REPAIR TO TILING PLASTERING,SANITARY FITTINGS AND MISC B/R ITEMS IN SINGLE OFFRS ACCN IN DOMESTIC AREA AT AF STN YELAHANKA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surface of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc and brushing neat cement slurry with 3kg of cement per sqm

M&L for Vitrified tiles of 10mm thick and area of each tiles not exceeding 0.36 Sqm for flooring over 15 mm thick screed bed in CM 1:6 all as specified and directed.

M&L for Vitrified tiles of 10mm thick and area of each tiles not exceeding 0.36 Sqm as in skirting over 10 mm thick rendering in CM 1:4 dado/skirting finished all as specified and directed.

M&L for non skid coloured ceramic tiles 7 & 8 mm thick matt finish(square/ rectangular) area of ech tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screed bed 15 mm thick in CM complete all as directed and specified.

M&L for Glazed coloued Ceramic tiles of size 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado over 10 mm thick screed bed in CM 1:4 finished all as specified and directed in toilets ang kitchen.

M&L for Non skid coloured Ceramic tiles 7 to 8 mm thick and area of each tiles exceeding 0.11sqm but not exceeding 0.18 Sqm as in flooring over 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for Granite(of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishingtypes over 20mm thick screed bed in CM 1:6 all as specified and directed.

Rounding to edges of granite slab all as specified and directed.

Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level).

M&L for hard core of guage 63mm deposited, spread and levelled to a true surface.complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded agg) as in plinth protection finished even and smooth w/o using extra cement complete all as specified and directed.

M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’

Demolition of brick work or stone masonry built in CM incl all quions all as specified

Taking down cement plaster from walls of any description all as specified and directed.

M&L for brick work with sub class 'B' bricks , straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks , straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls

M&L for 15mm thick cement plaster in CM 1:4 on brick work or concrete surfaces rendering l is to be even & smooth without using extra cement on external wall

M&L for Complete removal of existing wall surface finish and applying two coat of oil bound distemper all as specified and directed.

M&L for Complete removal of existing wall surface finish and applying one coat of oil bound distemper all as specified and directed.

M&L for Complete removal of existing surface finish and applying one coat of oil bound distember on ceiling surfaces all as specified and directed

M&L for Complete removal of existing surface finish and applying 1-2 mm thick wall care putty at wall and ceiling surfaces all as specified and directed.

M&L for two coat of oil bound distemper on new surfaces over one coat of primer all as specified and directed.

M&L for preparation of surface and applying two coat of White wash on old wall surface all as specified and directed.

M&L for Preparing old painted wooden surface and applying one coat of Synthetic enamel Paint all as specified and directed.

M&L for Preparing old painted steel surface and applying one coat of Synthetic enamel Paint all as specified and directed.

M&L for preparation of the old surfaces unplastered of wall complete removal of existing treatment applying two coat of cement base paint ,complete all as specified and as directed.

S&F in repairs 1000 ltr capacity Rotational moulded polyethlene water storage tanks(cylindrical vertical with closed top) hoised and fixed in position all as specified and directed.

S&F 25mm Bore Ball brass valves high pressure, with polyethlene float and fly nut complete screwed for iron pipe or for brass ferrule.

Taking up or down 15mm steel tubing and connections all as specified and directed.

All as per item No 31 here-in-before but 20mm bore

S&F 20 mm dia of CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors complete all as specified.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.

S&F in Repairs plastic pedestal pattern seat cover with flat bottom and cover and MS chormium plated hanging type device all as specified and directed.

S&F in Repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

S & F in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe fixed in repair all as specified and as directed.

S & F in repairs vitreous china wash basin, white or coloured of size 550 x 400 mm with padestal including brackets all as specified and as directed.

S & F in repair Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” completed all as specified.

S&F in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified.

S & F in repairs Stop valve 15mm dia, concealed type chromium plate fancy type with long shank and cup complete all as specified.

S&F in repair Brass CP Mixer for hot and cold water screwed down for iron pipe and fixed for 15 mm dia complete all as specified.

S&F in Repairs sink cock in repairs fancy type complete all as specified and (table mounted)with 215 mm swivel spout complete all as specified and as directed. Make - Cera F2003302 or equivalent from the make specified.

S&F in repair 15 mm dia two way bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Make:Cera Model F3002152 or equivalent from the make specified in PS.

S&F in Repairs 15mm dia angle valves, cast copper alloy, CP, screwed down, high pre-ssure, with crutch, screwed both ends for iron pipe or for unions and fixed

S&F in repair Towel Rack with lower hanger (stainless steel), fixed in repairs, complete all as specified and directed. Make:Jaguar(Code No AHS-1581H) or equivalent from the make specified in PS.

S&F in repair gun metal globe gate valve 20 mm bore.

Supply and fixed in repairs PVC Cabinet mirror size of 500mmx4000mm. Make Prayag cat no-556.or equivalent from the make specified in PS.

Supply and Fixing in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed .

S& F in repairs Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore all as specified and directed at site.

S & F in repairs CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange as specified and as directed.

S&F in Repairs CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats fixed in repairs.

S & F Liquid soap container and including Chromium plated brass screws and wooden/plastic cleats, as specified and as directed. Make:- CERA F5002110 or equivalent from the make specified in PS.

S & F in repairs CP Towel ring of fixed with and including Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.

Supply and Fixing in repairs Stainless steel Toilet paper holder, make :Jaguar Model AKP 35753P or equivalent all as specified and directed.

S&F in Repairs stainless steel Soap dish fix to wall all as directed and specified. Make : Cera/Jaguar/Ess Ess or equivalent from the make specified in PS.

S&F in Repairs Corner glass shelf large, 300x300mm. Make:cera or equivalent from the make specified in PS.

S&F in Repairs glass shelf of size 12 cm wide x 60cm long for wash hand basin of cera

Supply and Fixing of 32mm waste pipe for wash hand basin all as specified and as directed

S&F Brass chromium plated bottle traps 32 mm for wash basins and urinal with inlet and outlet screwed for pipe or connections including necessary packing, union and cap fixed.

S&F PVC floor trap 110mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S&F PVC(SWR) floor trap 75mm dia, with grating including jointing to waste pipe fixed in solvent cement

S&F in Repairs PVC(SWR) Pipe s 110mm dia single soketed, in any length with rubber ring joints, laid in trenches or in floors

S&F in RepairsPVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors.

S & F in Repairs PVC (SWR) bends 75 mm dia in any radius with access etc.

S & F in Repairs PVC (SWR) 75mm dia junction (single 'T') equal or unequal with access door etc.

S & F in Repairs PVC (SWR) branch piece single (single 'Y') equal or unequal with access door including creating necessary provn in the existing PVC waste inlcuding jointing with rubber washer and solvent clamps etc.

S&F CP grating size 100mm

S&F in Repairs for brass CP Health faucet with 1.20m long flexible pipe and wall hook complete all as specified and directed. Make : Cera/Jaguar/Ess Ess

S&F in Repairs Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm all as specified and directed.

Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description

All as per item No 72 above but exceeding 1.5 sqm but not exceeding 4 sqm

M&L for taking down shuttes of any description exc 1 Sqm and n.exc 2 Sqm, cupboard shutters all as specified and directed.

M&L for taking down shuttes of any description and refixing in the same opening all as specified and directed.

Cutting holes in brick/stone walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0 ) using 12.5 mm graded aggregate ¸depth of embedded portion of hold fast not exceeding half brick

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet all as specified and directed.

M&L Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including neccessary fitiings etc complete as specified and directed.

S&F powder coated anodised aluminium frame and shutters with all fixing arrangements for doors, windows and ventilators with one or more rebates including joing cleat for fixing etc aluminium section of powder coating not less than 50 micron all as specified and directed.

S&f Powder coating Anodised aluminium door, window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified.

S & F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

S&F Continuous(piano) hinges,mild steel,bright finish of electrogalvanised 30 mm width of flap.

M&L for prelaminated particle board,19 mm thick interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work.

M&L for Cover fillets of standard 4.5 mm thick ness hard board, 40mm wide,and fixing with screws.

S&F 300 mm ordinary rat rail rod pattern springs incl roller and roller plate complete.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides

S&F flush door 30mm thick membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed by Engr - In Charge. Make:manufacture MAXON or equivalent as approved by GE.

S&F fly proof door 30mm thick membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed by Engr - In Charge. Make:manufacture MAXON or equivalent as approved by GE.

S&F 35mm thick 2 nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars,any numbers.edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats.

M&L preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 all as specified and directed.

S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets , cast or extracted section and fixing bolt and sliding bolts of extracted section.

S&F for aluminium anodised, barrel tower bolt 150mm of extruded section.

S&F for aluminium handle 150mm cast type anodised.

Supply and fix floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate.

S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane all as directed by Engineer-in-Charge

All as item 96 above but figured glass pin head type.

S&F sheet glass ordinary quality 5mm thick as in doors, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprime gasket all as directed by Engineer-in-Charge

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm all as specified and directed.

S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm all as specified and directed.

S & F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spike; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work water tanks and similer works conforming to Fe 290 Gde E-165.

S& F for aluminium powder coated drapery rod 32mm dia including suitable fancy type suitablre brackets on both ends fixed over 1st class hard wood rounded wooden blocks 0f 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws incl necesary drilling & finished with polishing Each opening shall have two fillets at both ends.

S& F aluminium powder coated fancy type suitablre brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks 0f 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws incl necesary drilling & finished with polishing Each opening shall have two fillets at both ends.

M&L for Keyed pointing in Cement mortar 1:4 to random or polygonal rubble all as specified and directed.

S&F as in repair Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr . Make :NIRALI,Blue star,Nilkhant or equivalent from the make specified in PS.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

Dismantling timber scantling 40 Sqcm and over in section in any position unframed work.

S&F steel work in tubular trusses including special shaped washer etc. complete butt welded tubes conforming to IS 1161-1979 grade st-240 .

S&F Prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified including dismantling of old sheet.

S&F Vitreous china urinals, bowl type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with automatic flushing cistern with brackets, flush pipe, waste pipe grating and union for discharge pipe fixed in repair, complete all as specified.

Two piece EWC with cistern, soft close seat cover and twin flushing fittings of size 655 x 400 x 760mm, Ivory colour with all accessories. Make : CERA, Model CALVINA Cat Part No : 2050, 2150, 2350, 2250 or equivalent as approved by GE.

S& F as in repair 15mm dia Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed.

Dismantling of old Ceiling boards (Fibre,pulp,insulation,etc) or insulation boards /slabs blankets,including cover fillets and frame work.

S&F of Armstrong Board 12mm thick in ceiling fixed with screws all complete as per manufacturer’s instructions .

S&F Anodized aluminium snap grid of size 605mmx605mm (Powder coated) frame work for false ceiling, including 4mm dia GI wire for hanging all as specified in SSR and as directed by Eng-in-charge.

PURVIK CONSTRUCTIONS

Mahant Construction Co.

Thirumala Construction

JITHU CONSTRUCTION COMPANY

chowdeshwariconstructionco

Lakkaiah Rangaswamy