Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹3.2 Cr
EMD Value
₹6.4 L
Closing Date
8 Nov 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aircraft Overhaul Division, Nasik
Aircraft Overhaul Division, Nasik
Resurfacing of bitumen Roads at various location in HAL Township area
10032
NK/FW/C-1597/2024-25
Works
Mig Complex - Aircraft Overhaul Divn - Nasik - Works - Contracts
₹0
₹6.4 L
8 Nov 2024
24 Sept 2024
24 Sept 2024
8 Nov 2024
Essential/ Prequalification Criteria
Annual Turnover: Average annual financial turn over during the last 3 years (Financial Year), ending 31st March 2023 of the previous financial year /Accounting year [ should not be less than 30% of Amount put to tender] i.e Rs. In Lakhs
Turn over (Rs. In Lakhs)
Audited copies and Audit report by CA with UDIN of financial documents for last five (5) years Viz.Balance sheet, P &L account, Supporting Schedules and notes to account.
Solvency : Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of tender Submission.( Should not be less than 40% of the estimated cost i.e Rs. In Lakhs)
Related Document to be Uploaded to eProcurement Portal.
Not meeting eligible criteria
Experience:
You are Not Eligible
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
GSTIN Registration Number.
ESIC Registration Number
EPF Registration Number
Bid Capacity ( 2AN-B)
Value of the work executed in last five Financial years (Financial year wise)
Related documents to be uploaded in eprocurement portal.
B = value at current price level of existing commitment and ongoing works to be completed in the next ‘N’ years (i.e 06 Months). (Authority:- Ministry of Statistics & Programme Implementation Guidelines Vide DO No 11025/28/2001 Dt. 7-11-01, Standard General Conditions for Domestic Contracts, as per Clause 4.6)
Not meeting eligible criteria
Earnest Money Deposit (EMD)
License for execution of Electrical works and other specialized works from the concerned authorities /organizations/bodies (applicable for Electrical works combined with Civil works)
Documents to be uploaded along with tender
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.,
Address for correspondence
Contact details
PAN No.
I.T Returns for past 03 years (Assesment Year)
Related documents to be uploaded in eprocurement portal.
Bank Balance statement for last three months.
Details of latest overdraft facilities available with the agencies.
Details of plant & machinery for the work.
Proposed work completion schedule in the form of bar- chart.
Details of person holding the power of Attorney.
Related documents to be uploaded in eprocurement portal.
Bank(s) details: [Copy of the cheque leaf to be uploaded]
ECS Bank details as per Annexure in tender documents , signed and sealed by concerned bank to be Uploaded to eProcurement Portal. And hard copy of original ECS and cancelled cheque to be submitted to address mentioned in e-tender notice for refund of EMD or payment etc(New bidder).
Acceptance by party for Scope of work as per BOQ and Tender terms & conditions
DECLARATION
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions ( Page 1 to 146) including price bid do hereby accept all the terms and conditions laid down
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer.
Specification
Preparation of surface by cleaning with machanical broom removing of all loose dirt and providing and applying tack coat of using bitumen of grade VG-30 @ 0.50 Kg/Sqm on bitumen surface before laying of premixed bituminous macdam over the existing asphalted surface using emultion pressure distrubuter as directed by Engineer In-charge.
Providing and laying bituminous macadam 50 to 100 mm average compacted thickness with bituminous of grade VG-30 @ 3.5% (percentage by weight of total mix) prepared in batch type hot mix plant using crushed stone aggregate of specifide grading premixed with bituminous binder, transported to site by tippers laid over a previously prepared surface with paver finiser equiped with electronic sensor to the required grade level and alignment & rolling with smooth wheeled 8 to 10 tonne vibratery and 6 to 8 tonne tendem rollers as per specification to achieve the desired compaction and density, complete as per specification and direction of Engineer In-charge.
Providing and applying tack coat @ 1.00 kg / Sqm on bitumen surface using hot straight run bitumen of grade VG -30 , including heating the bitumen , spraying the bitumen with mechanically operated spray unit fitted on bitumin boiler , cleaning and preapearing the existing road surface all as specified and as directed by Engineer In-charge.
Providing and laying 2 cm premixed carpet surfacing with 1.80 Cum and 0.90 Cum of stone chipping of 13.20 mm size and 11.20 mm size respectively per 100 Sqm and 52 Kg and 56 Kg of paving asphalting hot bitumen grade VG-30 with no solvant per Cum of stone chipping of 13.20 mm and 11.20 mm size respectively, applying a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete as per specification & directed by Engineer In-charge.(Tack coat will be paid in seperate item)
Providing & laying seal coat of premixed fine aggregate (passing through 2.36 mm & retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-30 Bitumen per cum of fine aggregate and 0.60 Cum of fine aggregate per 100 Sqm of road surface including rolling and finishing with 8 to 10 tonne road roller complete all as specified & as directed by Engineer In-charge.
Supplying & stacking at site (for W.B.M of 100 mm compacted thickness) stone aggregate of 90 to 45 mm size all as specified and as directed by Engineer In-charge.
Supplying & stacking at site (for W.B.M of 75 mm compacted thickness) stone aggregate of 63 mm to 45 mm size all as specified and as directed by Engineer In-charge.
Supplying & stacking at site (for W.B.M of 50 mm thick compacted thickness) stone aggregate of 53 mm to 22.40 mm size all as specified and as directed by Engineer In-charge.
Laying, spreading and compacting stone aggregate of specified sizes to W.B.M specification in Uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material ( stone dust ) to fill up interstices of course aggregate, watering and compacting to the required density as directed by Engineer In-charge.
Supplying & stacking at site murrum including transportation and all as directed by Engineer In-charge. (20 % deducation will accounted for payment towards voids and compaction allowncess from the measured quantity of stack)
Laying, spreading & compacting murrum with road roller 8 to 12 tonne for work in embankment under optimum moisture condition to give at least 95% of maximum dry density (Proctor density) as directed by Engineer In-charge.
Surface dressing on old surface with hot bitumen of grade VG-30 of approved quality using 1.95 Kg of bitumen per Sqm with 1.50 Cum of stone chipping 11.20 mm nominal size per 100 Sqm of road surface including consolidation with road roller of 6 to 8 tonne capacity etc. complete as directed by Engineer In-charge.
Surface dressing of the road side shoulder to remove uneven /inequaalities not exceeding 15 cm deep to maintain the slope from road edge towards shoulder outside end to drain / passout the road rain water and disposal / stack of murum / rubbish lead upto 50 m and lift upto 1.50 m for reuse.
Filling available excavated earth in shoulder of road in layers not exceeding 20 cm in depth consolidating each deposited layers by ramming and watering lead upto 50 m and for all lift.
Rupees Two Crore Seventy Lakh Thirty Two Thousand Seven Hundred Thirty Eight and Thirteen Paise Only
Approximate Basic Amount Put to Tender
Rupees Forty Eight Lakh Sixty Five Thousand Eight Hundred Ninety Two and Eighty Six Paise Only
Rupees Three Crore Eighteen Lakh Ninety Eight Thousand Six Hundred Thirty One Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
Etender_notice.pdf
TENDER_DOCUMENT • 0.46 MB
ECSDetailsForm.PDF
TENDER_DOCUMENT • 0.16 MB
SOW.pdf
TENDER_DOCUMENT • 0.35 MB
Prequalification.xlsm
TENDER_DOCUMENT • 0.02 MB
PriceBid.xlsm
TENDER_DOCUMENT • 0.08 MB
Tender_Document1597.pdf
TENDER_DOCUMENT • 1.68 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .