Construction of Staff Quarter/ Barrack on First Floor of Residential Office Building with Staircase and Supply of Furniture for Residential Office in the Campus of Secretary Residence (F-Type) at Harmu, Ranchi

Amount

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)

Filling in foundation trenches and plinth in layers. Not exceeding 150 mm thick well watered, rammed fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.

Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, scaffolding raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4(1cement :2coarse sand(zone-iii):4 graded stone aggregate

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, propping etc. and removal of form forSmall lintels not exceeding 1.5 m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like

Centering and shuttering including strutting, propping etc. and removal of form forWeather shade, Chajjas, corbels etc., including edges

Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landing, beams and balconies (Plan area to be measured)

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Suppling, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows, skylight, fanlights and coceletial windows openings, including wedge over all clamps all complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/l

providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing with , cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position (including cariage of bars to work site) all complete as per building specification and direction of E/I. TMT Fe 500( onle valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)

providing Tor steel reinforcement of 10mm,12mm,16mm. dia bars as per approved design and drawing approved design and drawing with , cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position (including cariage of bars to work site) all complete as per building specification and direction of E/I.

(a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}

(b) 12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})

(c) 16mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})

providing Tor steel reinforcement of 20mm,25mm, 28mm & 32mm. dia bars as per approved design and drawing approved design and drawing with , cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position (including cariage of bars to work site) all complete as per building specification and direction of E/I.

20/25/32mm TMT bar Fe 500 (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})

Supplying fitting and fixing M.S.Grill made of 20x6mm M.S.flat square bar as per approved design and drawing properly fabricated with joints continuous fillet welded and finished smooth carriage of grill to work site,hoisting as per building specification and direction of E/I(where materials is not supplied by the deptt)

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and laying matt finished vitrified tile of size 300x300x9.8mm havingwith water absorption less than 0.5% and conforming to IS: 15622 of approvedmake in all colours and shades in for outdoor floors such as footpath, courtyard, multi modals location etc., laid on 20mm thick base of cement mortar1:4 (1cement : 4 coarse sand) in all shapes & patterns including groutingthe joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Providing 12mm thick cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm thick cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all complete as per building specification and direction of E/I.

Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

waterproofing for old land new roof slab providing and laying water proofing treatment on roof slab by applying two component factory designed ready to use acrylic modified flexible materials applied with brush,roller or spray for water proofing coating as per manufacturer specification with foollwing steps:-

a)surface prepaation-providing and cleaning of concrete surface to remove dust oil grease including removal of existing loose paint/coating and cement laitance by cleaning with compressed air & water jet including all materials,labour,tools complete ponding test to be done after plugging all outlets and to be checked from soffit to indentify seepage,leakage.On indentification of seepage,cement grouting to be done with non shrink expanding admixture of sika India Pvt.Ltd/MYK schomberg/Dr.Fixit/Fosroc or equivalent.Providing and reparing of all conners and joints such as those between the parapet wall and the roof slab etc.shall be chamfered with 150mmx150mm fillet of mortar cement sand 1:4) admixed with acrylic polymer of sika/Fosroc/MYK schomberg/Dr.Fixit or equivalent.Before chamfering a prime coat shall be given with the using of arcylic polymer Reparing surface irregularities,damaged concretein base slab,dead cracks if any,with an acrylic polymer modified repair mortar including a coat of bonding agent of the same with cement shurry including all materials,labour tools commplete.

(b)Ist coat-Applying Ist coat of two component acrylic modified ready to use flexible cementitious mataerials on surface saturated dry roof and in side wall of parapet wall upto 600mm by brush or roller after Ist coat of application 45 grm of Fibre glass cloth to lay when the first layer is still green,Ist coat should be applied @ 1.5kg/sqmt/coat.For the purpose of measurement the entire treated surface will be measured.-

(C) 2nd coat to apply the 2nd coat of two compounent anylic modified ready use Flexible cementitious materials right angle to the Ist coat over the glass fibre laid surface,2nd coat should be applied @ 0.7kg/sqmt/coat .For the purpose of measurement the entire treated surface will be measured.After three days of drying the 2nd coat,The rain water outlets to be plugged and ponding test to be done for 48 hours to indentity seepage,leakage from soffit and if found necessary rectification to be deon as per satisfaction of E/C.The waterproof coating to be protected from damage before screed over it.Water proofing coating to be protected from damgae before screen over it.Water proofing Brand sika Topseal 109hi/Fosroc Brushbod RFX/Dr fixit pidiffin 2K/MYK Aquafin TG.Product performance chemical,Base part A,Acrylic copolymer,PartB-specially graded cementtitious powder Density 1.6 kg/1(,mixed density) at + 27°C-Tensile strength-2N/mm2 after 28 days(with Fibre cloth)(According to ASTM D 2370)Pullout Bond strength-2N/mm2(concrete failure)(According to ISO 4624)Slant shear Bond strength-4N/mm2(According toFIP 5.15) Elongation at Break-35# without Fibre cloth and 20% with Fibre cloth(According to ASTMD 2370)

(d)Protection of treapled surface with PCC-The treated surfaace should be covred with 25mm /50mm PCC of M-20 grade(1:1.5:3) with proper slope(1:120) towards the rain outlets in allernatepenels of 2mtx2mt keeping 6mm gap between the panel joint Integral water proofing admixture conforming to IS 2645 @ of 100ml per bag of cement to be added in the screed concrete (paid separately for this items) All corners shall be chamfered with 150mm fillet.The rainwater outlets shall be just leveled with screed concrete to ensure smooth discharge of water-The peripheral gaps between Pvc pipe outlet and concerte surface should be packed properly with rich concrete and the peripheral mouth to be sealed with moisture insensitive epoxy putty of sika India pvvt.Ltd/MYK.schomberg/Dr.Fixit/Fosroc.For the pupose of measurment the entire treated surface will be measured;

(e) Groove of PCC surface should be filled with polysulphide sealant(paid separately)Brand-sika India Pvt Ltd/MYK schomberg/Dr.Fixit/Fosroc warrantly for five years.

Covering of treated surface with PCC-Providing 25mm thick cement M20(1;1.5:3) mainting slope in afternate 2mtx2mt penels with approved quality of stone chips of 20mm to 6mm sze graded and graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer with admixtue of interat water proofing and placing in position stacking curing taxes and royalty all complete as lper buildinglspecification and direction of E/I. panels that has been left should be casted next day .there should be 6mm gap between panels Brands sized plastticcoate plus MYK proof WP10,Fasruc complast x421 ic. Dr Fixit pidipoor LW

Providing 19mm thick water proof cement plaster(1:3)with clean coarse Isand F.M 1.5with integral water proofing compound liquid @125ml per bag cement including screening,curing with all leads and lift of water ,scaffolding taxes and royalty all complete as per building specification and direction of E/I. Brand-Fosroc-conplastX421C Sika-plastocrate plush, Dr fixit pidiproof LW+,MYK proof WP 10 or Equivalent.

Providing and fixing 18mm thick Gang saw cut mirror polished, pre molded and pre polish machine cut for kitchen platforms, vanity counters windows sills, facias and similar locations of required size approved shade,colour and , texture laid over 20mm thick base cement mortar 1:4(1 cement:4 coarse sand) joints treated with white cement ,mixed with matching pigment, epoxy touch ups ,including rubbing, curing moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite Stone slab of colour black,chrry /Ruby red ,area of slab over 0.50sqmm

Providing edge moulding to 18mm thick marble stone counters venities etc.including maching polishing to edge to give hight gloss finish etc complete as per design approved by E/I.Granite work

Extra for fixing marble/granite stone over and above corresponding basic item in facia and drops of width upto 150mm with epoxy resin based adhesive including cleaning etc.

Providing and fixing panic bar / latch (Double point) fitted with a singlebody, Trim Latch & Lock on back side of the Panic Latch of reputed brandand manufacture to be approved by the Engineer- in- charge, all complete.

Providing and fixing factory made Upvc glazed /wire mesh windows/doors comprising of lead free uPVC multi-chambered fame,sash and mullion/coupler (where eve required)extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for series R3 and R4 profiles conforming to EN 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape &size as prCPWD specification,UPVC extruded glazing beads,interlocks and inline sash adaptor ( where ever required) of appropriate dimensionEPDM gasket,hardware,SS 304 grade fasteners of miniumi 8mm dia with countersunk head,comprising of matching kpolyamide PA6 grade sleeve for fixing frameto finished wall asper IS 1367:part 1 to 14,plastic packers,plastic caps and necessary stainless steel screws etc Profile of frame,sash &mulion ( if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all comers,including drilling of holes for fixing hardware and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality all compelte as per approved drawig conforming to CPWD specification and direction of E/I wire mesh/Glazing of plain/toughened/laminated/double glass unit with/without high performance coatings as per design requirements and conforming to IS:3548 & IS:16231 shall be paid separately.(Note-structural design proof checked from a Goverment Engineering Institure,to be provided by the manufacturer for (i)sites with basic wind speed> 45m/sec as per IS 875-part 3(ii)sites with structure height more than 20m for all wind speeds.

Three track three panels sliding window with two glazed & one wire mesh panels with aluminium channel for roller track,wool pile,nylon rollers with SS 304 bodyUsing R4 series withframe (115mm& above)x(45mm&above)& both glazed and fly screen sash (44mm &above)x(55mm&above) with zinc alloy(zamak)powder coated handle on every glazed panel along with multi point locking ksystem(height above 1.8m)

Providing and fixing glazing in aluminium door, windows ,ventilator shutters and partitions etc with EPDM rubber/neoprene gasket etc complete as per the architectural drawings and the directions of E/I.(cost of aluminium snap beading shall be paid in basic item) with float glass panes of 5.0mm thickness(weight not less than 12.50kg/sqm)

Providing and fixing fly proof wire gauze to windows,clearstory windows& doors with M.S.flat 15x3mm and nuts & bolts complete Galvansied M.S.wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides including all complete job.as per direction of E/I.

supplying, fitting and fixing 250X20X6mm L-type M.S clamp properly fishtailed, including maiking holes and setting as same in 250X125X75mm. Cement concrete block (1:2:4) with cost of all labour and materials and taxes as per building specification and direction of E/I.

Providing and fixing circular/Hexagonal cast iron or M.S.sheet box for ceiling fan clamp,of internal dia 140mm,73mm height k,top lid of 1.5mm thick M.S.sheet with its top surface hacked for proper bonding,top lid shall be screwed into the cast iron/M.S.sheet box by means of 3.3mm dia round headed screws,one lock at the corners.clamp shall be made of 12mm dia M.S.bar bent to shape as per standard drawing.

Providing and fixing stanless steel(Grade 304) railing made of Hollow tubes,channells,plates etcincluding welding,grinding,buffing,polishing and making curvature( wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,I/C fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steel bolts etc,of required sizie,onthe top of the floor or the side of waist slab with suitable arrangment as per approval of Engineer-incharge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessoreis such as nuts,bolts,fastners etc)

Supply of 12mm thick Toughened glass approved quaility including all complete job as per direction of E/I.

roviding and laying polished vitrified tiles in floor in different sizes(Thickness to be specified by the manufacture) with water absorption’s less than 0.08% and conforming to IS:15622 of approved brand & Manufacturer in all colours and shades,laid on20mm thick cement mortar 1:4(1cement:4 coarse sand)jointing wth grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., The tiles must be cut with the zero chipping diamond cutter only.Laying of tiles will be done with the notch trowel,plier,wedge,clips of required thickness,leveling system and rubber mallet for placing the tiles gently and easily.Glsazed viterified floor tiles including all complete. Glazed vitrified floor tiles polished finish of (size 600x1200mm)

Providing and fixing false ceiling at all height including providing andfixing of frame work made of special sections, power pressed fromM.S. sheets and galvanized with zinc coating of 120 gms/sqm (bothside inclusive) as per IS : 277 and consisting of angle cleats of size25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dashfastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flangeof cleat fixed to the angle hangers of 25x10x0.50 mm of requiredlength with nuts & bolts of required size and other end of anglehanger fixed with intermediate G.I. channels 45x15x0.9 mm runningat the spacing of 1200 mm centre to centre, to which the ceilingsection 0.5 mm thick bottom wedge of 80 mm with tapered flangesof 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,shall be fixed in a direction perpendicular to G.I. intermediate channelwith connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mmthick 27 mm high having flanges of 20 mm and 30 mm long, theperimeter of ceiling fixed to wall/partition with the help of rawl plugsat 450 mm centre, with 25mm long dry wall screws @ 230 mminterval, including fixing of gypsum board to ceiling section andperimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, including jointing and finishing to a flush finishof tapered and square edges of the board with recommended jointingcompound , jointing tapes , finishing with jointing compound in 3layers covering upto 150 mm on both sides of joint and two coats ofprimer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitablyfixed, all complete as per drawings, specification and direction ofthe Engineer in Charge but excluding the cost of painting with

12.5mm thick tapered edge gypsum moisture resistant boarad.

Providing &Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone patter with anti algae and Uv resistace properties to be aapplied as intermediate fiish in desired pattern @ 43.04 kg/s10 sqm to form film of 1-1.5mm thickess after scrapping and propperly cleaning the surace to remove loose particles from the plaster surface,followed by top coating with premium acrylic smooth exterior paint with silicone additives of required shade by two or more cots @ 1.43 litre/10sqm,complete as the direction of E/I.

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer,over the plastered wall suface to prrepare the surface even and smooth complete.job as per direction of E/I.

Steel work in built up tubular ( round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. complete Hot finished seamless type tubes

Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

sand lead 8K.M.

Stone Metal 20 km lead

chips lead 22K.M.

Brick lead 8K.M(1K+7P)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes.

110mm diameter

Providing and fixing on wall face unplasticised PVC moulded fittings, accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring confirming to I:5382 leaving 10mm gap for thermal expansion.

single tee with door 110x110x100mm

Single tee without door 110x110x100mm

Bend 87.5° 110mm

shoe(plain)110mm dia

Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50mm hard wood plugs,screwed with M.S screws of required length, including cutting brick work and fixing in cement mortar 1:4(1cement:4 coarse sand) and making good the wall etc.complete.

110mm dia

Providing and fixing to the inlet mouth of rain wataer pipe cast iron grating 15cm diameter and weighting not less than 440grams.

Providing and fixig P.V.C.waste pipe for sing or wash basin including P.V.C.waste fittings complete semi rigid pipe 32mm dia including all complete job.

Providing and fixing Chlorinated polyvinyl chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e. fixing the pipe with clamps at 1.m.spacing.This included jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(Internal work)(Concealeld work)

20mm dianominal outer dia pipes

Providing and fixing Chlorinated polyvinyl chloride (PVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings..This included jointing of the pipes & fittings with one step CPVC solvent cement trencing,refilling & testing of joints complete as per direction of E/I. concealed work including cutting chases and making good the walls etc.(External work)

25mm dianominal dia pipes

32mm dia

40 mm dia

Providing and placing on terrace(at all floor levels) polyethylene water storage tank ISI 12701 marketed with cover and suitable locking arrangement and making necessary holes for inlet ,outlet and overflow pipes but without fillings and the base supported for tank.

Providing and fixing PTMT extension nipple for water tank pipe fittings of approved quality and colour 15mm nominal bore weighing not less than 32gms.

Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750 mm deep, 600 x 450 internal dimension having 250 mm wall thickness in cement mortar ( 1:6 ) including 12 mm cement plaster ( 1:4 ) with punning on inside and cement plaster (1:6 ) with 600 x 475 mm G.I. cover with frame (Weight not less than 36 Kg.) in foundation and refilling all complete as per specification and direction of E/l.

Providing and fixing toilet paper holder C.P.brass including all complete job.

Wiring for light/fan point/exhaust fan point/call bell Point with 1.5 sq.mm FRPVC insulated copper Conductor single core cable in surface/recessed PVC conduct with Modular type switchmodular plate, Suitable size G.I Box etc. as required.

group C

Twin control point wiring in PVC conduit withModular type switch-wiring for Twin control light point with 1.5sqmm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit 2 way Moodular type switch,Modular plate,suitable size etc as required.

Wiring for light / Power plug with 2×4 sq mm FRPVC in insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 nos 4 sqmm. FR PVC insulated copper conductor single core cable for loop earthing as required .

Supplying and drawing following sizes of FRPVC insulated copper conductor,single core cable in the existing surface/recessed steel/PVC conduit as required.

2x1.5 sqmm

Wiring for circuit/submain wiring along with earth wiring with the following sizes FR PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required.

2x1.5sqmm+1x1.5sqmm earth wire

2x2.5sqmm+1x2.5sqmm earth wire

4x6sqmm+2x6.0sqmm earth wire

S/F Suitable size G.I.Box with moudular plate and cover in in front on surface of a recesses including providing and fixing 3pin 5/6 Amp Modular socket outlet and 5/6 amp.Modular switch connection as painting etc. as req. (for light plugs to be used in non residential building)

S/F Suitable with modular plac and cover in front G.I.Box on surface/Recess with suitable size or in recess including providing and fixing 6 pin 15/16 Amp socket outlet and 15/16 amp.,modular switch connection as painting etc. as req.(for light plugs tobe used in non residental building)

S/F Modular type switch/socket supplying and fixing following modular type switch/socket on the existing modular plate and switch box including connections but excluding modular plaate etc as reqd.

T.V antenna socket outlet

S/F Modular type electronic fan regularor_Supplying and fixing stepped type fan regulator on the existing modular plate swith box including connections but excluding modulalr plate etcas required.

sUPPLYING AND FIXING MODULAR BLAMKING PLATE ON THE EXISTING MODULAR PLATAE & SWITCH BOX EXCLUDING MODULAR PLATE AS REQUIRED.

Installation testing and commissioning of pre-wired, fluorescent fitting/compact fluorescent fitting of all types,complete with all accessoreis and tube etc. directly /wall including connection with 1.5 sqmm FRPVC insulated,copper conductor,single core cable and kearthing etc as required.

I.T.C of ceiling fan including wiring the down rods of standard length(up to30cm) with 1.5 sqmFRPVC with1.5sqmmFRPVCinsulated copper conductor single core cable etc as reqd.

Supplying and fixing the following way,horizontal type three pole and netural, sheet M.C.B.ditrubutionbaord,415volts, on surface/recess, complete with tinned copper busbar, neutral bus bar, earth bar,din bar, interconnection powder painted including earthing etc as required ( butwithout MCB/RCCB/Insolator)

4way(4+12) Double door,Horizontal type

S/F of 6Amp to 32amp amprating 240 volt 10KA including all complete job as per direction of E/I.

6/32Amp single polle

40 amps, TPN

50/63 amps TPN

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of size not exceeding 35sqmm direct in ground including excavation,sand cushioning,protective covering and refilling the trench etc as requied.

S.I.T.C of floowing rating recess/surface mounted LED round/square shape down light Luminarie with prfessurfe die cast housing for single phase supply voltaage .Luminarie shall be confirm to IS:10322 Part 5/section-2 or JEC:62722 with all neccssary accessories as required

15/16 W LED Round Down light

Supply Installation,testing and commissioning of follwing size ceiling fan 3 Bleades confirming to IS:374:2019 including wiring the down rods of standard length(upto 30cm) with 1.5 sqmm FR PVC insulated ,copper wire suitable for 230V 50Hz,single phase supply etc.complete as required.

1200mm(48")BI DC 5 star rating 32W ceiling Fan

S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230 V 50Hz,single phase supply etc.complete as required.

20/32 W LED Tube light

Supply of A.C.1.5 Tr.5 star split A.C.(inverter type) IS 1391-part-II (Makke Hitachi,Daikin,carrier)including all complete job.

Supply of copper Tube of size 1/4" for aplit ac unit 1/1.5/2/3 Tr capacity including all complete job.

Supply of copper tube of size 1/2" for splite ac unit 1/1.5/2/3 tr capacity including nitride rubber all complete job.

Supply of 5 KVA wall mounted automatic voltage stablizer from range 140V to 280V including all complete job.

Supply of sitc drain water pipe insulation 20mm including all complete job.

Supply of out door stand for 1.5 tr splite AC including all complete job.

Supply of PVC/XLPE insulated PVC sheathed heavy duty armoured electric cable with aluminium conductor for working voltage upto and including 1100 volts ( conforms to IS 1554 part-1) 35 sqmmx3.5core

Supply fitting and fixing and testing of building outer lighting luminaire aerodynamically shaped single piece pressure die cast Aluminum luminaire with high power LEDs as light source and electronic driver(IP65),along with 45/48W,LED Lamp,as Energy saving as per drawing prescribed reflector and heat resistant toughened flat glass cover,with 5ft long 40mm dia G.I.pipe with 3nos of iron clamps,anchor nut bolts with double washers as per direction of E/I.or consultant as per drawing prescribed reflector and heat resistant toughened flat glass cover(IP-65) and in compliace to Iec.SAFETY STANDARDS lm 79 AND lm 80 REports to be submitted with all accessories Make: Trilux/Lighting Technology/philips.

Supply of 25 sqmm aluminiulu lugs including all complete job.

Supply of 35 sqmm aluminiulu lugs including all complete job.

S/F following capacity busbar chamber with 4 strips of length 300mm made of copper suitable for following,capacity complete with all accessories including connection,earthing the body etc as reqd..

Providing and fixing following TP&N disconnector fuse switch unit in the existing metal board with ISI marked HRC fuses including drilling holes in metal board,making connections etc as required.

100 amps,TP&N,HRC

Providing & fixing chaukhats panneling with wooden framed by 12mm thck both side best quality ply and 4mm thick water proof laminate pasting,finishing with all materials and labour all complete job as per building specification and direction of E/I.

Providing and fixing 30 mm door shutter with wooden framed by both side best quality ply -4mm thick water proof laminate both side pasting finishing with melamine paint with all materials and labour all complete (including all fancy type fitting)as per building specifiction and direction of E/I.

Supplying fitting and fixing of Universal Door closer(suitable for both anti clockwise and clockwise door swithout any change in the parts of closer)including all completejob.

Supplying fitting and fixing of chjuan sun screen Roller Blind (Mtcafrb 186) product id 5116877-98162501314 including all complete job as per direction of E/I.

Providing and fixing wardrob or book self unit/Almirah with 19mm ply wood over sunmica including allmaterials,labour,taxes all complete as per building specification and direction of E/I.ply Board-19mm thick green,centure or ISI mark water proof ply Grade,outside Laminate:1.5mm thick green Lam/century Lam, inside Laminate-1.5 mm thick Green lam/century Lam channel/soft closing hinge:-Hetich(202 S.S.grade) lock of Furniture:Godrrej/cent,Handle/Jali-Brass/S.S.finish Handel,Door closer-Helix/Ebco/Hettich/Yama(202-SS grade) edge Binding-same Laminate/PVC

Supplying fitting and fixing of RK EMPIRE Revolving chair with knee Tilt synchronic Exective chair/Boss chair Product id:5116877-94815640456 including all complete job.

Supplying fitting and fixing of DNR SYSTEMS Revolving chair with Arm Tilt working with torsion bar mechanism(Revolving chair 02) Product id:5116877-7891496415 including all complete job.

Providingn and fixing ISKON-G Bathroom or Toilet Mirror Hanging system ISKON Mirror Prduct id: 5116877-76230367352 including all complete job.

Supplying fitting of ADHUNIK SWITCHGEARS 450MM Connection pipe wuth nuts product id: 5116877-9290703887 including all complete job.

Supplying and fixing shakti 15MM Brass(Extruded Rolled,cast,die cast)Stop valve(CP ANGLE COCK,HW8206)product id:5116877-74826652122 including all complete job.

Supplying and fixing of Jaquar wash down water closet (EWC) MAKE IT Jaquar P trap pattern 3(Fig 2A)water closet(DSR-WHT 37953 BIUFSM) Product id 5116877-59437028766 including all complete job as per direction of E/I.

Supplying and fixing of parryware visterous china sinks/wash basin product id 5116877-5580405717 including all complete job.

Supplying and fixing of 2 way Bib cock for health faucet Product id: 5116877-46224966212including all complete job.

Supplying and fixing of health faucet with 1meter long Easy flex tube in chrome finish & wall flap including all complete job.

Supplying and fixing of PRIMA 15MM BRASS(EXTRUDED,ROLLELD,CAST DIE CAST) STOP valve(Mixed End) Product id: 5116877-20885394180including all complete job.

Supplying fitting of Vijay waste fitting for size 32mm dia product id 5116877-98475055076 including all complete job.

Supplying and fixing of Towel rail make it jaquar with c at no (Single Towel rain 600mm(AKP-35711P) and product it 5116877- including all complete job.

Supplying fitting of CAVIER 15MM leaded Tin Bronze Fancy Tap (SO 04-205 CAVIER SINGLE LEVER 6")product id: 5116877-56740054860including all complete job.

Supplying fitting of pride LIQUID SOAP DISPENSER,capacity 100 mililiter product id: 5116877-37197799589 including all complete job.

Supplying fitting of PRIMA Towel Rail cast Brass Grade LCB-2 OF IS:292/1983. product id: 5116877-20934319528 including all complete job.

Supplying fitting ofPRAYAG Floor Drain(Waste Jali) Traps having Round shape and made up of SS 202 Prayag(Round Trap Prayag CAT -FT 71) product id: 5116877-73841646089 including all complete job.

Supplying fitting and fixing of BAJAJ 25 liter 4 star water Heater in all complete job.Product id: 5116877-99621432880

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

K & G ASSOCIATES (BID ID -678912)