Providing WSS Pangi Nallah to Kalpa Tehsil Kalpa Distt.Kinnaur H.P

Amount

Excavation in foundations in all kinds of soil such as pick work ,jumper work, blasting hard or soft rock chiseling where blasting is prohibited or saturated soil , lift upto 1.50 mtr stacking the excavated soil not more than 3.00 mtr clear from the edge of the excavation and then returning the stacked soil in 15 cm layers when required into plinth sides of foundation consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth as directed with a lead of 20 mtrs. P/J Work.

Providing and laying cement concrete 1:3:6 (1 cment:3 sand: 6 graded stone agg. 40mm Nominal size) and curring complete excluding the cost of form work in foundation & plinth

Providing and laying cement concrete 1:4:8 (1 cment:4 sand: 8 graded stone agg. 40mm Nominal size) and curring complete excluding the cost of form work in foundation & plinth within all leads and lifts complete.

Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement for feinforced concrete work in:

Foundation footings bases of columns and the like and mass concrete.

Wall (any thickness but not less than 0.1 m thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level upto floor two level :

Providing and laying cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in:- Suspended floors ,roofs,landing and shelves and their support, balconies ,beams, girders,bressumers and centileaver upto floor two level.

Providing and laying cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in:- Foundation and plinth

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillaster buttresses, plinth and string courses and the like with in all leads and lifts.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Lloors etc. upto 200mm. In thickness with in all leads and lifts.

Providing tor steel reinforcement for RCC work including bending binding and placing in position complete upto floor two level to the entire satisfaction of the Engineer in charge.Tor steel with in all leads and lifts.

Providing and placing horizontal layer of filtering media. duly graded screened washed and cleaned as specified by the Engineer-in-Charge.

Broken Stone 50mm to 75mm

Bajari 20mm to 25mm

Bajari 6mm to 20mm

Course Sand 3mm to 6mm

Fine Sand

Providing and Fixing MS manhole cover with frame and stair case of M.S sheet and angle size 450X450mm ( weight of Man hole & stair case are not less then 35Kg & 75 Kg) including cutting and welding charges.

Laying ,Jointing & Testing in treanches GMS tube (MG) and tube fitting (earth work in trenches to be measured and paid seprately) as per the direction of the Engineer-in-Charge including all fittings complete.

125 mm dia

Providing and Fixing Controlling arrangment i;e wheel valve complete with in all leads and lifts to the entire satisfaction of Engineer-in-charge.

125mmdia

AJEET KUMAR

Jai Chand Rana