Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹33.8 L+₹77,891.50 (2.36%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹33.9 L+₹91,661.50 (2.78%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹36.1 L+₹3.1 L (9.46%)Rejected-Finance 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | JALANDHAR | PUNJAB | 144001 | L4 | Rejected-Finance L4 | |
| 5 | L5₹37.2 L+₹4.1 L (12.6%)Rejected-Finance | L5 | Rejected-Finance L5 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
30 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-09/2023-2024 WELCOME MAINT OF OFFRS MD ACCN IN SECTOR B AND DEF CIV MD ACCN UNDER AGE B/R II AT CHANDIMANDIR
2023_MES_594008_1
GE/CHM-09/2023-2024
Open Tender
Civil Works
Item Rate
270 days
CHANDIMANDIR
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GARRISON ENGINEER
₹98,000
Yes
23 Jun 2023
9 May 2023
6 Jun 2023
9 May 2023
30 May 2023
23 May 2023
Amount
Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.
75mm thick PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in flooring, finished fair and even without using extra cement complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premisses, complete all as specified and directed.
Glazed ceramic tiles, coloured in vertical surface 300mmx450mmx 7mm thick, joint free, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.
Non skid ceramic coloured tiles of size 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, superior quality as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in cement mortar (1:6) complete all as specified & directed by Engineer-in-charge
Vitrified coloured ceramic tiles 8-10mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed
All as per serial item No 6 herein before but on skirting etc over and including 10mm thick rendering in cement mortar 1:4
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places out side the premises complete all as specified and directed.
15mm thick rendering cement plaster in Cement and Sand mortar 1:6 over concrete /brick surfaces finished even and smooth without using extra cement complete all as specified & directed.
15mm thick rendering cement plaster in Cement and Sand mortar 1:4 over concrete /brick surfaces finished even and fair complete all as specified & directed.
10mm thick rendering cement plaster in Cement and Sand mortar 1:3 over brick work or concrete surfaces finished even and fair, as in ceiling, chajjas, facias, at any position, complete all as specified and directed.
Preparation of new plastered/RCC ceiling surfaces and applying three coats of white wash complete all as specified and directed
Preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.
Applying two coats of oil bound distemper on new plastered wall surface over a coat of primer including preparation complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work complete all as specified & directed by Engineer-in-charge.
18-19mm thick pre laminated particle board (ISI Marked), interior grade, pre laminated one side with decorative choice lamination and other side balancing white lamination as in cup board, kitchen cabinets shutters etc, including 6mm thick teak wood lipping on exposed edges fixed with nails, fixed as in repair complete all as specified and directed .
6mm thick , 18-19mm thick wide wooden lipping on prelaminated boards fixed with headless nails complete all as specified and directed.
Continous piano hinges, mild steel bright finish width of flap 40mm, fixed as in repair complete all as specified and directed.
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each, and removal from site complete all as specified & directed.
Solid PVC frame (Single Rebated) of size 75mm x 50mm made out of solid PVC foam with homogenous fine cellular structure density 750 having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design ,solid PVC foam with homogenous fine cellular structure density 750 having smooth outer integral skin, supplying & fixing in frame at site complete all as specified and directed.
Factory made pressed steel frames of profile width 125mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate rebate including necessary fixing lugs, hinges, lock strike plate, etc, and back filled with PCC 1:3:6 type C-1 complete all as specified.
35mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides all as specified & directed by Engineer-in-charge.
Glazed and gauged Skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, complete all as specified & directed.
Powder coated aluminum anodized frame/shutter/ chowkhat (thickness or powder coating of any colour coating not less than 50 micron) for doors, windows, partition etc with one or more rebates including joinging cleats for fixing etc standard anodized aluminum section, complete all as specified and directed Note : (i) Thickn (ii) Glazing / gauzing shall be measured and paid sapartely . (ii) Items shall be paid as per weight of a section as in door frame and frame of aluminum partition/ doors/ windows / ventilator/ shutter (iii) The rate quoted shall be inclusive of neoprene beading , aluminium snap beading, glazing clips, cleats, screws, roller and locking arrangement. (iv) Door closer shall be measured and paid separately
Steel window as in repair, box type, primer coated, 1.00mm wall thickness, with glazing bar and openable shutter prepared to recieve sheet glass, complete including cutting holes, four Nos. for each window and making good dismantled portion in PCC (1:2:4) type B-1. including following fittings welded to frame/ shutter:- (a) Hold fast 150mm out of 25x6mm flat iron made to shape- 04 Nos. each window (02Nos. on each side). (b) Handle of 'Z' section 20mmx25mm, 100mm long- 01No. each leaf. (c) MS tower bolt 150mm long- 02 Nos. each leaf. (d) 'Z' section 20mmx25mm, 100mm long stopper 01 No. each leaf. (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 guage wall thickness, welded to hinge of 55mm size 01 No. per leaf. (f) MS box type hinges of 75 mm size- 02Nos. per leaf. (g) Fabrication & fixing complete. Note: Glass panes & painting shall be measured & paid separately under respective item.s. Design shall be approved from Engr-in-Charge as existing at site and all as per Drawing before fabrication and bulk order to the manufacturer.
All as per serial item No 29 hereinbefore but without glazing bar.
All as per serial item No 28 hereinbefore but in fixed type ventilator with glazing bar.
3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Square Metre in each panes complete all as specified and directed.
4mm thick tinted sheet glass fixed to aluminum frame work with standard anodized aluminum snap beading, rubber packing, aluminum screws etc in panels exc 0.5 Square metre in each pane, complete all as specified & directed. NOTE:- Aluminum beading rubber packing and screws etc are not included in this item and the same paid separately under respective items.
Hacking out old broken glasses (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed by Engineer-in-charge.
Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with stainless steel wire staples complete all as specified & directed.
Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with stainless steel wire staples fixed as in repair complete all as specified & directed.
150 mm mild steel ordinary rat tail rod pattern spring including roller and roller plate, fixed as in repair complete all as specified and directed
200mm aluminium anodized barrel tower bolt of extruded section fixed in repair complete all as specified and directed
100mm aluminium anodized barrel tower bolt of extruded sectionsection fixed in repair complete all as specified and directed
250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed.
150mm size aluminum handle cast type anodized, complete all as specified and directed.
100mm size aluminum handle cast type anodized, complete all as specified and directed.
Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Taking up or down steel tubing and connections including cleaning for refixing or removal to store of 15 mm bore complete all as directed by Engineer-in-charge.
15mm dia concealed GI tubing medium grade with all fittings to walls, ceiling or laid under floors including cutting chases and making good in cement mortar 1:3 complete all as specified and directed.
Vitreous china, wash down water closet pan, white, Pedestal pattern WC with ‘P’ or ‘S’ trap, (excluding, flushing cistern and flush pipe), fixed as in repair complete all as specified and directed.
Plastic water closet seat cover white closed pattern with flat bottom mild steel chromium plated or aluminium hinging device, fixed as in repair complete all as specified and directed.
Hand jet chromium plated (health faucet with 01 m PVC pipe) for 15mm bore with fittings, fixed as in repairs complete all as specified and directed.
Chromium plated jet for EWC for 15mm bore with fittings, fixed as in repair, complete all as specified and directed.
Vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, set with cement concrete, fixed as in repair, complete all as specified & directed.
PVC valve less syphonic action flushing type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for English squat pattern WC, set with concrete and making good to floor, fixed as in repair complete all as specified & directed.
Wash hand basin, vitreous china, flat back , white of size 550X400mm, including brackets of suitable size, fixed as in repair complete all as specified and directed.
Central hole Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed.
Wall Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed
Bath cabinet of size 622mm x 422mm fixed to wall with rawl plugs having arrangements to put inside toiletries, fixed as in repairs complete all as specified and directed.
Sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and wastes, overall size 915 x 460mm, bowl size 410x330x160mm incl fixing cantilever brackets and connection to union, pipe, fixed as in repair complete all as specified and directed.
Sink mixer with swinging spout (wall mounted model), cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed.
Angular stop valve, fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.
Bib tap, fancy type cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.
Plate rack made out of 1.00mm stainless steel sheet of size 900mmx 750mm with steel shelves and hanging arrangements for utensil, fixed as in repair complete all as specified and directed.
Framed work such as grills, grating, framed guard bars, walk ways, railings etc. using steel conforming to Fe-310-O or Fe-410-O fixed as in repair complete all as specified and directed.
110mm bore PVC (SWR) bends any radius, fixed as in repair complete all as specified and directed
PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed as in repair complete all as specified and directed
75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement in repair complete all as specified & directed by Engineer-in-charge.
25mm dia drapery rod, with brackets and end caps fixed as in repairs complete all as specified and directed
Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.
Brick work with sub class ‘B’ bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4, complete all as specified & directed.
Brick work with sub class ‘B’ bricks of class designation 10 (min. compressive strength 100Kg/sqcm) old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed.
Preparation of old decorated plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified.
Preparation of old decorated plastered surfaces of walls and applying one coat of white wash complete all as specified.
Preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete all as specified.
Preparation of old decorated plastered surfaces of ceiling and applying one coat of oil bound distemper complete all as specified.
Complete removal of existing treatment by using of wire brush /mechanical grinder including washing rubbing down and stopping of distempered or painted surface and applying wall care putty of 2 to 3 mm thick over and including a coat of wall primer, smoothening the surfaces with sand papers etc.and applying two coats of oil bound distemper using hand roller, complete all as specified and directed.
Preparation of old plastered or unplastered surfaces of walls and applying two coats of wall care putty and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and directed.
Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Applying one coat of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth including preparation of old surfaces complete all as specified & directed.
Applying one coat of exterior emulsion paint on old plastered surface of walls inluding preparation complete all as specified and directed
Demolition of stone slabs of any description in floors laid, bedded and pointed in any mortar complete all as specified and directed
18-20mm thick granite slab (of any type & shade as approved), width and length as ordered on cooking platform, counter slab etc and jointed with neat cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing,over screed bed 15mm thick in cement mortar 1:6 including cutting / rounding of edges where requried complete all as specified and directed.
Demolition of RCC water tank of any capacity, removing all the rubbish and making good the surface with cement 1:2:4 as per existing specification complete all as specified and directed
500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position, including tank nipple, complete all as specified and directed.
Brass stop valve, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 20mm bore pipe, complete all as fixed as in repair specified and directed.
Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of 15mm dia and fixed in repair complete all as specified & directed.
Plain cement concrete 1:2:4 type B-0 using 12.5mm graded aggregate as in roof kerbs or mud stops rounded or chamfered on edges, complete all as specified & directed.
20mm thick rendering in Cement and Sand mortar 1:4 over roof slab and sunken portion finished even and fair mixed with water proofing compound, including dimantling of the existing roof slab / suken portion complete all as specified. (NOTE : WPC will be measrued and paid separately)
PCC 1:2:4 type B-0 (using 12.5m graded crushed stone aggregate) , as in padding over roof, mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. NOTE : (water proofing compound to be measured and paid separately)
Applying evely a coat of blown type bitumen at the rate of 1.50 Kg per square metre and blinding with clean dry sand @ 0.05 cum per sqm, complete all as specified & directed.
Flush pointing to brick tiles laid flat in roof in cement mortar 1:4 including racking out joints/ pointing complete all as specified & directed.
75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base etc, finished even and rough complete all as specified and directed.
Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment complete all as specified & directed.
Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) complete all as specified & directed.
Factory made cement concrete tiles 25cm x 25cm x 22mm thick (with grey cement and no pigments), set, jointed and pointed in neat cement slurry with grey cement , laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed
3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid over a coat of oil boubd bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS. The membrane shall be laid using butane torch and sealing all joints etc having 75mm side lap joint and 100m end lap joint after preparing the surface as per standard practice and as per manufacturer instructions and finished complete all as specified & directed.
Cleaning of water storage PVC service tank by disconnecting existing tank, setting aside (or lowering if reqd) for cleaning & removing the scale, dirt etc from tank & connecting & refixing in position. After cleaning, the date of cleaning with size of letters 3" to be written with synthetic enamel paint for capacity of tank exceeding 500 Ltrs but not exceeding 1000 ltrs complete all as directed by Engineer-in-charge.
Magnet catcher for cup board shutter, kitchen cabinets, ward robes in repair complete all as specified.
Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges, all as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
Pre-painted galvalume aluminum zinc coating (AZ-70) GI based corrugated steel sheet 0.50mm thick in any colour and patteren as approved by the GE of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.
Rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated) conform to Fe-290 Gde E-165 as grating over drain etc, complete all as specified & directed
Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide, zinc chrome complete all as specified and directed.
All as per item No 99 here-in-before but except primer
MS R G ENTERPRISES
M/s Om parkash
S S CONSTRUCTION
Gunjan and Gunjan Associates
KUNDRA CONSTRUCTIONS
M/s Super Trading Corporation
RAJESH KUMAR
Standard Const. Co.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .