PROVISION OF ADDITIONAL ROOMS AND CERTAIN CONNECTED WORK SERVICES IN BLDG NO P-63A (KINDER GARTEN) AT COAST GUARD UNDER GE HADDO, SRI VIJAYA PURAM

Amount

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 m in depth, for foundation etc.,not exc. 10 Sqm on plan and n.exc. 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling incl spreading, levelling, watering and well ramming layers not exc 25cm for cable laying.complete all as specified and directed.

Removing/excavated soil to a distance not exc 50 M and depositing where directed at a level not exc 1.5m above the starting point all as specified and directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed

S&F PVC (SWR) 110mm dia bend of any radius and jointed with approved adhesive complete all as specified and directed

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) for concrete bed of 10cm thick, to drain pipes of 100mm dia, including packing under and haunching against the side of pipes after they are laid and tested,complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry with solid block, masonry exc 10cm width in PCC l:3:6 type C1 using 20mm graded stone aggregate built in CM 1:6.Complete all as specified and directed .

M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls or concrete surface finished the surface even and smooth without using extra cement complete all as specified.

M&L for PCC 1:3:6 type C1 (using 20mm graded aggregate stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, lightly rounded or chamfered angles and throating complete all as specified and as directed

M&L for PCC 1:2:4 type B2 as in surface channel and drain and benching of manhole and finishing even and smooth without using extra cement complete all as specified and directed.

M&L for pre-cast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in cover slabs of manholes, drains, culverts and setting in cement mortar (1:6) complete all as specified and as directed.

M&L for mild steel TMT bars 6mm to 8mm dia as in reinforcement for cover slab, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.

Demolition of cement concrete as in block masonry built in cement mortar complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof coverings complete all as specified and directed

Dismantling structural steel work complete all as specified and directed.

Taking down aluminium windows, or door frames area exc 1.50 Sqm and not exc 4.0 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed

M&L for use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished surfaces of concrete flat complete all as specified and as directed.

M&L for use and waste of formwork to sides of pillars, posts, struts, piers, columns etc., for rough finished surfaces of concrete flat complete all as specified and as directed.

M&L for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., for rough finished surfaces of concrete flat complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for Mild steel TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for reinforced cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc., basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for reinforced cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L for reinforced cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in lintel beams, roof beams, Chajjas complete all as specified and as directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M&L for 10mm thick plaster in CM 1:6 on fair face of concrete surface or brick walls finished even and smooth without using extra cement complete all as specified

M&L for preparation of newly plastered surfaces of walls of any description and applying two coats of distemper oil emulsion over a coat of primer after levelling the undulations if any with cement putty complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed

M&L for hardcore using broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base and pavings complete all as specified and as directed.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed

All as per Item No. 34.00 but as in skirting / dado / etc including backing coat 10mm thick in cement mortar 1:3 complete all as specified and directed

S&F for anodoised aluminium powder coated snap grid frame work for ceiling 605mm x 605mm using aluminium anodised sections aluminium sections main tee 36.5X25X1.4mm, cross 23.5X26.4X1.4mm, angle 25X25x1.4mm including cutting, drilling jointing etc complete including 6 mm dia of GI hangers wire suspenders fixed with adjustable connectors and providing 4 mm thick E-boards (Classic) 605mm x 605mm size Specified by Engr-in-charge and making good etc complete all as specified and as directed.

M & L for seamless false ceiling made out of 12mm thick of gypsum board fixed to the ceiling section with 25mm long self drilling and tapping screws having Philips head with under head cutter at 200mm centre to centre, including finishing the joints of face board with specially formulated joining compound and 48 mm wide fibre tape to provide seam less finish and including GI channel 0.55 mm thick with two unequal flanges of 20 to 30mm and web of 27 mm fixed to surrounding wall using nylon sleeve and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffits at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.20mtr length) of 0.55 mm thick having kurled web of 50 mm and flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including 6mm thick GI hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40x3 mm size long and expansion hold fasteners 12.5mm dia 40mm long including thin layer of Pop with Gypsum binder, sanding the surfaces till smooth surface is obtained and finally applying two coats of acrylic emulsion over one coat primer over 3mm thick putty all as specified and as directed

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators, partitions and shutters with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

Supply only plain sheet glass 5mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter exc 0.5 Sqm in each pane.

M&L for 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balacing white lamination, fixed with screws to aluminium frame work or doors etc all as specified and as directed.

Supply only plain sheet glass 5.5mm thick ordinary quality and glazing with aluminum glazing clip in aluminum window shutter not exc 0.5 Sqm in each pane.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube ,all as per specifications and drawings given in SSR 2020.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour pvc sheet for top rail and bottom rail ,pannelling of plain colour pvc sheet to be fitted in the MS frame welded/ sealed to the styles and rails with suitable pvc sheet beading and jointed togrther with solvent cement S&F in the frame at site as per specification and drawings given in SSR 2020.

S&F in butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 etc complete all as specified and as directed.

S&F extruded aluminum alloy handle fabricated type anodized 150mm long etc complete all as specified and as directed.

S&F Aluminum anodized barrel bolt of extruded section 150mm long etc complete all as specified and as directed.

S&F 300 mm long aluminium anodised sliding door bolt with hasp and staple ( bolt type ) and fixing clips of sheet sliding bolts of extruded sections and fixing bolts and sliding bolts of extruded section all as specified

S&F for floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring, fixed in floor (140mm size), complete all as specified and directed.

S&F door closer hydraulically regulated aluminium (die cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified

Supply only aluminium alloy wire cloth 0.45 mm nominal dia of wire and average with of aperture 1.40 m and fixed with aluminium wire staples all as specified and directed.

Demolition of stone slabs and tiles of any description laid bedded and pointed in mortar all as specified and directed..

M&L for 20 mm thick granite( of any type)(table rubbed and polished) in cooking plat forms, steps, cills, pillars and like in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granie including 15 mm thick Screed bed CM 1:4 all as specified . Note : Colour of granite shall be as approved by Engr-in-Charge.

S&F PVC (SWR) pipe 110mm bore, single socketed, in any length including bends, socket etc with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed

S&F PVC (SWR) pipe 75mm bore, single socketed, in any length including bends, socket etc with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed

S&F for 110mm dia PVC (SWR) bends with acess door any radius complete all as specified.

S&F for 75 mm dia PVC (SWR) grade bends of any radius etc complete all as specified and as directed.

S&F for 75 mm dia PVC (SWR) grade bends with acess door of any radius etc complete all as specified and as directed.

M&L in repairs PVC (SWR) multi floor trap 75mm with openable or hinge type grating including jointing with solvent cement complete all as specified.

S&F vitreous China ware under counter one piece wash hand basin , white of size 460x310x220mm including CP waste coupling, waste fittings, and all necessary inlet, outlet connections complete all as specified and directed. Make: Cat No.4793 (MALL) of Prayag or Equivalent approved. Make : PRAYAG, H&R Johnson (India) Ltd

S&F Push taps (Pressmatic Auto closing taps) suitable for wash basin fancy type etc screwed down for Iron pipe and fixed etc complete all as specified and directed. Make: Code: PRS-CHR-031of jaguar or Equivalent in PRAYAG, Parryware.

S&F CP two way bib taps 15mm cast copper alloy fancy type with wall flange screwed down for Iron pipe and fixed etc complete all as specified and directed. Make: Cat No. 9012 (EUROPA) of Prayag or Equivalent in JAQUAR, Parryware.

S&F Hand shower (health faucet) with 1.0mtr long fllexible tube with wall hook. Make: Cat No. BEA-101 of Prayag or Equivalent in JAQUAR, Parryware.

S&F CP Angular stop cock fancy type with wall flange screwed down for Iron pipe and fixed etc complete all as specified and directed. Make: Cat No. 6810(MARCUS) of Prayag or Equivalent in JAQUAR, Parryware.

S&F white vitreous china wash down water closet pan (pedestal pattern) with PVC seat cover with mild steel chromium plated or aluminised hinging device including connection to drain pipe and to flushing pipe all as specified.

M & L for PVC valveless, syphonic action type flushing cistern of 10 litres capacity, white colour, with inlet, ball valve, float and handle inclufing brackets all as specified and directed

S&F Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F vitreous China urinal with top inlet, half stall type coloured complete fixing with suitable fixing arrangements to wall with and including cp urinal spreader, CP domed 32mm bore dia waste coupling and waste pipe complete all as specified and as directed.

S&F Push taps (Pressmatic Auto closing taps) suitable for urinals fancy type with wall flange screwed down for iron pipe and fixed etc complete all as specified and directed.Make: Code: PRS-CHR-077of jaguar or Equivalent in parryware / Prayag.

S&F for 50mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcm including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and directed.

S & F PVC connection 15 mm size with PTMT nut of length 600 mm long all as specified and directed.

S& F for 20mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcn including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and directed.

S& F for 25mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcm including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and directed.

Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, ISI marked (cylindrical vertical with closed top), 1000 litres capacity, hoisted and fixed in position all as specified in SSR Part I, 2009 including 25mm dia or bore PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball (minimum weight 455gms) screwed for iron pipe, provision of 40mm/25mm spouts for connecting inlet, outlet, over flow and washout pipes complete all as specified and as directed.

S&F sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F for in 15 mm bore bib taps cast copper alloy chromium plated with crutch handle or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Dismantling Aluminium Partitions with glass or panels, etc safely fixed in any position and of any description etc all as specified and directed.

M&L for 18mm thick HDF boards (fire & water proof) as in Cub boards, cabinet, shelves etc and the like with an including two coats of syntheticenamel spray painting glossy finish over a coat of primer incl preparation of surface etc complete all as specified and as dierected.

M&L for Auto concealed hinges, stainless steel grade AISI-316 type (Austenitic anti-corrosive in nature) suitable for kitchen cabinets, Cupboards, shelves etc complete all as specified and as directed.

S&F Magnetic catcher with plate glossy finish for drawer / cabinet of size not less than 50mm, etc complete all as specified and directed.

M&L for stainless steel hollow sections circular/square/rectangular in shape and any size and thickness, grade AISI-316 type (Austenitic anti-corrosive in nature) as in railings/grills/designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixed in any location complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge etc fixed with self tapping screws as specified

S&F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed

M&L for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars and similar work conforming to Fe-290 Grade E-165 complete all as specified and as directed.

M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed

M&L plain aluminium flat section not less than 0.68 Kg per RM as in wind tie fixed with aluminium self tapping screws complete all as specifed

M&L for complete removal of existing treatment of surfaces of walls and applying 2 to 3 mm thick wall care putty for levelling the surface and applying two coats interior plastic emulsion paint as in Texture painting (Roller finish) over a coat of alkali resistant primer with glossy finish epoxy top coat. Note: Shade/ Design will be finilized by the Engr-In-Charge

M&L for preparation on newly plastered external wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed. (Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard or equivalent).

M&L for preparation & cleaning of floor or chequered tile surface and applying one coat of terracota paint etc complete all as specified and directed.

M&L for 100mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, made of grey cement and pigments, machine pressed as in flooring, set, jointed and pointed in neat cement slurry laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC concealed/surface conduit of suitable size (not less than 20mm dia) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for the following:-

All as per Item No. 94 above, ONE LIGHT/FAN point controlled by one, one way 5 Amps modular switch.

All as per Item No. 94 above,TWO LIGHT points controlled by one, one way 5 Amps modular switch.

All as per Item No. 94 above, ONE 3 pin 5A SOCKET OUTLET point controlled by one, one way 5 Amps modular switch on independent board.

All as per Item No. 94 above, ONE 3 pin 5A SOCKET OUTLET point controlled by one, one way 5 Amps modular switch on same board.

All as per Item No. 94 above, ONE BELL point controlled by one, one way 5 Amps modular switch.

All as per Item No. 94 above but point wiring with two single core 4.0Sqmm size cables and one 4.0 sqmm green colour cable as earth continuity conductor for one 6 pin 16 Amps socket outlet on independent board

S&F modular switch, one way, one module, single pole, 6 Amps, 240 Volts AC complete all as specified and as directed. Make: Roma (Anchor) / Havells (Crabtree) / Legrand

S&F modular switch, one way, one module, single pole, 16 Amps, 240 Volts AC complete all as specified and as directed. Make: Roma (Anchor) / Havells (Crabtree) / Legrand

S&F modular socket, multipurpose, 2/3 pin combined, 2 module, single pole, 6 Amps, 240 Volts AC complete all as specified and as directed. Make: Roma (Anchor) / Havells (Crabtree) / Legrand

S&F modular socket, multipurpose, 2/3 pin, 6/16 Amps combined, 2 module, single pole, 240 Volts ACcomplete all as specified and as directed. Make: Roma (Anchor) / Havells (Crabtree) / Legrand

S&F modular bell push, one way, one module, single pole, 6 Amps, 240 Volts AC complete all as specified and as directed. Make: Roma (Anchor) / Havells (Crabtree) / Legrand

S&F electric bell, ding dong type, AC, 230 volts complete all as specified and as directed.

S&F in replacement of concealed cob/ spot LED light energy efficient of cap 4 watt (WH/WW/NW of colour) LED for low ceiling height applications round in shape, pressure die-cast aluminium housing, spring loaded clips for easy mounting complete all as directed . Make: Luker :-LCOB04 or Equivalent to Havells/Philips/CG

Supply and fixing of Decorative ultra slim linear LED lighting fixture of 15 Watt recess mounted 220V, 50Hz with Aluminium housing, environment friendly nergy efficeint fitting recess mounted round/ square in shape (Warm white/ white colour as per requirement of site complete) of light as required at site cpmplete all as apecified and directed. Make: Dura slim or equivalent make in CG/ Havells. Note: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting.

All as per Item No. 104.00 above but for 18 Watts

S&F in replacement of LED Strip light, 60 LED per metre, 24 watts with driver, 5 metre length, of any colour (WW/NW/CDL), including all fixing arrangement as per site requirement complete all as specified and directed. The cradle is provided for monitoring purpose all as directed. Make: Philips Model: Skycove or equivalent to CG/ Havells.

Supplying, fixing and testing Tube light fittings aluminium housing, Diffuser slim Integrated design LED 21 watts 4 feet, IP-20 including all accessories and fixing arrangenents for fixing the light fitting complete all as specified and directed. Make: Philips Cat Part No: BN021C LED22S or equivalent to CG/ Havells/ Luker

Supplying, fixing and testing Tube light fittings aluminium housing, Diffuser slim Integrated design LED 10 watts 2 feet, IP-20 including all accessories and fixing arrangenents for fixing the light fitting complete all as specified and directed. Make: Philips Cat Part No: BN021C LED12S or equivalent to CG/ Havells/ Luker

S & F BLDC 5 star rated ceiling fan metallic body ISI marked 1200 mm sweep, 220V Ac, 50 Hz complete with all accessories. Make: CG Model No : ENERGION Riviera with out remote 32 watt or equvalent make of Havells/Orient/ Usha /Bajaj/ Luker

Supply and fixing and testing LED Picture light fitting of cap 12 watt, bronzne, Aluminium materials, size-500 x 80 x 95, 420lm, 3000k with all fixing arrangements all as apecified and directed. Make- Havells Cat Part No: LHLDESAARANC020 or equivalent to Philips/ CG.

M&L for Sub main wiring complete with two runs of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed.

M&L for Sub main wiring complete with two runs of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE FOR ITEM NO. 111 & 112 : Three length of cable and one run of PVC conduit shall be measured as one unit length.

S&F DB, SPN, sheet metal enclosure double door suitable, IP-43 protection, 12-way 200 Amps rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete all as specified and as directed. MAKE: INDO ASIAN/ L&T/ LEGRAND/ ABB/ HAVELLS

Supplying & fixing MCB SPN 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed. MAKE: INDO ASIAN/ L&T/ LEGRAND/ ABB/ HAVELLS

S&F MCB, SP, "C" series, 240 volts, 6 to 32 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811122 to 811129 or equivalent in L&T/ LEGRAND/ ABB/ HAVELLS Note : for item No 114 to 115 : All copper conductors should be connected with MCB alonwith copper reducer terminals of suitable size duly crimpled.

M/s K Moorthi (BID ID -3168673)

Reliance Sales Agency (BID ID -3168239)

M/s Prem Enterprise (BID ID -3167822)

CHANDER SEKER ENTERPRISE (BID ID -3168600)

Nirman Construction Company (BID ID -3167792)

Sri Ram Construction (BID ID -3167593)

RPG AND COMPANY (BID ID -3168263)