE WITH 12 MM PLY TOP (FD-220) M&L for replacement of following unserviceable / defective parts with new one complete all as shown on drawing and as directed : - (a) Long rail of GI pipe medium grade duly threaded

(b) To convert long rail into short rail obtained from item No 33 (a) above and fixed

(c) To convert long /short rail into legs obtained from item No 33 (a) & (b) above and fixed

(d) MCI elbow 32mm (ISI marked)

(e) Replacement of old unserviceable ply wood with 12mm thick ply wood, grade BWR, both side commercial. Polishing on ply top is not required (Make : Kit Ply/National Ply/Century ply)

Note : Execution of repair work of furniture may be carried out at Jasai Mil Stn and at BSO yard of GE (A) Barmer based on user requirement

M/s Ramdev Jangid