Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹1.8 LAccepted-AOC HARDI BAZAR DIST KORBA CG 495446 | KORBA | CHHATTISGARH | 495446 | L-1 | Accepted-AOC Accepted as the bidder attains L-1 status | |
| 2 | L-2₹1.9 L+₹35,400 (23.6%)Rejected-Finance | L-2 | Rejected-Finance Rejected as the bidder attains L-2 status | |
| 3 | L-3₹2.2 L+₹65,800 (43.8%)Rejected-Finance GAYATRI SADAN PALI ROAD DIPKA DISTT KORBA C G 495452 | DIPKA | KORBA | CHHATTISGARH | 495452 | L-3 | Rejected-Finance Rejected as the bidder attains L-3 status |
| Sl No | Description | Qty | Unit | DINESH KUMAR L1 | A. K. Rakesh (Arvind Kumar Rakesh) L3 | M/S RAJENDRA SINGH L2 |
|---|---|---|---|---|---|---|
| 1.00 | Installation of pump-motor set on bed plates including dismantling and refitting of foot valves, bends, short pieces, non-return valves, sluice valves, jetting hoses, suction and delivery pipes etc. | 1 | Job | 4,400 ₹4,400 | 20,000 ₹20,000 | 500 ₹500 Lowest |
| 2.00 | Laying and jointing of MS pipeline, Size: 200mm and other activities including loading, unloading, transportation and placement as per instruction of Engineer Incharge | 650 | Mtr | 200 ₹1,30,000 Lowest | 265 ₹1,72,250 | 268 ₹1,74,200 |
| 3.00 | Welding of tapered joints suitable for Size: 200mm at slope terrains/ road crossings/ locations for places where fixing of bends are not feasible, including cutting/ welding and other allied works/ places as directed by Engineer Incharge | 15 | No. | 720 ₹10,800 | 500 ₹7,500 Lowest | 500 ₹7,500 Lowest |
| 4.00 | Welding for clitting of pipeline ranges, Size: 200mm at slope terrains/ road crossings/ locations including cutting/ welding and other allied works/ places as directed by Engineer Incharge | 20 | No. | 140 ₹2,800 | 600 ₹12,000 | 50 ₹1,000 Lowest |
| 5.00 | Fixing of non-return valves, Size: 200mm | 1 | No. | 400 ₹400 Lowest | 1,500 ₹1,500 | 400 ₹400 Lowest |
| 6.00 | Fixing of CI Sluice valves with wheel, Size: 200mm | 1 | No. | 400 ₹400 Lowest | 1,500 ₹1,500 | 450 ₹450 |
| 7.00 | Supply and fixing of MS Nut and Bolts of different sizes | 15 | Kg | 100 ₹1,500 | 90 ₹1,350 Lowest | 110 ₹1,650 |
| 8.00Note: 1). The estimated cost is excluding CMPF @ 12% and CMPS @ 7%. These statutory payment as applicable shall be reimbursed to the contractor on production of proof of payment limited to the maximum likely number of workmen to be deployed per day is 06 nos. 2). Industrial gas, welding electrodes, welding machine, tools and tackles, safety equipments etc. is in the scope of the contractor. | ||||||
| 9.00 | Total impact of GST for the purpose of CTC | 1 | Nos | - | - | - |
Tender Value
₹3.5 L
EMD Value
₹4,500
Closing Date
18 Jun 2025, 5:00 pmClosed
Staff Officer (EnM)
Office of the General Manager, Dipka Area, Ph. No. 9424141353
Installation of 01 no. pump-motor sets at KCC Coal patch along with laying and jointing of pipeline at Dipka Expansion Project.
2025_SECL_336719_1
SECL/GM/DA/SO(EnM)/ e-tender/25-26/34 dtd-31/05/25
Open Tender
Electrical and Maintenance Works
Item Rate
15 days
Dipka Expansion Project, Dipka Area
Please refer to tender documents
4 documents required · 4 mandatory
₹4,500
13 Sept 2025
2 Jun 2025
20 Jun 2025
2 Jun 2025
18 Jun 2025
3 Jun 2025
2 Jun 2025 - 9 Jun 2025
Amount
Installation of pump-motor set on bed plates including dismantling and refitting of foot valves, bends, short pieces, non-return valves, sluice valves, jetting hoses, suction and delivery pipes etc.
Laying and jointing of MS pipeline, Size: 200mm and other activities including loading, unloading, transportation and placement as per instruction of Engineer Incharge
Welding of tapered joints suitable for Size: 200mm at slope terrains/ road crossings/ locations for places where fixing of bends are not feasible, including cutting/ welding and other allied works/ places as directed by Engineer Incharge
Welding for clitting of pipeline ranges, Size: 200mm at slope terrains/ road crossings/ locations including cutting/ welding and other allied works/ places as directed by Engineer Incharge
Fixing of non-return valves, Size: 200mm
Fixing of CI Sluice valves with wheel, Size: 200mm
Supply and fixing of MS Nut and Bolts of different sizes
Note: 1). The estimated cost is excluding CMPF @ 12% and CMPS @ 7%. These statutory payment as applicable shall be reimbursed to the contractor on production of proof of payment limited to the maximum likely number of workmen to be deployed per day is 06 nos. 2). Industrial gas, welding electrodes, welding machine, tools and tackles, safety equipments etc. is in the scope of the contractor.
Total impact of GST for the purpose of CTC
M/S RAJENDRA SINGH (BID ID -1161610)
A. K. Rakesh (Arvind Kumar Rakesh) (BID ID -1161654)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .