Works Contract for the execution of various works under Thuckalay Division

Loading&unloading of 9m PSC pole

Excavation of 9m pole pits(1.25m*0.6m*1.83m) in Normal Ground

Erection of 9m PSC pole in Normal Ground

Transportation of 9m PSC pole from road side to pole pit upto 2KM

Loading&unloading of 8m PSC pole

Excavation of 8m pole pits(1.25m*0.5m*1.5m) in Normal Ground

Erection of 8m PSC pole in Normal Ground

Transportation of 8m PSC pole from road side to pole pit upto 2KM

Set right of HT/LT leaning poles

Erection of Guarding X arm

Erection of V X arm 4.5 feet

Fixing of HT/LT TI fittings

Erection of Tapping channel X arm

Fixing of HT pin insulator

Fixing of HT strain disc 11KV

Fixing of LT S phase cross arm

Fixing of LT 3 phase cross arm

Fixing of LT pin insulator

Fixing of shackle

Fixing of aluminium knob

Excavation of stay pit (1.00m*0.5m*1.5m) in normal ground

Erection of stay set complete in normal ground

Paving and stringing of LT ACSR 7/2.59 conductor in pin point

Paving and stringing of LT ACSR 7/2.59 conductor in cut point

Paving and stringing of LT ACSR 7/3.35 conductor in pin point

Paving and stringing of LT ACSR 7/3.35 conductor in cut point

Paving and stringing of HT ACSR 7/4.09 conductors equivalent conductor in pin point

Paving and stringing of HT ACSR 7/4.09 conductors equivalent conductor in cut point

Coil earthing per pole & pole earthing

Concreting of poles as per board standards(2'*2'*5'). The material such as sand jelly etc have to be supplied by the contractor cement supplied by the contractor (Cement concrete mix 1:4:8 using 40mm hard broken stone including cost of labour charges for placing transporting of sand jelly from box and water curing for 14 days etc complete)

Coping of pole(0.6m*0.6m*0.35m)

Loading&unloading of line materials

Erection of additional support for single pole DT including painting

Erection of feeder cable with open type fuse unit per feeder and for each addl feeder

Bus bar arrangement with open type single pole and double pole

Erection of Distribution Transformer upto 200 KVA

Loading&unloading of Distribution Transformer below 250 KVA

Transportation of line materials from Section Office to work spot up to 20 KM

Transporting of Charges of DT/Line materials using private vehicle upto 20KM (up and down)

Painting of DT structure materials(Double coat) including cost of aluminium paint

Painting structure poles color paint with single pole structure materials with aluminium paint (by contractor)

Excavation of 4nos earth pits

Excavation of earth wire trenches and paving of earth wire, Erection of 4nos earth pipe and giving earth connection, Earthing of all metal parts, LAS etc including neutral connection

Fixing of Danger Board(including clamp and Board)

Hiring of Crane

Fixing of top channel

Fixing of cross bracing

Erection of AB switch

Erection of Bed channel

Erection of Bed Angle

Erection of H.G. Fuse

HT-LAS fixing

LT-LAS fixing

Single pole transformer Bed Structure

Street light Switching point arrangement with wire and switch including B type MS box with painting (supplied by contractor)

Providing Jumbering at Cut point

Drilling/less than 23mm hole per hole/slatted hole

Ordinary tree clearance

Erection of Single phase Service connection

Erection of Three phase Service connection

Dismantling of Single phase Service connection

Dismantling of Three phase Service connection

Dismantling & refixing of V X arm 4.5 feet

Dismantling & refixing of TI fittings

Dismantling & refixing of HT pin insulator

Dismantling & refixing of HT Disc

Dismantling & refixing of tapping cross arm 4.5 feet

Dismantling & refixing of LT S phase cross arm

Dismantling & refixing of LT 3 phase cross arm

Dismantling & refixing of LT pin insulator

Dismantling & refixing of shackle

Dismantling & refixing of aluminium knob

Dismantling & Restringing of LT ACSR 7/2.59 conductors in pin point

Dismantling & Restringing of LT ACSR 7/2.59 conductors in cut point

Dismantling& Restringing of conductors of LT ACSR 7/3.35 conductors in pin point

Dismantling& Restringing of conductors of LT ACSR 7/3.35 conductors in cut point

Dismantling and Reerection of feeder cable with open type fuse unit per feeder and for each addl feeder

Dismantling and Reerection Bus bar arrangement with open type single pole and double pole

Dismantling and Reerection of Distribution Transformer upto 200 KVA

Dismantling&Refixing of top channel

Dismantling&Refixing of cross bracing

Dismantling&Refixing of AB switch

Dismantling&Refixing of Bed channel

Dismantling&Refixing of Bed Angle

Dismantling&Refixing of H.G. Fuse

Dismantling&Refixing HT-LAS

Dismantling&Refixing LT-LAS

Dismantling&Refixing Single pole transformer Bed Structure

Dismantling&reexcavation of earth wire trenches and paving of earth wire, Erection of 4nos earth pipe and giving earth connection, Earthing of all metal parts, LAS etc including neutral connection

Dismantling&Reerection of LED lamp fittings

Dismantling & refixing of Street light Switching point arrangement

Dismantling of LT S phase cross arm

Dismantling of LT 3 phase cross arm

Dismantling of aluminium knob

Dismantling of LT pin insulator

Dismantling of stay set complete with fixing up stay wire Eye, Bow, Guy shackle, Binding etc

Dismantling of 9mtr PSC pole

Dismantling of 8mtr &7.5 mtr RCC,REC, PSC &metal pole including the closing of the pit

Dismantling of conductors of ACSR 7/2.59 Conductor in cut point

Dismantling of conductors of ACSR 7/2.59 Conductor in pin point

Please Enable Macros to View BoQ information