Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹16,000
Closing Date
12 Apr 2023, 3:00 pmClosed
Commissioner Nagercoil City Municipal Corporation
City Municipal Coporation Office Nagercoil 629001 Ph.No. 04652231516
Nagercoil Corporation Maintenance work in Commissioners Quarters
2023_MAWS_299635_1
283/2022-2023
Open Tender
Civil Works
Lump-sum
90 days
Nagercoil Corporation Maintenance work in Commissi
Registered Contractor
4 documents required · 4 mandatory
₹0
₹16,000
18 Apr 2023
5 Apr 2023
12 Apr 2023
5 Apr 2023
12 Apr 2023
5 Apr 2023
Amount
Maintenance work in Commissioners Quarters
Dismantling ,clearing away and carefully stacking materials useful for re-use for any thick ness of wallsDismantling of pressed tiles and weathering course
Dismanling of Doors and windows
Supplying and laying cooling tiles
Supplying and paving the floor with design ceramic antiskid tiles of approved brand and quality (Colour/shade of the ceramic tiles shall be got approved by the departmental officers concerned) of size 200mm X 200mm x 6mm in all flooring over a base mortar using of cement mortar 1 : 3 ( One cement and three sand) 20mm thick laid in situ tructo alignment and pointed with colour cement (White cement mixed with colouring pigment) to suit the colour and shade of the ceramic tiles etc., complete complying with standard specification
Supplying fabricating and fixing in position of aluminium anodised ntural colour matt finish door half glazed and half PLB board / fully 12mm thick PLD board /fully 5.5mm thick glazed door using rectamgular Alu.Lox section of following sizes for frame and shutter with necessary accessories such as rubber beading,aluminium clips ,best double action floor springs / door closer ,handles locks and glass incuding all materials,labour and power consumption charges columns , booms , or masonry wherever with power drill to the extent required and made good to the original conditions after fixing etc.complete. The aluminium surface is to be anodised with matt finish under electrically controllee condition in accordance with SI specification 1000/1902 of andic film thickness of not less than 15 microns (fifteen) for all sections. All the materials should be got approved by the Engineer - in - charge before fixing in positioon as directed
Re pointing with old machine pressed tiles
Polishing and finishing old marble floor Finish
Painting two coats with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scribing clean remove of dire etc. complete and including cost of necessary plaster of paris, putty brushes, wherever required and all labour charges, scaffolding charges etc. complete as per standard specification
Painting two coats over old wood work with ready mixed paint of approved quality and colour including cost of all materials and labour charges, brushes and scaffolding charges etc. complete as per standard specification
Painting two coats over new iron work with ready mixed paint of approved quality and colour including cost of all materials and labour charges, brushes and scaffolding charges etc. complete as per standard specification
Supplying and fixing and finishing cup board and fitting
Suplying and fixing rigid PVC panelled door shutter made from M.S box section of size 19mm x 19mm,19guage covered with heat moulded PVC 5mm thick and width of 50mm to from styles and rails.The pael shall be 5mm thick PVC rigid foam sheet inserted into yhe frame sealed to the styles and rails and 5mm x 25mm PVC beading is provided on all sides with furniture fittings etc.,complete .43 PWD
Supplying and fixing short body tap
Supplying and fixing shower bath
Supplying and fixingin position of European water Closet glzed earthern ware of approved quality with p or s trap confirming to IS-2556 part xii with sand cushion and forming flooring alround the closet using 40mm broken jelly in lime concrete 1:2.5 mix 100mm thick and finishing the top required slope and including necessary connection to easr iron soil pipe by dismantling brick masonry RCC roof / floor slab and making the disturbed portion to original condition without leakage etc complete complying with std, specification and as directed by the departmental officers
Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications
Supplying and fixing 3 litre capacity water heater with necessary fitting
Supplying and fixing health fauat
20mm angle valve
supplying and fixing soap tray fitting
Supplying and fixing Berelled edge Mirror
25mm Ball valve
75mm dia Y
75mm Dia door elbow
75mm dia elbow
75mm dia shoe
75mm floor trap
Wirinng with 2x1.5sq.mm (22/0.3) PVC insulated SC. unsheathed Cu.Conductor of 1100V garade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light/fan point (for electronic regulator) (5 points per coil)(SD 22)
Supply and fixing of single box type 4'36 W flu fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting(SD 87)
Supplying and fixing of Bulb fitting
Wirinng with 2x1.5sq.mm (22/0.3) PVC insulated SC. unsheathed Cu.Conductor of 1100V garade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113mm TW switch box for 5A 3 pin non inter locking wall socket with 5A Flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC Plug point. (SD36)
Wiring with 2x4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.conductor cable of 1100V grade insuitable heavy gauge MS conduit pipe concealed in wall and ceiling with M.S accessories in flush with wall with 150mmx 100mmx75mm MS switch box concealed type with 3mm thick hylum sheet cover for 15A 3 pin flush type non interlocking C.S plug with continuous earth wire connection of 14SWG TC wire and Making good of the concealed portion with suitable colour for concealed power plug point(SD 15)
Supplying and fixing of AC point
Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm(18")(SD 106)
Supplying and fixing of Exhaust fan fitting
Supplying and fixing of 1.5 Ton AC fittings
Supplying and fixing of Run off service wire
Supplying and polishing wooden cot
Supplying and fixing window curtain and fittings
Supplying and fixing Mirror size 045x0.6
Supplying and fixing 3 burner prestige
Supply and fixing Dining table size (1.50x0.90)
Supply and fixing wooden table size
Supplying and fixing single cot mattres
Supplying and Fixing of Sofa with Cusain
Supplying and Fixing of Dressing Table
Supplying and Fixing of Tv with Stand
ExecutivSupplying and Fixing of Executive Char
Supply and Fixing of TATA SKY 2 TV
Supplying and Fixing Glass
Supplying fixing of Cycling GYM Materials
Supplying and Fixing of Multy GYM
Water Filter services
Sump, OTH, Syntax Cleaning 5 Labours
Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.
Supply and fixing of GI Ridge Sheet
Supply and fixing of Steels (Shed)
P.C. ANTHONI MARIYA GRATAS
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .