EXPANSION OF ORBIO RBI KANPUR

Providing and fixing 6 mm thick (approximately) heavy-duty, machine-tufted modular tile carpet of commercial grade, "Gold Rated" of the design, shade and pattern approved by the Bank, as per the following specifications:- Surface preparation :- The existing floor finish shall be neatly cleaned by suitable device to receive the modular carpet flooring. If the flooring is found to be with any undulations in the level, the same has to be brought to uniform level with appropriate method. The modular tile carpet shall be - i) Method of construction tile carpet : Machine tufted ii) Surface Texture: Multi Level Patterned Loop. iii) Gauge: 47 rows per 10 Cms iv) Fibre type: 100% Solution Dyed Yarn v) Yarn weight: .≥ 565 Gms per SqMt. vi) Tile Size: 500 MM x 500 MM or other approved size vii) Modular Backing: The modular backing of the tile shall be an ultra-dense, five-layer cushion backing system (with a minimum of 30% recycled material), comprising two layers of Premium Vinyl Polymer and one layer each of Poly-Coat Polymer, Fibre Glass Scrim and Primary Backing. viii) Laying: The installation of the carpet tiles shall be done as per the directional method instructed and as per the manufacturer's specification. The Contractor shall visit and examine the site and satisfy himself as to the extent and magnitude of the work. The carpets shall be laid as per the design and layout provided by the Bank. The rate shall be inclusive of all charges for laying, fixing, adhesive, cartage, cutting, wastage, and all incidental expenses necessary to complete the work. Noted :- The basic cost of the Modular Carpet tiles: Rs 1614/- per sqm. excluding GST & CP. Noted:- Carpet must comply with relevant India / International codes .

Providing, fabricating and fixing wall panelling using standard MS rectangular sections of approved quality and make, fixed firmly to the floor at base and adjacent wall/ceiling as indicated in the following specifications: a) Vertical Members- MS box section 50x25x1.6mm spaced at approximately 600mm c/c fixed firmly on floor at base and ceiling/beam at top. All the vertical members shall be extended upto the ceiling/beam level with additional aluminium angle/cleat. The MS frame shall be painted with two coats of approved anti-rust steel primer. b) Horizontal Members- MS box section 50x25x1.6mm spaced at approximately 600mm c/c welded including additional members for raceway openings. The MS frame shall be painted with two coats of approved anti-rust steel primer. c) The framing shall be covered both side using 12mm thick HDHMR Board upto around 1 feet above false ceiling level and finish with laminate of 1.00 mm thick in decorative pattern as per design/direction of approval of Bank's Engineer. Note: Measurement shall be made on the exposed surface only upto false ceiling level.

Providing and fixing frameless glass partition using 12mm thick toughened glass including SS 304 grade patch fittings/clamps, connectors, brackets and all necesssary accessories required to complete as per the architectural drawings and the directions of engineer-in-charge with width of each glass panel not exceeding 1200mm. . The item includes providing additional MS section of 50x25x1.6mm at false ceiling level for providing supports to glass panels at top and the MS section shall be covered under false ceiling boards. With 12mm Frosted toughened glass as per approved itching design ( For BO and DBO Cabin)

With 12mm partly frosted partly clear toughened glass as per approved itching design (All other areas)

Providing, fabricating and fixing wall panelling using standard MS rectangular sections of approved quality and make, fixed firmly to the floor at base and adjacent wall/ceiling as indicated in the following specifications: a) Vertical Members- MS box section 50x25x1.6mm spaced at approximately 600mm c/c fixed firmly on floor at base and ceiling/beam at top. All the vertical members shall be extended upto the ceiling/beam level with additional aluminium angle/cleat. The MS frame shall be painted with two coats of approved anti-rust steel primer. b) Horizontal Members- MS box section 50x25x1.6mm spaced at approximately 600mm c/c welded including additional members for raceway openings. The MS frame shall be painted with two coats of approved anti-rust steel primer. c) The framing shall be covered top side using 12mm thick HDHMR Board uptoaround 1 feet above fals eceiling level and finish with laminate of 1.00 mm thick in decorative pattern outside of panelling as per design/direction of approval of Bank's Engineer. Note: Measurement shall be made on the exposed surface only upto false ceiling level. Basic Rate of Laminate to be considered as 645/- per sqm excluding GST